Day To Day B R Maintenance Including Periodical Services At Icgs Dahanu Area Under Ge Daman

Tender Notice

23365763
Day To Day B R Maintenance Including Periodical Services At Icgs Dahanu Area Under Ge Daman
Indian
Daman And Diu
28-02-2020
04-03-2020
09-03-2020

Tender Details

Day To Day B R Maintenance Including Periodical Services At Icgs Dahanu Area Under Ge Daman

Corrigendum Details

Sr No CorrigendumDate Description Submission Date
1 03-02-2020 8457AMENDMENTINDATE 15-02-2020
2 17-02-2020 8457AMENDMENTTODATE 24-02-2020
3 25-02-2020 8457AMENDMENTINDATE2 26-02-2020
4 28-02-2020 8457AMENDMENTINDATE3 04-03-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 21000.00 /-
Tender Value
INR 10.50 Lakhs /-

BOQ Items

Name of Work: DAY TO DAY B/R MAINT INCLUDING PERIODICAL SERVICES AT ICGS DAHANU AREA UNDER GE DAMAN
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material , complete all as specified and as directed . 1 16 Cum
2 2 M&L100 mm thick PCC 1:3:6 type C2(Using 40 mm graded stone aggregate) as in sub base of floor and path , complete all as specified and as directed . 2 100 Sqm
3 3 Material and labour for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor finished even and smooth with out using extra cement complete all as specified and directed . 3 20 Sqm
4 4 Supply and fixing chequered cement concrete tiles, rubber moulded with laquer polish for extra shine, size 300 mm x 300 mm x 22-25 mm thick, ISI marked, coloured, set jointed and pointed in neat cement slurry over and including 20 mm thick (average thickness) cement screed (1:4) base, complete all as specified and as directed . 4 60 Sqm
5 5 Material and labour, factory made, precast concrete, prepolished , rubber moulded vibratory compacted, interlocking paver block any shape and size confirming to IS : 15658-2006 of 60mm thickness, M-35 Grade, with grey cement and pigment (in top layer), laid over and including 25mm thick fine sand cushioning and joints filled with fine sand , complete all as specified and directed.\nNote: Rate includes supply and spreading of sand. 5 50 Sqm
6 6 M&L PCC 1:2:4 type B1, using 20 mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edge , complete all as specified and directed. 6 1 Cum
7 7 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.\n 7 40 Sqm
8 8 Dismantling floor, hearth or wall tiling, terrazzo toping/ dado, including cement mortar bedding/backing and removing rubbish off the premises of MoD land, including preparation of dismantled surface area to receive backing coat/bedding layer for tiles/ stones etc, complete all as specified and directed. 8 135 Per Sqm
9 9 Taking down chowkhats or frames exc 1.5 sqm but not exc 4.0 sqm each with shutters without taking off shutters from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed protion in cement mortar (1:3) or PCC 1:2:4 type B1 (after inserting new hold fast if required), compete all as specified and as directed. Note:(Hold fast shall be measured and paid seperately). 9 2 Each
10 10 Taking down shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each, from chowkhat complete all as specified and as directed . 10 1 Per Leaf
11 11 M & L for Resecuring or easing & adjusting without taking down shutters of any description exc 1.00 sqm not exc 2.00 sqm each complete all as specified and directed. 11 15 Per Leaf
12 12 Supply and fixing for 2nd class hard wood(Sal / hollack) plain, solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and as directed by the Engineer-in-Charge. 12 0.03 Cum
13 13 S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 , complete all as specified and directed. 2 Kgs
14 14 S&F Factory made 30mm thick Flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both sides etc complete all as specified and as direted . 5 Sqm
15 15 M&L for preparation of new wood surfaces of any description exc 10cm width or girth and applying two coats of synthethic enamel paint over a coat of pink primer etc complete all as specified and as directed. 7 Sqm
16 16 S & F factory made PVC solid PVC door frame chowkhat size 50mm x 47mm made out of 5 mm plain colour PVC sheet rainforced with MS square tube, supplying and fixing in opening complete all as specified and as directed. 4 RM
17 17 S & F factory made solid panel PVC door shutter 30 mm thick (style) considting of frame made out of MS tubes for top & bottom rails, MS frames shall covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both sides prelaminated PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling, of both sides prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading, and jointed together with solvent cment, styles and rails feathered at edges, supplying & fixing in the frame at site as per specification and drawing. 1.25 Sqm
18 18 S&F stainless steel butt hinges medium weight (ISI Marked) stainless steel 100 mm size in any position all as specified and directed. 9 Each
19 19 S&F aluminium anodised barrel tower bolt of extruded section 200 mm long fixed in any position etc complete all as specified and as direted. 4 Each
20 20 S&F aluminium anodised barrel tower bolt of extruded section 100 mm long fixed in any position etc complete all as specified and as direted. 2 Each
21 21 S&F extruded aluminium alloy handle fabricated type anodised 150 mm long fixed in any position etc complete all as specified and as direted . 4 Each
22 22 S&F extruded aluminium alloy handle fabricated type anodised 100 mm long fixed in any position etc complete all as specified and as direted . 2 Each
23 23 Supply and fix 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding of extruded sections or cast aluminium alloy etc complete all as specified and as direted . 2 Each
24 24 S&F aluminium alloy body and tongue, anodised Floor door stopper 150 mm long with hard drawn spring fixed in any position etc complete all as specified and as direted . 2 Each
25 25 Hacking out old broken glass (any thickness, size quality or description from wooden/metal frames) glazed with putty or fixed with beads or screws etc complete all as specified and as directed. 5 Per Sqm
26 26 S & F sheet glass 4 mm thick pin headed /figured glass fixed with rubber gaskets in aluminium ventilators or fixing with oil putty in steel/wooden ventilators in square not exc 0.5 Sqm in each pane (cost of using Jhulla system is included) fixed at any position including all necessary fittings etc complete all as specified and as directed. 5 Per Sqm
27 27 25 mm thick, PCC (1:2:4), type B-0 using 12.5 mm graded mechanically crushed stone aggregates as in flooring finished even & rough to receive the bedding mortar, complete all as specified and directed . 90 Sqm
28 28 S&F for Premium quality non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles over 15 mm screed bedding in cement mortar 1:4 complete all as specified and directed. 30 Sqm
29 29 All as per item No.28 above but on vertical surfaces such as skirting / dados including 10 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed. 20 Sqm
30 30 M&L for Premium quality vitrified coloured tiles of 9-10 mm thick (square / rectangular) area of each tiles not exc 0.38 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles over 15 mm screed bedding in cement mortar 1:4 complete all as specified and directed. 40 Sqm
31 31 M&L for Premium quality non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles over 15 mm screed bedding in cement mortar 1:4 complete all as specified and directed. 20 Sqm
32 32 Material and labour for Premium quality, glazed coloured ceramic tiles 200 x 300 x 7mm thick on vertical faces including 10mm thick rough finished plaster in cement mortar (1:4) set jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified and as directed by the Engineer-in-Charge. 25 Sqm
33 33 S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples on exisitng wooden beading etc complete all as specified and directed. 18 Per Sqm
34 34 S&F in repair curtain rod bracket aluminium anodised for 20 mm dia pipe all as specified and directed. 10 Per Pair
35 35 S&F in repair curtain rod aluminium anodised for 20 mm dia pipe all as specified and directed . 8 Per RM
36 36 S & F in repairs stainless steel sinks with drainage board , ISI marked ,made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces, complete all as specified and directed. Make: NIRALI / SHAKTI / PRAYAG/ NEELKHANT. 1 Each
37 37 Supplying & Fixing for stainless steel plate rack standard size 1000mmx750mm mm complete and fixing with rawl plug and steel screws of wt not less than 5 kg EACH, complete, all as specified and as directed by the Engineer-in-Charge.\n(Make : Prayag Cat No. P-330 or equivalent in SHAKTI/NEELKHANT 1 Each
38 38 S&F in repairs standard size EWC white colour with P/S trap white coloured with and including PVC white coloured seat cover including all and connecting to flushing cistern complete all as specified and directed. 1 Each
39 39 Supplying and fixing (in repair) vitreous China coloured squatting pan of Orissa pattern size 580mmx440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including lime concrete, making good to disturbed surface of sub base and flooring with the existing surface and connection to flush pipe complete all as specified and as directed by the Engineer-in-Charge.(Make : Prayag Cat No. 4054 or equivalent model in PARRYWARES / HINDWARE / CERA 1 Each
40 40 S&F in repair vitreous china WHB flat back size 550x400 mm& supply only pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes including cutting for and pinning in ends of CI brackets and making good wall or floor fitting to match existing complete all as specified and as directed. 1 Each
41 41 S&F in repair vitreous china, 1st quality urinal half stall type, white, with and including brass chromium plated flush pin, 40mm dia brass CP waste coupling and 40mm dia PVC HDPE waste pipe with all other necessary fittings etc complete all as specified and directed. 1 Each
42 42 Supply and fixing 10 litre capacity, low level, virgin polypropylene cistern, ISI marked, coloured complete with PVC bend/flush pipe and making all connection including taking down existing high or low level unerviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and as directed. 3 Each
43 43 Supply and fix, bib taps long body cast copper alloy chromium plated with capstan head,with flange, screwed down, screwed for iron pipe or for brass ferrule 15mm bore, as in repairs, complete all as specified and directed.Make: ESS ESS / JAINKO / PRAYAG /PRIMA 5 Each
44 44 S & f in repair bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule, complete all as specified and directed .Make: ESS ESS / JAINKO / PRAYAG /PRIMA 10 Each
45 45 S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. 2 Each
46 46 S & F in repair ,Pillar taps, cast copper alloy, with capstan heads, chromium plated,fancy type , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe , complete all as specified and directed . Make: ESS ESS / JAINKO / PRAYAG /PRIMA 2 Each
47 47 S & F in repair angle stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule , complete all as specified and directed . \nMake: ESS ESS / JAINKO / PRAYAG /PRIMA 5 Each
48 48 S & F in repair stop valves, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions , complete all as specified and directed.\n Make: ESS ESS / JAINKO / PRAYAG /PRIMA 2 Each
49 49 S&F in repairs Health Faucet with 1 meter CP flexible tube & hook including 2 way bib cock double handle with flange and all necessary fittings all as specified and directed. \n Make: ESS ESS / JAINKO / PRAYAG /PRIMA 3 Each
50 50 S&F in repairs 15 mm dia of bore, 2 way bib cock double handle with flange and all necessary fittings all as specified and directed. \nMake: ESS ESS / JAINKO / PRAYAG /PRIMA 3 Each
51 51 S&F in repairs bathroom GLASS shelf 500x60MM(WITH abs BRACKET) 450X125X6 and fixing to plastered/tiled walls by drilling and fixing using suitable screws etc complete all as specified. \nMake: PRAYAG CAT NO BEA-47 OR EQUIVALENT INESS ESS / JAINKO /PRIMA 1 Each
52 52 S&F in repairs 450 x 600mm bevelled edged mirror of selected glass 5mm thick mounted on PVC back frame for hinging with chromium plated brass screws and cup washers complete all specified and directed. 3 Each
53 53 S&F in repair D type towel rail 600mm long PTMT fixed with and including chromium plated brass screwes and wooden/plastic cleats complete all as specified and directed. \nMake: PRAYAG CAT NO BEA-47 OR EQUIVALENT IN ESS ESS / JAINKO /PRIMA 3 Each
54 54 Supply and fix in repair PVC seat cover for EWC white in colour, solid body, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed. 3 Each
55 55 S&F in repair standard quality stainless steel toilet paper holder complete all as specified and directed.Make: PRAYAG CAT NO BA-88 OR EQUIVALENT IN ESS ESS / JAINKO /PRIMA 1 Each
56 56 Supply and fixing in repair, fancy type shower arm 125 mm size of Rim and 30 cm long CP brass pipe with swiwel joint complete all as specified and as directed by the Engineer-in-Charge. 2 Each
57 57 S&F in repairs grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed. 2 Each
58 58 S&F in repairs waste coupling 32mm brass chromium plated ISI for WHB complete all as specified and directed . 1 Each
59 59 S&F in repairs waste coupling 40 mm dia brass CP for kitchen steel sink complete all as specified and directed. 1 Each
60 60 S&F in repair white/ colour PVC drain pipe long socket waste pipe for wash basin / kitchen sink water outlet complete all as specified and directed. 2 Each
61 61 Servicing of low level flushing cistern, sealing of flush pipe joints and making the cistern fuctional duly checking of alignment of its fittings and fixtures all as specified and directed . 3 Each
62 62 M&L for unscrew and refix the bib tap, pillar tap, stop cock 15mm bore and replacing the wornout washers/spindle etc and making leak proof all as specified and directed. 10 Each
63 63 Labour only for unscrewing of existing GI pipe 15 mm/20 mm externally fixed to wall including taking from wall for removing air lock or any blockage and refixing in position and making leak proof joints complete all as specified and directed.\n(Note : The rate shall include Jhulla system with rope). 5 Each Job
64 64 Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc.,including cleaning for refixing or removing from site , complete all as specified and directed. 24 Per RM
65 65 S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, including cutting existing steel tubing & screwing, if required for alterations and additions , complete all as specified and directed. 24 Per RM
66 66 Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, floor etc.including cleaning for refixing or removing from site , complete all as specified and directed. 24 RM
67 67 S & F 20 mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed. \n 24 RM
68 68 S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. 3 Each
69 69 S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed 4 Each
70 70 M&L for low density polythene pipes (LDPE) of pressure rating 6 Kg/Sqm outer dia of pipe 40 mm fixed in waste pipe and water closet in repairs all as specified and directed . 4 Per RM
71 71 S&F in repairs cast iron floor trap with dia of outlet 75 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. 1 Each
72 72 S&F in repairs 15mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.\n 2 Each
73 73 S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.\n 2 Each
74 74 Taking out existing unserviceable gate valves and supply and fix gun metal gate valve 25 mm dia with iron wheel head screwed both ends for iron pipes/fitting including necessary fittings like GI Tee,nipple etc complete all as specified and directed.\n 1 Each
75 75 Taking out existing unserviceable gate valves and supply and fix gun metal gate valve 20 mm dia with iron wheel head screwed both ends for iron pipes/fitting including necessary fittings like GI Tee,nipple etc complete all as specified and directed.\n 2 Each
76 76 Taking out existing unserviceable gate valves and supply and fix gun metal gate valve 15 mm dia with iron wheel head screwed both ends for iron pipes/fitting including necessary fittings like GI Tee,nipple etc complete all as specified and directed.\n 2 Each
77 77 M&L for welding in repairs, cleaning and preparing the surfaces to be welded together, holding the members in the position with welding and levelling of edge providing running welding all as specified, thickness of welding 6 to 9 mm and including inspection of old doors and steel structures including errection of scafolding for the same ,complete all as specified and directed. 2 Per Ten CM
78 78 S&F in repair, PVC socket of 32mm dia ,complete all as specified and directed.. 5 Each
79 79 S&F in repair, PVC socket of 40mm dia ,complete all as specified and directed.. 5 Each
80 80 S&F in repair, PVC socket of 50mm dia ,complete all as specified and directed.. 5 Each
81 81 S&F in repair, PVC Elbow of 32mm dia ,complete all as specified and directed.. 5 Each
82 82 S&F in repair, PVC Elbow of 40mm dia ,complete all as specified and directed.. 5 Each
83 83 S&F in repair, PVC Elbow of 50mm dia ,complete all as specified and directed.. 5 Each
84 84 S&F in repairs GI medium grade nipple 100mm long of 15mm bore complete all as specified and directed. 10 Each
85 85 S&F in repairs GI medium grade nipple 150mm long of 15mm bore complete all as specified and directed. 10 Each
86 86 S&F in repairs GI medium grade Unions for 20mm bore of pipe complete all specified and directed. 5 Each
87 87 S&F in repairs GI medium grade Unions for 15mm bore of pipe complete all specified and directed. 5 Each
88 88 Taking down cement plaster of any description from brick or stone wall surfaces including racking out joints hacking for key, scrubbing down with water complete all as specified. 180 Sqm
89 89 M&L 20 mm thick plaster in two layer (15 mm + 5 mm) on external surfaces of brick or stone masonar wall( Other than fair faces) in CM 1:4 using integral water proofing compond, finished even and smooth without using extra cement \n Note :-WATER PROOFING COMPOUND SHALL BE MEASURED AND PAID FOR SPERATELY. 100 Sm
90 90 M&L 15 mm thick plaster in CM 1:6 on brick wall or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. 80 Sqm
91 91 M&L including preparation of new surfaces on walls with plaster putty and applying two coats of oil bound distemper paint on walls over a coat of alkali resistant primer etc complete all as specified and as directed . 80 Sqm
92 92 M&L for preparation of new plastered surfaces of walls, chajjas, parapets by removing all dirt and loose materials and applying two coat of acrylic exterior paint as per manufacturer's instructions to match the existing surfaces complete all as specified and directed. 100 Sqm
93 93 Supply only crack seal compound.(Chemistic/Dr fix it) 5 KG
94 94 M&L for 10mm thick screed bed in CM (1:4) laid on roof surfaces mixed with integral water proofing compound @ 2% by weight of cement, including finishing the surfaces even and smooth without using extra cement. (Note: WPC shall be measured and paid separately). 20 Sqm
95 95 M&L for WPT to roof surface thoroughly wire brushed, washed and dried up and cleaned of all foreign matter and dust to receive Shalitex primer @300 gms/sqm for laying 3.00 mm thick super thermolay (APP modified membrane with polyster reinforcement) 3.6 Kg/Sqm laid by torch application method and 75mm overlap in longitudinal direction and 100mm in transverse direction, a coat of silver shield (solar reflective aluminium paint) @ 0.12 Kg/Sqm all as per mfgs instructions etc complete all as specified and as directed. 20 Sqm
96 96 Cleaning/clearing blockage in traps of WC's, Floor traps, Nanhi traps, Gully traps, Bends (with or without door), T junctions (with or without door) etc in any position and making the sewer system (sewage and sullage) fully functional by suitable mechanical means etc complete. \nNote:- Each job shall be carried out in a day to day requirement basis as specified and directed by Engineer-in-charge. 10 Each Job
97 97 Cleaning/clearing blockage in manholes of any description and size but depth not exceeding 1.80m from GL by suitable mechanical means and making fully functional etc complete. Note:- Each job shall be carried out in a day to day requirement basis as specified and directed by Engineer-in-charge. 10 Each Job
98 98 Cleaning/de-sludging of SWG/RCC Sewage lines of any dia not exc 250mm bore of pipe by using suitable mechanical means including disposal of any sludge/excreta/sullage/sewage in closed tanker and disposing the same to designated places as earmarked by the local bodies or disposing the same under own arrangement of contracotr complete. Note:- This job shall be carried out in a day to day requirement basis as specified and directed by Engineer-in-charge. 10 RM
99 99 De-sludging/De-silting of septic tank including filter bed by bailing out fluid, decomposed materials sludge etc outside MD land complete all as directed by Engineer-in-charge. \n Note 1. Sludege/de-composed materials obtained from cleaning shall be removed outside MD land by mechanical sewage cleaning tanks and disposed off to designated places as ear marked by local bodies.\n Note 2. Rate inclusive of clearing away all grass vegetation, saplings shrubs and trees not exceeding 30cm girth upto 3 mtrs alround the septic tank and removing rubbish upto a distance 50mtrs outside the periphery area. (a) 50 user septic tank 2 Each Job
100 100 All as per Ser item No 99 as above but 300 user septic tank 1 Each Job
101 101 Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified and as directed by the Engineer-in-Charge. 1 Cum
102 102 Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcement as required to facilitate demolition and removal the rubbish/ demolished material outside defence land, complete all as specified and as directed by the Engineer-in-Charge. 1 Cum
103 103 M&L for precast reinforced cement concrete PCC 1:2:4 type B-1 (20 mm graded aggregate) as in manhole/drain cover slabs etc set in CM 1:4 including use and waste of formwork and finishing top surface of cover slab even and smooth using extra cement etc complete all as specified and directed. (Note : Steel reinforcement and formwork shall be measured and paid separately) 1 Cum
104 104 Material and Labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete, all as specified and as directed by the Engineer-in-Charge. 60 Kg
105 105 Excavating in trenches, not exceeding 1.50 metre wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sq.m on plan and not exceeding 1.50m in depth and getting out in soft/loose soil, complete all as specified and as directed by the Engineer-in-Charge. 10 Cum
106 106 Material and labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation filling and mass concrete, complete all as specified and as directed by the Engineer-in-Charge. 1 Cum
107 107 Material and labour for brick work with sub class ‘B’ bricks burnt, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified and as directed by the Engineer-in-Charge. 1 Cum
108 108 M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in surface channels in manholes etc complete all as specified and directed. 0.5 Cum
109 109 M&L for PCC 1:2:4 type -B1 using 20mm graded aggregate as in coping with and inclusive of form work as required etc complete all as specified and directed. 0.5 Cum
110 110 M&L for rendering 15mm thick in CM 1:4, on fair faces of brick work or concrete surface, finished even and smooth without using extra cement, complete all as specified and directed. 8 Sqm
111 111 M&L for demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM (Internal dia of pipe 150 mm) 50 RM
112 112 M & L for concrete bed to drain pipes including forming cradles in cement concrete 1:3:6, type C 2 (using 40 mm graded stone agg.) for bore of pipe 150 mm all as specified and as directed. 50 RM
113 113 M&L for 150 mm dia reinforced concrete pipes class NP2 laid and jointed with collars complete all as specified and directed. 50 RM
114 114 S&F in repair PVC (SWR) pipes 110mm bore single socketed, in any length and any description with rubber ring joints fixed to walls etc all as specified and directed. 50 RM
115 115 S&F in repair110mm bore of pipe PVC (SWR Grade) bends of any radius all as specified and directed. 5 Each
116 116 M&L for returning filling in foundation trenches with available soil spread and levelled in layers n exc 25cm thick each layer watered and well rammed to a true surface, complete all as specified and directed. 7 Cum
117 117 M&L for removal of surplus excavated soil to a distance exc 250m but n.exc. 500 m and depositing outside MD land etc complete all as specified and directed. 3 Cum
118 118 M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching internal dia of pipe 150mm etc complete all as specified and directed. 1 Each
119 119 M&L for preparation of old decorated plastered or un-plastered wall surfaces including pilasters & cornices etc brooming down by using steel wire brushes scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white washing complete all as specified and directed. 200 Sqm
120 120 All as per above item no. 119 here in before but in ceiling surfaces. 650 Sqm
121 121 M&L One coat of oil bound distemper on old decorated plastered surfaces/unplastered of wall including preparation of wall surfaces complete all as specified and as directed . (Brand Asian Paints or equivalent as approved by GE) 2000 Sqm
122 122 M&L for preparation of old decorated plastered surfaces of walls, chajjas, parapets by removing loose materials and applying one coat of acrylic exterior paint hight n.exc15 m (Brand Apex manufactured by Asian Paints or equivalent as approved by GE) as per manufacturer's instructions and complete all as specified and directed by Engineer-in-Charge. 3000 Sqm
123 123 M&L for preparation old surfaces of wall and applying one coat of cement base paint of any tint to match the existing surface complete all as specified and as directed. 2500 Sqm
124 124 M&L for preparation of old painted wooden surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed . 100 Sqm
125 125 M&L for preparation of existing old painted steel surfaces of hangar doors,etc girth exc 10 CM and applying one coat of synthetic enamel paint (1st quality) hight n.exc 15m, complete all as specified and directed by Engineer-in-Charge. 111 Sqm
126 126 M&L for re-writing letters or figures (Block, roman, Italic or Indian) not exc 30cm height, width not less than 25mm including circular base of combination of different colours with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. \n 2 Per Ten Nos(Per CM of ht)
127 127 M&L for re-writing of Stops, commas, short lines, dashes, hyphens, brackets, etc. including circular base of combination of different colours with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. \n\nNote:- Amount of credit of Rs. 2393.00 for retrieved materials is mentioned in Schedule of Credit Page of tender documents in pdf form which will be deducted offline while acceptance of tender. 1 Per Ten Nos
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail