| 1 | 1 | Dismantling of plain or CGI steel sheeting, including ridges, hips and valley etc any gauge / thickness as in roof covering including nainital or similar pattern, complete all as specified and as directed. | | 775.14 | Sqm |
|---|
| 2 | 2 | Taking down wooden chowkats or frames with shutters with n.exc. 1.50 Sqm each (without taking of shutters from the frames) complete all as specified and as directed. | | 75 | Each |
|---|
| 3 | 3 | Taking down wooden chowkats or frames with shutters with exc. 1.50 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed. | | 15 | Each |
|---|
| 4 | 4 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. | | 425 | Sqm |
|---|
| 5 | 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for and segregating serviceable materials and keeping for reuse at site and removing unserviceable materials from site of work complete all as directed | | 0.25 | Qtl |
|---|
| 6 | 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. | | 362 | Sqm |
|---|
| 7 | 7 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. | | 21.57 | Cum |
|---|
| 8 | 8 | Demolition of cement concrete (reinforced) of any description and any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removal of rubbish from the site complete all as specified and as directed. | | 0.1 | Cum |
|---|
| 9 | 9 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc.15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. | | 16.81 | Cum |
|---|
| 10 | 10 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc. complete all as specified and as directed. | | 218 | Sqm |
|---|
| 11 | 11 | Demolition of reed, lathing, single or double including battens and plaster or chicken wire lathing and removing unserviceable materials from site of work complete all as directed. | | 602.88 | Sqm |
|---|
| 12 | 12 | Dismantling timber scantling 40 Sqcm and over in section, in any position in unframed work and removing materials from site of work complete all as directed. | | 21.48 | Cum |
|---|
| 13 | 13 | Taking up or down steel tubing 15mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed. | | 54 | Rm |
|---|
| 14 | 14 | Taking up or down steel tubing 20mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed. | | 60 | Rm |
|---|
| 15 | 15 | Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good disturbed surface in soft / loose soil complete all as specified and as directed. | | 88 | Each |
|---|
| 16 | 16 | Material and labour for PCC 1:3:6 type C2 (Using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. | | 3.04 | Cum |
|---|
| 17 | 17 | Material and labour for PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. | | 4.31 | Cum |
|---|
| 18 | 18 | M&L for precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate as in cover slab for manholes, dtains etc, set in cement mortar 1:4 including necessary formwork complete all as specified and directed. | | 0.11 | Cum |
|---|
| 19 | 19 | Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, paving, footpath etc and finished the surface even and smooth without using extra cement complete all as specified and as directed. | | 142.11 | Sqm |
|---|
| 20 | 20 | Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel and like etc complete all as specified and as directed. | | 6.67 | Cum |
|---|
| 21 | 21 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and as directed. | | 178.2 | Rm |
|---|
| 22 | 22 | Add or deduct for each 25 mm girth or part thereof over or under 30cm from item No. 21 above. (For adjustment only) | | 10 | Rm |
|---|
| 23 | 23 | M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surfaces of concrete, flat complete all as specified and as directed. | | 73.92 | Sqm |
|---|
| 24 | 24 | M & L for use and waste of form work to sides of pillars, posts, struts, piers, piers, columns and stanchions of square, rectangular or polygonal shape with rough finished surfaces of concrete complete all as specified and as directed. | | 176.4 | Sqm |
|---|
| 25 | 25 | M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide with rough finished surfaces of concrete complete all as specified and as directed. | | 1672.16 | Rm |
|---|
| 26 | 26 | M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 10cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide with rough finished surfaces of concrete complete all as specified and as directed. | | 836.08 | Rm |
|---|
| 27 | 27 | M&L for mild steel TMT bars 10mm dia and over , cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. | | 3000 | Kg |
|---|
| 28 | 28 | M&L for mild steel TMT bars 5mm to 10mm dia as in stirrups, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. | | 1733 | Kg |
|---|
| 29 | 29 | M&L for mild steel TMT bars 6mm to 8 mm dia , cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. | | 124 | Kg |
|---|
| 30 | 30 | Material and labour for RCC 1:1.5:3, type A1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. | | 10.55 | Cum |
|---|
| 31 | 31 | Material and labour for RCC 1:1.5:3, type A1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts concrete complete all as specified and as directed. | | 10.1 | Cum |
|---|
| 32 | 32 | Material and labour for RCC 1:1.5:3, type A1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. | | 19.22 | Cum |
|---|
| 33 | 33 | Material and labour for PCC (1:2:4), type B1, (using 20mm graded stone aggregate), as in cills, coping, benching on chajja, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamferred angles and throating with and including necessary formwork complete all as specified and as directed. | | 1.2 | Cum |
|---|
| 34 | 34 | Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. | | 4 | Cum |
|---|
| 35 | 35 | Materials and labour for half brick thick brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and as directed. | | 740 | Sqm |
|---|
| 36 | 36 | Supply and fixing steel work in tubular trusses i.e truss bottom, top bend, sides, side supports, holding plates, posts and base plate etc. including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 etc complete all as specified and as directed | | 5300 | Kg |
|---|
| 37 | 37 | Supply and fix rolled mild steel plates (plain or chequered) , channels, square out or notched (ordinary and countersunk) forming holes without any attachment confirming to Fe-410-W (Gde-E-250) Quality A complete all as specified and directed. | | 100 | Kg |
|---|
| 38 | 38 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.\n | | 730.26 | Sqm |
|---|
| 39 | 39 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.\n | | 44.88 | Sqm |
|---|
| 40 | 40 | Material and labour for 15 mm thick rendering cement plaster on fair dfaces of brickwork or concrete surface on wall / column / vertical surfaces in two layer first 10 mm thick and the surface shall be fair and even and 5mm thick finishing coat in cement mortar 1:4 mixed with integral water proofing compound @ 3% by weight of cement and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note: Integral water proofing compound shall be measured and paid separately under relevant supply only item.) | | 650 | Sqm |
|---|
| 41 | 41 | Material and labour for 10 mm thick rendering cement plaster on other than fair faces of brickwork or concrete surface on wall / column / vertical surfaces in cement mortar 1:6 and finished the surface even and smooth without using extra cement complete all as specified and directed. | | 981.56 | Sqm |
|---|
| 42 | 42 | Material and labour for suspended false ceiling using E-grid, 180 GSM (Exposed ceiling suspension system) of grid size 600 mm x 600 mm with main runner 38 mm x 24 mm and wall angle 24 mm x 24 mm using high pressure steam cured non asbestos fiber cement design board (E-board classic) in a grid of GI system duly suspended with 4 mm dia GI hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runner to be secured to structural soffits by hanger @ 1220 mm maximum c/c, the last hanger at the end of each main runner should not be placed at more than 450 mm from the adjascent wall, Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610 mm c/c so as to form 600 mm x 600 mm grid and painted with two coats of acrylic emulsion paint of approved shade / make over a coat of cement primer before installing it on the grid complete all as specified and as directed. (Make: Everest or equivqalent make as approved by GE.) | | 425 | Sqm |
|---|
| 43 | 43 | Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm shall be laid on floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour / shade / matrix of tiles over and including 15mm thick screed bed / bedding layer in CM (1:4) complete all as specified and as directed. | | 172 | Sqm |
|---|
| 44 | 44 | Material and labour for glazed ceramic coloured tiles of size 300x200x7mm thick shall be laid on wall / column / vertical surfaces as in dado / skirting, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the colour / shade / matrix of tiles over and including 10mm thick cement plaster / backing coat in CM (1:4) complete all as specified and as directed. | | 190 | Sqm |
|---|
| 45 | 45 | Material and labour for chequered cement concrete tiles, 20 cm x 20 cm x 25 mm in size, shall be laid on floor etc set and jointed and pointed in neat cement slurry over and including 15mm thick screed bed / bedding layer in CM (1:4) complete all as specified and as directed. | | 62 | Sqm |
|---|
| 46 | 46 | Supply only integral water proofing compound (WPC) of best quality (ISI marked on packet) complete all as specified and as directed.\n | | 50 | Kg |
|---|
| 47 | 47 | Supply and fixing 19/20mm dia mild steel chromium plated curtain rods with and including fixing socket complete all as specified and as directed. | | 46.9 | Rm |
|---|
| 48 | 48 | Supply and fixing aluminium anodized section for door shutter with frame, three track sliding window (2 x glazed and 1 x gauged shutter) and ventilator with half top hung glazed shutter & bottom half fixed type including necessary jointing cleats, screws etc and fixed complete all as specified and as directed. | | 298.75 | Kg |
|---|
| 49 | 49 | Supply and fixing alluminium channel for securing wire mesh of suitable size complete all as specified and as directed. | | 59.25 | Rm |
|---|
| 50 | 50 | Supply and fixing rubber beading for securing glass of suitable size complete all as specified and as directed. | | 235.79 | Rm |
|---|
| 51 | 51 | Supply and fixing door brush in vertical style for air insulation complete all as specified and as directed. | | 2 | Rm |
|---|
| 52 | 52 | Supply and fixing 4.00 mm thick Sheet glass, selected quality and glazing with rubber beading in square exe 0.50 Sqm in each pane complete all as specified and directed.\n | | 26.5 | Sqm |
|---|
| 53 | 53 | Supply and fixing 3 mm thick figured glass, pin head type ordinary quality and glazing with oil putty, glazing pin in square n.exe 0.50 Sqm in each pane complete all as specified and directed.\n | | 5.55 | Sqm |
|---|
| 54 | 54 | Supply and fixing PVC roller in aluminium body of suitable size for sliding shutter complete all as specified and as directed. | | 150 | Each |
|---|
| 55 | 55 | Supply and fixing side locks of aluminium body, suitable size for sliding shutter complete all as specified and as directed. | | 100 | Sqm |
|---|
| 56 | 56 | Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and as directed. | | 41 | Sqm |
|---|
| 57 | 57 | Supply and fix solid PVC door frame of size 50mm x 95mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. | | 58.8 | Rm |
|---|
| 58 | 58 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded decorative coloured laminates PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and decorative coloured laminates PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of decorative coloured laminates PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC laminated sheet beeding, and joined together with solvent cement, supplying and fixing in the frame at the site as per specification complete all as specified and as directed. | | 21.6 | Sqm |
|---|
| 59 | 59 | Supply and fix factory Made Solid PVC Moulded\nDoor Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. | | 22 | Sqm |
|---|
| 60 | 60 | Supply and fixing Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe.290.Gde-E-165 complete all as specified and as directed. | | 522.6 | Kg |
|---|
| 61 | 61 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, and fixed in the frame panel will be of wire gauze in lieu of PVC sheet panel, the wire gauze shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tubes, the wire gauze shall be streched to tighten firmly at site complete all as specified and as directed. | | 32 | Sqm |
|---|
| 62 | 62 | Supply and fixing 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. | | 160 | Each |
|---|
| 63 | 63 | Supply and fixing aluminium anodized, barrel tower bolts, 200mm long of extruded section complete all as specified and as directed. | | 62 | Each |
|---|
| 64 | 64 | Supply and fixing 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. | | 78 | Each |
|---|
| 65 | 65 | Supply and fixing 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts,of extruded sections or cast aluminium alloy complete all as specified and as directed. | | 16 | Each |
|---|
| 66 | 66 | Supply and fixing for 300mm long mild steel ordinary rat tail rod pattern springs for doors including roller and roller plate complete all as specified and as directed. | | 22 | Each |
|---|
| 67 | 67 | Supply and fixing in replacement vitreoues china wash down water closet pan (pedestal pattern) with 'P' or 'S' trap, front or back inlet, fixing bolts with and including white PVC seat cover and making all necessary connections complete all as specified and directed.\n | | 6 | Each |
|---|
| 68 | 68 | Supply and fixing in replacement vitreoues china WHB, white, flat back, of size 550X400mm including brackets, cutting for and pinning in ends of brackets, waste fittings brass chromium plated for glazed ware basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed.\n | | 6 | Each |
|---|
| 69 | 69 | Suppy only 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by. | | 6 | Each |
|---|
| 70 | 70 | Supply and fix as in replacement looking mirror of size 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.\n | | 6 | Each |
|---|
| 71 | 71 | Supply and fix 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd. | | 54 | Rm |
|---|
| 72 | 72 | Supply and fix 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd. | | 60 | Rm |
|---|
| 73 | 73 | Supply and fixing as in replacement for 15mm bore dia stop valve,fancy type, brass chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends fixed to GI pipe including taking down old unserviceable one complete all as specified and as directed .\n | | 12 | Each |
|---|
| 74 | 74 | Supply and fixing as in replacement 15mm bore dia bib taps cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe including taking down old unserviceable one complete all as specified and as directed.\n | | 12 | Each |
|---|
| 75 | 75 | Supply and fixing as in replacement 15mm dia PVC connections pipe 450mm long with PTMT nuts complete all as specified and as directed.\n | | 12 | Each |
|---|
| 76 | 76 | Supply and fix as in replacement of 15mm bore Chromium Plated pillar tap , cast copper alloy, with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe including taking down old unserviceable one complete all as specified and as directed by the Engr-in-Charge. \n | | 6 | Each |
|---|
| 77 | 77 | Supply and fixing as in replacement chromium plated towel rail 600mm long fixed with and including Chromium plated brass screws complete all as specified and as directed.\n | | 6 | Each |
|---|
| 78 | 78 | Supply and fix as in replacement soap dish chromium plated, vitreous china, approx size 160mm x 160mm x 90mm , fixed to wall with plugs and CP brass screws complete all as specified and directed.\n | | 6 | Each |
|---|
| 79 | 79 | Supply and fixing as in replacement 125mm dia chromium plated shower rose with revolving joints fixed to 15mm bore GI Pipe complete all as specified and as directed. | | 6 | Each |
|---|
| 80 | 80 | Supply and fixing in repair for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall / ceiling or laid under floors including taking down old unserviceable pipe complete all as specified and directed. | | 30 | Rm |
|---|
| 81 | 81 | S & F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. | | 18 | Each |
|---|
| 82 | 82 | S & F 75 mm bore PVC (SWR) vent cowl any radius complete all as specified and directed. | | 6 | Each |
|---|
| 83 | 83 | Supply and fixing in repair waste coupling of PTMT (half or full threaded) 32 mm dia complete all as specified and directed. | | 6 | Each |
|---|
| 84 | 84 | Supply and fixing 110 mmx 100 mm bore PVC (SWR) P Trap complete all as specified and as directed. | | 6 | Each |
|---|
| 85 | 85 | Supply and fixing 110 mm-75 mm bore PVC (SWR) reducer complete all as specified and as directed. | | 12 | Each |
|---|
| 86 | 86 | Supply and fixing as in replacement 125 mm dia grating doom with wastye hole of PTMT (minimum weight 40 gm) complete all as specified and as directed.\n | | 12 | Each |
|---|
| 87 | 87 | Supply and fixing as in replacement sheet glass assembly consisting 5.50 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 600 mm long complete all as specified and as directed.\n | | 6 | Each |
|---|
| 88 | 88 | Supply and fixing as in replacement shelf assembly of PTMT 12 cm wide fixed with chromium plated screws and wooden / plastic cleats etc (Minimum weight 300 gms) complete all as specified and as directed.\n | | 6 | Each |
|---|
| 89 | 89 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.\n | | 300 | Sqm |
|---|
| 90 | 90 | Materials and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistace primer after applying 3mm thick wall care putty complete all as specified and as directed.\n | | 981.56 | Sqm |
|---|
| 91 | 91 | Materials and labour for preparation of new plastered external surfaces of walls and applying two coats of acrylic emulsion anti fungal paint over a coat of primer complete all as specified and as directed.\n | | 650 | Sqm |
|---|
| 92 | 92 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, (including unscrewing from boards/out-let boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc.), removing materials off the site of work and making good disturbed surfaces of walls, floors, etc.all as directed. | | 190 | Per Point |
|---|
| 93 | 93 | Taking down unserviceable DB alongwith MCBs complete all as specified and directed. | | 10 | Each |
|---|
| 94 | 94 | Taking down old unserviceable sub main wiring, any size with batten / conduit etc complete all as specified and directed. | | 170 | Rm |
|---|
| 95 | 95 | Material and labour for point wiring for one light/fan/call bell point , concealed in wall / ceiling with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for earth continuity wire connected to common earth dolly drawn through and including PVC conduit of adequate size with all accessories and PVC rectangular boxes for mounting switch socket and fan regulator etc complete all as specified and as directed. \nNote: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. | | 138 | Per Point |
|---|
| 96 | 96 | All as per item No 96.00 here-in-before but for 3 pin 6 amps switch socket outlet on the same board with 1.5 Sqmm cable. | | 14 | Per Point |
|---|
| 97 | 97 | All as per item No 96.00 here-in-before but for 3 pin 6 amps switch socket outlet on the independent board with 1.5 Sqmm cable. | | 27 | Per Point |
|---|
| 98 | 98 | All as per item No 96.00 here-in-before but for one 3 pin 16 Amps switch socket combination on independent board with 2.5 sqmm PVC (FR-LSH) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.5 Sqmm PVC (FR-LSH) copper conductor cable as earth continuity conductor . | | 11 | Per Point |
|---|
| 99 | 99 | M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 tro ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed concealed conduit wiring etc and making good, cutting not exc. 10 cm girth complete all as specified and directed. | | 300 | Rm |
|---|
| 100 | 100 | Supply and fixing Piano switch flush button single pole one way 6 Amps complete all as specified and as directed.\n | | 152 | Each |
|---|
| 101 | 101 | Supply and fixing socket outlet 5 pin, 3 Amps, 230 volt flush type complete all as specified and as directed. \n | | 14 | Each |
|---|
| 102 | 102 | Supply and fixing switch socket combination 3 pin, 6 Amps, 230 volt flush type universal complete all as specified and as directed. \n | | 27 | Each |
|---|
| 103 | 103 | Supply and fixing switch socket combination 2 in 1, 6A/16A, 5 in 1 flush type complete all as specified and as directed.\n | | 11 | Each |
|---|
| 104 | 104 | Supply and fix ceiling rose surface Polycarbonate/ PVC three terminal complete all as specified and as directed.\n | | 138 | Each |
|---|
| 105 | 105 | Supply and fixing fan regulator 100/120 watt step type AC 220 Volt complete all as specified and as directed.\n | | 28 | Each |
|---|
| 106 | 106 | Material and labour for hanging / fixing of fan hook fabricated with two Nos. mild steel flat iron of 25 x 6 mm, 300 mm long, bend to shape and necessary drilling with and including MS butt bolts, nuts, washers etc as requirred, the steel surface shall be painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed. | | 28 | Each |
|---|
| 107 | 107 | Taking down ceiling fan carefully of any sweep from its original position, dismantling the complete fan, cleaning all dust particle, applying grease for bearing, applying spray painting of synthetic enamel paint of supirior quality including filling up cavities with filler, reassembling the fan and blades and hanging the fan in same position, making connection with PVC insulated 3 core copper conductor and testing on completion complete all as specified and directed. | | 18 | Each |
|---|
| 108 | 108 | Taking down ceiling fan carefully of any sweep from its original position, dismantling the complete fan, cleaning all dust particle, applying grease for bearing, rewinding fan with suitable gauge of superenamelled copper wire, insulating, heating, vernishing , applying spray painting of synthetic enamel paint of supirior quality including filling up cavities with filler, reassembling the fan and blades and hanging the fan in same position, making connection with PVC insulated 3 core copper conductor and testing on completion complete all as specified and directed. | | 10 | Each |
|---|
| 109 | 109 | Supply and fixing / hanging ceiling fan with and including regulator (as provided by the company) of 1200 mm sweep, 05 star BEE rating, 230 volts, single phase, 50 Hz and connecting the fan with PVC insulated 3 core copper conductor cable from fan to ceiling rose complete all as specified and directed. | | 10 | Each |
|---|
| 110 | 110 | Material and labour for replacement of capacitor 2.5 MFD including making electrical connection complerte all as specified and directed. | | 11 | Each |
|---|
| 111 | 111 | Taking down exhaust fan carefully of any size from its original position after disconnecting electric connection and deposited to MES store for BER board complete all as specified and directed. | | 10 | Each |
|---|
| 112 | 112 | Supply and fixing exhaust fan for having PVC body of size 250 mm complete with louver shutter and rating 230 volts, single phase, 50 Hz including necessary cutting of holes in existing wall and making good the surface and connecting the fan with PVC insulated 3 core copper conductor cable from fan to ceiling rose complete all as specified and directed. | | 10 | Each |
|---|
| 113 | 113 | Supply and fixing as in replacement MCB DB TPN 4 ways double door, 415 Volts, including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed.\n | | 6 | Each |
|---|
| 114 | 114 | Supply and fixing as in replacement MCB DB SPN 8 ways double door, 230 Volts, including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall including taking down old unserviceable DB alongwith MCBs complete all as specified and as directed.\n | | 2 | Each |
|---|
| 115 | 115 | Supply and fixing as in replacement MCB DB SPN 4 ways double door, 230 Volts, including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall including taking down old unserviceable DB alongwith MCBs complete all as specified and as directed.\n | | 2 | Each |
|---|
| 116 | 116 | Supply and fixing MCB 63 Amps, TPN, 415 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed.\n | | 2 | Each |
|---|
| 117 | 117 | Supply and fixing MCB 40 Amps, SPN, 230 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed.\n | | 18 | Each |
|---|
| 118 | 118 | Supply and fixing MCB 6 - 32 Amps, SP, 230 Volt \"C\" series, breaking capacity 10 KA complete all as specified and as directed.\n | | 43 | Sqm |
|---|
| 119 | 119 | Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through PVC rigid conduit of adequate size with all accessories complete all as specified and as directed.\n\nNote : Three runs of 6 Sqmm cable and one run of Casing Caping shall be measured as one unit for payment purpose. | | 170 | Rm |
|---|
| 120 | 120 | Supply and fixing in replacement for angle lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. | | 12 | Each |
|---|
| 121 | 121 | Supply and fix in replacement LED lamp / bulb , ball type of 10 W complete all as specified and as directed. | | 12 | Each |
|---|
| 122 | 122 | Supply and fix in replacement LED light fittings with integral lamp, 20 Watt with basic all purpose surface and wall mounted LED batten with aluminium housing and integrated electronic driver and connecting with twine core twisted copper weir from fittings to ceiling rose complete all as specified and directed. (Make: Cat No. LUMILINEPLUSBS20WLED865SPCSS of Havells or equivalent model of Bajaj / Philips.) | | 70 | Each |
|---|
| 123 | 123 | Supply and fix in replacement LED light fittings with integral lamp, 10 Watt with basic all purpose surface and wall mounted LED batten with aluminium housing and integrated electronic driver and connecting with twine core twisted copper weir from fittings to ceiling rose complete all as specified and directed. (Make: Cat No. LUMILINEPLUSBS10WLED865SPCSS of Havells or equivalent model of Bajaj / Philips.) | | 10 | Each |
|---|
| 124 | 124 | Supply and fix in replacement environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LED with IP-65 protection level with integrated lamp and connecting with twine core twisted copper weir from fittings to ceiling rose complete all as specified and directed. (Make: Cat No. RUGBYNEONFT10WLED860SSYMTOPC of Havells or equivalent model of Bajaj / Philips.) | | 10 | Each |
|---|
| 125 | 125 | Supply and fix in replacement energy saving and environmental friendly security light fittings, 15 W, long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 inclluding bracket made out of 40 mm dia light grade GI tubing , 1.50 m long and making necessary electrical connection complete all as specified and directed. (Make: Cat No. ENDURAPEARLSL15WLED757SASYTOPC of Havells or equivalent model of Bajaj / Philips.) | | 8 | Each |
|---|
| 126 | 126 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed. | | 2 | Each Set |
|---|
| 127 | 127 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre depth foundation of poles, cables etc and getting out in soft / loose soil complete all as specified and as directed. | | 9.92 | Cum |
|---|
| 128 | 128 | Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed . | | 4.66 | Cum |
|---|
| 129 | 129 | Removing excavated material to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed . | | 5.26 | Cum |
|---|
| 130 | 130 | Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to desired thickness complete all as specified and as directed. | | 3.97 | Cum |
|---|
| 131 | 131 | Materials and labour for brick protection cover to underground cables with sub class ‘B’ over burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed. | | 392 | Each |
|---|
| 132 | 132 | Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 10 Sqmm 4 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc including taking down unservicable cable complete all as specified and as directed.\n\nNote : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item. | | 69 | Rm |
|---|
| 133 | 133 | Supply, install, testing and commissioning CPRI approved bus bar box outdoor type of size 0.60 m x 0.60 m x 0.45 m , cubical, floor mounted type (IP-65 degree of protection) made out of 3.00 mm thick MS sheet duly paited with two coats of synthetic enamel paint over a coat of red oxide primer, 200 amps rating bus bar made out of aluminium strip duly drilled hole for connections and mounting on epoxy based post insulator for 3 phase, 4 wire system, 415 Volt, 50 Hz AC supply, having cable entry boxes, cable gland including 50 x 50 x 6 mm angle iron frame structure at bottom portion of box and grouted using PCC 1:2:4 type B2 (using 40 mm graded stone aggregate), totally tested as per IEC 61439-I complete all as specified and directed. | | 1 | Each Job |
|---|
| 134 | 134 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of 25 x 4mm size by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 32mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed. | | 3 | Each Set |
|---|
