Assam State Housing Board has published Construction And Renovation Works Of Khagarijan College , Nagaon. Submission Date for this Tender is 06-02-2020. Building Work Tenders in Khagarijan College, Chotahaibor, Nagaon Assam. Bidders can get complete Tender details and download the document.
| Name of Work: Construction and Renovation works of Khagarijan College, Nagaon | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Construction of Classroom Block of KHAGARIJAN COLLEGE, NAGAON | Anx-A_1 | ||
| 2 | 2 | FIRST FLOOR | Anx-A_2 | ||
| 3 | 3 | Providing and laying plain/reinforced cement concrete work with coarse sand & 20 mm down graded stone aggregate including dewatering if necessary and curing complete supply of materials but excluding cost of form work and reinfircement for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately ) | Anx-A_3 | ||
| 4 | 4 | (I) Using mixture machine | Anx-A_4 | ||
| 5 | 5 | ii) Columns, pillars, posts, struts, suspanded floor, roof, landing, shelf and support, balcony, lintel,sill band , beam, girder, cantilever,staircase (except spiral staircase and landing) including preparing of top surface and finishing of nosing. | Anx-A_5 | ||
| 6 | 6 | N) Without using admixture, plasticiser | Anx-A_6 | ||
| 7 | 7 | b) M 20 grade concrete or Prop 1:1.5:3 | Anx-A_7 | 147.14 | Cum |
| 8 | 8 | BRICK WORK | Anx-A_8 | ||
| 9 | 9 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in in super structure above plinth upto first floor level (protruding M.S. rod / Tor steel of column to be embeded in cement morter and will be measured and paid separately) | Anx-A_9 | ||
| 10 | 10 | (A) 112 mm thick brick wall | Anx-A_10 | ||
| 11 | 11 | a) In cement morter in proportion 1:4( 1 cement :4 sand) | Anx-A_11 | 315.59 | Sqm |
| 12 | 12 | SHUTTERING AND FORM WORK | Anx-A_12 | ||
| 13 | 13 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. hight of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for insitu reinforced cement concrete and plain concrete work in | Anx-A_13 | ||
| 14 | 14 | Columns, Pillars , Posts & Strut | Anx-A_14 | ||
| 15 | 15 | a) Square, Rectangular, polygonal in plan or any shape like Tee/ L etc having plane vertical face. | Anx-A_15 | ||
| 16 | 16 | I) Using 38 mm thick plank | Anx-A_16 | 247.67 | Sqm |
| 17 | 17 | Sides and soffits of beams, beam haunching, cantilever girders, bressumers, lintels and horizontal ties | Anx-A_17 | ||
| 18 | 18 | a) For depth not exceeding 1.0M | Anx-A_18 | ||
| 19 | 19 | I) Using 38 mm thick plank | Anx-A_19 | 480.95 | Sqm |
| 20 | 20 | iii) Flat surface such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas balconies and the like. | Anx-A_20 | ||
| 21 | 21 | a) Floors etc. upto 200 mm in thickness | Anx-A_21 | ||
| 22 | 22 | I) Using 38 mm thick plank | Anx-A_22 | 618.95 | Sqm |
| 23 | 23 | Staircase with sloping or stepped soffits including risers and stringers but excluding landing. | Anx-A_23 | 12.64 | Sqm |
| 24 | 24 | Providing form work of 12 mm thick plywood board and removal of the same in edges of slabs and breaks in floors and walls etc. of in -situ reinforced concrete works upto 1st floor level. | Anx-A_24 | ||
| 25 | 25 | a) Thickness not exceeding 200mm | Anx-A_25 | 20.64 | Sqm |
| 26 | 26 | PLASTERING AND POINTING | Anx-A_26 | ||
| 27 | 27 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_27 | ||
| 28 | 28 | A) On rough side | Anx-A_28 | ||
| 29 | 29 | b) In cement mortar 1:4 | Anx-A_29 | 315.59 | Sqm |
| 30 | 30 | (a) On Single coat plaster | Anx-A_30 | ||
| 31 | 31 | B) On fair side | Anx-A_31 | ||
| 32 | 32 | b) In cement mortar 1:4 | Anx-A_32 | 926.56 | Sqm |
| 33 | 33 | Extra over item on 6.2.1 to 6.2.3 for interior plastering above 1st floor level for every addl floor or part there of including curing complete as directed. | Anx-A_33 | ||
| 34 | 34 | (a) On Single coat plaster | Anx-A_34 | 926.56 | Sqm |
| 35 | 35 | Extra for plastering on celling and soffits of stair up to 1st floor level (instead of plastering on walls) including curing complete as directed. | Anx-A_35 | 610.97 | Sqm |
| 36 | 36 | FLOORING, PAVING AND ROOFING : | Anx-A_36 | ||
| 37 | 37 | 40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including curing etc. complete as directed. | Anx-A_37 | 544.1 | Sqm |
| 38 | 38 | Cement plaster skirting with cement mortar ( 1 cement : 3 coarse sand ) finished with a floating coat of neat cement including rounding of juctions with floor. | Anx-A_38 | ||
| 39 | 39 | b) 20 mm thick . | Anx-A_39 | 55.04 | Sqm |
| 40 | 40 | Providing ceramic tiles of approved quality size, shape and thickness not less than 8 mm on floors, skirtings treads and risers of steps over cement mortar bed 10mm thick in prop 1:3 including cutting where necessary finished with flush pointing with Fix -A- Tiles (Choksey/ Sika/ Pedilite/Rouf )/ White cement slurry mixed with approved pigment to match shade of granite slab complete at all levels as specified and directed. | Anx-A_40 | ||
| 41 | 41 | a) Normal range (Somany/ Orient/Nitco /Asian Make) | Anx-A_41 | ||
| 42 | 42 | i) Of Sizes 300mm x300mm and above) | Anx-A_42 | ||
| 43 | 43 | a) Deluxe range (Somany/ Orient/Nitco /Qutone Make) | Anx-A_43 | 10.04 | Sqm |
| 44 | 44 | Providing polished ceramic wall tiles of approved quality size, shape and thickness not less than 8 mm on walls and skirtings over cement mortar bed 10mm thick in prop 1:3 including cutting where necessary finished with flush pointing with Fix -A- Tiles (Choksey/ Sika/ Pedilite/Rouf )/ White cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. | Anx-A_44 | ||
| 45 | 45 | a) Normal range (Somany/ Orient/Nitco /Asian Make) | Anx-A_45 | ||
| 46 | 46 | i) Of size 200mmx300mm and above | Anx-A_46 | 43.1 | Sqm |
| 47 | 47 | WOOD WORK | Anx-A_47 | ||
| 48 | 48 | Providing wood work in frames (chowkat) of doors, windows, clearstory windows and other similar works wrought, framed and fixed in position in contact with C.C. or brick masonry walls including supplying, fitting and fixing with nails, screws, bolts and nuts complete with M.S. plate hold fasts (4mm X 3mm X 250mm) as per design and embeded in cement concrete block in prop. 1:1:4 and with 2 coats of kiricide oiling to the timber faces in contact with C.C. and masonry as directed and specified. | Anx-A_48 | ||
| 49 | 49 | (b) With 1st class timber (Bonsum/ Sundi) | Anx-A_49 | 4.9 | Cum |
| 50 | 50 | Providing and fixing flush door shutters solid core construction with frame of first class hard wood with cross bend and face veneered plywood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100X75X3.5mm) 6 nos. with necessary wood screws. | Anx-A_50 | ||
| 51 | 51 | a) Decorative type face panel and block board core . | Anx-A_51 | ||
| 52 | 52 | I) 40 mm thick | Anx-A_52 | 1.31 | Sqm |
| 53 | 53 | Providing, fitting and fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns / stiffeners / walls with necessary holdfast / sleeves etc. as specified and directed at all levels. | Anx-A_53 | 4.9 | Rm |
| 54 | 54 | Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately) | Anx-A_54 | 1.47 | Sqm |
| 55 | 55 | Providing fitting and fixing 1/3 panelled 2/3 glazed wooden shutters for doors/windows including oxidised iron butt hinges (100mm x75 mm x3.55 mm) with necessay screws including glass panes (other fittings to be measured and paid separately) | Anx-A_55 | ||
| 56 | 56 | C) With 1st class Local wood ( Bola wood) | Anx-A_56 | 3.58 | Sqm |
| 57 | 57 | STEEL AND IRON WORK | Anx-A_57 | ||
| 58 | 58 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for RCC work / RB walling including straightening, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete ( upto first floor level ). | Anx-A_58 | ||
| 59 | 59 | a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL | Anx-A_59 | ||
| 60 | 60 | (ii)Super Ductile (SD) TMT reinforcement bars | Anx-A_60 | 164.13 | Qntl |
| 61 | 61 | Applying primary coat over new steel and other metal surfaces upto 100 mm in width or grith after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wood scrappers and sand paper. | Anx-A_61 | 685.125 | Sqm |
| 62 | 62 | a) With ready mixed red lead red oxide primer | Anx-A_62 | ||
| 63 | 63 | Painting two coats ( excluding priming coat ) on new steel and other metal surfaces with enamel paint of approved brand and manufacture( Asian paint/Berger paint/ICI paint/ J &Npaint/Nerolac to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. | Anx-A_63 | ||
| 64 | 64 | (I) Surfaces over 100 mm in width or girth | Anx-A_64 | 685.13 | Sqm |
| 65 | 65 | b) High gloss ( Asian paint/ Berger paint/ ICI paint / J& N paint / Nerolac) | Anx-A_65 | ||
| 66 | 66 | Applying priming coat over new wood based surfaces over 10 cm in width/grith after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. | Anx-A_66 | ||
| 67 | 67 | a) With ready mixed paint, wood primer ( white). | Anx-A_67 | 172.78 | Sqm |
| 68 | 68 | Painting two coats ( excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of ditrt, dust and other foreign material , sand papering and stopping | Anx-A_68 | ||
| 69 | 69 | (I) Surfaces over 100 mm in width or girth | Anx-A_69 | ||
| 70 | 70 | b) High gloss (Asian Paint/ Berger Paint /ICI paint/Nerolac | Anx-A_70 | 172.78 | Sqm |
| 71 | 71 | Providing two coats of acrylic water based wall putty/ wall filter of Asian Paints/ Berger/Dulux (ICI)/ Nerolac over concrete/cement plaster/ brick walls ( internal )and after removing all the loosely adhering material from the wall/ceiling surface with the help of emerey stone ,putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. | Anx-A_71 | 1008.32 | Sqm |
| 72 | 72 | Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar drops and other foreign matter and including preparing the surface even and sand papered smooth. | Anx-A_72 | 1008.32 | Sqm |
| 73 | 73 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. | Anx-A_73 | ||
| 74 | 74 | (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | Anx-A_74 | 1008.32 | Sqm |
| 75 | 75 | Providing one coat of cement primer( on ext. wall) of approved brand and manufacture on new surfaces after thoroughly brooming the surface preparing the surface even and sand papered smooth. | Anx-A_75 | 397.35 | Sqm |
| 76 | 76 | Finishing old /new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish , finish of Sandex Matt brand of Snowcem India Ltd. Of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels ( two coats) | Anx-A_76 | 397.35 | Sqm |
| 77 | 77 | HARDWARE FITTINGS | Anx-A_77 | ||
| 78 | 78 | Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ). | Anx-A_78 | ||
| 79 | 79 | b) Tower bolt | Anx-A_79 | ||
| 80 | 80 | I) 300 X 10 mm | Anx-A_80 | 54 | Each |
| 81 | 81 | ii) 150 X 10 mm | Anx-A_81 | 49 | Each |
| 82 | 82 | c) Door handle | Anx-A_82 | ||
| 83 | 83 | I) 100 mm | Anx-A_83 | 54 | Each |
| 84 | 84 | ii) 75 mm | Anx-A_84 | 49 | Each |
| 85 | 85 | e) Butt hinge v) 100 mm x50mmx 2.5mm | Anx-A_85 | 103 | Pair |
| 86 | 86 | SECOND FLOOR | Anx-A_86 | ||
| 87 | 87 | Providing and laying plain/reinforced cement concrete work with coarse sand & 20 mm down graded stone aggregate including dewatering if necessary and curing complete supply of materials but excluding cost of form work and reinfircement for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately ) | Anx-A_87 | ||
| 88 | 88 | (I) Using mixture machine | Anx-A_88 | ||
| 89 | 89 | ii ) Columns, pillars, posts, struts, suspanded floor, roof, landing, shelf and support, balcony, lintel,sill band , beam, girder, cantilever,staircase (except spiral staircase and landing) including preparing of top surface and finishing of nosing. | Anx-A_89 | ||
| 90 | 90 | N) Without using admixture, plasticiser | Anx-A_90 | ||
| 91 | 91 | b) M 20 grade concrete or Prop 1:1.5:3 | Anx-A_91 | 154.52 | CU.M. |
| 92 | 92 | Extra over item Nos.2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level. | Anx-A_92 | 154.52 | CU.M. |
| 93 | 93 | BRICKWORK | Anx-A_93 | ||
| 94 | 94 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in in super structure above plinth upto first floor level (protruding M.S. rod / Tor steel of column to be embeded in cement morter and will be measured and paid separately) | Anx-A_94 | ||
| 95 | 95 | (A) 112 mm thick brick wall | Anx-A_95 | ||
| 96 | 96 | a) In cement morter in proportion 1:4( 1 cement :4 sand) | Anx-A_96 | 365.57 | SQ.M. |
| 97 | 97 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level. | Anx-A_97 | 365.57 | SQ.M. |
| 98 | 98 | SHUTTERING AND FORMWORK | Anx-A_98 | ||
| 99 | 99 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. hight of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for insitu reinforced cement concrete and plain concrete work in | Anx-A_99 | ||
| 100 | 100 | Columns, Pillars , Posts & Strut | Anx-A_100 | ||
| 101 | 101 | a) Square, Rectangular, polygonal in plan or any shape like Tee/ L etc having plane vertical face. | Anx-A_101 | ||
| 102 | 102 | I) Using 38 mm thick plank | Anx-A_102 | 249.77 | SQ.M. |
| 103 | 103 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no.3.2.1 & 3.2.3(b). | Anx-A_103 | 249.77 | SQ.M. |
| 104 | 104 | Sides and soffits of beams, beam haunching, cantilever girders, bressumers, lintels and horizontal ties | Anx-A_104 | ||
| 105 | 105 | a) For depth not exceeding 1.0M | Anx-A_105 | ||
| 106 | 106 | I) Using 38 mm thick plank | Anx-A_106 | 500.58 | SQ.M. |
| 107 | 107 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no.3.2.1 & 3.2.3(b). | Anx-A_107 | 500.58 | SQ.M. |
| 108 | 108 | iii) Flat surface such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas balconies and the like. | Anx-A_108 | ||
| 109 | 109 | a) Floors etc. upto 200 mm in thickness | Anx-A_109 | ||
| 110 | 110 | I) Using 38 mm thick plank | Anx-A_110 | 662.6 | SQ.M. |
| 111 | 111 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no.3.2.1 & 3.2.3(b). | Anx-A_111 | 662.6 | SQ.M. |
| 112 | 112 | Staircase with sloping or stepped soffits including risers and stringers but excluding landing. | Anx-A_112 | 12.64 | SQ.M. |
| 113 | 113 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no.3.2.1 & 3.2.3(b). | Anx-A_113 | 12.64 | SQ.M. |
| 114 | 114 | Providing form work of 12 mm thick plywood board and removal of the same in edges of slabs and breaks in floors and walls etc. of in -situ reinforced concrete works upto 1st floor level. | Anx-A_114 | ||
| 115 | 115 | a) Thickness not exceeding 200mm | Anx-A_115 | 135.6 | SQ.M. |
| 116 | 116 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no.3.2.1 & 3.2.3(b). | Anx-A_116 | 135.6 | SQ.M. |
| 117 | 117 | PLASTERING AND POINTING | Anx-A_117 | ||
| 118 | 118 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_118 | ||
| 119 | 119 | A) On rough side | Anx-A_119 | ||
| 120 | 120 | b) In cement mortar 1:4 | Anx-A_120 | 365.57 | SQ.M. |
| 121 | 121 | Extra over item on 6.2.1 to 6.2.3 for interior plastering above 1st floor level for every addl floor or part there of including curing complete as directed. | Anx-A_121 | 365.57 | SQ.M. |
| 122 | 122 | (a) On Single coat plaster | Anx-A_122 | ||
| 123 | 123 | B) On fair side | Anx-A_123 | ||
| 124 | 124 | b) In cement mortar 1:4 | Anx-A_124 | 1020.19 | SQ.M. |
| 125 | 125 | Extra over item on 6.2.1 to 6.2.3 for interior plastering above 1st floor level for every addl floor or part there of including curing complete as directed. | Anx-A_125 | ||
| 126 | 126 | (a) On Single coat plaster | Anx-A_126 | 1020.19 | SQ.M. |
| 127 | 127 | Extra for plastering on celling and soffits of stair up to 1st floor level (instead of plastering on walls) including curing complete as directed. | Anx-A_127 | 654.62 | SQ.M. |
| 128 | 128 | FLOORING, PAVING AND ROOFING | Anx-A_128 | ||
| 129 | 129 | 40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including curing etc. complete as directed. | Anx-A_129 | 544.1 | SQ.M. |
| 130 | 130 | Cement plaster skirting with cement mortar ( 1 cement : 3 coarse sand ) finished with a floating coat of neat cement including rounding of juctions with floor. | Anx-A_130 | ||
| 131 | 131 | b) 20 mm thick . | Anx-A_131 | 55.04 | SQ.M. |
| 132 | 132 | Providing ceramic tiles of approved quality size, shape and thickness not less than 8 mm on floors , skirtings treads and risers of steps over cement mortar bed 10mm thick in prop 1:3 including cutting where necessary finished with flush pointing with Fix -A- Tiles (Choksey/ Sika/ Pidilite/ Rouf )/ White cement slurry mixed with approved pigment to match shade of granite slab complete at all levels as specified and directed | Anx-A_132 | ||
| 133 | 133 | a) Normal range (Somany/ Orient/Nitco /Asian Make) | Anx-A_133 | ||
| 134 | 134 | i) Of Sizes 300mm x300mm and above) | Anx-A_134 | ||
| 135 | 135 | a) Deluxe range (Somany/ Orient/Nitco /Qutone Make) | Anx-A_135 | 10.04 | SQ.M. |
| 136 | 136 | Providing polished ceramic wall tiles of approved quality size, shape and thickness not less than 8 mm on walls and skirtings over cement mortar bed 10mm thick in prop 1:3 including cutting where necessary finished with flush pointing with Fix -A- Tiles (Choksey/ Sika/ Pedilite/Rouf )/ White cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed | Anx-A_136 | ||
| 137 | 137 | a) Normal range (Somany/ Orient/Nitco /Asian Make) | Anx-A_137 | ||
| 138 | 138 | i) Of size 200mmx300mm and above | Anx-A_138 | 43.1 | SQ.M. |
| 139 | 139 | WOOD WORK | Anx-A_139 | ||
| 140 | 140 | Providing wood work in frames (chowkat) of doors, windows, clearstory windows and other similar works wrought, framed and fixed in position in contact with C.C. or brick masonry walls including supplying, fitting and fixing with nails, screws, bolts and nuts complete with M.S. plate hold fasts (4mm X 3mm X 250mm) as per design and embeded in cement concrete block in prop. 1:1:4 and with 2 coats of kiricide oiling to the timber faces in contact with C.C. and masonry as directed and specified. | Anx-A_140 | ||
| 141 | 141 | a) With sal wood | Anx-A_141 | 4.9 | CUM |
| 142 | 142 | Providing and fixing flush door shutters solid core construction with frame of first class hard wood with cross bend and face veneered plywood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100X75X3.5mm) 6 nos. with necessary wood screws. | Anx-A_142 | ||
| 143 | 143 | a) Decorative type face panel and block board core . | Anx-A_143 | ||
| 144 | 144 | I) 40 mm thick | Anx-A_144 | 1.31 | SQ.M. |
| 145 | 145 | Providing, fitting and fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns / stiffeners / walls with necessary holdfast / sleeves etc. as specified and directed at all levels. | Anx-A_145 | 4.9 | Rm |
| 146 | 146 | Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately) | Anx-A_146 | 1.47 | SQM |
| 147 | 147 | Providing fitting and fixing 1/3 panelled 2/3 glazed wooden shutters for doors/windows including oxidised iron butt hinges (100mm x75 mm x3.55 mm) with necessay screws including glass panes (other fittings to be measured and paid separately) | Anx-A_147 | ||
| 148 | 148 | C) With 1st class Local wood ( Bola wood) | Anx-A_148 | 3.58 | SQM |
| 149 | 149 | STEEL AND IRON WORK | Anx-A_149 | ||
| 150 | 150 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for RCC work / RB walling including straightening, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete ( upto first floor level ). | Anx-A_150 | ||
| 151 | 151 | a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL | Anx-A_151 | ||
| 152 | 152 | (ii)Super Ductile (SD) TMT reinforcement bars | Anx-A_152 | 174 | QNTL |
| 153 | 153 | Extra over item 18.1.1(a,b,c) for each subequent floor or part thereof above first floor level. | Anx-A_153 | 174 | QNTL |
| 154 | 154 | Applying primary coat over new steel and other metal surfaces upto 100 mm in width or grith after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wood scrappers and sand paper. | Anx-A_154 | 685.13 | SQ.M. |
| 155 | 155 | a) With ready mixed red lead red oxide primer | Anx-A_155 | ||
| 156 | 156 | Painting two coats ( excluding priming coat ) on new steel and other metal surfaces with enamel paint of approved brand and manufacture( Asian paint/Berger paint/ICI paint/ J &Npaint/Nerolac to give an even shade including cleaning the surface of all dirt, dust and other foreign matter . | Anx-A_156 | ||
| 157 | 157 | (I) Surfaces over 100 mm in width or girth | Anx-A_157 | 685.13 | SQ.M. |
| 158 | 158 | b) High gloss ( Asian paint/ Berger paint/ ICI paint / J& N paint / Nerolac) | Anx-A_158 | ||
| 159 | 159 | Applying priming coat over new wood based surfaces over 10 cm in width/grith after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. | Anx-A_159 | ||
| 160 | 160 | a) With ready mixed paint, wood primer ( white). | Anx-A_160 | 172.78 | SQ.M. |
| 161 | 161 | Painting two coats ( excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of ditrt, dust and other foreign material , sand papering and stopping | Anx-A_161 | ||
| 162 | 162 | (I) Surfaces over 100 mm in width or girth | Anx-A_162 | ||
| 163 | 163 | b) High gloss (Asian Paint/ Berger Paint /ICI paint/Nerolac | Anx-A_163 | 172.78 | SQ.M. |
| 164 | 164 | Providing two coats of acrylic water based wall putty/ wall filter of Asian Paints/ Berger/Dulux (ICI)/ Nerolac over concrete/cement plaster/ brick walls ( internal )and after removing all the loosely adhering material from the wall/ceiling surface with the help of emerey stone ,putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. | Anx-A_164 | 1008.32 | SQ.M. |
| 165 | 165 | Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar drops and other foreign matter and including preparing the surface even and sand papered smooth. | Anx-A_165 | 1008.32 | SQ.M. |
| 166 | 166 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. | Anx-A_166 | ||
| 167 | 167 | (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | Anx-A_167 | 1008.32 | SQ.M. |
| 168 | 168 | Providing one coat of cement primer( on ext. wall) of approved brand and manufacture on new surfaces after thoroughly brooming the surface preparing the surface even and sand papered smooth. | Anx-A_168 | 397.35 | SQ.M. |
| 169 | 169 | Finishing old /new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish , finish of Sandex Matt brand of Snowcem India Ltd. Of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels ( two coats) | Anx-A_169 | 397.35 | SQ.M. |
| 170 | 170 | HARDWARE FITTINGS | Anx-A_170 | ||
| 171 | 171 | Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ). | Anx-A_171 | ||
| 172 | 172 | b) Tower bolt | Anx-A_172 | ||
| 173 | 173 | I) 300 X 10 mm | Anx-A_173 | 54 | EACH |
| 174 | 174 | ii) 150 X 10 mm | Anx-A_174 | 49 | EACH |
| 175 | 175 | c) Door handle | Anx-A_175 | ||
| 176 | 176 | I) 100 mm | Anx-A_176 | 54 | EACH |
| 177 | 177 | ii) 75 mm | Anx-A_177 | 49 | EACH |
| 178 | 178 | e) Butt hinge v) 100 mm x50mmx 2.5mm | Anx-A_178 | 103 | pair |
| 179 | 179 | Sanitary & Internal Water supply works | Anx-A_179 | ||
| 180 | 180 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets, 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) | Anx-A_180 | ||
| 181 | 181 | A) Parryware make | Anx-A_181 | ||
| 182 | 182 | b) White | Anx-A_182 | ||
| 183 | 183 | (vii) Niagara (Cat No.C0252) (inclusive of seat cover) | Anx-A_183 | 2 | Each |
| 184 | 184 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. | Anx-A_184 | ||
| 185 | 185 | (A) Parryware Make | Anx-A_185 | ||
| 186 | 186 | (a) White | Anx-A_186 | ||
| 187 | 187 | (iv) Flat Back (Cat. No.C0501/72) | Anx-A_187 | 6 | Each |
| 188 | 188 | Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. | Anx-A_188 | ||
| 189 | 189 | (A) Parryware Make | Anx-A_189 | ||
| 190 | 190 | (a) White( Cat No. C0503) | Anx-A_190 | 6 | Each |
| 191 | 191 | Supplying, fiting and fixing automatic flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) | Anx-A_191 | ||
| 192 | 192 | (ii) Hindware Make | Anx-A_192 | ||
| 193 | 193 | (a) White | Anx-A_193 | ||
| 194 | 194 | (I) Sleek+ PVC Cistern | Anx-A_194 | 6 | Each |
| 195 | 195 | Under Counter Basin | Anx-A_195 | ||
| 196 | 196 | (B) Hindware Make | Anx-A_196 | ||
| 197 | 197 | (a) White | Anx-A_197 | ||
| 198 | 198 | (iii) Corner 450x390( Cat No. 10031) | Anx-A_198 | 6 | Each |
| 199 | 199 | Providing fitting and fixing Mirror with plastic frame of size 500x 400 mm complete as directed and specified . | Anx-A_199 | 6 | Each |
| 200 | 200 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. | Anx-A_200 | ||
| 201 | 201 | (A) Parryware Make | Anx-A_201 | ||
| 202 | 202 | (ii) Wall Soap tray (Cat. No.C9951) | Anx-A_202 | 6 | Each |
| 203 | 203 | Providing, fitting and fixing CP towel ring complete as directed and specified. | Anx-A_203 | ||
| 204 | 204 | (a) Sona make | Anx-A_204 | ||
| 205 | 205 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. | Anx-A_205 | ||
| 206 | 206 | a) In exposed surfaces or in trenches. | Anx-A_206 | ||
| 207 | 207 | (ii) 110mm dia | Anx-A_207 | 38 | Rm |
| 208 | 208 | b) Concealed by chiselling or breaking brick wall/ C.C./ R.C.C and making good to the damages. | Anx-A_208 | ||
| 209 | 209 | (ii) 110mm dia | Anx-A_209 | 2 | Rm |
| 210 | 210 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. | Anx-A_210 | ||
| 211 | 211 | a) In exposed surfaces or in trenches | Anx-A_211 | ||
| 212 | 212 | ii) 110 mm dia. | Anx-A_212 | 10 | Each |
| 213 | 213 | b) Concealed by chiselling or breaking brick wall/ C.C./ R.C.C and making good to the damages. | Anx-A_213 | ||
| 214 | 214 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | Anx-A_214 | ||
| 215 | 215 | a) In exposed surfaces or in trenches | Anx-A_215 | ||
| 216 | 216 | ii) 110 mm dia. | Anx-A_216 | 10 | Each |
| 217 | 217 | b) Concealed by chiselling or breaking brick wall / CC / RCC and making good to the damages. | Anx-A_217 | ||
| 218 | 218 | Supplying fiting and fixing PVC plain single tee of (Supreme /Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | Anx-A_218 | ||
| 219 | 219 | a) In exposed surfaces or in trenches | Anx-A_219 | ||
| 220 | 220 | ii) 110 mm dia. | Anx-A_220 | 10 | Each |
| 221 | 221 | Providing fitting and fixing 100 mm dia PVC Cowel with ISI make complete as directed and specified. | Anx-A_221 | 4 | Each |
| 222 | 222 | Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. | Anx-A_222 | ||
| 223 | 223 | b) 110 mm dia | Anx-A_223 | 20 | Each |
| 224 | 224 | Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 58 Kg. weight complete as directed and specified. | Anx-A_224 | 4 | Each |
| 225 | 225 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | Anx-A_225 | 4 | Each |
| 226 | 226 | WATER SUPPLY WORKS | Anx-A_226 | ||
| 227 | 227 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. | Anx-A_227 | ||
| 228 | 228 | (A) Exposed or in trenches | Anx-A_228 | ||
| 229 | 229 | SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) | Anx-A_229 | ||
| 230 | 230 | Exposed or in trenches | Anx-A_230 | ||
| 231 | 231 | a) 50 mm dia | Anx-A_231 | 30 | Rm |
| 232 | 232 | (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. | Anx-A_232 | ||
| 233 | 233 | SUPREME/ PRINCE / SFMC / FUSION BAND or other equvalent approved brand (High presure pipe Sch-40) | Anx-A_233 | ||
| 234 | 234 | d) 25 mm dia | Anx-A_234 | 12 | Rm |
| 235 | 235 | e)20 mm dia | Anx-A_235 | 25 | Rm |
| 236 | 236 | f)15 mm dia | Anx-A_236 | 38 | Rm |
| 237 | 237 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) | Anx-A_237 | ||
| 238 | 238 | II) Jaquar make | Anx-A_238 | ||
| 239 | 239 | a) Continental/ Clarion | Anx-A_239 | ||
| 240 | 240 | I) Standard | Anx-A_240 | 10 | Each |
| 241 | 241 | Supplying fitting and fixing Chrome plated (C.P.) stop -cock of approved brand and size as mentioned below as directed and specified ( G.I. & C.P. pipes will be measured and paid separately) | Anx-A_241 | ||
| 242 | 242 | I) Jaquar | Anx-A_242 | ||
| 243 | 243 | (a) Continental /Clarion | Anx-A_243 | ||
| 244 | 244 | (ii) 15 mm dia Male /Female ( Long thred) | Anx-A_244 | 10 | Each |
| 245 | 245 | Supplying and fitting fixing C.P. pillar cock of 15 mm dia of approved brand as specified and directed. | Anx-A_245 | ||
| 246 | 246 | ii) Jaquar make | Anx-A_246 | ||
| 247 | 247 | (b)Long neck with areator | Anx-A_247 | 8 | Each |
| 248 | 248 | Supplying and fitting gun metal country pit valve ( full way valve) I.S.I Make as specified and directed | Anx-A_248 | ||
| 249 | 249 | a) 50 mm dia | Anx-A_249 | 2 | Each |
| 250 | 250 | b) 40 mm dia | Anx-A_250 | 2 | Each |
| 251 | 251 | c) 25 mm dia | Anx-A_251 | 2 | Each |
| 252 | 252 | Labour for sinking tube well with 40 mm ( internal) dia G.I. Pipes up to strata, having potable water including fitting and fixing strainer , hand pump and other accessories as directed complete as in any soil | Anx-A_252 | 60 | R.M |
| 253 | 253 | Supplying, fitting and fixing suction pipes ( plain/ bevel ended) , conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casting pipes complete as directed | Anx-A_253 | ||
| 254 | 254 | ( I) G.I. Pipe | Anx-A_254 | ||
| 255 | 255 | (a) TATA/SAIL (medium)( sockets should be welded to the pipes) | Anx-A_255 | ||
| 256 | 256 | iii) 40 mm diameter | Anx-A_256 | 30 | Rm |
| 257 | 257 | Supplying fitting and fixing brass Tez filter 2.00 meter long. | Anx-A_257 | 2 | Each |
| 258 | 258 | Supplying fitting and fixing check valve ( non return valve ) including threads to pipes | Anx-A_258 | ||
| 259 | 259 | c) 40 mm dia | Anx-A_259 | 4 | Each |
| 260 | 260 | Supplying fitting and placing plastic cylindrical vertical closed top (PCVC) tank of Sintex/ Polycon/ Patton make over the stagging with manhole cover with locking arrangement and cleaning arrangement including providing pads of sizes as required for inlet and outlet piped complete as directed with labour charge | Anx-A_260 | ||
| 261 | 261 | ( I) 2000 litre capacity | Anx-A_261 | ||
| 262 | 262 | (a) Sintex make | Anx-A_262 | 1 | Each |
| 263 | 263 | Internal Electrification Works | Anx-A_263 | ||
| 264 | 264 | Wiring for light/fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system, complete. | Anx-A_264 | ||
| 265 | 265 | Short point up to 3.00 metre. length. | Anx-A_265 | 18 | Each |
| 266 | 266 | Medium point up to 6.00 metre. Length. | Anx-A_266 | 60 | Each |
| 267 | 267 | Long point up to 10.00 metre. Length. | Anx-A_267 | 60 | Each |
| 268 | 268 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. | Anx-A_268 | ||
| 269 | 269 | Short point up to 3.00 mtr. length. | Anx-A_269 | 7 | Each |
| 270 | 270 | Medium point up to 6.00 metre. Length. | Anx-A_270 | 7 | Each |
| 271 | 271 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. | Anx-A_271 | ||
| 272 | 272 | With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system. | Anx-A_272 | 250 | Metre. |
| 273 | 273 | Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial flexible cable conforming to IS-694: 1990 with flexible bright annealed copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed ISI marked hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) wiring system. | Anx-A_273 | ||
| 274 | 274 | Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | Anx-A_274 | 156 | Each |
| 275 | 275 | Supplying with fitting fixing of blank plate single in modular switch system , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-A_275 | 29 | Each |
| 276 | 276 | Supplying including installation of socket outlet 10 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-A_276 | 28 | Each |
| 277 | 277 | Supplying with fitting and fixing of electronic modular fan speed controller 2 - module type MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | Anx-A_277 | ||
| 278 | 278 | 100 Watt electronic modular 4 step speed control 2 - module type | Anx-A_278 | 15 | Each |
| 279 | 279 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. | Anx-A_279 | ||
| 280 | 280 | 4 module type Metal | Anx-A_280 | 2 | Each |
| 281 | 281 | 8 module type Metal | Anx-A_281 | 4 | Each |
| 282 | 282 | 18 module type Metal | Anx-A_282 | 28 | Each |
| 283 | 283 | Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. | Anx-A_283 | ||
| 284 | 284 | 4 module | Anx-A_284 | 2 | Each |
| 285 | 285 | 8 module | Anx-A_285 | 4 | Each |
| 286 | 286 | 18 module | Anx-A_286 | 28 | Each |
| 287 | 287 | Supplying and fixing of batten holder including 11 W CFL lamp and connection as approved by the Deptt.)as required. | Anx-A_287 | 30 | Each |
| 288 | 288 | Ultra Slim T5 luminaries and Electronic ballast with 1 X 28 W T5 lamp(Crompton Greaves make Model- T5LO1128 LITE LINE/ Sleek and Ultra light extruded metal T5 luminaries and Electronic ballast with 1 X 28 W T5 lamp (Crompton Greaves make Model- T5LN28 LITE n SLIM or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make).\n | Anx-A_288 | 40 | Each |
| 289 | 289 | Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) | Anx-A_289 | ||
| 290 | 290 | Energy efficient 5-star 1200 mm sweep Fusion 5 star (Havells or equivalent make) | Anx-A_290 | 15 | Each |
| 291 | 291 | Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. | Anx-A_291 | ||
| 292 | 292 | Domestic | Anx-A_292 | ||
| 293 | 293 | High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make), Ventil Air DX 250 mm sweep Louver type (Havells make) | Anx-A_293 | 2 | Each |
| 294 | 294 | Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 1.25M X0.6MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: | Anx-A_294 | ||
| 295 | 295 | 1. 20mm X 3mm 4 strip copper Bus-Bar 0.5M length each | Anx-A_295 | ||
| 296 | 296 | 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no | Anx-A_296 | ||
| 297 | 297 | 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no | Anx-A_297 | ||
| 298 | 298 | 4. Pilot Lamp with integral ckt LED 110- 230 V (R, Y,& B - 3 no | Anx-A_298 | ||
| 299 | 299 | 5. Voltmeter & Ammeter Selector Switch - 2 no | Anx-A_299 | ||
| 300 | 300 | 6. 2 A Slide fuse unit - 3nos | Anx-A_300 | ||
| 301 | 301 | (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | Anx-A_301 | 1 | Each |
| 302 | 302 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. | Anx-A_302 | ||
| 303 | 303 | ABB, Schneider MG, legrand, Hager make) | Anx-A_303 | ||
| 304 | 304 | 4 way TPN (4+12) double door | Anx-A_304 | 2 | Each |
| 305 | 305 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | Anx-A_305 | ||
| 306 | 306 | B Series (Schneider MG, legrand, Hager make) | Anx-A_306 | ||
| 307 | 307 | 63A | Anx-A_307 | 2 | Each |
| 308 | 308 | Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | Anx-A_308 | ||
| 309 | 309 | 25 KA 415V 50 Hz 4P MCCB \n(Schneider, legrand, Siemens, Indo Asian make) | Anx-A_309 | ||
| 310 | 310 | 125A | Anx-A_310 | 1 | Each |
| 311 | 311 | 63A | Anx-A_311 | 2 | Each |
| 312 | 312 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | Anx-A_312 | ||
| 313 | 313 | B Series\n(Schneider MG, legrand, Hager make) | Anx-A_313 | ||
| 314 | 314 | 6 to 32A | Anx-A_314 | 24 | Each |
| 315 | 315 | Supply with installation & commissioning of readymade maintenance free CPRI approved technology G.I. CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals (25 K and Advance Earth Pit cover (PV including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt. | Anx-A_315 | 2 | Each |
| 316 | 316 | Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | Anx-A_316 | 18 | Metre. |
| 317 | 317 | Supply and drawing of earth continuity with 1.50 SQ mm single core flame retardant low smoke PVC insulated multistrand twisted copper cable (Green colour in the existing PVC conduits including making necessary connection as approved, specified and directed by the deptt. | Anx-A_317 | 100 | Each |
| 318 | 318 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . | Anx-A_318 | ||
| 319 | 319 | 3 & 1/2 Core A2XFY | Anx-A_319 | ||
| 320 | 320 | 25.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | Anx-A_320 | 24 | Metre |
| 321 | 321 | Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) | Anx-A_321 | ||
| 322 | 322 | 10.00 Sq.mm 4 Core U.G. cable in 40mm dia medium duty G.I. pipe | Anx-A_322 | 30 | Metre |
| 323 | 323 | 4 Core A2XWY A2XFY | Anx-A_323 | ||
| 324 | 324 | SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) DOUBLE compression BRASS GLANDS WITH NICKEL - PLATED | Anx-A_324 | ||
| 325 | 325 | WEATHERPROOF (CBW) Size: 20.5 - 23, 1 "\n | Anx-A_325 | 4 | Each |
| 326 | 326 | WEATHERPROOF (CBW) Size: 26.5 - 30, 1- 1/2 "\n | Anx-A_326 | 4 | Each |
| 327 | 327 | SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) ALUMINIUM REDUCER terminal. Size: | Anx-A_327 | ||
| 328 | 328 | ALUMINIUM REDUCER terminal. Size: 10 | Anx-A_328 | 16 | Each |
| 329 | 329 | ALUMINIUM REDUCER terminal. Size: 25 | Anx-A_329 | 8 | Each |
| 330 | 330 | Name of the Scheme: Renovation of Toilet (Boys) at Khagarijan College, Nagaon, Assam | Anx-A_330 | ||
| 331 | 331 | CEMENT CONCRETE FLOORING | Anx-A_331 | ||
| 332 | 332 | Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed. | Anx-A_332 | ||
| 333 | 333 | (b) 20 mm thick | Anx-A_333 | 60 | Sqm |
| 334 | 334 | VITRIFIED TILES | Anx-A_334 | ||
| 335 | 335 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) | Anx-A_335 | ||
| 336 | 336 | a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make | Anx-A_336 | ||
| 337 | 337 | ii) Of size 600mmx600mm and above | Anx-A_337 | 42 | Sqm |
| 338 | 338 | B) ON WALLS | Anx-A_338 | ||
| 339 | 339 | Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). | Anx-A_339 | ||
| 340 | 340 | i) Of size 300mmx450mm and above | Anx-A_340 | 90 | Sq.m |
| 341 | 341 | BLOCK BOARD SHUTTERS | Anx-A_341 | ||
| 342 | 342 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. | Anx-A_342 | ||
| 343 | 343 | b) Non decorative type and block board core. | Anx-A_343 | ||
| 344 | 344 | (iii) 30 mm thick . | Anx-A_344 | 7.2 | Sqm |
| 345 | 345 | DISTEMPERING | Anx-A_345 | ||
| 346 | 346 | a) Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. | Anx-A_346 | 750 | Sqm |
| 347 | 347 | f) Distempering with dry distemper of approved brand and manufacture(two coats)and of required shade on new wall surface to give an even shade, over and including priming coat of white primer after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. | Anx-A_347 | 750 | Sqm |
| 348 | 348 | PAINTING ON WOOD AND WOOD WOOD BASED SURFACES | Anx-A_348 | ||
| 349 | 349 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. | Anx-A_349 | ||
| 350 | 350 | (b). With ready mixed paint , wood primer (white). | Anx-A_350 | 100 | Sqm |
| 351 | 351 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. | Anx-A_351 | ||
| 352 | 352 | (i).Surfaces over 100mm in width or girth. | Anx-A_352 | ||
| 353 | 353 | b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | Anx-A_353 | 100 | Sqm |
| 354 | 354 | ALUMINIUM FITTINGS | Anx-A_354 | ||
| 355 | 355 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) | Anx-A_355 | ||
| 356 | 356 | a) Sliding door bolts | Anx-A_356 | ||
| 357 | 357 | i) 300mm x 16mm | Anx-A_357 | 50 | Each |
| 358 | 358 | b) Tower bolts | Anx-A_358 | ||
| 359 | 359 | ii) 250mm x 12mm | Anx-A_359 | 50 | Each |
| 360 | 360 | c) Door handles | Anx-A_360 | ||
| 361 | 361 | iii) 150mm | Anx-A_361 | 50 | Each |
| 362 | 362 | DISMANTLING WORKS | Anx-A_362 | ||
| 363 | 363 | Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels. | Anx-A_363 | ||
| 364 | 364 | (ii) Prop (1 : 3 : 6) or richer mix | Anx-A_364 | 150 | Sqm |
| 365 | 365 | INDIAN TYPE WATER CLOSET | Anx-A_365 | ||
| 366 | 366 | Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C. Orissa pattern ) with all fittings and fixtures complete including cutting and making good to the walls and floors wherever required.(Flushing Cistern to be paid separately) | Anx-A_366 | ||
| 367 | 367 | Parryware/Hindware/Jaquar make | Anx-A_367 | 10 | Each |
| 368 | 368 | EUROPEAN TYPE WATER CLOSET | Anx-A_368 | ||
| 369 | 369 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C. pan 400 mm high ) with seat and lead , CP brass hinges and rubber buffers, CI/MS brackets, 40 mm dia flush band with fittings including painting of fittings and brackets, required . (Flushing Cistern to be paid seperately) | Anx-A_369 | ||
| 370 | 370 | a) Parryware Make | Anx-A_370 | ||
| 371 | 371 | (i) Universal Closet S Trap (Cat No. C0271) (anglo Indian) (inclusive of seat cover) | Anx-A_371 | 8 | Each |
| 372 | 372 | CONCEALED CISTERN | Anx-A_372 | ||
| 373 | 373 | Supplying, fiting and fixing concealed cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. Compete as directed and specified (pipes will be measures separatly) | Anx-A_373 | ||
| 374 | 374 | (b) Hindware Make | Anx-A_374 | ||
| 375 | 375 | (ii)Concealed cistern 120mm with slender flush plate 120mm | Anx-A_375 | 6 | Each |
| 376 | 376 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions, etc. Complete including painting of fittings and brackets, cutting nd making good the walls & floors wherever required. | Anx-A_376 | ||
| 377 | 377 | (A) Parryware Make | Anx-A_377 | 8 | Each |
| 378 | 378 | (i) Urinal (Cat. No. URS-WHT-0704) with Sensor (Cat. No. SNR-CHR-51097) | Anx-A_378 | ||
| 379 | 379 | PVC PIPES, BENDS, JUNCTIONS, TEES ETC. | Anx-A_379 | ||
| 380 | 380 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining, fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. | Anx-A_380 | ||
| 381 | 381 | a) In exposed surfaces or in trenches. | Anx-A_381 | ||
| 382 | 382 | (ii) 110mm dia. | Anx-A_382 | 52 | Rm |
| 383 | 383 | (vi) 50mm dia | Anx-A_383 | 25 | Rm |
| 384 | 384 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. | Anx-A_384 | ||
| 385 | 385 | a) In exposed surfaces or in trenches. | Anx-A_385 | ||
| 386 | 386 | (ii) 110mm dia. | Anx-A_386 | 3 | Each |
| 387 | 387 | (v) 50mm dia | Anx-A_387 | 2 | Each |
| 388 | 388 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | Anx-A_388 | ||
| 389 | 389 | a) In exposed surfaces or in trenches. | Anx-A_389 | ||
| 390 | 390 | (ii) 110mm dia. | Anx-A_390 | 5 | Each |
| 391 | 391 | (v) 50mm dia | Anx-A_391 | 2 | Each |
| 392 | 392 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. | Anx-A_392 | ||
| 393 | 393 | (iv) 75mm dia. PVC cowel of ISI make | Anx-A_393 | 1 | Each |
| 394 | 394 | Name of the Scheme: Renovation of Toilet (Staff) at Khagarijan College, Nagaon, Assam | Anx-A_394 | ||
| 395 | 395 | CEMENT CONCRETE FLOORING | Anx-A_395 | ||
| 396 | 396 | Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed. | Anx-A_396 | ||
| 397 | 397 | (b) 20 mm thick | Anx-A_397 | 60 | Sq.m |
| 398 | 398 | VITRIFIED TILES | Anx-A_398 | ||
| 399 | 399 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) | Anx-A_399 | ||
| 400 | 400 | a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make | Anx-A_400 | ||
| 401 | 401 | ii) Of size 600mmx600mm and above | Anx-A_401 | 42 | Sq.m |
| 402 | 402 | B) ON WALLS | Anx-A_402 | ||
| 403 | 403 | Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). | Anx-A_403 | ||
| 404 | 404 | i) Of size 300mmx450mm and above | Anx-A_404 | 90 | Sq.m |
| 405 | 405 | BLOCK BOARD SHUTTERS | Anx-A_405 | ||
| 406 | 406 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. | Anx-A_406 | ||
| 407 | 407 | b) Non decorative type and block board core. | Anx-A_407 | ||
| 408 | 408 | (iii) 30 mm thick . | Anx-A_408 | 7.2 | Sq.m. |
| 409 | 409 | DISTEMPERING | Anx-A_409 | ||
| 410 | 410 | a) Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. | Anx-A_410 | 750 | Sqm |
| 411 | 411 | f) Distempering with dry distemper of approved brand and manufacture(two coats)and of required shade on new wall surface to give an even shade, over and including priming coat of white primer after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. | Anx-A_411 | 750 | Sqm |
| 412 | 412 | PAINTING ON WOOD AND WOOD WOOD BASED SURFACES | Anx-A_412 | ||
| 413 | 413 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. | Anx-A_413 | ||
| 414 | 414 | (b). With ready mixed paint , wood primer (white). | Anx-A_414 | 100 | Sqm |
| 415 | 415 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. | Anx-A_415 | ||
| 416 | 416 | (i).Surfaces over 100mm in width or girth. | Anx-A_416 | ||
| 417 | 417 | b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | Anx-A_417 | 100 | Sqm |
| 418 | 418 | ALUMINIUM FITTINGS | Anx-A_418 | ||
| 419 | 419 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished) | Anx-A_419 | ||
| 420 | 420 | a) Sliding door bolts | Anx-A_420 | ||
| 421 | 421 | i) 300mm x 16mm | Anx-A_421 | 50 | Each |
| 422 | 422 | b) Tower bolts | Anx-A_422 | ||
| 423 | 423 | ii) 250mm x 12mm | Anx-A_423 | 50 | Each |
| 424 | 424 | c) Door handles | Anx-A_424 | ||
| 425 | 425 | iii) 150mm | Anx-A_425 | 50 | Each |
| 426 | 426 | DISMANTLING WORKS | Anx-A_426 | ||
| 427 | 427 | Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels. | Anx-A_427 | ||
| 428 | 428 | (ii) Prop (1 : 3 : 6) or richer mix | Anx-A_428 | 150 | SQ.M. |
| 429 | 429 | INDIAN TYPE WATER CLOSET | Anx-A_429 | ||
| 430 | 430 | Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C. Orissa pattern ) with all fittings and fixtures complete including cutting and making good to the walls and floors wherever required.(Flushing Cistern to be paid separately) | Anx-A_430 | ||
| 431 | 431 | Parryware/Hindware/Jaquar make | Anx-A_431 | 10 | Each |
| 432 | 432 | EUROPEAN TYPE WATER CLOSET | Anx-A_432 | ||
| 433 | 433 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C. pan 400 mm high ) with seat and lead , CP brass hinges and rubber buffers, CI/MS brackets, 40 mm dia flush band with fittings including painting of fittings and brackets, required . (Flushing Cistern to be paid seperately) | Anx-A_433 | ||
| 434 | 434 | a) Parryware Make | Anx-A_434 | ||
| 435 | 435 | (i) Universal Closet S Trap (Cat No. C0271) (anglo Indian) (inclusive of seat cover) | Anx-A_435 | 8 | Each |
| 436 | 436 | CONCEALED CISTERN | Anx-A_436 | ||
| 437 | 437 | Supplying, fiting and fixing concealed cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. Compete as directed and specified (pipes will be measures separatly) | Anx-A_437 | ||
| 438 | 438 | (b) Hindware Make | Anx-A_438 | ||
| 439 | 439 | (ii)Concealed cistern 120mm with slender flush plate 120mm | Anx-A_439 | 6 | Each |
| 440 | 440 | (i) Urinal (Cat. No. URS-WHT-0704) with Sensor (Cat. No. SNR-CHR-51097) | Anx-A_440 | ||
| 441 | 441 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions, etc. Complete including painting of fittings and brackets, cutting nd making good the walls & floors wherever required. | Anx-A_441 | ||
| 442 | 442 | (A) Parryware Make | Anx-A_442 | ||
| 443 | 443 | SQUATTING PLATE URINAL | Anx-A_443 | ||
| 444 | 444 | Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass Spreader and brass unions, etc. Complete including paintings of fiiting and brackets, cutting and making good the walls & floors wherever required. | Anx-A_444 | ||
| 445 | 445 | (A) Parryware Make | Anx-A_445 | 8 | Each |
| 446 | 446 | PVC PIPES, BENDS, JUNCTIONS, TEES ETC. | Anx-A_446 | ||
| 447 | 447 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining, fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. | Anx-A_447 | ||
| 448 | 448 | a) In exposed surfaces or in trenches. | Anx-A_448 | ||
| 449 | 449 | (ii) 110mm dia. | Anx-A_449 | 52 | Rm |
| 450 | 450 | (vi) 50mm dia | Anx-A_450 | 25 | Rm |
| 451 | 451 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. | Anx-A_451 | ||
| 452 | 452 | a) In exposed surfaces or in trenches. | Anx-A_452 | ||
| 453 | 453 | (ii) 110mm dia. | Anx-A_453 | 3 | Each |
| 454 | 454 | (v) 50mm dia | Anx-A_454 | 2 | Each |
| 455 | 455 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | Anx-A_455 | ||
| 456 | 456 | a) In exposed surfaces or in trenches. | Anx-A_456 | ||
| 457 | 457 | (ii) 110mm dia. | Anx-A_457 | 5 | Each |
| 458 | 458 | (v) 50mm dia | Anx-A_458 | 2 | Each |
| 459 | 459 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. | Anx-A_459 | ||
| 460 | 460 | (iv) 75mm dia. PVC cowel of ISI make | Anx-A_460 | 1 | Each |
| 461 | 461 | Internal Electrification Works | Anx-A_461 | ||
| 462 | 462 | Wiring for light/fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system, complete. | Anx-A_462 | ||
| 463 | 463 | Short point up to 3.00 metre. length. | Anx-A_463 | 6 | Each |
| 464 | 464 | Medium point up to 6.00 metre. Length. | Anx-A_464 | 8 | Each |
| 465 | 465 | Long point up to 10.00 metre. Length. | Anx-A_465 | 8 | Each |
| 466 | 466 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. | Anx-A_466 | ||
| 467 | 467 | With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system. | Anx-A_467 | 190 | Metre. |
| 468 | 468 | switch sockets | Anx-A_468 | ||
| 469 | 469 | Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | Anx-A_469 | 30 | Each |
| 470 | 470 | Supplying with fitting fixing of blank plate single in modular switch system , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-A_470 | 4 | Each |
| 471 | 471 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. | Anx-A_471 | ||
| 472 | 472 | 8 module type Metal | Anx-A_472 | 4 | Each |
| 473 | 473 | Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. | Anx-A_473 | ||
| 474 | 474 | 8 module | Anx-A_474 | 4 | Each |
| 475 | 475 | Supplying and fixing of batten holder including 11 W CFL lamp and connection as approved by the Deptt.)as required. | Anx-A_475 | 6 | Each |
| 476 | 476 | Ultra Slim T5 luminaries and Electronic ballast with 1 X 28 W T5 lamp(Crompton Greaves make Model- T5LO1128 LITE LINE/ Sleek and Ultra light extruded metal T5 luminaries and Electronic ballast with 1 X 28 W T5 lamp (Crompton Greaves make Model- T5LN28 LITE n SLIM or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make).\n | Anx-A_476 | 16 | Each |
| 477 | 477 | Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. | Anx-A_477 | ||
| 478 | 478 | Domestic | Anx-A_478 | ||
| 479 | 479 | High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make), Ventil Air DX 250 mm sweep Louver type (Havells make) | Anx-A_479 | 8 | Each |
| 480 | 480 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. | Anx-A_480 | ||
| 481 | 481 | ABB, Schneider MG, legrand, Hager make) | Anx-A_481 | ||
| 482 | 482 | 4 way SPN single door | Anx-A_482 | 2 | Each |
| 483 | 483 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | Anx-A_483 | ||
| 484 | 484 | B Series\n(ABB, Schneider MG, legrand, Hager make) | Anx-A_484 | ||
| 485 | 485 | 6 to 32A | Anx-A_485 | 2 | Each |
| 486 | 486 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | Anx-A_486 | ||
| 487 | 487 | B Series\n(Schneider MG, legrand, Hager make) | Anx-A_487 | ||
| 488 | 488 | 6 to 32A | Anx-A_488 | 4 | Each |
| 489 | 489 | Name of the Scheme: Renovation of Academic Building of Khagarijan College, Nagaon, Assam | Anx-A_489 | ||
| 490 | 490 | FIRST FLOOR | Anx-A_490 | ||
| 491 | 491 | DISMANTLING WORKS | Anx-A_491 | ||
| 492 | 492 | Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels | Anx-A_492 | 420.9 | Sqm |
| 493 | 493 | Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels | Anx-A_493 | 0.319 | Cum |
| 494 | 494 | Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. | Anx-A_494 | ||
| 495 | 495 | (i) Area of door/window up to 3.00 m2 | Anx-A_495 | 4 | Each |
| 496 | 496 | BRICKWORK | Anx-A_496 | ||
| 497 | 497 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) | Anx-A_497 | ||
| 498 | 498 | (A) 112mm thick brick wall | Anx-A_498 | ||
| 499 | 499 | (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | Anx-A_499 | 128.22 | Sqm |
| 500 | 500 | PLASTERING | Anx-A_500 | ||
| 501 | 501 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_501 | ||
| 502 | 502 | A) On rough side | Anx-A_502 | ||
| 503 | 503 | b) In cement mortar 1:4 | Anx-A_503 | 39.6 | Sqm |
| 504 | 504 | (a) On Single coat plaster | Anx-A_504 | ||
| 505 | 505 | B) On fair side | Anx-A_505 | ||
| 506 | 506 | b) In cement mortar 1:4 | Anx-A_506 | 39.6 | Sqm |
| 507 | 507 | RCC WORK | Anx-A_507 | ||
| 508 | 508 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) | Anx-A_508 | ||
| 509 | 509 | (B) In super structure from plinth level up to 1st floor level. | Anx-A_509 | ||
| 510 | 510 | N) Without using admixture, plasticiser | Anx-A_510 | ||
| 511 | 511 | b) M20 grade concrete or Prop. 1:1.5:3 | Anx-A_511 | 0.425 | Cum |
| 512 | 512 | SHUTTERING AND FORM WORK | Anx-A_512 | ||
| 513 | 513 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. | Anx-A_513 | ||
| 514 | 514 | (a) For depth not exceeding 1.0M. | Anx-A_514 | ||
| 515 | 515 | (ii) Using 25mm thick plank | Anx-A_515 | 9.5 | Sqm |
| 516 | 516 | CEMENT CONCRETE FLOORING | Anx-A_516 | ||
| 517 | 517 | Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed. | Anx-A_517 | ||
| 518 | 518 | (a) 15 mm thick | Anx-A_518 | 420.88 | Sqm |
| 519 | 519 | P.V.C. DOORS & DOOR FRAMES | Anx-A_519 | ||
| 520 | 520 | Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately) | Anx-A_520 | ||
| 521 | 521 | a) 24mm thick | Anx-A_521 | 3.15 | Sqm |
| 522 | 522 | CHOWKATHS | Anx-A_522 | ||
| 523 | 523 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. | Anx-A_523 | ||
| 524 | 524 | (b) With 1st class timber (Bonsum/ Sundi) | Anx-A_524 | 0.06 | Cum |
| 525 | 525 | Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mm x75 mm x3.55mm) with necessary screws (other fittings to be measured and paid separately ) | Anx-A_525 | ||
| 526 | 526 | B) With 1st class local wood \n(Gamari/Hollock/Bonsum ) | Anx-A_526 | ||
| 527 | 527 | (iii) 30 mm thick. | Anx-A_527 | 5.46 | Sqm |
| 528 | 528 | WALL PAINTING | Anx-A_528 | ||
| 529 | 529 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. | Anx-A_529 | ||
| 530 | 530 | (a) Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | Anx-A_530 | 930.24 | Sqm |
| 531 | 531 | PAINTING ON WOOD AND WOOD WOOD BASED SURFACES | Anx-A_531 | ||
| 532 | 532 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. | Anx-A_532 | ||
| 533 | 533 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. | Anx-A_533 | 243.93 | Sqm |
| 534 | 534 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. | Anx-A_534 | ||
| 535 | 535 | (i) Surfaces over 100mm in width or girth. | Anx-A_535 | ||
| 536 | 536 | a) General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | Anx-A_536 | 243.93 | Sqm |
| 537 | 537 | GYPBOARD CEILING | Anx-A_537 | ||
| 538 | 538 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. \n | Anx-A_538 | ||
| 539 | 539 | Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). \n\n | Anx-A_539 | ||
| 540 | 540 | 9.5mm thick | Anx-A_540 | 420.88 | Sqm |
| 541 | 541 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Department | Anx-A_541 | ||
| 542 | 542 | (i) 0.40 mm thick | Anx-A_542 | 491.93 | Sqm |
| 543 | 543 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete.\nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Department | Anx-A_543 | ||
| 544 | 544 | (i) 0.40 mm thick | Anx-A_544 | 48.7 | RM |
| 545 | 545 | TILES WORK | Anx-A_545 | ||
| 546 | 546 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) | Anx-A_546 | ||
| 547 | 547 | a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make | Anx-A_547 | ||
| 548 | 548 | i) Of size 400mmx400mm and above | Anx-A_548 | 471.97 | Sqm |
| 549 | 549 | STEEL AND IRON WORK | Anx-A_549 | ||
| 550 | 550 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) | Anx-A_550 | ||
| 551 | 551 | a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL | Anx-A_551 | ||
| 552 | 552 | (ii)Super Ductile (SD) TMT reinforcement bars | Anx-A_552 | 1.2 | Qntl |
| 553 | 553 | WATER SUPPLY AND SANITARY WORK | Anx-A_553 | ||
| 554 | 554 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) | Anx-A_554 | ||
| 555 | 555 | A) Parryware make | Anx-A_555 | ||
| 556 | 556 | b) White | Anx-A_556 | ||
| 557 | 557 | (vii) Niagara (Cat No.C0252) (inclusive of seat cover) | Anx-A_557 | 2 | Each |
| 558 | 558 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. | Anx-A_558 | ||
| 559 | 559 | (A) Parryware Make | Anx-A_559 | ||
| 560 | 560 | (a) White | Anx-A_560 | ||
| 561 | 561 | (iv) Flat Back (Cat. No.C0501/72) | Anx-A_561 | 2 | Each |
| 562 | 562 | Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. | Anx-A_562 | ||
| 563 | 563 | (A) Parryware Make | Anx-A_563 | ||
| 564 | 564 | (a) White( Cat No. C0503) | Anx-A_564 | 2 | Each |
| 565 | 565 | Supplying, fiting and fixing automatic flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) | Anx-A_565 | ||
| 566 | 566 | (ii) Hindware Make | Anx-A_566 | ||
| 567 | 567 | (a) White | Anx-A_567 | ||
| 568 | 568 | (I) Sleek+ PVC Cistern | Anx-A_568 | 2 | Each |
| 569 | 569 | Under Counter Basin | Anx-A_569 | ||
| 570 | 570 | (B) Hindware Make | Anx-A_570 | ||
| 571 | 571 | (a) White | Anx-A_571 | ||
| 572 | 572 | (iii) Corner 450x390( Cat No. 10031) | Anx-A_572 | 2 | Each |
| 573 | 573 | Providing fitting and fixing Mirror with plastic frame of size 500x 400 mm complete as directed and specified . | Anx-A_573 | 2 | Each |
| 574 | 574 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. | Anx-A_574 | ||
| 575 | 575 | (A) Parryware Make | Anx-A_575 | ||
| 576 | 576 | (ii) Wall Soap tray (Cat. No.C9951) | Anx-A_576 | 2 | Each |
| 577 | 577 | Providing, fitting and fixing CP towel ring complete as directed and specified. | Anx-A_577 | ||
| 578 | 578 | (a) Sona make | Anx-A_578 | ||
| 579 | 579 | (i) Towel ring round( Cat No. TR 06051) | Anx-A_579 | 2 | Each |
| 580 | 580 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) | Anx-A_580 | ||
| 581 | 581 | (a) Supreme shower with arm | Anx-A_581 | 2 | Each |
| 582 | 582 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. | Anx-A_582 | ||
| 583 | 583 | a) In exposed surfaces or in trenches. | Anx-A_583 | ||
| 584 | 584 | (ii) 110mm dia | Anx-A_584 | 38 | R.M. |
| 585 | 585 | b) Concealed by chiselling or breaking brick wall/ C.C./ R.C.C and making good to the damages. | Anx-A_585 | ||
| 586 | 586 | (ii) 110mm dia | Anx-A_586 | 2 | R.M. |
| 587 | 587 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. | Anx-A_587 | ||
| 588 | 588 | a) In exposed surfaces or in trenches | Anx-A_588 | ||
| 589 | 589 | ii) 110 mm dia. | Anx-A_589 | 10 | Each |
| 590 | 590 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | Anx-A_590 | ||
| 591 | 591 | a) In exposed surfaces or in trenches | Anx-A_591 | ||
| 592 | 592 | ii) 110 mm dia. | Anx-A_592 | 6 | Each |
| 593 | 593 | Supplying fiting and fixing PVC plain single tee of (Supreme /Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | Anx-A_593 | ||
| 594 | 594 | a) In exposed surfaces or in trenches | Anx-A_594 | ||
| 595 | 595 | ii) 110 mm dia. | Anx-A_595 | 6 | Each |
| 596 | 596 | Providing fitting and fixing 100 mm dia PVC Cowel with ISI make complete as directed and specified. | Anx-A_596 | 4 | Each |
| 597 | 597 | Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. | Anx-A_597 | ||
| 598 | 598 | b) 110 mm dia | Anx-A_598 | 15 | Each |
| 599 | 599 | Internal Electrification Works | Anx-A_599 | ||
| 600 | 600 | Wiring for light/fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system, complete. | Anx-A_600 | ||
| 601 | 601 | Short point up to 3.00 metre. length. | Anx-A_601 | 15 | Each |
| 602 | 602 | Medium point up to 6.00 metre. Length. | Anx-A_602 | 40 | Each |
| 603 | 603 | Long point up to 10.00 metre. Length. | Anx-A_603 | 35 | Each |
| 604 | 604 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. | Anx-A_604 | ||
| 605 | 605 | Short point up to 3.00 mtr. length. | Anx-A_605 | 5 | Each |
| 606 | 606 | Medium point up to 6.00 metre. Length. | Anx-A_606 | 10 | Each |
| 607 | 607 | Long point up to 10.00 metre. Length. | Anx-A_607 | 20 | Each |
| 608 | 608 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. | Anx-A_608 | ||
| 609 | 609 | With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system. | Anx-A_609 | 100 | Metre. |
| 610 | 610 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface with flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity. | Anx-A_610 | ||
| 611 | 611 | With 3 x 6 sq. mm. + earth continuity with2x 4 sq. mm. cable in flat 25 mm ISI marked casing 'n' capping system. | Anx-A_611 | 40 | Metre. |
| 612 | 612 | Supplying with fitting fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | Anx-A_612 | 125 | Each |
| 613 | 613 | Supplying including installation of socket outlet 10 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of depart | Anx-A_613 | 82 | Each |
| 614 | 614 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. | Anx-A_614 | ||
| 615 | 615 | 8 module type Metal | Anx-A_615 | 35 | Each |
| 616 | 616 | 18 module type Metal | Anx-A_616 | 8 | Each |
| 617 | 617 | Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. | Anx-A_617 | ||
| 618 | 618 | 8 module | Anx-A_618 | 35 | Each |
| 619 | 619 | 18 module | Anx-A_619 | 8 | Each |
| 620 | 620 | Supplying with fitting and fixing of electronic modular fan speed controller 2 - module type MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | Anx-A_620 | ||
| 621 | 621 | 100 Watt electronic modular 4 step speed control 2 - module type | Anx-A_621 | 33 | Each |
| 622 | 622 | Supplying and fixing of batten holder including 11 W CFL lamp and connection as approved by the Deptt.)as required. | Anx-A_622 | 6 | Each |
| 623 | 623 | Ultra Slim T5 luminaries and Electronic ballast with 1 X 28 W T5 lamp(Crompton Greaves make Model- T5LO1128 LITE LINE/ Sleek and Ultra light extruded metal T5 luminaries and Electronic ballast with 1 X 28 W T5 lamp (Crompton Greaves make Model- T5LN28 LITE n SLIM or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make).\n | Anx-A_623 | 33 | Each |
| 624 | 624 | Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) | Anx-A_624 | ||
| 625 | 625 | Energy efficient 5-star 1200 mm sweep Fusion 5 star (Havells or equivalent make) | Anx-A_625 | 33 | Each |
| 626 | 626 | Supplying with fitting fixing of following Clean room luminaries of CFL either surface mounting or recessed mounted as specified and directed by the department. | Anx-A_626 | ||
| 627 | 627 | CRFW12218(300) 2 X 18 W CFL Crompton make) in surface/ recessed mounted IP 65 bottom open able Clean room luminaries with clear UV resistant acrylic with 2 x 18 W CFL. or equivalent (Equivalent will be selected by the deptt considering the mother items rate PHILIPS/ WIPRO/ JAQUAR make). | Anx-A_627 | 15 | Each |
| 628 | 628 | Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 1.25M X0.6MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: | Anx-A_628 | ||
| 629 | 629 | 1. 20mm X 3mm 4 strip copper Bus-Bar 0.5M length each | Anx-A_629 | ||
| 630 | 630 | 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no | Anx-A_630 | ||
| 631 | 631 | 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no | Anx-A_631 | ||
| 632 | 632 | 4. Pilot Lamp with integral ckt LED 110- 230 V (R, Y,& B - 3 no | Anx-A_632 | ||
| 633 | 633 | 5. Voltmeter & Ammeter Selector Switch - 2 no | Anx-A_633 | ||
| 634 | 634 | 6. 2 A Slide fuse unit - 3nos | Anx-A_634 | ||
| 635 | 635 | (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | Anx-A_635 | 1 | Each |
| 636 | 636 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. | Anx-A_636 | ||
| 637 | 637 | ABB, Schneider MG, legrand, Hager make) | Anx-A_637 | ||
| 638 | 638 | 4 way TPN (4+12) double door | Anx-A_638 | 2 | Each |
| 639 | 639 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | Anx-A_639 | ||
| 640 | 640 | B Series\n(Schneider MG, legrand, Hager make) | Anx-A_640 | ||
| 641 | 641 | 6 to 32A | Anx-A_641 | 24 | Each |
| 642 | 642 | Supplying with fitting and fixing TP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | Anx-A_642 | ||
| 643 | 643 | B Series\n(Schneider MG, legrand, Hager make) | Anx-A_643 | ||
| 644 | 644 | 40A | Anx-A_644 | 4 | Each |
| 645 | 645 | Supply with installation & commissioning of readymade maintenance free CPRI approved technology G.I. CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals (25 K and Advance Earth Pit cover (PV including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt. | Anx-A_645 | 2 | Each |
| 646 | 646 | Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. | Anx-A_646 | 2 | Each |
| 647 | 647 | Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt . | Anx-A_647 | 2 | Each |
| 648 | 648 | Supplying & laying of 8 SWG Copper. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | Anx-A_648 | 25 | Metre. |
| 649 | 649 | Supply and drawing of earth continuity with 1.50 SQ mm single core flame retardant low smoke PVC insulated multistrand twisted copper cable (Green colour in the existing PVC conduits including making necessary connection as approved, specified and directed by the deptt. | Anx-A_649 | 200 | Each |
| 650 | 650 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . | Anx-A_650 | ||
| 651 | 651 | 4 Core A2XWY A2XFY | Anx-A_651 | ||
| 652 | 652 | 10.00 Sq. mm.4 Core armoured U.G. cable | Anx-A_652 | 50 | Metre |
| 653 | 653 | SUPPLYING FITTING AND FIXING OF (DOWELLS/ COMET make) DOUBLE compression BRASS GLANDS WITH NICKEL - PLATED | Anx-A_653 | ||
| 654 | 654 | WEATHERPROOF (CBW) Size: 23.5 - 26, 1- 1/4 "\n | Anx-A_654 | 2 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
