| 1 | 1 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering | | 220 | Sqm |
|---|
| 2 | 2 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour haing tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. | | 236 | Sqm |
|---|
| 3 | 3 | S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour haing tensile strength of 550 Mpa as in roof covering/cladding to wall/ridge, fixed with self tapping screws all as specified and directed. | | 8 | Sqm |
|---|
| 4 | 4 | Demolition of roofs, floors (other than ground floors), beams, staircases, landing, chajja and similar suspended work of reinforced cement concrete complete including removel of debris to a distance not exceeding 250m as directed by Engineer-in-Charge. | | 1 | Cum |
|---|
| 5 | 5 | M&L Precast Reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) In precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed | | 1 | Cum |
|---|
| 6 | 6 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality | | 283 | Kg |
|---|
| 7 | 7 | S&F Mild steel, plain black sheet 1.25mm thick in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs & funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets & fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required | | 3 | Sqm |
|---|
| 8 | 8 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 | | 145 | Kg |
|---|
| 9 | 9 | M&L for two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome | | 91 | Sqm |
|---|
| 10 | 10 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. | | 706 | Sqm |
|---|
| 11 | 11 | M&L Rendering 15mm thick on brick work or concrete surfaces in CM (1:4) finished even & smooth (without using extra cement) | | 296 | Sqm |
|---|
| 12 | 12 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth using extra cement all as specified. | | 98 | Sqm |
|---|
| 13 | 13 | M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) | | 335 | Sqm |
|---|
| 14 | 14 | M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) complete all as specified and directed. | | 87.5 | Sqm |
|---|
| 15 | 15 | M&L applying two coats of cement base paint, white or tinted on new wall surfaces incl preparation of surfaces complete all as specified and directed. | | 436.5 | Sqm |
|---|
| 16 | 16 | M&L for three coats of white wash on new wall surface including preparation of surface. | | 324 | Sqm |
|---|
| 17 | 17 | M&L for two coats of white wash on old wall surface including preparation of surface complete all as specified and directed. | | 60 | Sqm |
|---|
| 18 | 18 | Preparing of existing plastered or unplastered surfaces of walls incl complete removal of existing treatment complete and priming plastered & other surface with alkali-resistant priming paint complete all as specified and directed. | | 80 | Sqm |
|---|
| 19 | 19 | M & L preparation of new plastered surface and applying two OBD over two coats of wall care putty (wall care putty will be measured and paid seperately) | | 68 | Sqm |
|---|
| 20 | 20 | M & L preparation of new plastered surface and applying two coats of weather coat over a coat of chalk whiting over two coats of wall care putty (wall care putty will be measured and paid seperately) | | 50 | Sqm |
|---|
| 21 | 21 | M&L for one coat of white wash on old wall surface including preparation of surface. | | 20 | Sqm |
|---|
| 22 | 22 | M&L preparation old plaster surfaces and applying one coat of white wash on ceiling complete all as specified and directed. | | 32 | Sqm |
|---|
| 23 | 23 | M&L preperation of old plastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed. | | 32 | Sqm |
|---|
| 24 | 24 | M & L for complete removal of existing treatment and applying two coats of OBD over a coat of chalk whiting over two coats of wall care putty (wall care putty will be measured and paid seperately) | | 100 | Sqm |
|---|
| 25 | 25 | M&L 2mm thick approved wall care putty on wall surfaces all as directed | | 330 | Sqm |
|---|
| 26 | 26 | M & L for complete removal of existing treatment and applying two coats of weather coat over a coat of chalk whiting over wall care putty (wall care putty will be measured and paid seperately) all as directed. | | 200 | Sqm |
|---|
| 27 | 27 | M&L preparation of old wall surface and applying one coat of OBD complete all as specified and directed. | | 30 | Sqm |
|---|
| 28 | 28 | Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises. | | 36 | Sqm |
|---|
| 29 | 29 | M&L Virified Ceramic tiles (light shades) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. | | 24 | Sqm |
|---|
| 30 | 30 | All as per item 29 here in before but in skirting | | 1.5 | Sqm |
|---|
| 31 | 31 | S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed. | | 21 | Sqm |
|---|
| 32 | 32 | All as per item 31 here in before above but on vertical surfaces such as skerting, dados and risers, steps etc. all as directed. | | 2.5 | Sqm |
|---|
| 33 | 33 | M&L 15mm thick screed bed for laying floor finishes in CM (1:6) all as directed. | | 61 | Sqm |
|---|
| 34 | 34 | M&L 10mm thick screed for laying floor finishes in CM (1:4) on vertical surfaces for fixing of wall tiles all as directed. | | 28 | Sqm |
|---|
| 35 | 35 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as directed. | | 16 | Sqm |
|---|
| 36 | 36 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over plaster & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as directed. | | 12 | Sqm |
|---|
| 37 | 37 | Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) all as directed. | | 60 | Cum |
|---|
| 38 | 38 | M&L 100mm thick PCC type B-2, (1:2:4) using 40mm graded stone aggregate as in floors including necessary form work all as specified and directed. | | 255 | Sqm |
|---|
| 39 | 39 | Forming 12mm thick expansion joints filled with pre-formed bituminous filler & top 30mm primed & sealed with sealing compound, Grade `B' Thickness of concrete slab 100 mm all as specified and directed. | | 12 | X Rm |
|---|
| 40 | 40 | Forming 12mm thick Expansion joints filled with pre-formed bituminous filler & top 30mm primed & sealed with sealing compound, Grade `A' Thickness of concrete slab 150 mm all as specified and directed. | | 32 | X Rm |
|---|
| 41 | 41 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil all as specified and directed. | | 48.5 | Cum |
|---|
| 42 | 42 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate all as specified and directed. | | 6.5 | Cum |
|---|
| 43 | 43 | Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) all as specified and directed. | | 32 | Cum |
|---|
| 44 | 44 | M&L Brick work with subclass \"B' bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) all as specified and directed. | | 2.5 | Sqm |
|---|
| 45 | 45 | Maroom/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering all as specified and directed. | | 35 | Cum |
|---|
| 46 | 46 | Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface all as specified and directed. | | 22.5 | Cum |
|---|
| 47 | 47 | M&L 150mm thick PCC type D-2 (1:4:8) using 40mm graded stone aggregate as in sub base complete all as specified and direceted. | | 91 | Sqm |
|---|
| 48 | 48 | S&F glazing with 4mm thick acrylic sheet fixed with frame in squaes incl frame complete all as specified and directed. | | 2 | Sqm |
|---|
| 49 | 49 | M&L PCC type (1:3:6) type C-2 using 40mm graded stone aggregate 75mm thick plinth protection laid in pannels and finished even and smooth withhout using extra cement incl formwork complete all as specified and directed. Note:- Joints 12mm wide to be full depth of PCC shall be provided at every three meter and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rates for concrete in the plinth protection. | | 39 | Sqm |
|---|
| 50 | 50 | Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) all as specified and directed. | | 6 | Each |
|---|
| 51 | 51 | Taking down Chowkats or frames n exc 1.5 sqm all as specified and directed. | | 12 | Each |
|---|
| 52 | 52 | Supplied and fixed Pressed steel frames of size 165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. all as specified and directed. | | 15 | RM |
|---|
| 53 | 53 | All as per 52 here in before but of size 105 x 60mm | | 5 | Rm |
|---|
| 54 | 54 | M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, 1:3:6 type C 1 using 20 mm graded aggregate including form work and fair finishing the concreate surfaces all as specified and directed | | 0.2 | Cum |
|---|
| 55 | 55 | S&F 35mm thick flush door shutters, solid core construction, with block board core and plywood, commercial type on both sides complete all as specified and directed. | | 5 | Sqm |
|---|
| 56 | 56 | S & F 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23 (a). | | 2.5 | Sqm |
|---|
| 57 | 57 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples | | 4.5 | Sqm |
|---|
| 58 | 58 | M&L for preparation of new wooden surfaceover 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. | | 19 | Sqm |
|---|
| 59 | 59 | S&F aluminium anodised, barrel tower bolt of extruded section 200mm long | | 4 | Each |
|---|
| 60 | 60 | S&F aluminium anodised sliding door bolts with hasp and staple (boilt type) 12mm dia bolt 300mm long | | 7 | Each |
|---|
| 61 | 61 | S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. | | 25 | Kg |
|---|
| 62 | 62 | S&F powder coated Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified | | 15 | Sqm |
|---|
| 63 | 63 | M&L for two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome all as specified and directed. | | 4 | Sqm |
|---|
| 64 | 64 | M&L for one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface all as directed | | 65 | Sqm |
|---|
| 65 | 65 | S&F glazing with 4mm thiick acrylic sheet fixed with frame in squaes incl all fixing arrangement complete all as specified and directed. | | 12 | Sqm |
|---|
| 66 | 66 | M&L incl taking down carefully old decayed and loose reinforced concrete and applying a coat of bonding agent as per manufacturers instructions complete all as directed. | | 15 | Sqm |
|---|
| 67 | 67 | Providing & laying of Emaco S88 CT or equivalent fibre reinforced pre - packed Polymer Modified cementitious Mortar on the sound substrate and making the surface is original shape. Cure it for 3 days all as specified and directed. | | 15 | Sqm |
|---|
| 68 | 68 | Demolition of PCC of any description & in any position not otherwise specifically provided for (unreinforced) including removal of debris to a distance not exceeding 250m all as specified and directed. | | 5.6 | Cum |
|---|
| 69 | 69 | M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even & smooth (without using extra lime or cement) all as specified and directed. | | 12 | Sqm |
|---|
| 70 | 70 | M&L PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate as in padding concrete complete all as specified and directed. | | 0.6 | Cum |
|---|
| 71 | 71 | M&L APP modified polymeric membrane with minaral finish on top min 3mm thick and weighing n less than 3.5kg/sqm with minaral reinforced with polyster non woven fabric ( wt n less than 150gm/sqm) laid over cold bitumenous primer by torch application mathod with min overlap of 75mm on longitudanal direction and 100mm in the transverse direction complete. | | 12 | Sqm |
|---|
| 72 | 72 | Taking down AC/PVC pipe any class 100mm bore (including all fittings) including disconnecting pipes and fittings complete. | | 20 | Rm |
|---|
| 73 | 73 | M&L for 150mm dia UPVC pipe (Sch-40) as in down take pipe fixed to wall with all fittings complete all as specified and directed. | | 20 | Rm |
|---|
| 74 | 74 | S&F 150mm dia UPVC bend all as directed. | | 2 | Each |
|---|
| 75 | 75 | Demolition Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets | | 40 | Sqm |
|---|
| 76 | 76 | Material & Labour for suspended false ceiling system using Chicago metallic (E grid) exposed suspended system of gird, section size 600 mm x 600 mm comprisisng of GI powder coated main 39 mm x 24 mm x 0.80 mm thick (thickness comprising of GI / 0.40 + PPPCGS / 0.30) Cross Tee 29 mm x 24 mm x 0.80mm thick and wall angle 22.2 mm x 22.2 mm x 0.65 mm thick with and including 4 mm thick HPSC (High pressure steam cured) pre-primed self imposed textured designer board to be placed in the grid system duly suspended with 4 mm dia GI bar hangers fixed with steel dash fasterners from purlins of the roof with clips including provn for light fixture complete all as specified and directed. | | 46 | Sqm |
|---|
| 77 | 77 | Dismantling wrought iron or mild steel work of any description not otherwise provided for | | 0.5 | Per Quintal |
|---|
| 78 | 78 | S&F Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp & staple & one shop coat of primer; erected in position as indicated, complete; push pull or manual type Thickness of laths 1.25 mm all as specified and directed. | | 10 | Sqm |
|---|
| 79 | 79 | M & L 75 mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in plinth protection even and smooth without using extra cement all as specified and directed. | | 93 | sqm |
|---|
| 80 | 80 | M&L chequered cement concrete pre polished tiles machine pressed 30cmx30cmx20-25mm thick jointed and pointed in neat cement slurry with grey cement and pigment over 15mm thick screed bed in CM 1:6 all as specified and directed. | | 93 | Sqm |
|---|
| 81 | 81 | M&L Precast cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate Set in CM(1:4) louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame all as specified and directed. | | 100 | Sqm |
|---|
| 82 | 82 | Removing excavated soil exc. 50m but n exc 100m & depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed. | | 5.7 | Cum |
|---|
| 83 | 83 | M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete all as specified and directed. | | 0.5 | Cum |
|---|
| 84 | 84 | M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Columns, pillars, piers, posts and struts all as specified and directed. | | 0.8 | Cum |
|---|
| 85 | 85 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil. | | 5.2 | Cum |
|---|
| 86 | 86 | M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality all as specified and directed. | | 45 | Kg |
|---|
| 87 | 87 | Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintel hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165 all as specified and directed. | | 150 | Kg |
|---|
| 88 | 88 | M&L 100mm thick PCC type C-2, (1:3:6) using 20mm graded stone aggregate as in pavings all as specified and directed. | | 900 | Sqm |
|---|
| 89 | 89 | M&L 150mm thick PCC type B-2, (1:2:4) using 20mm graded stone aggregate complete all as specified and directed, including necessary form work if any completed all as specified and directed. | | 900 | Sqm |
|---|
| 90 | 90 | Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' | | 28 | X Rm |
|---|
| 91 | 91 | Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft loose soil | | 36 | Sqm |
|---|
| 92 | 92 | M&L 75mm thick PCC type D2(1:4:8) using 40mm graded stone aggregate as in sub base all as specified and directed | | 8 | Sqm |
|---|
| 93 | 93 | M&L 40mm thick PCC type B1(1:2:4) using 20mm graded stone agg finished even and smooth without using extra cement complete all as specified and directed | | 2 | Sqm |
|---|
| 94 | 94 | M&L coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cment slurry or colour cement to match all as specified and directed | | 12 | Sqm |
|---|
| 95 | 95 | M&L for RCC type B-1 (1:2:4) using 20mm graded stone agg as beam, lintles over 1.5 m span and the like includes necessary complete all as specified and directed | | 0.1 | Cum |
|---|
| 96 | 96 | M&L Pre-cast PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole cover slab set in CM 1:4 complete all as specified. | | 0.15 | cum |
|---|
| 97 | 97 | S&F 15mm bore galvanished water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors. | | 6 | RM |
|---|
| 98 | 98 | S&F 20mm bore galvanished water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors. | | 15 | RM |
|---|
| 99 | 99 | S&F Bib taps 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type all as specified and directed. | | 2 | Each |
|---|
| 100 | 100 | S&F Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe | | 1 | Each |
|---|
| 101 | 101 | S&F PVC connections 15mm size with PTMT nuts of length 450mm | | 2 | Each |
|---|
| 102 | 102 | S&F Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste chain & plug & porcelain stopper but including brackets | | 1 | Each |
|---|
| 103 | 103 | S&F Stop valves 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions | | 4 | Each |
|---|
| 104 | 104 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood & fixed to wooden plugs with CP brass screws & cup washers | | 1 | Each |
|---|
| 105 | 105 | S&F in Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) | | 1 | Each |
|---|
| 106 | 106 | S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern | | 2 | Each |
|---|
| 107 | 107 | S&F in PVC valveless syphonic action type low level flushing cistern of 10 Ltrs capacity with inlet, ball valve, float, flush pipe amd handle including bracket etc complete all as specified and as directed | | 1 | Each |
|---|
| 108 | 108 | S&F brass cromium plated tubular towel rail 20 mm dia,D type , 600mm long between flanches including brackets | | 1 | Each |
|---|
| 109 | 109 | Cutting into existing manholes for 100mm dia and connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required | | 1 | Each |
|---|
| 110 | 110 | S&F in repairs PVC (SWR) pipes 110mm bore with rubber ring joints fixed to walls (or) in floors. | | 9 | RM |
|---|
| 111 | 111 | S&F (SWR) junction Sinbgle T with access door complete all as specified and directed | | 1 | Each |
|---|
| 112 | 112 | S&F in repairs PVC (SWR) pipes 75mm bore with rubber ring joints fixed to walls (or) in floors all as specified and directed | | 3 | RM |
|---|
| 113 | 113 | S&F 100 mm dia cromium plated grating | | 1 | Each |
|---|
| 114 | 114 | S&F 75mm dia PVC (SWR) floor trap with grating including jointing with solvent cement and fixed | | 1 | Each |
|---|
| 115 | 115 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet reinforced with M.S Square tube, in opening as per specification & drawing | | 4.7 | Rm |
|---|
| 116 | 116 | S&F 100mm Butt hinges extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed type B-21 | | 6 | Each |
|---|
| 117 | 117 | S&F Aluminium anodised, barrel tower bolts of extruded section 150mm long complete all as specified and directed | | 2 | Each |
|---|
| 118 | 118 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & Single Side Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of Single Side Prelam PVC sheet to be fitted in the M.S frame welded/ sealed to the stile & rails having one side feathered edge & on other side 10mm 90degree bent edge with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing. | | 1.3 | Sqm |
|---|
| 119 | 119 | M&L steel work in tubular truss including special shaped washers etc, complete using ERW or induction butt welded tubes conformign to IS 1161-1979 grade SI - 240. | | 169 | Kg |
|---|
| 120 | 120 | M&L PCC type B1 (1:2:4) using 20mm graded stone agg as in hold fast etc complete including necessary formwork if any & fair finishing the concrete surface all as specified and directed | | 0.2 | cum |
|---|
| 121 | 121 | S&F steel ventilators fixed type with glazing bars complete all as specified | | 0.3 | SQM |
|---|
| 122 | 122 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity incl Dismantling the existing including water tanks & removing to store all as specified and directed | | 1 | Each |
|---|
| 123 | 123 | S&F in Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 20mm-210 gms) all as specified and directed | | 1 | Each |
|---|
| 124 | 124 | S&F gun metal 20mm globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed | | 1 | Each |
|---|
| 125 | 125 | M&L PCC in coping , and the like including weathering, slightly rounded for chamfered angles and throating type B0(1:2:4) using 12.5mm graded aggregate all as specified and directed | | 0.1 | cum |
|---|
| 126 | 126 | M&L 25mm thick PCC type B1(1:2:4) using 20mm graded stone agg finished even and smooth without using extra cement complete all as specified and directed | | 6 | SQM |
|---|
| 127 | 127 | M&L for RCC type B-1 (1:2:4) using 20mm graded stone agg as in slabs supported on walls, beams and deck slabs and in shelves and the like complete all as specified and directed | | 0.11 | cum |
|---|
| 128 | 128 | M&L for form work to soffits of suspended slab such as floor slab, roof slab, landing and similar work n.exc 200mm thick all as specified and directed | | 1.45 | SQM |
|---|
| 129 | 129 | M&L 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jams, pillars , window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed | | 1.68 | SQM |
|---|
| 130 | 130 | S&F sink made of stainless steel without drain board 1mm thick kitchen with plugs, washers & waste cupling inlcuidng bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm complete | | 1 | Each |
|---|
| 131 | 131 | M&L for 2nd class hard wood plain fillets rectangular or triangular in section not exc 25 Sqcm , clean sawn, secured with nails or brads all as specified and directed | | 18 | RM |
|---|
| 132 | 132 | S&F 2nd class hard wood Boarding 15cm thick fixed with as in shelves, partions and shelves of built in cupboards, almirahs, book shelves etc all as specified and directed | | 3 | Sqm |
|---|
| 133 | 133 | M&L for preparation of particle board 19/20mm thick interior grade prelaminated on both sides with decorative choice lamination & complete all as specified and directed | | 4.8 | SQM |
|---|
| 134 | 134 | Taking down and Refixing of Aluminium window with shutter in other place n.t exc 1.5 Sqm each complete all as directed | | 1 | Each |
|---|
| 135 | 135 | M&L 2nd class hard wood Plain solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints , supplied all as specified and directed | | 0.03 | cum |
|---|
| 136 | 136 | M&L 30mm Thick Flush shutter , solid core construction , with block board core and plywood face panel , commercial type of both sides complete all as specified and directed | | 1.4 | SQM |
|---|
| 137 | 137 | S&F continous piano hinges, mild steel, bright finish or electrogalvanised with width of flaps (when open ) 30mm complete all as directed | | 10 | RM |
|---|
| 138 | 138 | S&F Aluminium anodised, barrel tower bolts of extruded section 75mm long complete all as specified and directed | | 6 | Each |
|---|
| 139 | 139 | S&F aluminium handles, cast type anodised 150mm long complete all as specified and directed | | 2 | Each |
|---|
| 140 | 140 | S&F aluminium handles, cast type anodised 100mm long complete all as specified and directed | | 6 | Each |
|---|
| 141 | 141 | Cutting holes in brick wall not exc half bricks built in cement mortar including making good dismantled portion in PCC 1:2:4 type B1 as required complete all as specified and directed | | 3 | Each |
|---|
| 142 | 142 | E/M Portion Taking down carefully point wiring of any type and in any size on wooden batten/ PVC conduit including acessories such as switchs, soket ceiling rose, regulators, holders and FTL fittings including making good to disturbed surfaces, matching with existing complete all as directed. | | 36 | Each |
|---|
| 143 | 143 | Taking down submain wiring any type and in any size including making good to disturbed surfaces, matching with existing complete all as specified and as directed. | | 30 | RM |
|---|
| 144 | 144 | Taking down switchfuses, DB's including MCB's any type and any capacity complete all as directed. | | 1 | Each |
|---|
| 145 | 145 | Material and labour for point wiring (concealed) in and including rigid non metallic PVC conduit, medium grade, ISI marked, 19/20 mm dia, with 1.5 sqmm FRLS PVC insulated and unsheathed, stranded copper conductor cable, single core, 1100 volts grade with cast iron pressed steel terminal boxes suitable for mounting Modular switches, sockets with Modular Cover plate including FRLS PVC insulated and unsheathed stranded copper condutor of 1.5 sqmm as continuous earth wire for one light / fan / bell point controlled by one switch and matching with the existing surface complete all as directed. (a) One light / fan point controlled by one switch\n | | 22 | Per Point |
|---|
| 146 | 145.1 | (b) One light controlled by two way switch | | 2 | Per point |
|---|
| 147 | 145.2 | (c) One 5 Amp socket point on same board | | 6 | Per Point |
|---|
| 148 | 146 | All as per item No 4 above but with 2.5 sq mm multistrand copper conductor cable for one 15 Amps Switch/socket controlled by one switch on independent board and 2.5 sq mm PVC insulated multistrand copper conductor cable as continuous earth wire complete all as specified and directed. | | 6 | Per Point |
|---|
| 149 | 147 | Material and labour in for sub main wiring with two single core 4 sqmm multi stranded copper conductor, FRLS, PVC insulated, unsheathed cable, ISI marked, in and including 20 mm dia PVC conduit including 4 sqmm FRLS, PVC insulated and unsheathed stranded copper conductor as earth wire in surface/ recess complete all as specified and directed.\nNote:- Two runs of 4 sqmm copper conductor cable, one run of 4 sqmm copper conductor as earth continuity conductor and one run of PVC conduit will be measured as one unit.\n\n | | 30 | RM |
|---|
| 150 | 148 | Supply and fix Modular switches Single way 10 A,240 Volts with ISI Marked. | | 30 | Each |
|---|
| 151 | 149 | Supply and Fix Modular socket 10 A, 6 pin,240 Volts with ISI Marked. | | 6 | Each |
|---|
| 152 | 150 | Supply and fix Modular switches Single way 16 A,240 Volts with ISI Marked. | | 6 | Each |
|---|
| 153 | 151 | Supply and Fix Modular socket 16 A, 6 pin,240 Volts with ISI Marked. | | 6 | Each |
|---|
| 154 | 152 | S & F Ceiling rose two to three terminal PVC/polycarbonate, isolated body. | | 22 | Each |
|---|
| 155 | 153 | Supply and fix sheet metal enclosures, SPN, two pin and earth plug socket with one MCB, SP, 32 amps complete all as specified and directed. | | 1 | Each |
|---|
| 156 | 154 | S&F Modular stepped type electronic fan Regulator flush type, on the existing phenolic laminated etc as reqd single pole 240 volts grade upto 350 watts heavy duty ISI marked. | | 4 | Each |
|---|
| 157 | 155 | S&F single pole and neutral 8 Way double door Sheet metal enclosures factory made DBs protection class IP-42, suitable for fixing of MCBs conforming to IS-13032, Isolators etc with 200 Amp rated bus bar 240V powder coated painted all as specified. | | 1 | EACH |
|---|
| 158 | 156 | Supply and fix MCB SPN, 6 to 32 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc complete all as directed. | | 1 | EACH |
|---|
| 159 | 157 | Supply and fix MCB SP, 6 to 32 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc., complete all as directed.\nMake for ser item No 18 to 20 :- Legrand/ Havells/ Schneider/ Siemens/ L&T. | | 6 | Each |
|---|
| 160 | 158 | Taking down existing Ceilling Fan / Exhaust Fan of any size and and cleaning oiling gresing and refixing its orignal position and replacing of check nut & bolt, quarter pin etc. complete all as specified and directed. | | 4 | Each |
|---|
| 161 | 159 | Supply and fix 9 watt LED lamp with angle/batten holder all as per required and directed | | 6 | Each |
|---|
| 162 | 160 | Supply and fix surface mounted LED fitting for uniform light distribution of 12W and proper connection from fitting to exihisting point and making the surface smooth all as per required and directed by engg in charge.Make-CG Cat Part NO LCDSPL-S-12CDL or equivalent in Philips/ C&S | | 2 | Each |
|---|
| 163 | 161 | Supply and fix high efficiency suspended mounted 36 watt LED luminaire light fitting, with 120 lumen/watt output, opal diffuser with all connected accessories, prewired with 3 core flexible wire of size 1.5 sqmm, Size 595 x595 mm connecting and testing complete all as directed. | | 12 | Each |
|---|
| 164 | 162 | M & L for dry river washed and screened dry sand for filling in trenches below and around the cable for cushioning including punning down as specified in relevant clause of SSR Part I.\nNote:- Punned thickness shall only be measured and paid. | | 1 | Cum |
|---|
| 165 | 163 | S&F for protection of UG cable with 1 layer of new bricks laid flat butting to each other casing old size sub class 'B' bricks complete all as specified and directed. | | 210 | Each |
|---|
| 166 | 164 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core all as directed. | | 80 | RM |
|---|
| 167 | 165 | Earthing complete for various equipments with galvanised steel earth plate electrode 600 x 600x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to Galvanised earth lead wire 4 mm dia by means of bolts, nuts, chuck nuts and washers of galvanised iron or steel, GI pipe 40mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber shall be given 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No.3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on completion all as directed.\nNote:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate. | | 1 | Each Job |
|---|
| 168 | 166 | Labour only for lateral boring under road/ drain/ PCC path by manually/machine for inserting the 40 mm dia light grade GI pipe for cable protection complete all as specified and directed. | | 6 | RM |
|---|
| 169 | 167 | S & F light grade galvanised iron tube 40 mm bore with all fittings and fixed to walls / ceiling or laid in floor, pole or laid in trenches and road crossings including in ground and with fixed with walls / poles complete all as specified and as directed. | | 6 | RM |
|---|
