}

Construction Of Amusement Park And Recreation Facility Under Tourism Development Programme At Amalnala Project Phase Ii , Tah Rajura , Dist . Chandrapur, Chandrapur-Maharashtra

Water Resources Department-WRD has published Construction Of Amusement Park And Recreation Facility Under Tourism Development Programme At Amalnala Project Phase Ii , Tah Rajura , Dist . Chandrapur. Submission Date for this Tender is 20-02-2020. Building Work Tenders in Chandrapur Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

23521844
Construction Of Amusement Park And Recreation Facility Under Tourism Development Programme At Amalnala Project Phase Ii , Tah Rajura , Dist . Chandrapur
Open Tender
Indian
Maharashtra
Chandrapur
20-02-2020

Tender Details

Construction Of Amusement Park And Recreation Facility Under Tourism Development Programme At Amalnala Project Phase Ii , Tah Rajura , Dist . Chandrapur

Key Value

Document Fees
INR 2240 /-
EMD
INR 150000.0 /-
Tender Value
INR 2.37 Crore /-

BOQ Items

Name of Work :Construction Of Amusement Park And Recreation Facility Under Tourism Development Programme @ Amalnala Project Phase II, Tah Rajura, Dist. Chandrapur
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Item No.1- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. 470.01 Cum
2 2 Item No.2-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 72.44 Cum
3 3 Item No.3-Providing and laying in situ, cement concrete in M15 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete, 221.51 Cum
4 4 Item No.4-Providing and casting in situ cement concrete in M20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Foundations, Columns, Beams, Slabs, Pardi of required thickness including centering, formwork, cover blocks compacting , curing ,finishing & roughening etc complete 101 Cum
5 5 Item No.5-Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. 347.83 Cum
6 6 Item No.6-Providing internal cement plaster 12mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete 974.33 Sqm
7 7 Item No.7-Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed sand etc copleted 5880 Sqm
8 8 Item No.8-Providing and filling in the foundation with Contractors Material of approved quality including watering, compacting etc. complete. (To be executed with prior approval of Superintending Engineer) 38.92 Cum
9 9 Item No.9-Providing and fixing in position TMT steel reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as reuired completed. 10.12 MT
10 10 Item No.10-Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. 21.89 MT
11 11 Item No.11-Providing and applying 2 Coats of 100% Pure acrylic low VOC water based paint with to withstand for period of atleast 5 years Jotun Easycoat Plus Silk or equivalent make. Paint should provide durable long lasting silk finish with high resistance to UV and resistance to spreading of flame. Paint should protect against concrete carbonation with R value of minimum 600 and ability to built cracks upto min 0.7mm. The paint has to be applied on High quality water based acrylic copolymer primer with good alkali resistance properties. with all leads and lifts at all levels etc. complete, as directed by Engineer in charge. 705.6 Sqm
12 12 Item No.12-Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.. 579.96 Sqm
13 13 Item No.13-Providing and laying vitrified stone effect finish tiles of approved make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness in Flooring and confirming to IS. 156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. 1287.88 Sqm
14 14 Item No.14-Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick for partition with roundings / moulding the edges etc. complete. 86.4 Sqm
15 15 Item No.15-Providing and fixing of colour coated zinc aluminium ® AZ 150 min 150 gm / Sq Mt total on each side) profilled sheet for roofing etc complete. 756 Sqm
16 16 Item No.16-Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete 168 Rmt
17 17 Item No.17-Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete 77.9 Sqm
18 18 Item No.18-PREPARING LAWN (30cm Depth):- Excavating the ground to a required depth of 30 cm removing & conveying unwanted stuff to arequired distance as directed filling fresh garden soil / silt and manure in excavated area 3:1 proportion to a height of 30 cm. Mixin 4165 Sqm
19 19 Item No.19-PREPARING EDGING OR BORDER:- Excavating the ground to a required depth of 20 cm in the requried area, removing & Converying unwanted stuff, rubbish to the required distance as directed. Filling the excaated part with fresh soil and manure in 3:1 proportion to a required height to 20 cm.Mixing levelling, watering the same planting ready plants of edging / Border at distance of 20 Cm apart by watering weeding, stirring of soil replacing casualties, pruning if necessary etc complete. 1950 Sqm
20 20 Item No.20-PREPARING CANNA BED :- Excavating the ground to a required depth of 30 cm removing & conveying unwanted stuff to arequired distance as directed filling fresh garden soil / silt and manure in excavated area 2:1 proportion to a height of 30 cm. Mixing garden soil and manure throught, well, levelling, watering on previous night. Planting well developed Canna rhyzomes 40 cms apart.maintaining till well establish by watering, weeding, cliping rolling etc complete. 1800 Sqm
21 21 Item No.21-PREPARING FLOWER BED :- Excavating the ground to a required depth of 30 cm removing & conveying unwanted stuff to arequired distance as directed filling fresh garden soil / silt and manure in excavated area 3:1 proportion to a height of 30 cm. Mixing garden soil and manure throught, well, levelling, watering on previous night. Planting Seedlings of required annuals 25 cms, apart.maintaining till well establish by watering, weeding, cliping rolling etc complete. 1146 Sqm
22 22 Item No.22-ROSE PLANT :- Excavating Pit with 0.3 x 0.3 x 0.30 removing & conveying unwanted stuff to arequired distance as directed filling fresh garden soil / silt and manure in excavated area 3:1 proportion to a height of 0.3 m. Mixing garden soil and manure throught, well, levelling, watering on previous night. Planting 40 to 50 cms heighthealthy plant of required rose variety.Maintaining till well establish by watering, weeding, cliping rolling etc complete. 450 Nos
23 23 Item No.23-MOGRA PLANT / CREEPERS / CLIMBRS :- Excavating Pit with 0.3 x 0.3 x 0.30 removing & conveying unwanted stuff to arequired distance as directed filling fresh garden soil / silt and manure in excavated area 3:1 proportion to a height of 0.3 m. Mixing garde 390 Nos
24 24 Item No.24-PLANTING LARGE FLOWERING / SHADY TRESS :- (Minimum Height to 1 Mtr) Digging Pit with 0.9 x 0.9 x 0.90 removing & conveying unwanted stuff to arequired distance as directed filling fresh garden soil / silt and manure in excavated area 3:1 proportion etc complete. 100 Nos
25 25 Item No.25-PLANTING SMALL AND MEDIUM SIZE ORNAMENTAL / FLOWERING PLANT:- Digging Pit with 0.6 x 0.6 x 0.60 removing & conveying unwanted stuff to a required distance as directed filling fresh garden soil and farm yard manure upto a height of 0.60 m with fresh gard 500 Nos
26 26 Item No.26-Providing and fixing 24 guage PLAIN ALLUMINIUM SHEET on the face of door shutter including cutting to required size and fixing by screws including makin good the damages if any to exsisting door shutter and frame etc complete as directed etc complete. 93.8 Sqm
27 27 Item No.27-Supplying and erecting M.S. pipe pole ‘B’ grade 80 mm dia 3.60 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP 94 Nos
28 28 Item No.28-Supplying & erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 150 x 100 x 100 mm complete on pole as per specification no. CB-SB 94 Nos
29 29 Item No.29-Supplying and erecting mains with ISI mark WP 4 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I binding wire. 1410 mtr
30 30 Item No.30-Supplying & erecting triple pole and neutral distribution board (TPNDB)with door surface/ flush mounted SPMCB of12 ways, on iron / G.I. frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB 2 each
31 31 Item No.31-Supplying and laying (including excavation of suitable width &\ndepth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete 40 mtr
32 32 Item No.32-Supplying & erecting integral post top lantern fixtures (mushroom type) suitable for LED lamp upto 12 W consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. FGODF/ PTL 94 each
33 33 Item No.33 Supplying & erecting 10-12W, 230V integral type LED Lamp\nsuitable for B-22/E-27 base. 94 each
34 34 Item No.34-Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SWSWR/MCB 7 each
35 35 Item No.35-Supplying & erecting mains with 2x6 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 45 mtr
36 36 Item No.36-Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mmdia. G.l. Rod complete with all materials as per specification no. EAEP 10 each
37 37 Item No.37-Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW 677 mtr
38 38 Item No.38-Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 900 mtr
39 39 Item No.39-Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 900 mtr
40 40 Item No.40-Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 500 mtr
41 41 Item No.41-Supplying & erecting mains with 2x6 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 210 mtr
42 42 Item No.42-Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 440 mtr
43 43 Item No.43-Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 1800 mtr
44 44 Item No.44-Supplying & laying Rigid PVC conduit 25 mm Dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC, para no. 1.2.1 900 mtr
45 45 Item No.45-Point wiring for light/fan/bell in 20 mm rigid PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wire,modular type switch, earthing and required accessaries as per specification No: WG-PW/SW 48 point
46 46 Item No.46-Supplying and erecting modulartype electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete.Note: Add Rs 60/- provision of additional two modules for box and double plate 8 each
47 47 Item No.47-Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner 28 each
48 48 Item No.48-Concealing provided M.S./ PVC switch box in wall with finishing in an approved manner as per specification No: WG-PW/CW 60 each
49 49 Item No.49-Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete 8 each
50 50 Item No.50-Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete 4 each
51 51 Item No.51-Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete 12 each
52 52 Item No.52-Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. 4 each
53 53 Item No.53-Supplying and erecting modulartype electronic step\nregulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete.Note: Add Rs 60/- provision of additional two modules for box and double plate 12 each
54 54 Item No.54-Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WGMA/CC, para no. 1.2.1 100 each
55 55 Item No.55-Concealing of provided ISI mark G.I. pipe/H.G. screwed conduit/PVC pipe in wall/floor/false ceiling complete as per specification No:WG-PW/CW 200 each
56 56 Item No.56-Supplying and Erecting regular/ standard model Ceiling fan of 1200 mm. sweep complete erected in position as per specifcation no. FG-FN/CF 8 each
57 57 Item No.57-Supplying and erecting single pole and neutral distribution board (SPNDB) with doorsurface/flush mounted with 2 ways for incoming and 10 ways for outgoing SP MCB’s on iron/ G.I. frame/wooden board as per specification No. SWSWR/MCBDB 4 each
58 58 Item No.58-Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W. 28 each
59 59 Item No.59-Supplying and erecting double pole metal /iron clad switch with H.C. type fuse and neutral link 240V, 32Aon iron / G.I. frame/board as per specification No. SW-SWR/MDP 4 each
60 60 Item No.60-Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SWSWR/MCB 8 each
61 61 Item No.61-Supplying, erecting & marking SPMCB 6A to 32A, C- series (for Power) in provided distribution board as per specification No. SWSWR/MCB 8 each
62 62 Item No.62-Supplying erecting and marking double pole isolator only switch version of miniature circuit breaker (Conforming to IS:8828 of1996) of 40A with required wiring connections and lugs etc. in provided distribution board. 4 each
63 63 Item No.63-Supplying and erecting CRCA /die-cast aluminium powder coated housing LED Panel light (slim edge-lit) square / round shape suitable for 13 to 15 W with provision for plane front frame with translucent cover fixed to the housing complete 36 each
64 64 Item No.64-Supplying and erecting ‘B’ grade G.I.pipe/M.S. pipe down rod dulypainted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. 8 each
65 65 Item No.65-Supplying & fixing Anchor type fastener Fan hook, with 2 Nos of 10mm dia x 75 mm long with necessary materials for Ceiling Fan. 8 each
66 66 Item No.66-Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. complete with all materials, testing & recording the results as per specification\nNo. EA-EP 4 each
67 67 Item No.67-Supplying & erecting triple pole and neutral distribution board (TPNDB)with door surface/ flush mounted SPMCB of12 ways, on iron / G.I. frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB 4 each
68 68 Item No.68-Supplying and erectingLED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete per specification No . FG-ODF/FLS2 30 each
69 69 Item No.69-Supplying and erecting street light Wall bracket made from mm.dia ‘B’class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB 24 each
70 70 Item No.70-Supplying and erecting square / rectangular shaped CRCA /die-cast aluminium powder coated housing LED Panel (slim edge-lit) light suitable for 25 to 32Wwith provision for plane front frame with translucent cover fixed to the housing complete 8 each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail