| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth,1.5m in width as well as 10 sqm on plan) including disposal of excavated earth , lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.- All kinds of soil. | 2.6.1 | 50 | cum |
|---|
| 2 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:2:4 (1 cement:2coarse sand : 4 graded stone aggregate 20mm nominal size) | 4.1.3 | 26 | cum |
|---|
| 3 | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size) | 4.1.10 | 30 | cum |
|---|
| 4 | 4 | Providing and fixing of 65mm Godrej Navtal lock of 7 levers with 3 keys etc complete | 9.134.2 | 2 | Nos. |
|---|
| 5 | 5 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. | 11.3.1 | 17 | sqm |
|---|
| 6 | 6 | Providing and fixing 1mm thick M.S. sheet door with frame of 40X40X6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40X40X6mm for diagonal braces. | 10.5.1 | 8 | sqm |
|---|
| 7 | 7 | Steel work welded in built up section/ framed work including cutting hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating, frames, guard bar, ladder, railings, brackets, gates and similar works. | 10.25.2 | 4150 | kgs |
|---|
| 8 | 8 | Supply and installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved) 0.50mm +/- 5% total coated thickness (TCT) thick Zinc coating 120 gsm as per IS:277 in 240 mpa steel grade , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x55mm) with EPDM seal or with polymer coated J or L hooks , bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins , rafters and trusses and including cutting to size and shape wherever required. | 12.5 | 330 | sqm |
|---|
| 9 | 9 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm + or- 5% total coated thickness (TCT), zinc coating 120 gsm asper IS:277 in 240 mpa steel grade, 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G I seam bolts and nuts, G I plain and bitumen washers complete: Crimp curve. | 12.51.5 | 19 | mts |
|---|
| 10 | 10 | 12mm cement plaster of mix cement mortar 1:4 (1 cement : 4 coarse sand) | 13.4.1 | 121 | sqm |
|---|
| 11 | 11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work. | 13.61.1 | 165 | sqm |
|---|
| 12 | 12 | Finishing walls with Acrylic Smooth exterior paint of required shade - New work (Two or more coat applied @ 1.67 ltr / 10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg / 10 sqm) | 13.46.1 | 121 | sqm |
|---|
| 13 | 13 | Brick work with FPS bricks of class designation 35 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) | 6.1.1 | 42 | cum |
|---|
| 14 | 14 | Half brick masonry with FPS bricks of class designation 35 in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement: 4 coarse sand) | 6.13.2 | 5 | sqm |
|---|
| 15 | 15 | Reinforced cement concrete work in beams , suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | 5.3.1 | 3 | cum |
|---|
| 16 | 16 | Reinforcement for R.C.C work including straightening , cutting , bending , placing in position and binding all complete - Thermo - Mechanically treated bars (TISCON / VIZAG / IISCO /SAIL / JSW) including placing the M30 grade Athees make cover block @ 60cm centre to centre | 5.22.6 | 300 | kgs |
|---|
| 17 | 17 | Centring and shuttering including strutting, propping etc.and removal of form for:Foundations , footings, bases of columns ,etc. for mass concrete.- Using steel sheet with M.S.frames | 5.9.1 | 85 | sqm |
|---|
| 18 | 18 | Providing, laying and jointing UPVC pipes(Finolex/Jain) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 110mm dia. | 31.161.1F | 12 | mts |
|---|
| 19 | 19 | Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Shoe (plain)110mm shoe. | 12.42.6.2 | 2 | Nos. |
|---|
| 20 | 20 | Supply of Quary rubbish including stacking to department gauge for premeasurement and spreading required thickness as directed by the Engineer-in-charge. | 30.7 | 22 | cum |
|---|
| 21 | 21 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. - Granite of any colour and shade - Area of slab over 0.50 sqm | 8.2.2.2 | 8 | sqm |
|---|
| 22 | 22 | Supplying and welding at site mild steel sheet - 1mm thick and painted with two or more coat of enamel paint of approved shade over a cost of primer (Painting to be paid separately) | Non PSR1 | 33 | sqm |
|---|
| 23 | 23 | Hire charges for engaging front end loader 1cum capacity for clearing the accumulated solid waste and loading to the tipper / tractor, for disposal at the stock yard. The rate shall include the hire charges for machinery, operating staff, fuel charges, lubricants etc., complete as directed by the Engineer-in-charge. | Non PSR2 | 8 | Hrs. |
|---|
