Purchase Of Electrical Maintenance Work, Biet Jhansi-Uttar Pradesh

TDR : 23498015

Tender Notice
BOQ

Expired

Biet Jhansi , Uttar Pradesh

Tender Brief : Purchase Of Electrical Maintenance Work

Document Fees
₹ 1180 /-

EMD
₹ 60000.0 /-

Tender Value
₹ 30 Lakhs /-

Submission Date
24-02-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Work for Electrical Maintenance
1	1.1	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. the armouring cable shall be properly connected with the earth conductor by clamps etc.\n(a) 25 sq. mm 3-1/2 core. PS No. 501 (j)\n	item1	100	RM
2	1.2	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. the armouring cable shall be properly connected with the earth conductor by clamps etc.\n(b)35 sq. mm 3-1/2 core. PS No. 501 (k)	item2	50	RM
3	1.3	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. the armouring cable shall be properly connected with the earth conductor by clamps etc.\n(c)50 sq. mm 3-1/2 core. PS No. 501 (l)	item3	90	RM
4	1.4	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. the armouring cable shall be properly connected with the earth conductor by clamps etc.\n(d)95 sq. mm 3-1/2 core. PS No. 501 (n)	item4	50	RM
5	1.5	Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. the armouring cable shall be properly connected with the earth conductor by clamps etc.\n(e)400 sq. mm 3-1/2 core. PS No. 501 (t)	item5	300	RM
6	2.1	Supply and fixing of brass nickel plated compression gland for PVC insulted & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-incharge.\n(a) 25 sq. mm 3-1/2 core. PS No. 503 (j)\n	item6	4	No.
7	2.2	Supply and fixing of brass nickel plated compression gland for PVC insulted & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-incharge.\n(b) 35 sq. mm 3-1/2 core. PS No. 503 (K)\n	item7	2	No.
8	2.3	Supply and fixing of brass nickel plated compression gland for PVC insulted & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-incharge.\n(c) 50 sq. mm 3-1/2 core. PS No. 503 (l)\n	item8	2	No.
9	2.4	Supply and fixing of brass nickel plated compression gland for PVC insulted & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-incharge.\n(d) 95 sq. mm 3-1/2 core. PS No. 503 (n)\n	item9	2	No.
10	2.5	Supply and fixing of brass nickel plated compression gland for PVC insulted & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-incharge.\n(e) 35 sq. mm 3-1/2 core. PS No. 503 (t)	item10	2	No.
11	3.1	Supply & fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.\n(a) 25 sq. mm. PS No. 504 (e)\n	item11	16	No.
12	3.2	Supply & fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.\n(b) 35 sq. mm. PS No. 504 (f)	item12	8	No.
13	3.3	Supply & fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.\n( c) 50 sq. mm. PS No. 504 (g)\n	item13	8	No.
14	3.4	Supply & fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.\n(e) 95 sq. mm 3-1/2 core. PS No. 504 (i)	item14	8	No.
15	3.5	Supply & fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.\n( e) 400 sq. mm. PS No. 504 (0)\n	item15	8	No.
16	4.1	Supply & wiring of submain FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. Heavy duty ( 2mm thick) PVC conduct with one number FR PVC insulted 1100 V grade multistrand copper conductor cable as earth continuity wire drawn insid the conduct.\n( a) Submain with two number 1.5 mm² copper cable & 1.5 mm² Cpper cable as earth PS No. 1311 ( C)	item16	1370	RM
17	4.2	Supply & wiring of submain FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. Heavy duty ( 2mm thick) PVC conduct with one number FR PVC insulted 1100 V grade multistrand copper conductor cable as earth continuity wire drawn insid the conduct.\n( b) Submain with two number 2.5 mm² copper cable & 1.5 mm² Cpper cable as earth PS No. 1301 ( C)	item17	30	RM
18	4.3	Supply & wiring of submain FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. Heavy duty ( 2mm thick) PVC conduct with one number FR PVC insulted 1100 V grade multistrand copper conductor cable as earth continuity wire drawn insid the conduct.\n( c) Submain with two number 4.0 mm² copper cable & 2.5 mm² Cpper cable as earth PS No. 211 ( C)	item18	629	RM
19	4.4	Supply & wiring of submain FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. Heavy duty ( 2mm thick) PVC conduct with one number FR PVC insulted 1100 V grade multistrand copper conductor cable as earth continuity wire drawn insid the conduct.\n( d) Submain with two number 6.0 mm² copper cable & 4.0 mm² Cpper cable as earth PS No. 212 ( C)	item19	320	RM
20	4.5	Supply & wiring of submain FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. Heavy duty ( 2mm thick) PVC conduct with one number FR PVC insulted 1100 V grade multistrand copper conductor cable as earth continuity wire drawn insid the conduct.\n( e) Submain with two number 10 mm² copper cable & 6.0 mm² Cpper cable as earth PS No. 213 ( C)	item20	30	RM
21	5	Supply & burring of Safe Earthing Electrode T-39, (Hot Dip Galvanized), length up to 3000mm, outer Dia 76mm inner Dia 38mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with hot Dip Galvanized up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 20 X 3 G.I. strip, upto switch board along with 30cm square C.I. frame with hinged cover & masonry housing. PS No. 725 (B)	item21	8	No.
22	6.1	S&F surface/flush mounting SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.\n( a) 4 way PS No. 1022 (A) CAT-B	item22	11	No.
23	6.2	S&F surface/flush mounting SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.\n( b) 8 way PS No. 1024 (A) CAT-B	item23	4	No.
24	6.3	S&F surface/flush mounting SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.\n( c)12 way PS No. 1025 (A) CAT-B	item24	11	No.
25	7.1	Supply & fixing of MCB SP 240/415 V (10 KA) PS No. 1002 (A) Havells/SSK/Indocop CAT-B as given\n( a) 6 Amp PS No. 1002 (A)	item25	90	No.
26	7.2	Supply & fixing of MCB SP 240/415 V (10 KA) PS No. 1002 (A) Havells/SSK/Indocop CAT-B as given\n( b) 10 Amp PS No. 1002 (A)	item26	10	No.
27	7.3	Supply & fixing of MCB SP 240/415 V (10 KA) PS No. 1002 (A) Havells/SSK/Indocop CAT-B as given\n( c) 16 Amp PS No. 1002 (A)	item27	10	No.
28	7.4	Supply & fixing of MCB SP 240/415 V (10 KA) PS No. 1002 (A) Havells/SSK/Indocop CAT-B as given\n( d) 20 Amp PS No. 1002 (A)	item28	10	No.
29	7.5	Supply & fixing of MCB SP 240/415 V (10 KA) PS No. 1002 (A) Havells/SSK/Indocop CAT-B as given\n( e) 25 Amp PS No. 1002 (A)	item29	10	No.
30	8.1	( a) Supply & fixing of Isolater 40 Amp DP 240/415 V (10 KA) PS No. 1005 (A) Havells/SSK/Indocop CAT-B	item30	30	No.
31	8.2	( b) Supply & fixing of Isolate 63 Amp DP 240/415 V (10 KA) PS No. 1005 (B) Havells/SSK/Indocop CAT-B	item31	10	No.
32	9.1	S&F of 32 Amp 240 V DP metal clad rewireable type switch fuse unit on M.D.F.E.G/Teak wood board complete in all respect. PS No. 305 Havells/SSK/Indocop CAT-B	item32	2	No.
33	9.2	S&F of 63 Amp 415 V heavy duty double break HRC fuse type metal clad TPN complete with HRC fuse etc. complete in all respect. PS No. 345 Havells/SSK/Indocop CAT-A	item33	2	No.
34	9.3	S&F of 100 Amp 415 V heavy duty double break HRC fuse type metal clad TPN complete with HRC fuse etc. complete in all respect. PS No. 346 Havells/SSK/Indocop CAT-A	item34	3	No.
35	10	Supply & Fixing of recess/surface /pendent mounting round 12-15 watt LED down lighter having coated die cast aluminnium housing with heat shrink, diffuser/reflector & driver set complete in all respect. PS. No. 1401	item35	30	No.
36	11	Supply & fixing of cable root marker in suitable masonary enclosure as directed by engineer incharge. PS. No. 505	item36	10	No.
37	12	Supply & erracetion of Incoming 630 Amp. MCCB-1 No. & Outgoing 100 Amp. MCCB-5 Nos. & 63 Amp. MCCB-2 Nos. factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. channel base with bottom and top cable entries electrical control panel with TPN MCCB's (four pole 36 KA with thermal magnatic release) switches complete and instrument chamber etc. complete in all respects. the instrument chamber shall be separate and shall compromise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA,P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. the panel board shal have suitable capacity electrolytic aluminium busbars as per IS8623 or above insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable sice covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. \nThe job includes the grounting of the board as per directions of engineer-incharge. All out goings of 100 Amp and above shall have an ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cat. A panel cubicle type switch board shall be of cat B only. PS No. 814 (A)	item37	1	No.
38	13	Supply & wiring of submains with two nos. of 2.5 sq. mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer incharge. PS No.289	item38	200	RM
39	14	Supply & wiring of submains with two nos. of 4 sq. mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer incharge. PS No.289 (A)	item39	100	RM
40	15	Wiring point for Light with 1.5 sq mm FR PVC insulated multistrand single core copper conductor cable (drawn through existing concealed steel conduit ) and 5 Amp. Flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screw and cup washers mounted over existing MS switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in chage. PS No. 174 (b)	item40	200	Nos
41	16	Wiring point for fant with 1.5 sq mm FR PVC insulated multistrand single core copper conductor cable (drawn through existing concealed steel conduit ) and 5 Amp. Flush type switch & fixed with 3mm thick phenolic laminated backalite sheet with brass machine screw and cup washers mounted over existing MS switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in chage. PS No. 177 (b)	item41	200	Nos
42	17	Wiring point for plug point with 1.5 sq mm FR PVC insulated multistrand single core copper conductor cable (drawn through existing concealed steel conduit ) and 5 Amp. Flush type switch & 3 pin socket and earth continuity wire of 1.5 sq mm PVC insulated muktistrand copper conductor cable. fixed with 3mm thick phenolic laminated backalite sheet with brass machine screw and cup washers mounted over existing MS switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in chage. PS No. 178 (b)	item42	200	Nos
43	18.1	Electrical Fire Extinguisher\nSupply of ABC type fire extinguisher 06 kg with (ISI) mark	item43	21	Nos
44	18.2	Electrical Fire Extinguisher\nSupply of ABC type fire extinguisher 09 kg with (ISI) mark	item44	26	Nos
45	19.1	Electrical Fire Extinguisher\nABC type Fire extinguisher 05 kg filling	item45	54	Nos
46	19.2	Electrical Fire Extinguisher\nABC type Fire extinguisher 10 kg filling	item46	3	Nos
47	19.3	DCP type Fire extinguisher 05 kg filling	item47	25	Nos
48	19.4	Electrical Fire Extinguisher\nDCP type Fire extinguisher 10 kg filling	item48	30	Nos
49	19.5	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( a) Incoming 800 AMP TP ACB CAT-A	item49	2	No.
50	20.2	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( b) Coupler 800 AMP TP ACB CAT-A	item50	1	No.
51	20.3	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( c) Outgoing 630 Amp TPN switch disconnector fuse unit CAT-A	item51	2	No.
52	20.4	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( d) Outgoing 250 Amp TPN switch disconnector fuse unit CAT-A	item52	4	No
53	20.5	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( e) Outgoing replacement 100 Amp TPN MCCB CAT-A	item53	2	No.
54	20.6	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( f) Outgoing 63 Amp TPN MCCB CAT-A	item54	1	No.
55	20.7	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( g) Outgoing 32 Amp TPN MCCB CAT-A	item55	1	No.
56	20.8	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( h) Busbar 800 Amp CAT-A	item56	2	No.
57	20.9	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( i) Busbar 250 Amp CAT-A	item57	2	No.
58	21.1	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( j)4 pole Change over 800 Amp CAT-A	item58	2	No.
59	21.2	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( k) Replacement of CT	item59	6	No.
60	21.3	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( l) Replacement of Ammeter	item60	2	No.
61	21.4	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( m) Replacement of Voltmeter	item61	2	No.
62	21.5	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( n) Replacement of Indicator lamp	item62	6	No.
63	21.6	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( o) Wiring copper wire	item63	1	Job
64	21.7	Repairing, maintenance, overhaulling service, testing & energizing of L&T make TP ACB panel as given\n( p) HRC fuse 250 Amp replacement	item64	6	No.
65	22	Repairing maintenance, overhaulling service, testing & energizing of 500 KVA transformer\n( a) Transportation loading, unloading & testing of 500 KVA 11/.4 KV transformer	item65	1	No.
66	22.1	Repairing maintenance, overhaulling service, testing & energizing of 500 KVA transformer\n( b) Repairing & Rewinding of 500 KVA 11/0.43kv transformer (with replacement of tap changer, LT bush road, HT bush road & labour charges)	item66	1	No.
67	22.2	Repairing maintenance, overhaulling service, testing & energizing of 500 KVA transformer\n( c) Supply of New transformer Oil	item67	500	Lit
68	22.3	Repairing maintenance, overhaulling service, testing & energizing of 500 KVA transformer\n( d) Spray painting	item68	1	Job
69	22.4	supply, replacement & erracetion of 200 Amp (four pole 36 KA with thermal magnetic release) MCCB L&T cat -A	item69	2	Nos.
70	23	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( a) Wet service	item70	60	Nos.
71	23.1	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( b) Running Capacitor	item71	20	Nos.
72	23.2	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( c) Starting Capacitor	item72	20	Nos.
73	23.3	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( d) Gas refil	item73	30	Nos.
74	23.4	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( e) Fan motor rewinding	item74	15	Nos.
75	23.5	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( f) Gas pipe welding	item75	15	Nos.
76	23.6	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( g) Duct	item76	10	Nos.
77	23.7	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( h) Filter grill	item77	8	Nos.
78	23.8	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( i) Compressor window AC	item78	2	Nos.
79	23.9	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( j) Compressor split AC	item79	2	Nos.
80	24	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( k) Relay	item80	10	Nos.
81	24.1	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( l) Connector	item81	10	Nos.
82	24.2	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( m) Wiring kit	item82	10	Nos.
83	24.3	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( n) Thermostat	item83	10	Nos.
84	24.4	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( o) Chill tray	item84	5	Nos.
85	24.5	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( p) Service charge split	item85	60	Nos.
86	24.6	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( q) PCB display	item86	10	Nos.
87	24.7	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( r) Drain pipe	item87	5	Nos.
88	24.8	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( s) Stabilizer repairing transformer	item88	5	Nos.
89	24.9	Electrical Maintenance Work (NON SCHEDULE Work)\nAC repairing\n( t) Stabilizer repairing PCB	item89	5	Nos.
90	25	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( a) Water tank repair 120 L	item90	1	Nos.
91	25.1	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( b) Water tank repair 150 L	item91	1	Nos.
92	25.2	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( c) Float valve	item92	5	Nos.
93	25.3	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( d) Filter + capillary	item93	2	Nos.
94	25.4	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( e)Gas filling charge	item94	3	Nos.
95	25.5	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( f) Compressor 775 W	item95	1	Nos.
96	26	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( g) Compressor 1550 W	item96	1	Nos.
97	26.1	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( h) Body repair	item97	2	Nos.
98	26.2	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( i) Making new base	item98	2	Nos.
99	26.3	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( j) Relay	item99	3	Nos.
100	26.4	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( k) Starting capacitor	item100	5	Nos.
101	26.5	Electrical Maintenance Work (NON SCHEDULE Work)Water cooler repairing\n( l) Running capacitor	item101	5	Nos.
102	26.6	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( m) Fan motor rewinding & repairing	item102	2	Nos.
103	26.7	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( n) Loading & unloading	item103	2	Nos.
104	26.8	Electrical Maintenance Work (NON SCHEDULE Work)\nWater cooler repairing\n( o) Service charge	item104	5	Nos.
105	26.9	Electrical Maintenance Work (NON SCHEDULE Work)\nSubmersible pump Repairing\n( a) 1 Hp single phase motor rewinding & pump repairing	item105	2	Nos.
106	27	Electrical Maintenance Work (NON SCHEDULE Work)\nSubmersible pump Repairing\n( b) 2 Hp single phase motor rewinding & pump repairing	item106	2	Nos.
107	27.1	Electrical Maintenance Work (NON SCHEDULE Work)\nSubmersible pump Repairing\n( c) 3 Hp single phase motor rewinding & pump repairing	item107	1	Nos.
108	27.2	Electrical Maintenance Work (NON SCHEDULE Work)\nSubmersible pump Repairing\n( d) 1 Hp starter repairing	item108	1	Nos.
109	27.3	Electrical Maintenance Work (NON SCHEDULE Work)\nSubmersible pump Repairing\n( e) 2 Hp starter repairing	item109	1	Nos.
110	27.4	Electrical Maintenance Work (NON SCHEDULE Work)\nSubmersible pump Repairing\n( f) 3 Hp starter repairing	item110	1	Nos.
111	28	Electrical Maintenance Work (NON SCHEDULE Work)\nFan Repairing\n( a) Fan copper rewinding & repairing 900 mm	item111	15	Nos.
112	28.1	Electrical Maintenance Work (NON SCHEDULE Work)\nFan Repairing\n( b) Fan copper rewinding & repairing1200 mm	item112	70	Nos.
113	28.2	Electrical Maintenance Work (NON SCHEDULE Work)\nFan Repairing\n( c) Fan copper rewinding & repairing 1400 mm	item113	5	Nos.
114	28.3	Electrical Maintenance Work (NON SCHEDULE Work)\nFan Repairing\n( d) Air fresher copper rewinding & repairing	item114	2	Nos.
115	28.4	Electrical Maintenance Work (NON SCHEDULE Work)\nFan Repairing\n( e) Air fresher copper rewinding & repairing	item115	2	Nos.
116	28.5	Electrical Maintenance Work (NON SCHEDULE Work)\nFan Repairing\n( f) Exhaust fan copper rewinding & repairing	item116	2	Nos.
117	28.6	Electrical Maintenance Work (NON SCHEDULE Work)\nFan Repairing\n( g) Replacement of bearing set	item117	5	Nos.
118	28.7	Electrical Maintenance Work (NON SCHEDULE Work)\nFan Repairing\n( h) pairing	item118	20	Nos.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Uttar Pradesh Tenders

Electrical Industry Tenders

Electrical Product Tenders

Electrical Products Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Purchase Of Electrical Maintenance Work, Biet Jhansi-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Purchase Of Electrical Maintenance Work, Biet Jhansi-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us