}

Special Repair For Main Dsc Barrack And Guard Room At Nad Goa Under Ge Gomantak Vasco, CWE NAVY VASCO-Goa

Military Engineer Services-MES has published Special Repair For Main Dsc Barrack And Guard Room At Nad Goa Under Ge Gomantak Vasco. Submission Date for this Tender is 29-02-2020. Building Work Tenders in CWE NAVY VASCO Goa. Bidders can get complete Tender details and download the document.




Tender Notice

23337228
Corrigendum : Special Repair For Main Dsc Barrack And Guard Room At Nad Goa Under Ge Gomantak Vasco
Open Tender
Indian
Goa
CWE NAVY VASCO
29-02-2020

Tender Details

Special Repair For Main Dsc Barrack And Guard Room At Nad Goa Under Ge Gomantak Vasco

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 04-Feb-2020 DATE CORR Date 18-02-2020
2 10-Feb-2020 DATECORRI2 Date 22-02-2020
3 24-Feb-2020 DATE CORR 2 Date 29-02-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 38000.0 /-
Tender Value
INR 19 Lakhs /-

BOQ Items

NAME OF WORK:SPECIAL REPAIR FOR MAIN DSC BARRACK AND GUARD ROOM AT NAD GOA UNDER GE GOMANTAK VASCO
Sl. No. Item Description Item Code / Make Quantity Units
1 0.5 Schedule 'A' : Part I B/R works
2 1 Taking down chowkats with shutters without taking off shutters from the frames area n exc 1.5 Sqm all as specified and as directed. 10 Each
3 2 Taking down chowkats with shutters without taking off shutters from the frame area exc 1.5 Sqm and n. exc 4.00 Sqm each all as specified and as directed. 2 Each
4 3 M&L for 2nd Class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed. 0.075 Cum
5 4 S&F for 35 mm thick 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides, (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats all as specified and as directed. 4 Sqm
6 5 Supplying & fixing in opening Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, all as specified and as directed. 28 RM
7 6 Supplying & fixing in frame at site Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, as per specification all as specified and as directed. 9 Sqm
8 7 M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old ,of any description and girth ,not otherwise described, and treated with tar or coal tar black paint all as specified and as directed. 1 Sqm
9 8 M&L for sanding newly tarred or painted surfaces with clean sharp sand all as specified and as directed.. 6 Sqm
10 9 Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3, exc half brick but n exc one brick ( Depth of embedded portion of hold fasts or lugs measured from the face of the jamb into the wall) all as specified and as directed. 6 Each
11 10 M & L for treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each,all as specified and as directed. 0.06 100 Nos
12 11 S & F MS Flat bands, straps, supports or stays & hold fasts and similar small articles confirming to grade Fe – 290 Gde E 165. all as specified and as directed. 2 Kg
13 12 S&F butt hinge 100mm long stainless steel all as specified and as directed. 30 Each
14 13 S&F 150mm long extruded aluminium alloy handle fabricated Type polished all as specified and as directed. 18 Each
15 14 S&F150 mm long aluminium anodised, barrel tower bolt all as specified and as directed. 18 Each
16 15 S&F 300 mm long, aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section fixing bolts and sliding bolt of extruded section or cast aluminium alloy all as specified and as directed. 4 Each
17 16 S&F Aluminium powder coated window/ventilators shutter including frame, any type sliding or openable with frame, & other similar work etc. fabricated by using the JINDAL/HINDAL CO standard section including necessary arrangements to receive 4mm thick glass or wire mesh with aluminium channel beading & stainless steel screws including the cost of rubber gasket/rubber beading etc. complete including necessary handles, roller wheels, hinges etc complete all as specified and as directed.\nNote :- Weight of aluminium section shall be measured exclusive of all fittings fixtures, hinges, handle, bolts, rubber gasket/rubber beading and locking arrangements. 30 Kg
18 17 S & F sheet glass 4mm thick ordinary quality and glazing with clips exc 0.5 sqm in each pane all as specified and as directed.. 1.2 Sqm
19 18 S&F in repair aluminium wire mesh of size 1.5mm x 3mm mesh 2.0mm thick of make M/s Kiran Netting all as specified and as directed. 30 Sqm
20 19 Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposing off the rubbish outside MD land complete all as specified and as directed. 15.3 Cum
21 20 M&L for 75mm thick cement concrete type, C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection, finish the surface even and smooth all as specified and as directed. 60 Sqm
22 21 Dismantling floor, hearth/wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed. 340 Sqm
23 22 M&L for 40mm thick cement concrete type, B 1 1:2:4 using 20 mm graded stone aggregate as in sub floor all as specified and as directed. 260 Sqm
24 23 M&L for colour ceramic tiles 7 to 8 mm thick square/ rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in cement mortar 1:4 complete all as specified and as directed. 260 Sqm
25 24 M & L for rendering cement plaster 10 mm thick with cement mortar 1:4 to receive tiles on vertical surfaces including finished even and fair complete all as specified and as directed. 65 Sqm
26 25 M & L for glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (coloured tiles) complete all as specified and as directed. 65 Sqm
27 26 M&L for non - skid colour ceramic tiles 7 to 8 mm thick square/ rectangular area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in cement mortar 1:4 complete all as specified and as directed. 15 Sqm
28 27 Demolition of brick work or stone/boulder masonry, built in all quoins, arches, pillars, etc, but excluding ashlar facings, dressed boulder masonry, built in cement mortar complete all as specified and as directed. 6 Cum
29 28 M&L for pre-cast cement concrete block masonry type C1 1:3:6 using 20 mm graded stone aggregate with solid blocks, Grade "C" with compressive strength of 50 Kg/Sqcm conforming to IS -2185 (part - I) exc. 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed. 6 Cum
30 29 M&L for cement concrete type, B1 1:2:4 using 20 mm graded stone aggregate as in coping including necessary form work all as specified and as directed. 0.5 Cum
31 30 M & L for rendering (External wall) in cement mortar 1:4, 15 mm thickness on fair faces of Brick/concrete and finishing the surface even and smooth without using extra cement including mixing with WPC 200ml per bag of cement complete all as specified and directed.\nNote : Water proofing liquid shall be measured and paid separately. 20 Sqm
32 31 M & L for rendering (Internal wall) in cement mortar 1:6, 15 mm thickness other than fair faces of Brick/concrete and finishing the surface even and smooth without using extra cement complete all as specified and as directed. 20 Sqm
33 32 Taking down cement plaster on soffit of RCC slab , etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.. 50 Sqm
34 33 M & L for rendering in cement mortar 1:4, 10 mm thickness on soffit of roof slab finishing the surface even and fair without using extra cement complete all as specified and as directed. 50 Sqm
35 34 Removing loose concrete/plaster upto sound stratum of ceiling chajjas, cloumns and beams and cleaned the surface with water using water jet etc complete all as specified and as directed. 10 Sqm
36 35 M & L for apply one coat of Dr Fixit rust/Deruster/equivalent chemicals as approved to old rested reinforcement after necessary preparation of surfaces by brush application as per manufacturers instructions complete all as specified and as directed. 50 RM
37 36 M&L for priming the old/new steel reinforcement bars with one coat of Fosroc Nito Zinc primer of Dr fixit Epoxy Zinc primer or equivalent as approved by brush applicaton as per manufacture instructions complete all as specified and as directed. 50 RM
38 37 M & L for bonding the exposed surface with one coat of "Monobond SBR of krishna Conchem"/ 'Fosroc' "Nito bond SBR" or equivalent as per manufacturer's instructions complete all as specified and as directed. 10 Sqm
39 38 M & L for polymer modified mortar 20 mm prepacked, single component structural grade morter Pagel U40 (Dr fixit) or Rendroc RG from Fosroc complete all as specified and as directed. 10 Sqm
40 39 Taking down GI tubing 15 mm dia all as specified and as directed. 40 RM
41 40 Supplying and laying of 15 mm dia medium grade GI pipes including fittings on walls/ceiling or laying in floors complete all as specified and as directed. 40 RM
42 41 S & F in repairs vitreous china squatting pan of "Orissa pattern", size 580x440mm white, with integral foot rests, fixed complete all as specified and as directed. 2 Each
43 42 S&F vitreous china wash basin, white, flat back, size 630x450mm excluding but including brackets all as specified and as directed 2 Each
44 43 S & F in repairs PVC valve less, syphonic action type, flushing cistern, 10 litres, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or level, all as specified and as directed. 2 Each
45 44 S & F in repairs bib taps, CP 15mm dia, cast copper alloy, fancy type, with capstan handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed. 4 Each
46 45 S & F in repairs CP stop cock (angle cock), 15mm dia, fancy type with capstan heads screwed both ends for iron pipe or for unions all as specified and as directed. 6 Each
47 46 S & F in repairs pillar Tap CP , 15mm dia, fancy type with capstan heads screwed both ends for iron pipe or for unions all as specified and as directed. 2 Each
48 47 S & F in repairs PVC connections 15 mm size with PTMT nuts of length 450m all as specified and as directed. 4 Each
49 48 S&F shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40gms) complete all as specified and as directed. 1 Each
50 49 S&F swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and as directed. 2 Each
51 50 S & F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, not less than 5.5mm thick mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with SS pins complete all as specified and as directed. 2 Each
52 51 Surface Excavation n.exc 30 cms deep and average 15cms in depth and getting out in soft/disintegrated rock complete all as specified and as directed. 50 Sqm
53 52 Removal of soil exc 500 m but n. exc 1.5 Km and depositing where as directed n exc 1.50 m high from starting point all as specified and as directed. 7.5 Cum
54 53 M & L for hard core, broken to gauge n exc 63 mm for plinth protection/ under floor complete all as specified and as directed. 5 Cum
55 54 M&L for 100mm thick cement concrete type, D2 1:4:8 using 40 mm graded stone aggregate as in sub base of floor all as specified and as directed. 50 Sqm
56 55 M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finish cement mortar 1:4 all as specified and as directed. 50 Sqm
57 56 M&L for Chequered cement concrete tiles 20cm x20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with Grey cement and pigment all as specified and as directed . 50 Sqm
58 57 M&L for providing precast cement concrete 1:2:4 using 20mm graded stone aggregate , solid blocks of size 400x300x100mm for kerb stone (with plain or interlocking joints as directed) set in cement mortar 1:4 all as specified and as directed. 20 Sqm
59 58 Dismantling/Taking down existing bessian base felt or clay tiles or any other water proofing treatment from roof/chajja including cement plaster,cleaning the surface and remove the dismantled debris to a distance exceeding 1.50Km but not exc 5Km to out side the MD land all as specified and as directed. 150 Sqm
60 59 Material and labour for rendering cement plaster 10 mm thick in cement mortar 1:4 on fair faces of brick/concrete faces finished even and fair with WPC @ 200 ml per bag of cement all as specified and as directed.\nNote : Liquid water proofing compound shall be measured and paid separately 150 Sqm
61 60 Supply only Liquid water proofing compound. 8 Ltr
62 61 M & L for water proofing treatment using 4 mm thick APP modified membrane consisting five layer membrane with features as specified weighing not less than 3.5 Kgs per Sqm laid over a coat of cold applied bituminous primer @ 0.4 Liters per sqm on surface provide, a layer of APP modified membrane by torching applications including sealing the overlap while torching with 100 mm on length side and 100 mm wide side as per manufacturer instructions including 10 mm thick plaster in cement mortar 1:4 mixed with SBR latex @ 200 ml/bag of cement curved well at junction of wall & slab before laying of membrane all as per manufacturer instructions and provide a finishing coat with solar reflective bituminous aluminum paint @ 0.1 Kgs per sqm as prescribed by manufacture membrane to the satisfaction of Engineer-in-Charge. \nNotes\n(i) Irrespective of lap the net covered area shall only be measured for payment. \n(ii) The quoted rate is deemed to be inclusive of primer, APP membrane and SBR Latex 150 Sqm
63 62 Dismantling fencing wire mesh,any type all as specified and as directed. 90 Sqm
64 63 Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed natural ground (RCC fencing Posts) all as specified and as directed. 80 RM
65 64 Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & ramming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/disintegrated rock all as specified and as directed. 24 Each
66 65 M&L for cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in post hole,foundations,filling and mass concrete all as specified and as directed. 1.2 Cum
67 66 M&L for kota stone slab 20-25 mm thick in stair case, landing riser of steps, skirting, dado and ( Single Piece) laid over 20mm thick cement screed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. 12 Sqm
68 67 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and as directed. 20 RM
69 68 S & F mild steel work like angle iron, flat iron etc in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc including all necessary drilling conforming to Fe 290 Gde E-165 all as specified and as directed. 420 Kg
70 69 S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square length of bolt exc 5cm and n exc 10cm long and 12mm dia complete all as specified and as directed. 10 Kg
71 70 M&L for mild steel bars 10mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 120 Kg
72 71 Supply and fix PVC coated MS galvanised chain link fencing any size or type of standard, rails straining bolts etc including provisioning of binding wire all as specified and as directed. 240 Kg
73 72 M & L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of surfaces exc 10 cm width or girth all as specified and as directed. 20 Sqm
74 73 M&L for applying two coats of synthetic enamel paint over old treated steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces all as specified and as directed. 20 Sqm
75 74 M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10 cm in width or girth not otherwise described including preparation of surfaces all as specified and as directed. 16 Sqm
76 75 M&L for applying two coats of arcylic emulsion exterior paint (antifungal paint APEX) over a coat of primer including preparation of old treated(Complete removal including necessary wall putty for level the damaged surface at the time of removal) surfaces of walls complete, all as per manufactures instructions all as specified and as directed. 320 Sqm
77 76 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4 including even and smooth without using extra cement all as specified and as directed. 150 Sqm
78 77 M&L for appling two coats of arcylic emulsion exterior paint (antifungal paint) over a coat of primer including preparation of on newly plastered surfaces of walls complete, all as per manufactures instructions all as specified and as directed. 150 Sqm
79 78 M & L for three coats of white wash on newly plastered celing surfaces complete including preparation of surface all as specified and as directed 50 Sqm
80 79 M & L for two coats of white wash on old decorated celing surfaces including preparation of surface complete all as specified and as directed. 220 Sqm
81 80 M & L for two coats of oil bound distemper on old wall surfaces including preparation of old decorated surfaces complete all as specified and as directed. 460 Sqm
82 81 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6 including even and smooth without using extra cement all as specified and as directed. 100 Sqm
83 82 M & L for two coats of oil bound distemper over a coat of primer including preparation of newly plastered surfaces of walls complete all as per manufactures instructions all as specified and as directed. 100 Sqm
84 83 Taking down broken rain water pipe and Supply and fixing in wall 110mm PVC SWR pipe fix with 40 x5mm FI bracket @ 1.2m C/C all as specified and as directed.\nNote : FI Bracket shall be measured and paid separately 20 RM
85 84 S&F Flat Iron purpose made Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay)all as specified and as directed. 10 Kg
86 85 Removing building material/debris to a distance of 1.5 to 5 Km and spreading in layers all as specified and as directed. \nNote :6.0 Cum shall be consider as one load. 10 Per load
87 85.1 Schedule 'A' : Part II E/M works
88 86 Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete (fittings such as switches, ceiling roses pendants, regulators, sockets etc to be measured separately) and making good disturbed surface of wall, floors etc all as specified and as directed. 151 Per \npoint
89 87 Material and labour for point wiring FRLS complete with 1100 V grade 1.5 Sqmm single core PVC insulated unsheathed multistranded copper conductor cable drawn through in and including non metalic rigid Concealed conduit of dia 20mm ISI marked with all accessories concealed in wall, ceiling including 1.5 sqmm single core PVC insulated and unsheathed copper conductor cable as earth continuity wire including testing all as specified and as directed for one light point, fan point, exhaust fan point controlled by one switch. 115 Per point
90 88 All as per SI item No 87 here-in-before, but one 5 pin switch socket outlet 5 Amps on independent board controlled by one switch all as specified and as directed. 27 Per point
91 89 All as per item No 87 here in before, but one 6 pin socket outlet 15 Amps independent socket with cables 4 sqmm size copper PVC insulated cable multistranded and 4 sqmm cable conductor for earth wire all as specified and as directed. 9 Per point
92 90 Supply and fix modular switch one way 6 Amp, 1 module all as specified and as directed. 142 Each
93 91 Supply and fix modular switch one way 16 Amp 1 module all as specified and as directed. 9 Each
94 92 Supply and fix modular socket, 6 A -2/3 pin combined 2 module all as specified and as directed. 27 Each
95 93 Supply and fix modular socket, 15 A -2/3 pin combined 2 module all as specified and as directed. 9 Each
96 94 Supply and fix modular white cover plate with frame, 3 module all as specified and as directed. 40 Each
97 95 Supply and fix modular white cover plate with frame, 4 module all as specified and as directed. 10 Each
98 96 Supply and fix modular white cover plate with frame, 6 module all as specified and as directed. 10 Each
99 97 Supply and fix modular metal flush box 3 module all as specified and as directed. 40 Each
100 98 Supply & fixing modular metal flush box 4 module all as specified and as directed. 10 Each
101 99 Supply & fixing modular metal flush box 6 module all as specified and as directed. 10 Each
102 100 Supply and fix MCB, single pole, 6-32 Amps, 240 Volts, 'C' Curve 10KA all as specified and as directed. 24 Each
103 101 Supply and fix MCB, single pole and neutral, 6-32 Amps, 240 Volts, 'C' Curve 10KA all as specified and as directed. 1 Each
104 102 Supply and fix MCB, Triple pole and neutral, 63 Amps, 415 Volts, 'C' series 10 KA all as specified and as directed. 1 Each
105 103 Supply and fix sheet metal enclosure (DB) for MCB's, 8 way, single pole and neutral, 240 volts, double door with 100 Amps rated bus bar complete all as specified and as directed. 1 Each
106 104 Supply and fix sheet metal enclosure (DB) for MCBs, 4 way, triple pole and neutral, 415 Volts, double door with 200 Amps rated bus bar complete all as specified and as directed. 1 Each
107 105 Supply and fixing ceiling rose, 3 phase/PVC/ polycarbonate, isolated body all as specified and as directed. 115 Each
108 106 Supply and fixing LED Tube light fitting surface mounted with 24 watts LED having lumen efficiency of 100 lumen/watt made up of aluminium housing including dismantling of old fittings all as specified and as directed. 62 Each
109 107 M&L for Submain wiring with 4 sqmm 2 Runs of single core multi stranded FRLS PVC in related unsheathed cable 1100 Volts with copper conductor drawn in and including non metalic rigid concealed conduit of dia 20mm ISI marked with all accessories such as tees, elbows, junction box Reducers etc as required along with 1 Run of 4 sqmm single core PVC insulated unsheathed copper conductor as continuous earth wire and connecting to existing main switch board \ Distribution Board and testing on completion including taking down old submain wiring complete all as specified and as directed.\nNote : 2 run of main conductor and one run of earth conductor and one run of 20 mm dia conduit shall be measured as one length. 50 RM
110 108 M&L for earthing complete with copper plate earth plate electrode 60 cm x 60 cm x 3.15 mm thick buried directly in ground vertically to a depth not less than 2.25 m below ground level with top connected to Copper wire of 10sqmm by means of bolts, nuts, check nuts and washers of brass and earth lead connected to main DB panel /meter box panel with including necessary and earth work and excavation including PCC chamber 1:3:6 and RCC cover all as specified and or shown in electric plate No 3 of SSR-1 directly by Engineer-in-Charge. 2 Each
111 109 S&F Exhaust fan 300mm sweep, metal body AC single phase 240V with base frame, louvers etc fixed including opening of wall hole for fixing of exhaust fan, by providing necessary nuts, bolts, washers etc complete all as specified and as directed. 11 Each
112 110 Supply and fixing stepped type modular fan regulator, 120W, 2 Module etc including removal of old all as specified and as directed. 15 Each
113 111 Taking down and refixing ceiling/Wall mounted fan of any sweep complete including provision of cable from ceiling rose or connector to fan all as specified and as directed. 15 Each
114 112 M&L for painting of ceiling/Wall mounted fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc all as specified and as directed. 20 Each
115 113 Supply & fixing LED street light fitting of 30 Watts Powder coated pressure die cast aluminium High Power LED as light source with heat resistant toughened glass with lens having IP66 protection, taking down the old one complete all as specified and as directed. 7 Each
116 114 Supply & installed storage type water heater (Geyser) capacity 25 Ltrs five star rating GMV type prefixing and grouting work for mounting nuts, bolts and washer etc in wall and connecting new inlet/outlet pipes electrical/earthing connections and carrying out testing for proper functioning including dismantling of old geyser and deposited in MES store yard all as specified and as directed. \nMake : Havells/Bajaj or equivalent as approved by GE 2 Each
117 115 Supply and fix sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with and including one single pole MCB 20 Amps, 240 Volts complete all as specified and as directed. 2 Each
118 116 Supply and lay cable XLPE insulated armored (heavy duty) electric power cables 1100 volts grade with aluminium conductor of size 50 sqmm 4 core all as specified and as directed. 200 RM
119 117 Supply and lay cable XLPE insulated armored (heavy duty) electric power cables 1100 volts grade with aluminium conductor of size 16 sqmm 2 core all as specified and as directed. 25 RM
120 118 Supply and lay High density poly-ethylene pipes ( HDPE) of pressure rating 6kgf/sqcm fixed complete for road crossing of size 40mm bore all as specified and as directed. 12 RM
121 119 Excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in hard/dense soil all as specified and as directed. 24.75 Cum
122 120 Excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out soft disintegrated rock all as specified and as directed. 41.4 Cum
123 121 M&L for fine river sand in trenches for cable protection complete all as specified and as directed. 14.99 Cum
124 122 Supply and lay PCC cable cover class LV type 1 flat size 250mmx150mmx40mm all as specified and as directed. 1233 Each
125 123 Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm in thick using excavated materials all as specified and as directed. 44.34 Cum
126 124 Removal of surplus excavated materials to a distance not exceeding 50 m and depositing where directed all as specified and as directed. 21.81 Cum
127 125 Supply and laying of 25mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fitting in trenches complete all as specified and as directed. 100 RM
128 126 Supply and fixing Gun metal Globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed in 25mm dia pipe all as specified and as directed. 2 Each
129 127 Supply & fix in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of dia 25mm and fixed all as specified and as directed. 2 Each
130 128 S&F male brass threaded adaptor 25mm size all as specified and as directed. 2 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail