Name of Work: <Purchase of Scientific Instruments For Bio Medical Sciences>
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
Electrical Items :
2
1.01
Vertical Autoclave \nSize 500 × 300 mm (37 Lt., Medium Size) with outer SS and Lid SS make; \nDouble walled, complete with ON/OFF switch, water level, Radial locking device, Pedal lifting Device, pressure gauge, steam release valve and indicators to show the working of mains control system; Electrically operated on 220-230 V AC with S.S. Basket, working pressure 5-20 lb per square inch, automatic pressure switch and molded joint less gaskets made of Neoprene rubber.\n
item1
1
Nos
3
1.02
BSL-2 cabinet • BIO SAFETY CABINET-CLASS -II with Exhaust HEPA Filters with Virus Burn Out Unit for safety, Noise Level should be less than 60db\n• Working area 650x1200x725 mm Approx.i.e.4ft Width X 2ft Depth Pressure Gauge dial type with Needle Etc\n• Cabinet Exterior Material: Exterior Rust-Free MS Powder Coated, Working Area Heavy duty 304 Stainless steel or 316 Medical Grade\n• Left and Right Sides covered with Toughened Glass \n• Rear side should be rust free Mild Steel Powder coated.\n• Front sash Cover sliding Transparent Glass manual\n• HEPA Filters for inlet as well as for exhaust with an efficiency of 99.99% particle Size 0.3 Micron tested after successful installation in the laboratory for cleanliness in presence of Users.\n• Virus Burn out Unit integral part and supplied with the Cabinet Regulated Airflow within the cabinet,Electrical connection inside the cabinet for 6A as well as 15AMP -1 Each\n• UV as well as Routine Illumination should be provided\n• Gas petcock etc provided with machine.\n• castor wheel, Rust Free Stand Included\n• Onsite Warrantee for 24 months from the date of Installation.\n\n\n\n
item2
1
Nos
4
1.03
pH Meter Type : Microcontroller based\nAccuracy (pH) : + 0.5\nTemp. compensation type: Automatic\nTemp. accuracy (degree C): + 0.3\nType Microcontroller based\nDisplay LED/LCD/Touch screen, 3 digits\nCalibration up to 3 points, \npH range (pH) : 0.00 to 14.00\nAccuracy (pH) : + 0.05\nCorrosion resistant: Yes\nPower requirements: 230 V + 10, 50 Hz AC\nModes : pH, mV – C\n Resolution (pH): 0.001 \n
item3
2
Nos
5
1.04
Compound Microscope Transmitted illumination: Built in precentered halogen 20 watts with light intensity control.\n\nNose piece: Quadruple nosepiece to fix lens of\nvarious magnificationsAchromatic \n\nObjectives: 4x, 10x, 40x, 100X oil with anti fungus coating\n\nAbbe Condenser: Condenser should be integrated in the microscope\n\nMechanical stage: should be 120X132 mm\n\nEyepieces: pair of 10X with field of view of 18 mm\n\nFocusing system:Inbuilt coarse and fine focusing\n
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
