Military Engineer Services-MES has published Special Repairs To Bldg No T2 Saramati Hq 3 Corps Guest Room Of 3 Cesr Incl Provision Of Certain Lbw And Revenue Works Under Age Br I , Age Br Ii And Age E M Of Ge 868 Ews Rms. Submission Date for this Tender is 18-02-2020. Building Repair Tenders in Rangapahar Nagaland. Bidders can get complete Tender details and download the document.
| Name of Work: : SPL REPAIRS TO BLDG NO T-2 (SARAMATI) HQ 3 CORPS GUEST ROOM OF 3 CESR INCL PROVN OF CERTAIN LBW AND REVENUE WORKS UNDER AGE B/R-I, AGE B/R-II AND AGE E/M OF GE 868 EWS RMS (JOB NO:- RP/SR(B)/22/2018-19, RP/LBW/32/2018-19, RP/LBW/31/2018-19, RP/LBW/27/2018-19, RP/RW/004/2019-2020 RP/RW/005/2019-2020) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in post holes n. exc 0.50m and getting out in soft/loose soil. | 8 | Each | |
| 2 | 2 | M&L for surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil. | 30 | Sqm | |
| 3 | 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth in hard / dense soil; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed by Engr-in-Charge | 1 | Cum | |
| 4 | 4 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth in soft/loose soil; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed by Engr-in-Charge | 40.17 | Cum | |
| 5 | 5 | Excavating over areas in soft/loose soil, n exc 1.5 m deep and getting out complete all as specified and directed by Engr-in-Charge | 65 | Cum | |
| 6 | 6 | Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed by Engr-in-Charge. | 24 | Cum | |
| 7 | 7 | Removing excavated soil material exc. 250 m but n exc. 500 m and depositing complete all as specified and directed by Engr-in-Charge | 47.58 | Cum | |
| 8 | 8 | M&L removing exacavated soil n. exc. 50m and depositing where directed at a level n. exc. 1.5m above starting pointcomplete all as specified and directed by Engr-in-Charge | 29.07 | Cum | |
| 9 | 9 | M&L for loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells | 2 | Cum | |
| 10 | 10 | M&L for loose filling with broken bricks aggregates of gauge 40 to 80 mm in soakage pits, soakage wells | 8 | Cum | |
| 11 | 11 | M&L Cement concrete Type D2 1:4:8 (40 mm graded in foundations,filling and mass concretecomplete all as specified and directed by Engr-in-Charge | 9.5 | Cum | |
| 12 | 12 | M&L PCC 1:4:8 type D-2 75mm thick as in sub base of floor. | 14 | Sqm | |
| 13 | 13 | M&L for cement concrete 1:3:6, type C2 (40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge | 21 | Cum | |
| 14 | 14 | M&L for RCC M-25 Design mix as in foundation, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc basement slabs under reamed piles and mass concrete. | 4.5 | Cum | |
| 15 | 15 | M&L for RCC M-25 Design mix as in columns, pillars, piers, posts and struts. | 2.5 | Cum | |
| 16 | 16 | M&L for RCC M-25 Design mix slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. | 1.7 | Cum | |
| 17 | 17 | M&L 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) as damp proof course to horizontal or vertical surfaces including necessary form works, applying evenly a coat of blown type bitumen at 1.50 kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm including 150 micron thick polythene film laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm complete | 5 | Sqm | |
| 18 | 18 | Providing pre cast cement concrete type B- 1, 1;2:4 (20mm graded aggregate) in cover slabs (for man holes etc) and similar articles with plain faces set in cement mortar 1:4. | 0.1 | Cum | |
| 19 | 19 | M&L brick work with sub class "B" bricks straight or curved in plan exceeding 6 mtr mean radius built in CM(1:6) using old size bricks complete all as specified and directed by Engr-in-Charge | 70 | Cum | |
| 20 | 20 | M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed by Engr-in-Charge | 79.45 | Cum | |
| 21 | 21 | M&L precast cement concrete 1:3:6, type C1(20mm graded stone aggregate) as in Kerb stone/bond stone. (Reduced rate for less stone masonary ie Rs 4325.60 - Rs 1898.90 = Rs 2426.70) complete all as specified and directed by Engr-in-Charge | 1.97 | Cum | |
| 22 | 22 | M&L Cement concrete 1:3:6 type C-1 (20 mm graded agg ) in surface channels and drains. | 1 | Cum | |
| 23 | 23 | M&L reinforcement TMT bars 10 mm dia, cut to length, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250 for stretched wire complete all as specified and directed by Engr-in-Charge | 570 | Kg | |
| 24 | 24 | M&L reinforcement TMT bars 6mm to 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250 complete all as specified and directed by Engr-in-Charge | 45 | Kg | |
| 25 | 25 | M&L reinforcement TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250 complete all as specified and directed by Engr-in-Charge | 250 | Kg | |
| 26 | 26 | Use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc. | 10 | Sqm | |
| 27 | 27 | Use and waste of formwork to sides of pillars posts, struts, piers, columns and stanchions finished the suface rough. | 25 | Sqm | |
| 28 | 28 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. | 25 | Sqm | |
| 29 | 29 | M&L formwork to roughly finished surface of concrete to soffits of suspended slabs such as roof slabs,floor slabs ,landings and similar work complete all as specified and directed by Engr-in-Charge | 36 | Sqm | |
| 30 | 30 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work for flat and rough finished concrete surfaces complete all as specified and directed by Engr-in-Charge | 6 | Sqm | |
| 31 | 31 | M&L raised pointing to random rubble or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed by Engr-in-Charge | 5.25 | 10 Sqm | |
| 32 | 32 | M&L sand cussion for interlocking tiles all as specified and directed. | 1.5 | Cum | |
| 33 | 33 | M&L preparation of new surfaces & applying two coats cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge | 352 | Sqm | |
| 34 | 34 | M&L rendering 15 mm thick in CM(1:6) on fair faces of brick work or concrete surfaces of wall of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge | 307 | Sqm | |
| 35 | 35 | M&L for Hardcore of gauge n exc. 63 mm, with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed by Engr-in-Charge\n | 5.5 | Cum | |
| 36 | 36 | M&L RCC in cement concrete M-20 20mm graded aggregate as slab supported on walls ,beams and columns in floors,roofs ,landings,balconies,canopies and the like complete all as specified and directed by Engr-in-Charge | 1.89 | Cum | |
| 37 | 37 | M&L for cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) Cement concrete in surface channels and drains complete all as specified and directed by Engr-in-Charge | 5.5 | Cum | |
| 38 | 38 | M&L providing precast cement concrete louvers and jalies, 30mm thick (measured solid), type B-0 (12.5mm graded stone agg) including moulding but excluding frame and set in CM (1:4) complete all as specified and directed by Engr-in-Charge | 73.8 | Sqm | |
| 39 | 39 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed by Engr-in-Charge | 131 | RM | |
| 40 | 40 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge | 90 | Sqm | |
| 41 | 41 | Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets complete all as specified and directed by Engr-in-Charge | 4 | Sqm | |
| 42 | 42 | Dismantling timber scantlings 40 sqcm and over in section unframed work complete all as specified and directed by Engr-in-Charge | 0.55 | Cum | |
| 43 | 43 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed by Engr-in-Charge | 60 | Sqm | |
| 44 | 44 | Dismantling mild steel or wrought iron work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge | 0.2 | Qtl | |
| 45 | 45 | S&F Rolled sections as in roof truss, purlins including cleats GDE Fe 410-0-or Fe 310-0 complete all as specified and directed by Engr-in-Charge | 80 | Kg | |
| 46 | 46 | S&F steel work in tubular trusses including (purlins and rafters) special shaped washers etc complete using ERW or induction butt welded tubes . | 340 | Kg | |
| 47 | 47 | S/F MS plate 6mm thick as in gusset plate incl necessary welding. | 3 | Kg | |
| 48 | 48 | S&F flat iron fillets for wind ties in roof including securing bolts, including all necessary drilling, bolting or revetting, etc and similar work | 6 | Kg | |
| 49 | 49 | S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165. | 10 | Kg | |
| 50 | 50 | S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed. | 785 | Kg | |
| 51 | 51 | S & F Pre-painted galvatume aluminum zinc coating GI vased corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-in-Charge | 160 | Sqm | |
| 52 | 52 | S & F Pre-painted galvatume aluminum zinc coating GI vased Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-in-Charge | 17 | Sqm | |
| 53 | 53 | S/F 2nd class hard wood scantling as in purlins rafters ,& framed work etc clean sawn complete all as specified and directed by Engr-in-Charge | 0.55 | Cum | |
| 54 | 54 | S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size etc complete all as specified and directed by Engr-in-Charge | 73 | Sqm | |
| 55 | 55 | M & L 25mm thick second class hard wood boarding , plained one side with butt joints as in eaves boards complete all as specified and directed by Engr-in-Charge . | 5 | Sqm | |
| 56 | 56 | S&F ventilator with top hung shutter including hinges, steel peg stay complete. | 2 | Sqm | |
| 57 | 57 | S&F 12mm preliminated particle board, exterior grade , preliminated one side with decorative choice limination & other side balancing white lamination ,fixed with screws to timber frame work complete all as specified and directed by Engr-in-Charge | 60 | Sqm | |
| 58 | 58 | M&L Stainless steel Spider auto cocealed hinges for cupboards and wardrobes complete all as specified and directed by Engr-in-Charge | 4 | Each | |
| 59 | 59 | S&F hasp & staple 100 mm aluminium anodised fixed with screws complete all as specified and directed by Engr-in-Charge | 2 | Each | |
| 60 | 60 | S&F hasp & staple 75 mm aluminium anodised fixed with screws complete all as specified and directed by Engr-in-Charge | 2 | Each | |
| 61 | 61 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above ground level complete all as specified and directed by Engr-in-Charge | 1.5 | Cum | |
| 62 | 62 | Dismantaling floor,hearth or wall tilingincluding cement mortar bedding (but not backing),removing serviceable tiles to store and rubbbish off the premises complete all as specified and directed by Engr-in-Charge | 80 | Sqm | |
| 63 | 63 | M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge | 5 | Sqm | |
| 64 | 64 | M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge | 19 | Sqm | |
| 65 | 65 | S&F viterified ceramic tiles 10mm thick n.exc 0.36 Sqm each in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge | 40 | Sqm | |
| 66 | 66 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 Sq.m in each pane. | 1 | Sqm | |
| 67 | 67 | M&L 25 mm thick cement concrete type B0 1:2:4 (12.5 mm graded aggregate) as in level course complete all as specified and directed by Engr-in-Charge | 50 | Sqm | |
| 68 | 68 | M&L for coloured Glazed ceramic tiles in vertical surfaces of size exceeding 0.11 sqm but not exceeding 0.38 sqm, 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge | 5 | Sq.m | |
| 69 | 69 | S&F viterified ceramic tiles 10mm thick n.exc 0.36 Sqm each in verticle surface as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick bedding layer in CM 1:4 complete all as specified and directed by Engr-in-Charge | 5 | Sqm | |
| 70 | 70 | M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge | 40 | Sqm | |
| 71 | 71 | M&L for machine cut Kota stone slab of size 600mm x 600m x 18 to 20 mm thick as in flooring , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finished complete over screed bed of 15mm thick in CM 1:6 complete all as specified and directed by Engr-in-Charge | 5 | Sqm | |
| 72 | 72 | M&L for machine cut Kota stone slab of 18 to 20mm thick, in riser of steps, skirting, dado etc. over & including 10mm thick rendering (bedding layer) in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finished complete all as specified and directed by Engr-in-Charge | 5 | Sqm | |
| 73 | 73 | M&L for plain cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete, sub base complete all as specified and directed. | 0.5 | Cum | |
| 74 | 74 | M&L 75 mm thick cement concrete type C2 1:3:6 (40 mm graded aggregate) as in plinth protection, using extra cement for finishing complete all as specified and directed by Engr-in-Charge | 45 | Sqm | |
| 75 | 75 | M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed by Engr-in-Charge | 1.85 | Cum | |
| 76 | 76 | Taking down chowkhat or frame not exc 1.5 sqm each (with out taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge | 6 | Each | |
| 77 | 77 | Taking down chowkhat or frame exc 1.5 sqm not exc 4 sqm each (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge | 3 | Each | |
| 78 | 78 | Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each complete all as specified and directed by Engr-in-Charge | 2 | Leaf | |
| 79 | 79 | Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed by Engr-in-Charge | 2 | Leaf | |
| 80 | 80 | M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and directed by Engr-in-Charge | 0.25 | Cum | |
| 81 | 81 | M&L 35 mm thick 2nd class HW plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge | 2 | Sqm | |
| 82 | 82 | M&L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge | 4 | Sqm | |
| 83 | 83 | M/L 35mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified and directed by Engr-in-Charge | 2 | Sq.m | |
| 84 | 84 | M/L 30mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed by Engr-in-Charge | 2 | Sq.m | |
| 85 | 85 | M/L 30mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed by Engr-in-Charge | 4 | Sq.m | |
| 86 | 86 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing fixing new ones complete all as specified and directed by Engr-in-Charge | 1 | Sqm | |
| 87 | 87 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge | 6 | Sqm | |
| 88 | 88 | S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge | 2 | Sqm | |
| 89 | 89 | M & L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. .5 sqm each pane complete all as specified and directed by Engr-in-Charge | 3 | Sqm | |
| 90 | 90 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge | 10 | Sqm | |
| 91 | 91 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge | 30 | RM | |
| 92 | 92 | S&F powder coated of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge | 50 | Kg | |
| 93 | 93 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section. | 12 | Each | |
| 94 | 94 | M&L stainless steel butt hinges, 75 mm long size complete all as specified and directed by Engr-in-Charge | 18 | Each | |
| 95 | 95 | S&F 100mm medium weight butt hinges cold rolled mild steel. | 18 | Each | |
| 96 | 96 | M&L stainless steel butt hinges 100 mm thick complete all as specified and directed by Engr-in-Charge | 18 | Each | |
| 97 | 97 | S/F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long complete all as specified and directed by Engr-in-Charge | 10 | Each | |
| 98 | 98 | S&F Aluminium handle cast type anodised 150 mm long complete all as specified and directed by Engr-in-Charge | 22 | Each | |
| 99 | 99 | S&F 125mm size aluminium handles,cast type,anodised complete all as specified and directed by Engr-in-Charge | 12 | Each | |
| 100 | 100 | S&F aluminium hat & coat hooks solid body 125 mm to 175 mm fixed with brass screw complete all as specified and directed by Engr-in-Charge | 2 | Each | |
| 101 | 101 | S/F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section(300 mm long) complete all as specified and directed by Engr-in-Charge | 2 | Each | |
| 102 | 102 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed by Engr-in-Charge | 4 | Each | |
| 103 | 103 | S&F Bathroom cabinet of size 16" x 18" x 4" with three cabins with covers , one with looking mirror complete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 104 | 104 | Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge | 50 | Sqm | |
| 105 | 105 | Supply only integral water proofing compound complete all as specified and directed by Engr-in-Charge | 35 | Kg | |
| 106 | 106 | Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excl ashalar facing complete all as specified and directed by Engr-in-Charge | 2 | Cum | |
| 107 | 107 | M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engr-in-Charge | 21 | Sqm | |
| 108 | 108 | M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by wt of cement finished fair faces of brick/concrete surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge\nNote : WPC will be measured and paid separately. | 66 | Sqm | |
| 109 | 109 | Demolition of reed lathing single or double inclduing batten and plaster or chicken wire lathing complete all as specified and directed by Engr-in-Charge | 5 | Sqm | |
| 110 | 110 | M&L preparing new plaster surfaces of wall and applying three coats of white wash on walls. | 1 | Sqm | |
| 111 | 111 | M&L 18 mm thick plastering in CM 1:4 on one side of lathing in two separate layers even and smooth without using extra cement incl WPC complete all as specified and directed by Engr-in-Charge\nNote : WPC shall be measured and paid separately | 5 | Sqm | |
| 112 | 112 | M&L 12 mm thick plastering in CM 1:6 the other side of lathing finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge | 5 | Sqm | |
| 113 | 113 | M&L GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and directed by Engr-in-Charge | 5 | Sqm | |
| 114 | 114 | S&F bands, straps or stays , plain angle cleat or flat iron cleat or securing purlins to wood trusses or rafters, knee piece and similar small articles etc conforming to Fe-290 Gde E-165. | 20 | Kg | |
| 115 | 115 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins and similar works complete all as specified and directed by Engr-in-Charge | 0.2 | Cum | |
| 116 | 116 | M&L for reinforced cement concrete (nominal mix) 1:2 :4 type B1 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like complete all as specified and directed by Engr-in-Charge \nNote :- Reinforcement & formwork shall be measured and paid for separately. | 0.2 | Cum | |
| 117 | 117 | S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and directed by Engr-in-Charge. | 25 | Kg | |
| 118 | 118 | M&L Machine pressed precast concrete interlocking paver block any shape and size confering to IS 15658-2006 of 80mm thickness M-40 grade fixed with grey cement and pigment over sand cussion. | 30 | Sqm | |
| 119 | 119 | M & L for mild steel 8mm dia round bars cut to length, bent to shape required incl cranking, bending etc complete, binding with and incl mild steel wire not less than 0.9mm dia. | 60 | Kg | |
| 120 | 120 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed by Engr-in-Charge | 1 | Sqm | |
| 121 | 121 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar complete all as specified and directed by Engr-in-Charge | 0.3 | Ten Sqm | |
| 122 | 122 | M&L for Granite (of any type) work (table rubbed and polished) 16 to 18mm thick in flooring over & including 15mm thick screed bed (bedding layer) in CM 1:4, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including cutting and polishing (half mirror polish i.e. half granite polish as per local trade practice) complete all as specified and directed by Engr-in-Charge | 1 | Sqm | |
| 123 | 123 | M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge | 20 | Sqm | |
| 124 | 124 | M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge | 30 | Sqm | |
| 125 | 125 | M&L for preparation of new steel surfaces of any description, n exc 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer. | 1 | X Rm | |
| 126 | 126 | M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge | 15 | Sqm | |
| 127 | 127 | M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge | 35 | Sqm | |
| 128 | 128 | M/L for 3 mm thick Birla white putty/JK white wall care putty on walls complete all as specified and directed by Engr-in-Charge | 50 | Sqm | |
| 129 | 129 | M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of primer on walls complete all as specified and directed by Engr-in-Charge | 65 | Sqm | |
| 130 | 130 | M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper of approved shade/tint complete all as specified and directed by Engr-in-Charge | 50 | Sqm | |
| 131 | 131 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement base paint of approved shade on walls complete all as specified and directed by Engr-in-Charge | 50 | Sqm | |
| 132 | 132 | S&F in repairs aluminium drapery rod decorative, including brackets, decorative finials at both ends complete all as specified and directed by Engr-in-Charge | 10 | RM | |
| 133 | 133 | S&F Aluminium (die cast) body door closer hydrulically regulated, designation No 2, universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 134 | 134 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed by Engr-in-Charge | 10 | RM | |
| 135 | 135 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed by Engr-in-Charge | 5 | RM | |
| 136 | 136 | Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing complete all as specified and directed by Engr-in-Charge | 10 | RM | |
| 137 | 137 | M&L bands, straps , supports or stays for rainwater, ventilating pipes , including bolts ,if required , hooks (stay) , heavy , for large gates, hook and pintle hinges , large hasps and staples , chains , hand made sliding bolts , clamps , hold fasts , wall ties , hooks for hanging fans , plain angle cleat for securing purlins to wood trusses or rafters , knee piece inserts , two way and three way straps , plate washers and similar small articles . | 10 | Kg | |
| 138 | 138 | Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing complete all as specified and directed by Engr-in-Charge | 5 | RM | |
| 139 | 139 | M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed by Engr-in-Charge | 5 | RM | |
| 140 | 140 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore complete all as specified and directed by Engr-in-Charge\n | 30 | RM | |
| 141 | 141 | S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore complete all as specified and directed by Engr-in-Charge | 5 | RM | |
| 142 | 142 | M&L dismantling water tank of exc 250 ltr and not exc 500 ltr Capacity complete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 143 | 143 | S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 144 | 144 | Taking down AC/Salt glazed ware pipes and fittings upto 110mm complete all as specified and directed by Engr-in-Charge | 5 | RM | |
| 145 | 145 | S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof | 12 | Each | |
| 146 | 146 | S&F 75mm PVC(SWR) bends any radius with adess door. | 6 | Each | |
| 147 | 147 | S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and directed by Engr-in-Charge | 173 | RM | |
| 148 | 148 | S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and directed by Engr-in-Charge | 17 | RM | |
| 149 | 149 | S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-Charge | 5 | RM | |
| 150 | 150 | S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-Charge | 5 | RM | |
| 151 | 151 | S&F SWR bends 110 mm dia of any radius with access door complete all as specified and directed by Engr-in-Charge | 8 | Each | |
| 152 | 152 | S&F PVC (SWR) bends 75 mm dia of any radius with access door complete all as specified and directed by Engr-in-Charge | 2 | Each | |
| 153 | 153 | S&F PVC vent pipe 75mm dia | 1 | RM | |
| 154 | 154 | S&F PVC vent cowl 110 mm dia complete all as specified and directed by Engr-in-Charge | 2 | Each | |
| 155 | 155 | S&F PVC vent cowl 75 mm dia complete all as specified and directed by Engr-in-Charge | 9 | Each | |
| 156 | 156 | S&F PVC eaves gutters heavy duty half round 200 mm dia including necessary clamps end stopper pieces , down take pieces etc as required. | 20 | RM | |
| 157 | 157 | Supply pnly 32 mm waste coupling of PTMT (half or full threaded) | 2 | Each | |
| 158 | 158 | S&F Grating doom 100mm dia of PTMT (min wt -25gms) | 4 | Each | |
| 159 | 159 | S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20mm dia bore pipe. | 2 | Each | |
| 160 | 160 | S/F stainless steel grating doom 100 mm dia fixed in repairs complete all as specified and directed by Engr-in-Charge | 2 | Nos | |
| 161 | 161 | S & F 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/Sqcm fixed complete to walls, ceilings or in floor etc complete all as specified and directed by Engr-in-Charge | 3 | RM | |
| 162 | 162 | Supply only flush pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern. | 6 | Each | |
| 163 | 163 | S & F 110mm dia PVC (SWR) branch piece, single (single Y equal or unequal) complete all as specified and directed by Engr-in-Charge | 2 | Each | |
| 164 | 164 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge | 8 | Each | |
| 165 | 165 | S&F 150mm dia mild steel sheet eaves gutters of 1mm thick sheet, galvanised class 3, half round with rounded edges. | 25 | RM | |
| 166 | 166 | Supply and fixing 100 mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for nominal bore complete all as specified and directed by Engr-in-Charge. | 2 | Each | |
| 167 | 167 | S&F vitreous china half stall urinal flat back, size of 465 x 355 x 265mm (minimum) white, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia. | 2 | Each | |
| 168 | 168 | S&F Vitreous China squatting pan, `Orissa' pattern size 580 x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding compete. | 3 | Each | |
| 169 | 169 | Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed by Engr-in-Charge | 3 | Each | |
| 170 | 170 | S & F in repairs pillar tap of 15 mm dia , chromium plated fancy type , screwed for iron pipes complete all as specified and directed by Engr-in-Charge | 3 | Each | |
| 171 | 171 | S&F CP toilet paper holder as approved by GE complete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 172 | 172 | S&F 100mm cast iron sanitary connections socket to fit WC out let. | 3 | Each | |
| 173 | 173 | S&F towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (min wt - 170 gms) | 2 | Each | |
| 174 | 174 | S&F for CP health faucet with stand 1.5mtr flexible lead including two way brass CP angle stop cock 15mm dia complete all as specified and directed by Engr-in-Charge \nMake :Prayag or equivalent | 1 | Each | |
| 175 | 175 | S&F CP wall mixer (3 in 1) complete all as specified and directed by Engr-in-Charge\n(Make- Jaquar/Marc/Sona) | 3 | Each | |
| 176 | 176 | S&F CP Central hole basin mixer fancy type 15mm dia complete all as specified and directed by Engr-in-Charge\n(Make- Jaquar/Marc/Sona) | 1 | Each | |
| 177 | 177 | S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as specified and directed by Engr-in-Charge | 4 | Each | |
| 178 | 178 | S&F in repair PVC flushing cistern symphonic action type, 10 liters capacity, low level white with inlet ball valve, float and handle including bracket including PVC flush pipe, 32mm dia as fixed in repairs complete all as specified and directed by Engr-in-Charge\n(Make : Hindware (Sleek)/Commander (Slim)/Parryware) | 7 | Each | |
| 179 | 179 | S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge | 7 | Each | |
| 180 | 180 | S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated (concealed type long shank) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed complete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 181 | 181 | S&F in repairs for 15mm dia of pipe Angle valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed complete all as specified and directed by Engr-in-Charge | 11 | Each | |
| 182 | 182 | Supply and fixing 20 mm dia gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 183 | 183 | S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete all as specified and directed by Engr-in-Charge | 11 | Each | |
| 184 | 184 | S& F in repair swivel shower of CP any colour for fixing with 15 mm pipe (min weight 40 gms) incl shower arms 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (min weight 40 gms) complete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 185 | 185 | Supply and fixing of soap-dish chromium plated complete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 186 | 186 | S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws ccomplete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 187 | 187 | S/ F towel Ring of PTMT fixed with and including Chromium plated Brass Screws and wooden/ plastic cleats ( Minimum weight 90 gms) etc complete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 188 | 188 | M&L 600mm x 450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick AC plain building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. | 2 | Each | |
| 189 | 189 | S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 550 x 400mm including taking down old fixed complete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 190 | 190 | S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf with chromium plated brackets guard and railing complete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 191 | 191 | S&F PVC Shelves of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) complete all as specified and directed by Engr-in-Charge | 1 | Each | |
| 192 | 192 | S&F 0.71 mm thick plain aluminium sheeting , alloy 31000 H4 in ridges, hips , valley gutter , drip and straight flashing complete all as specified and directed by Engr-in-Charge | 1 | Sqm | |
| 193 | 193 | M&L for providing and injecting chemical emulsion for post constructional Anti-termite treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 ltr per linear meter including drilling and plugging holes etc in apron etc complete all as specified and directed by Engr-in-Charge | 20 | RM | |
| 194 | 194 | M&L for treating at points of contact of wood work with masonary / concrete by chemical emulsion (in oil or kerosene based solution) @ 0.50 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed by Engr-in-Charge | 30 | RM | |
| 195 | 195 | M&L for treating soil under existing floor at internal junctions with wall using chemical emulsion @ 1.00 ltr per hole , 300 mm apart including drilling and plugging 12 mm dia holes with CM 1:2 to match the existing floors complete all as specified and directed by Engr-in-Charge | 20 | RM | |
| 196 | 196 | S&F hindware bathtub Size 183 x 91.5 x 45 cm complete all as specified and directed by Engr-in-Charge\nModel : Strauss including all fittings and fixtures complete | 1 | Each | |
| 197 | 197 | S&F for depth 0.70m-1.65m DWCPE (SN8) 180 (OD)/163(ID) mm diameter pipes laidd on 150mm thick PCC 1:3:6 type C-2 incl packing under and haunching against the sides of pipes bed with excavation in any type of soil. RCC/ Precast RCC with SFRC ventilating cover and frame includes all all items and activities to execute and make sewer line funtional. | 10 | RM | |
| 198 | 198 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/buzzer, bell push, lamp holders, regulators, sockets, light fittingsetc. removing materials from site and making good to the disturbed surfaces of walls, ceiling floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and directed by Engr-in-Charge | 63 | Point | |
| 199 | 199 | Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connecting to earth dolly, including PVC rectangular box for mounting switches/ sockets/ regulators etc. with 3mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep complete all as specified and directed by Engr-in-Charge.\nMake: finolex/Havells/RR Kabel/Richa. \nMake of caping/casing & PVC boxes: Prestoplast/finolex/Supreme. | 1 | Each | |
| 200 | 199.01 | One light/fan/bell point controlled by one, one way switch complete all as specified and directed by Engr-in-Charge | 43 | Point | |
| 201 | 199.02 | One 3 pin socket outlet 5 Amp on the same board with other switches complete all as specified and directed by Engr-in-Charge | 5 | Point | |
| 202 | 199.03 | One 3 pin socket outlet 5 Amps on the independent board complete all as specified and directed by Engr-in-Charge | 9 | Point | |
| 203 | 200 | All as per item No.199.00 here-in-before but with 2.5 Sqmm for 3 pin 15 Amps switch socket point on independent board along with one run of 2.5 Sqmm copper conductor green in colour as earth continuity conductor connected to earth dolly complete all as specified and directed by Engr-in-Charge | 6 | Point | |
| 204 | 201 | M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and directed by Engr-in-Charge\nMake:- Plaza/SSK/Hager | 57 | Each | |
| 205 | 202 | M&L for Socket outlet 2 in 1, 3 pin, 5A flush type complete all as specified and directed by Engr-in-Charge\nMake:- Plaza/SSK/Hager | 14 | Each | |
| 206 | 203 | M&L for bell push switch 5 amp piano type flush type complete all as specified and directed by Engr-in-Charge. \nMake: Plaza/SSK/Hager | 2 | Each | |
| 207 | 204 | M&L for Switch Socket combination 2 in 1, 3 pin 5A/16A, 5 in 1 flush complete all as specified and directed by Engr-in-Charge\nMake:- Plaza/SSK/Hager/Anchor | 6 | Each | |
| 208 | 205 | M&L for stepped type electronic fan regulator 100 watt socket size flush type on the existing phenolic laminatied sheet etc complete all as specified and directed by Engr-in-Charge. \nMake: Plaza/SSK/Hanger | 5 | Each | |
| 209 | 206 | M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed by Engr-in-Charge\nMake:- Plaza/SSK/Hager | 20 | Each | |
| 210 | 207 | S&F copper sub main wiring and M&L for sub main wiring FRLSH with two runs of 4 sqmm and one run of 2.5 sqmm for earth wire with multi stranded copper conductors, 1100 volts grade drawn through and including PVC double locked casing and caping including complete all as specified and directed by Engr-in-Charge\nNote: two runs of 4 Sq mm + one run of 2.5 sq mm and one run of PVC casing and caping and its acessories of suitable size shall be measured as one unit length. \nMake: Havells/RR Kabel/Finolex/Richa.\nMake of casing /caping : Prestoplast/ finolex/ supreme | 40 | RM | |
| 211 | 208 | M&L for 20W LED, 4', Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting complete all as specified and directed by Engr-in-Charge\nMake : Havells Cat No LHFYBYPNIA1W022 Regal (batten) & LHDLEFXD5LR020(LED Tube) or equivalent in Bajaj/Philips | 10 | Each | |
| 212 | 209 | S&F 09 watt LED 2', wall mounted with polycarbonate housing/batten complete all as specified and directed by Engr-in-Charge \nMake : Havells Cat No LHEXBQP5IN1W009 or equivalent in | 2 | Each | |
| 213 | 210 | M&L in replacement for decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old unsv light fitting complete all as specified and directed by Engr-in-Charge. \nMake: Havells/Bajaj/Surya | 6 | Each | |
| 214 | 211 | M& L for 36 watt LED, 600x600mm recess mounte ceiling light fitting extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic drive etc. with all accessories internally pre wired complete all as specified and directed by Engr-in-Charge\nMake: CG cat No LCTLRN-36-FO-CDL or equivalent in Bajaj/Philips. | 8 | Each | |
| 215 | 212 | M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings complete all as specified and directed by Engr-in-Charge\nMake :- Plaza/SSK/Hager Make of Lamp :- Havells/Bajaj/Philips | 10 | Each | |
| 216 | 213 | M&L for LED 1x20W building Security light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose to the light fitting complete all as specified and directed by Engr-in-Charge\nMake:-Havells Cat Pt No LHETBXU7PA6S020 or equivalent in Bajaj/Philips | 2 | Each | |
| 217 | 214 | Taking down Exh/Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and directed by Engr-in-Charge | 9 | Each | |
| 218 | 215 | M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and directed by Engr-in-Charge | 9 | Each | |
| 219 | 216 | M&L for replacemnt of capacitor 2.5 Mfd incl making electrical connection complete all as specified and directed by Engr-in-Charge\nMake:- Epcos/L&T/BCH | 4 | Each | |
| 220 | 217 | M&L for replacemnt of steel ball bearing/bush of suitable size compatible to the existing ceiling fan complete all as specified and directed by Engr-in-Charge | 5 | Each | |
| 221 | 218 | M&L for copper rewinding for suitable size complete to the existing ceiling fan complete all as specified and directed by Engr-in-Charge | 5 | Each | |
| 222 | 219 | M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and directed by Engr-in-Charge | 5 | Each | |
| 223 | 220 | M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and directed by Engr-in-Charge\nMake:- Legrand Cat No 607711 or equivalent in ABB/Siemens | 1 | Each | |
| 224 | 221 | M&L for MCB SPN, 63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down complete all as specified and directed by Engr-in-Charge\nMake: Legrand Cat No 408636 or equivalent in ABB/Siemens. | 1 | Each | |
| 225 | 222 | M&L for MCB SP, 5 to 32 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' seriescomplete all as specified and directed by Engr-in-Charge\nMake:- Legrand Cat No 408587-95 or equivalent in ABB/Siemens | 6 | Each | |
| 226 | 223 | Taking down LT UG cable/service connection of any size and M&L for laying of LT UG cable , XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4 core complete all as specified and directed by Engr-in-Charge\nNOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. \nMake: Havells/Polycab/Phinolex | 50 | RM | |
| 227 | 224 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified and directed by Engr-in-Charge | 33.5 | Cum | |
| 228 | 225 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified and directed by Engr-in-Charge | 13.2 | Cum | |
| 229 | 226 | Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified and directed by Engr-in-Charge | 46 | Cum | |
| 230 | 227 | M&L for fine river washed sand in trenches complete all as specified and directed by Engr-in-Charge\nNOTE: For measurement purpose, punned down thickness shall only be taken. | 3.6 | Cum | |
| 231 | 228 | M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and directed by Engr-in-Charge | 391 | Each | |
| 232 | 229 | Supply and laying tubes light grade galvanised GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenchs/road crossing of size 40mm dia bore including taking out unsv GI tubing complete all as specified and directed by Engr-in-Charge\nMake: Jindal/Prakash surya/TATA | 6 | RM | |
| 233 | 230 | M&L for cutting /digging of existing hard surface of cement concret/butuminous road of size not less than 45 cm in width and 20 cm deep for laying of GI/CI pipe & makng good to the disturbed surfaces by providing PCC or same material after laying of pipe line and returning filling of sloil complete all as specified and directed by Engr-in-Charge | 10 | Per RM | |
| 234 | 231 | M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on complete all as specified and directed by Engr-in-Charge.\nNote:\n(i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 with 10mm thick CI cover plate hinged to angle iron frame of suitable size, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type. | 1 | Each Set | |
| 235 | 232 | M&L for LED post top lantern light fitting of 40 watt decorative type IP 65 glair free light fitting fixed with wall/gate complete all as specified and directed by Engr-in-Charge\nMake: CG Cat No LPTO-40-CDL or equivalent in Havells/Bajaj. | 2 | Each | |
| 236 | 233 | M&L for metal clad AC socket point Single pole and neutral enclosure with a two pin and earth plug and socket complet with one single pole MCB 20 Amps complete all as specified and directed by Engr-in-Charge\nMake Havells/HPL. | 2 | Each | |
| 237 | 234 | Supply, installation, testing and commissioning of water cooler fully stainless steel water cooled with UV less power consumption eco friendly refrigent 80 Ltr water storage faucets, electric driven single phase of capacity 40/80 ltr complete all as specified and directed by Engr-in-Charge\nMake : Usha or equivalent | 4 | Each | |
| 238 | 235 | Point wiring complete with 4 Sqmm for 3 pin 15 Amp socket point single core PVC insulated FRLS cable 1100 volt grade with multy stranded copper conductor drawn through and including PVC double locked casing and caping including provision of 4 Sqmm FRLS PVC insulated copper conductor cable as earth contunuity connected to common earth dolly, including PVC rectangular box for mounting switches/ sockets/ regulators etc complete all as specified and directed by Engr-in-Charge | 4 | Per Point | |
| 239 | 236 | M&L switch socket combination 5 in 1, 5A/16A, 5 in 1 flush type complete all as specified and directed by Engr-in-Charge | 4 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
