Public Works Department-PWD has published Annual Repair And Maintenance Of Govt Residential Non Residential Building During The Year 2019 20 S . H Replacement Of Old Gci Sheets And Anti Termite Treatment Of Wooden And Interior Works At Town Hall Under The Jurisdiction Of Central Ii Subdivision ,. Submission Date for this Tender is 02-03-2020. Building Repair Tenders in Agartala Tripura. Bidders can get complete Tender details and download the document.
| Name of Work: A/R & M/O Govt residential / non-residential building during the year 2019-20 / S.H: Replacement of old GCI Sheets & anti termite treatment of wooden & interior works at Town Hall under the jurisdiction of Central-II Sub-Division, PWD under Agartala Division No.I, PWD(R&B), Agartala. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supplying chemical emulsion in sealed containers including\ndelivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20% | Item 1 | 851 | Ltr |
| 2 | 2 | Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. | Item 2 | 234.7 | mtr |
| 3 | 3 | Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. | Item 3 | 1484.24 | Sqm |
| 4 | 4 | Providing flat iron brackets 50x3mm size with necessary bolts, nuts and washers etc. for fixing G.S. sheets gutters with purlins. Wind Tie - Main Building | Item 4 | 140.4 | mtr |
| 5 | 5 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63mm thick with zinc coating not less than 275gm/m2 | Item 5 | 545.8 | Sqm |
| 6 | 6 | Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers including a coat of approved steel primer and two coats of approved paint complete. 0.63mm thick with zinc coating not less than 275gm/m2 | Item 6 | 71 | mtr |
| 7 | 7 | 12 mm thick one side prelaminated (with particle board decorative lamination on other sides) and balancing lamination grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per\nIS : 848 and prelamination conforming to IS : 12823 Grade - 1, Type II marked | Item 7 | 3.76 | Sqm |
| 8 | 8 | Providing and fixing aluminium work for doors,\nwindows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) For fixed portion of approved quality Anodised aluminium (anodised transparent or dyed to\nrequired shade according to IS: 1868, Minimum anodic\ncoating of grade AC 15) | Item 8 | 96 | Kg |
| 9 | 9 | Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge | Item 9 | 695.8 | Sqm |
| 10 | 10 | Charges for fixing corrugated G.S. Sheet roofing fixed with polymer coated J or L hooks 8 mm diameter, bolts and nuts 6 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with lead and including a coat of approved steel primer and two coats of approved epoxy paint on overlapping of sheets complete ( upto a pitch of 60 degrees ) over a built structure including all types of necessary scaffoldings etc. but excluding the cost of the C.G.S. sheets, purlins, rafters and trusses etc.as per clauses of Chapter - 12 of CPWD specification. 0.63 mm thick with zinc coating not less than 275 gm / m2 | Item 10 | 150 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
