| 1 | 1 | Surface dressing of the ground including removing vegitation and in equalities not exceeding 15cm deep and disposal of rubbish lead up to 50 meter and lift up to 1.5 meter. | item1 | 90 | Sqm |
|---|
| 2 | 2 | Earth work excavation in foundation trenches or drains not exceeding 1.5m in width or 10 sq.m on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. | item2 | 68 | Cum |
|---|
| 3 | 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering lead up to 50 mtr and lift up to 1.5 metres | item3 | 27 | Cum |
|---|
| 4 | 4 | Providing and laying cement concrete 1:4:8 (1 cement 4 M- sand 8 granite chips ) for foundation and plinth | item4 | 15 | Cum |
|---|
| 5 | 5 | Providing and laying cement concrete 1:5:10 (1 cement 5 M-sand 10 granite chips ) foundation and plinth | item5 | 5 | Cum |
|---|
| 6 | 6 | Reinforced cement concrete work 1:1.5:3 (1 cement 1.5 M- sand 3 granite chipps 20mm nominal size excluding cost of centring,shuttering and reinforcement . a) foundation footing base of coloum etc and mass concrete | item6 | 31 | Cum |
|---|
| 7 | 7 | Reinforced cement concrete work ( wall any thickness) including attached pillasters, buttress, plinth and string course, fillets columns, pillars, peirs, abutments, post and struts etc... up to floor five level excluding cost of centring,shuttering and reinforcement . 1:1.5:3 (1 cement 1.5 M- sand 3 granite chipps 20mm nominal size | item7 | 13 | Cum |
|---|
| 8 | 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, shelves chajjas, lintel, bands, plain window sills, staircase and spiral staircase .. up to floor five level excluding cost of centring,shuttering and reinforcement . 1:1.5:3 (1 cement 1.5 M-sand 3 granite chipps 20mm nominal size | item8 | 57 | Cum |
|---|
| 9 | 9 | Cold twisted steel reinforcement for R.C.C work including bending, binding and placing in position complete. | item9 | 10880 | Kg |
|---|
| 10 | 10 | Centering and shuttering including strutting propping etc and removal of form work a) foundation footing base of coloum etc and mass concrete | item10 | 140 | Sqm |
|---|
| 11 | 11 | Centering and shuttering including strutting propping etc and removal of form work a) Suspended floors. Roofs,landings, balconies and access platform | item11 | 261 | Sqm |
|---|
| 12 | 12 | Centering and shuttering including strutting propping etc and removal of form work a) Lintel , beams , plinth beams,girder, bressummers and cantilivers | item12 | 200 | Sqm |
|---|
| 13 | 13 | Centering and shuttering including strutting propping etc and removal of form work a) Column, piller,piers, abutments, posts and struts. | item13 | 172 | Sqm |
|---|
| 14 | 14 | Centering and shuttering including strutting propping etc and removal of form work a) Stairs, (excluding landings) except spiral-staircases. | item14 | 29 | Sqm |
|---|
| 15 | 15 | Brick work with modular brick of class designation in foundation and plinth in cement mortar ( 1 cement 6 M-sand) | item15 | 9 | Cum |
|---|
| 16 | 16 | Brick work with modular brick of class designation in super structre above plinth lele in cement mortar ( 1 cement 6 M-sand) | item16 | 67 | Cum |
|---|
| 17 | 17 | Half bric work in super structre above plinth level upto floor leve in cement motar (1:4 1cement 4 M. Sand) | item17 | 29.43 | Sqm |
|---|
| 18 | 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed position I class Karimaruth or equivalent. | item18 | 1.36 | Cum |
|---|
| 19 | 19 | Providing and fixing 35mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. First class karimaruth or equiva;lent. | item19 | 51 | Sqm |
|---|
| 20 | 20 | Providing and fixing karimaruth wood or equivalent 25mm square wooden bars at required spacing in wooden frames of windows and clerestory windows | item20 | 260 | Mtr |
|---|
| 21 | 21 | Providing 40x5 mm iron hold fast 40cm long including fixing to frames with 10 mm dia bolts, nuts, wooden plugs and embedding in cement concrete block of size 30x10x15 cm of mix 1:3:6 ( 1 cement, 3 M-sand 6 graded stone aggregate of 20mm nominal size) | item21 | 178 | Each |
|---|
| 22 | 22 | Providing and fixing Bright finished brass casement stay with necessary fittings and screws .200mm weighning not less than 240gms | item22 | 44 | Each |
|---|
| 23 | 23 | Providing and fixing brass tower bolt (barral type) with necessary screws etc complete. a) 100 mm x 10mm | item23 | 76 | Each |
|---|
| 24 | 23.1 | b) 250 mm x 10mm | item24 | 26 | Each |
|---|
| 25 | 24 | Providing and fixing brass door latch with necessary screws etc complete. a) 250 mm x 16mmx5mm | item25 | 13 | Each |
|---|
| 26 | 25 | Providing and fixing brass handle with necessary screws etc complete. a) 125 mm | item26 | 26 | Each |
|---|
| 27 | 25.1 | b) 100mm | item27 | 38 | Each |
|---|
| 28 | 26 | Providing and fixing Bright finished brass door stoper with rubber cusion & necessary screws . | item28 | 8 | Each |
|---|
| 29 | 27 | providing and fixing Ninkel plated M.S. Pipe curtain rods with nickel plated brackets 20 dia | item29 | 16 | Mtr |
|---|
| 30 | 28 | Providing and fixing stainless steel ( Grade304) railing made of Hollow tubes,channels,plates etc...including welding grinding,buffing,polishing and making curvature( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steelbolts etc... of required size,on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts,fasteners etc..) | item30 | 568 | Kg |
|---|
| 31 | 29 | Providing and laying vitrified floor tiles (premium quality ) in diffren sizes ( thickness to be specified by the manufacture ) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all coulers and shades, laid 20mm thick cement mortar 1:4 ( 1 cement 4 M- sand ) including grouting the joints with white cement and matching pigments etc.. complete. ( flooring) Size of Tile 800x800 mm (khajaria polished vitrified tiles or equivalent) | item31 | 160 | Sqm |
|---|
| 32 | 30 | Providing and laying Vitrified tiles in different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3(1cement, 3 M-sand), including grouting the joints with white cement and matching pigments etc.complete. Johnson/Khajaria/Bell or equivalent. Size of Tile 800x800 mm(khajaria polished vitrified tiles or equivalent) | item32 | 29 | Sqm |
|---|
| 33 | 31 | Providing and fixing ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacture ) of first quality confirming to IS:15622 of approved make,in colours such as White , ivory, Grey,Fume red brown,laid on 20 mm thick cement mortar 1:4 ( 1cement, 4 metal sand ) and joining with white cement and matching pigment etc... complete. | item33 | 14 | Sqm |
|---|
| 34 | 32 | Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS:15622 ( thickness to be specified by the manufacture ) of approved make,in all colours,shades except burgundy ,bottle green,black of any size as approved by engineer-in-charge in skirting,risers of steps and dado over 12mm thick cement mortar 1:3 ( 1cement, 3 M sand ) and joining with grey cement slurry @3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. | item34 | 64 | Sqm |
|---|
| 35 | 33 | Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. | item35 | 84 | Mtr |
|---|
| 36 | 34 | 6mm thick cement plaster to ceiling in cement mortar 1:3 (1ement,3 P.Sand) | item36 | 362 | Sqm |
|---|
| 37 | 35 | 12mm thick cement plaster in CM. 1:6 (1CEMENT,6P.Sand)outside | item37 | 532 | Sqm |
|---|
| 38 | 36 | 15mm thick cement plaster In CM 1:6 (1Cement,6P.samd)on the rough side of single or half brick wall inside | item38 | 477 | Sqm |
|---|
| 39 | 37 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer(Berger/Asian/Nerolac) | item39 | 1371 | Sqm |
|---|
| 40 | 38 | Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. | item40 | 1371 | Sqm |
|---|
| 41 | 39 | Finishing with Deluxe Multi surface paint system for interiors andexteriors using primer as per manufactures specifications two ormore coats applied with Teflon coated Royal coated) on walls @1.25ltr/10 sqm) over including priming coat of special primer applied @ 0.75 ltr/10 sqm. (Asian Paint or equivalent | item41 | 900 | Sqm |
|---|
| 42 | 40 | Wall painting with acrylic emulsion paint, having VOC(Volatile Organic Compound ) content less than 50 grams/litre, of approved brand and manufacture, including applying\nadditional coats wherever required, to achieve even shade andcolour.Two coat | item42 | 343 | Sqm |
|---|
| 43 | 41 | Painting wood work with Delux Multi Surface paint to give an even shade. Two or more coats applied on @ 0.90ltr/10sqm) over under coat of primer applied @ 0.75 ltr/10 sqm of approved and manufacture (Berger or Equivalent) | item43 | 106 | Sqm |
|---|
| 44 | 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) a) 20 mm nominal bore | item44 | 20 | Mtr |
|---|
| 45 | 42.1 | (b) 32 mm nominal bore | item45 | 50 | Mtr |
|---|
| 46 | 43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work). a) 20 mm nominal bore | item46 | 5 | Mtr |
|---|
| 47 | 43.1 | (b)32 mm nominal bore | item47 | 170 | Mtr |
|---|
| 48 | 44 | Providing and fixing CP brass bibcock of approved quality and manufacture complete. a) 20 mm nominal bore | item48 | 12 | Each |
|---|
| 49 | 45 | Providing and fixing CP brass stopcock of approved quality and manufacture complete. a) 20 mm nominal bore | item49 | 6 | Each |
|---|
| 50 | 46 | Providing and fixing health faucet of approved qulity and manufacture complete(Cer/Hindware/Parry ware) | item50 | 3 | Each |
|---|
| 51 | 47 | providing and fixing GM Full way wheel valve of approved quality 25mm nominal bore | item51 | 6 | Each |
|---|
| 52 | 48 | Providing and placing sintex tank on terrace ( at floor level ) polythene water storage tank ISI : 12701 marked,with coverand suitable locking arrangement and making necessary holes\nfor inlet ,outlet and over flow pipe but without fittings and the\nbase support for tank | item52 | 3 | Each |
|---|
| 53 | 49 | Providing and fixing nominal guage PVC Pipe of approvedquality compleate with special flang compression type fittingsincluding trenching and re filling etc. External work 110 mm nominal bore(prince/Supreme/Finolex) | item53 | 30 | Mtr |
|---|
| 54 | 50 | Providing and fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required. | item54 | 3 | Each |
|---|
| 55 | 51 | Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. white vitrous china flat back wash basin 550x400mm with one 15mm C.P brass piller tap | item55 | 6 | Each |
|---|
| 56 | 52 | Providing anf fixing Stailess steel A ISI 304 ( 18/8) kitchen sink asper IS 13983 with CI brackets stainless steel plug 40 mm ,including painting of fittings and brackets, cutting and making good the walls where required. A) Kitchen sink with out drain board 450x400x 250 mm | item56 | 3 | Each |
|---|
| 57 | 53 | Providing anf fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers. | item57 | 6 | Each |
|---|
| 58 | 54 | Providing and fixing towel rail brackets fixed to wooden cleat with scerws and washers . (a) 600 x 20 mm CP brass towel rail with brackets .600mm long towel rail brackets with total length of 645mm width 78mm and effective height of 88 mm weighinig not less than 190 gms. | item58 | 6 | Each |
|---|
| 59 | 55 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fittingarrangements weighing not less than 106 gms. | item59 | 6 | Each |
|---|
| 60 | 56 | Providing and fixing 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ± 0.1 mm wall thickness. The lock ail made up of’H’ section, a UPVC hollow section of size 100x24 mm and 2 mm ± r 0.2 mm wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). | item60 | 10 | Sqm |
|---|
| 61 | 57 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. | item61 | 30 | Mtr |
|---|
| 62 | 58 | Providing,laying and P.V.C pipes grade \"A\" with stiff mixture of 1:3 (1 cemenr 3 metal sand) including testing of joints etc.complete a) 110mm diametre Metre | item62 | 20 | Mtr |
|---|
| 63 | 58.1 | b) 90mm diametre Metre | item63 | 20 | Mtr |
|---|
| 64 | 59 | Providing anf fixing on wall face PVC. soil waste and vent pipe a) 100mm dia pipes | item64 | 15 | Mtr |
|---|
