Supply Of Op Works Stores, Uri, Naugam, Baramulla, Rampur, Buniyar, Gulmarg,-Jammu And Kashmir

TDR : 23303506

Tender Notice
BOQ

Expired

Uri, Naugam, Baramulla, Rampur, Buniyar, Gulmarg, , Jammu And Kashmir

Tender Brief : Supply Of Op Works Stores

Document Fees
Refer document

EMD
₹ 597000.0 /-

Tender Value
Refer document

Submission Date
25-01-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: SUPPLY OF OP WKS STORES
1	1	Supply of pre-fabricated steel tubular FFL (2/1) structure of size 2.40 x 2.40m. (Including 1.20 wide Varandah). Height at front and rear side 2.10 and 2.70m gable height (set of two cubical of size 1.2m x1.2m each) all as per HQ 15 Corps Drg No 3534/FFL 3/1/001/Sheet ½ and 2/2 dt 27 Apr 2017. All other technical specification a per Appendix ‘L’ to Annexure I & Sketch Annexure V to X RFP .
2	1.01	Uri/Mohura	item 01	8	Nos
3	1.02	Naugam	item 02	5	Nos
4	1.03	Rampur/Boniyar	item 03	6	Nos
5	1.04	Pattan	item 04	1	Nos
6	2	Supply of pre-fabricated steel tubular Bathing Cubicle (2/1) structure of size 2.40 x 2.40m.(Including 1.20 wide Varandah) Height at front and rear side 2.10m and 2.70 gable height (Set of two cubical of size 1.2m x 1.2m each) all as per HQ 15 Corps Drg No 3534/BC 2/1/001/Sheet 1/2 and 2/2 dt 27 Apr 2017 Technical Specification attached as per Appendix ‘M’ Sketch Annexure I to IV RFP .
7	2.01	Uri/Mohura	item 05	3	Nos
8	2.02	Naugam	item 06	3	Nos
9	2.03	Rampur/Boniyar	item 07	1	Nos
10	2.04	Ziran/Gulmarg	item 08	1	Nos
11	2.05	Pattan	item 09	1	Nos
12	3	Single-Tier Sleeping Bunks:\n(a) Pre fabricated single sleeping bunk made of MS hollow section of size 25 mm x 25 mm x 2.65 mm thick and angle iron of size 40 mm x 40 x 5 mm including cushioned platform as per CE 15 Corps Drawing No 3534/SINGLE SLEEPING BUNK/001 SHEET 1/1 dt 25 May 17 attached with this quotation. Cleat of MS rectangular box of size 25 mm x 25 mm x 75 mm long to be welded. Angle Iron frame will be fixed to hollow section vertical frame with nuts and bolts. The bunk should have provisions to place a removable type mattress of size 1830 mm x 910 mm to angle iron frame with adequate holes pre drilled in the frame. The outer size of the bunks will be 1840 mm x 920 mm horizontally and 750 mm x 920 mm vertically. All MS pipes shall be medium grade ISI mark and shall be provided with two coats of superior quality Black spray paint over a coat of red oxide primer of Make Johnnson & Nicholson (India Ltd), Nerolac (Paints) and Asian (Paints) on all steel surfaces. \n\n(b) Puff Mattress:\nSingle piece cushion made of 100 mm thick “PUF” foam of density 40 Kg / cum as applicable for sleeping cushions of standard make Sleepwell/ Kurlon of size 1830 mm x 910 mm. The PUF foam shall be pasted on 12 mm thick Ply-Wood (BWR) of make Kitply / National / Greenply. The ‘PUF’ foam pasted on the ply-wood shall be enclosed vinyl coated laminated upholstery cloth (Rexene) for attached in RFP of Drawing attached as Appendix 'V'.
13	3.01	Uri/Mohura	item 10	22	Nos
14	3.02	Naugam	item 11	4	Nos
15	4	Modified steel tubular pole duly painted with anti corrosive silver coated paint made of MS structural steel tube section having four segment of different bore as described in technical Specification as per Appx 'N' of RFP Part II.
16	4.01	Uri/Mohura	item 12	63	Nos
17	4.02	Naugam	item 13	21	Nos
18	4.03	Boniyar/Rampur	item 14	21	Nos
19	4.04	Pattan	item 15	21	Nos
20	5	Pre fabricated Pump Shed of size 2.4M X 2.4M and height 1.8M at front side and 1.60 M at rear side above FFL 300 mm hight with Angle Iron of 50x50x6 mm for all column , Purlin and rafter welded with connecting MS Plates 6mm thick (MS Plates size for bottom of the column 200mmx200mm and top of the column and conneting at the purling to column with cleats) with sufficiant Nut and Bolts including supply of 4 Nos of CGI sheet 810 X3050 mm , 0.63mm thick with galvanized of 375 GSM (Galvanisation as per IS-429) and 80 Nos of 'J' Hooks for fixing of CGI Sheet and All steel structure will be painted with two coats of synthetic enamel paint of colour Brush Green over a coat of red oxide primer complete. Sketch Appendix 'O' to IV RFP .
21	5.01	Uri/Mohura	item 16	5	Nos
22	5.02	Naugam	item 17	5	Nos
23	5.03	Boniyar/Rampur	item 18	5	Nos
24	6	Puff Mattress: Single piece cushion made of 100 mm thick “PUF” foam of density 40 Kg / cum as applicable for sleeping cushions of standard make Sleepwell/ Kurlon of size 1830 mm x 910 mm. The PUF foam shall be pasted on 12 mm thick Ply-Wood (BWR) of make Kitply / National / Greenply. The ‘PUF’ foam pasted on the ply-wood shall be enclosed vinyl coated laminated upholstery cloth (Rexene)
25	6.01	Uri/Mohura	item 19	14	Nos
26	7	Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 4300mm length including detachble 'Y' arm. The length of one arm 800mm sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/ Picket /001 Sheet 1/1 dt 05 Sep 2018 and all other Technical Specification as per Appendix 'A' 04 NO 12mm dia holes will be provided on angle post and 'Y' arm each as shown in drg att for fixing of 'Y' arm nut bolt. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge. Drawing attached as Appendix ‘P’
27	7.01	Rampur/Boniyar	item 20	2280	Nos
28	8	Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 2100mm long single plece, having sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/ Picket /001 Sheet 1/1 dt 05 Jul 2013. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge. Drawing attached as Appendix ‘Q’
29	8.01	Uri/Mohura	item 21	140	Nos
30	8.02	Naugam	item 22	89	Nos
31	8.03	Rampur/Boniyar	item 23	166	Nos
32	8.04	Ziran/Gulmarg	item 24	3	Nos
33	9	Angle iron Strut made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 2700mm long single piece, having sectional weight 5.8 Kg per mtr confirming to HQ 15 Corps drawing No 3534/LC /Picket/002 Sheet 4/5 dt 24 Jul 2009. All angle iron Strut will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of bush green synthetic enamel spray paint, Except bottom 600mm length. Finished angle iron post shall be free from burbs and sharp edge. Drawing attached as Appendix ‘R’
34	9.01	Uri/Mohura	item 25	171	Nos
35	9.02	Naugam	item 26	83	Nos
36	9.03	Rampur/Boniyar	item 27	370	Nos
37	9.04	Ziran/Gulmarg	item 28	44	Nos
38	10	Supply of Pre-Fabricated Store Shelter made up of Steel Structure of size 18.30 x 6.10 x2.95m (Truss Bottom) as per HQ 15 Corps drawing No 3534/Store/001/Sheet 1/2 and 2/2 dt 10 Apr 2018 and all other technical specification and store list attached in RFP of Drawing attached as Appendix ‘S’
39	10.01	Uri/Mohura	item 29	1	Nos
40	11	Steel window 1200x600mm shall be provided. The main fram work shall be MS channel 'U' sec 25x25x5mm (12mm grove x 6mm thick), shulters of size 0.06x0.30m and 6mm thick will be fixed for smoothly sliding within MS 'U' channel. Two bow handles are also provided for easy opening and shifting the shulters. Externally Acrylic sheet bottom hung shutters will be provided incl iron mongery etc completed incl painting.
41	11.01	Uri/Mohura	item 30	12	Nos
42	12	Two-Tier Sleeping Bunks:\n(a) MS pipe two tier sleeping bunks as per CE 15 Corps Drawing No 3534/ OW/15 Corps / Two Tier Sleeping Bunk/ sheet 1/1 dated 14 Jul 2010 attached with this TS. A detachable ladder made up with 20 mm MS pipe with four steps to be provided in each bunk. Male / female MS rectangular box of size 50 mm x 25 mm x 75 mm long to be welded, two side protector bars of 15 mm dia MS pipe on top bunk to be welded as per details shown in drawing. The outer size of the bunk will be 1970 mm x 950 mm horizontally and 1950 mm x 950 mm vertically. The Bunk should have provision to place a removable type matress of size 1830 mm x 910 mm to angle iron frame with adequate holes pre drilled in the frame. All MS pipes shall be medium grade ISI mark and provided with two coats of superior quality Black Spray paint over a coat of red oxide primer.\n\n(b) Two Nos single piece cushion made of 100 mm thick “PUF” foam of density 40 Kg/cum as applicable for sleeping cushions to be provided with each bunk removable type of standard make : Sleepwell/Kurlon of size 1830 mm x 910 mm. The Puf Foam pasted on the ply - wood shall be enclosed vinyl coated laminated upholtery cloth (Rexene) for attached in RFP of Drawing attached as Appendix ‘T’
43	12.01	Uri/Mohura	item 31	12	Nos
44	13	Per fabricated steel door of size 1.20m x 1.80 m made out of 2 mm thick MS sheet welded/Riveted on 45 x 45 x6 mm ISA shutter frame with diogonal bracings with same angle. Frame fitted on door column 2.10 Mtr long made up of equal angle 50 x 50 x 6mm with 03 Nos Hinges and 03 Nos hold fasts incl requsite iron mongery. Door shall be painted with two coat of Synthetic enemal paint OG color over one coat of red oxide primer.
45	13.01	Uri/Mohura	item 32	12	Nos
46	14	Single piece cushion made of 100 mm thick “PUF” foam of density 40 Kg / cum as applicable for sleeping cushions of standard make Sleepwell/ Kurlon of size 1830 mm x 910 mm. The PUF foam shall be pasted on 12 mm thick Ply-Wood (BWR) of make Kitply / National / Greenply. The ‘PUF’ foam pasted on the ply-wood shall be enclosed vinyl coated laminated upholstery cloth (Rexene) of specification
47	14.01	Uri/Mohura	item 33	18	Nos
48	15	Straining Y-Arm for supporting top PTCC: Material : MS Angle Size : 50x50x5mm as per IS 1852. Coating : Hot dip galvanized to Min 350 GSM as per IS 4759/2629, Length of 1 Arm is 750mm,outer dia of 63 mm of sleeve cap will be fitted on the top of the fence post. Straining Y-Arm will manufactured as per drawing No 3534/ACF/LC/002/SHEET 2/3 dt 10 Apr 18 Straining Y Arm will be installed at every 30 mtrs except intermediate arm post.
49	15.01	Uri/Mohura	Item 34	532	Nos
50	15.02	Boniyar/Rampur	Item 35	532	Nos
51	16	Intermediate Y-Arm for supporting top PTCC: Material: MS Angle Size :50x50x3mm as per IS 1852 Coating :Hot dip galvanized to Min 350 GSM as per IS 4759 / IS 2629.Length of 1 Arm is 750 MM , Angle between the two arms is 120 degree , with a support steel strip of 25x5 mm (galvanized as per IS 4759) and fixed with mushroom head bolt and nut (M8x25mm).Intermediate Y-Arm will manufactured as per drawing No 3534/ACF/LC/003/SHEET3/3 dt 10 Apr 18.attached Inner dia 80mm of cap bolted on top of the fence post.1 Intermediate Y Arm will be installed at every post except the posts with Straining Y arms
52	16.01	Uri/Mohura	Item 36	650	Nos
53	16.02	Boniyar/Rampur	Item 37	650	Nos
54	17	PTCC Rod 12mm dia MS Rod Suitable arrangement be made on fence post for holding of PTCC of PTCC rod.
55	17.01	Uri/Mohura	Item 38	629	Nos
56	17.02	Boniyar/Rampur	Item 39	629	Nos
57	18	Mushroom Head Bolt with breakable head safety nut (M8X120) : Material : SS
58	18.01	Uri/Mohura	Item 40	753	Nos
59	18.02	Boniyar/Rampur	Item 41	753	Nos
60	19	Collapsible Galvanised Wire Mesh crate of sixe 5 ft (length) X 2 feet (width) X 4 feet (hight).
61	19.01	Uri/Mohura	Item 42	50	Nos
62	20	ISMB 150 (RSJ 150x75mm) 3.4m long conforming to IS 808-1973,
63	20.01	Uri/Mohura	Item 43	56	Nos
64	20.02	Naugam	Item 44	36	Nos
65	20.03	Boniyar	Item 45	28	Nos
66	21	ISMB 150 (RSJ 150x75mm) 1.5m long conforming to IS 808-1973,
67	21.01	Uri/Mohura	Item 46	18	Nos
68	21.02	Naugam	Item 47	9	Nos
69	21.03	Boniyar	Item 48	7	Nos
70	22	ISMB 200 (RSJ 200x100mm) 5.4m long conforming to IS 808-1973,
71	22.01	Uri/Mohura	Item 49	32	Nos
72	23	ISMB 150 (RSJ 150x75mm) 3.75m long conforming to IS 808-1973,
73	23.01	Uri/Mohura	Item 50	12	Nos
74	23.02	Rampur/Boniyar	Item 51	175	Nos
75	24	ISMB 150 (RSJ 150x75mm) 3.70m long conforming to IS 808-1973,
76	24.01	Uri/Mohura	Item 52	12	Nos
77	25	ISMB Girder 150x75mm 4.80m long conforming to IS 808-1973,
78	25.01	Naugam	Item 53	14	Nos
79	26	ISMC 75 X40mm 3.4 m long welded with plate 250x250x6mm on one side with holes drilled conforming to IS 808-1973.
80	26.01	Uri/Mohura	Item 54	84	Nos
81	26.02	Naugam	Item 55	54	Nos
82	26.03	Boniyar	Item 56	42	Nos
83	27	Precast cement concrete lintel in door of length 1.20 m, width 400 mm and 200 mm thick, Type B-1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 including necessary form work and the reinforcement with TMT bars should be of Main bars with 12 mm dia bars, 04 Nos and Stirrups with 8 mm dia bars,09 Nos including fabrication with binding wire etc.
84	27.01	Uri/Mohura	Item 57	14	Nos
85	27.02	Naugam	Item 58	9	Nos
86	27.03	Boniyar	Item 59	7	Nos
87	28	MS rack of size 1.22m x 0.61m x 1.65m will be supplied alongwith each PD. Vertical legs and frame of the racks shall be fabricated out of MS slotted angle iron 65 x 35 x 3mm thick with 2 middle supports of FI 40x 6mm (1.88Kg/RM) in horizontal frame of racks. The rack will have 2 shelves with 12mm thick ply wood (Make : Kitply / Assam Gold/ Green Ply / Archid). The plywood will be fixed with frame with the use of nuts and bolts of 12mm dia. The horizontal frame and vertical legs of the racks will be jointed with 12mm dia nut and bolt and angle iron cleats. Drawing attached as Appendix ‘U’
88	28.01	Uri/Mohura	Item 60	42	Nos
89	28.02	Naugam	Item 61	27	Nos
90	28.03	Boniyar	Item 62	21	Nos
91	29	Covered entrance to the door fabricated out of 40mm dia MS pipe an covered with CGI Shhets 0.63mm thick
92	29.01	Uri/Mohura	Item 63	14	Nos
93	29.02	Naugam	Item 64	9	Nos
94	29.03	Boniyar	Item 65	7	Nos
95	30	Supply of Class 1 double twisted, Zinc coated MS Gabion boxes of size 3m x 1m x 1m having following specifications :-\n(a) Mesh size - 80 x 100 mm\n(b) Number of diaphragms - 02 Nos\n(c) Mesh wire size - 2.40 mm\n(d) Mesh wire dia – 3.00 mm\n(e) Edge / Selvedge dia – 3.90 mm\n(f) Lacing wire dia – 2.20mm\n(g) Minimum qty of lacing wire – 3% of total weight of gabion basket supplied.
96	30.01	Uri/Mohura	Item 66	815	Nos
97	30.02	Naugam	Item 67	632	Nos
98	30.03	Boniyar/Rampur	Item 68	400	Nos
99	31	Angle iron picket (ISA 50x50x6mm) 2.70m long confirming to IS 2062-1964 including two coats of synthetic enamel paint OG over a coat of red oxide primer painting etc.
100	31.01	Boniyar/Rampur	Item 69	425	Nos
101	32	Pre fabricated Man hole cover 6' x 4' made of ISA 40x40x6mm frame and MS black Sheet of 1.48mm thick complete including two coats of red oxide primer on inside surfaces and two coats of Black Japan paint over a coat of red oxide primer on top surfaces.
102	32.01	Boniyar/Rampur	Item 70	1	Nos
103	32.02	Pattan	Item 71	1	Nos
104	33	False ceiling made of 40 mm thick PUF insulated panel with 0.63 mm thick hot dipped galvanised steel sheet on both side supported with held of inverted Tee Sec 50X50X50 mm thick and L Sec of 50X50X5mm thick fixed to truss.
105	33.01	Naugam	Item 72	50	Sqm
106	34	Supply of fire Resistant FRP set will have 256 sqft FRP sheet of thickness not less than 4mm with ISI mark each set will consist of following Items:-\n(a) FRP sheet of size 4ft x 2ft with thicness not less than 4mm-32 Nos\n(b) 'U' shape MS hook of 2 inch (length) X 1 inch (width) x 2mm thickness to be proved separately with suitabe size nuts & bolts for fixing FRP sheet with walls - 96 Nos
107	34.01	Uri/Mohura	Item 73	1	Set
108	34.02	Boniyar/Rampur	Item 74	1	Set
109	35	Galvanised Steel Barbed Wire, ISI marked A-5 designation for Galvanised steel barbed wire for fencing shall conform to IS 278 – 1978. The barbed wire shall consist of two line wire 2.24 mm dia (Tensile strength 390 – 590 N/mm2 minimum breaking load of complete barbed wire 3kN), one or both containing 2.00 mm dia barbs at 75 mm centre to centre and weighing 97 to 106 Kg per Km. The barbs shall have a length of not less than 13 mm and not more than 18 mm. The line and point wires shall be circular in section, free from scales and other defects and shall be uniformly galvanised. The line wire shall be in continuous length and shall not contain any welds other than those in the rod before it is drawn.\n The galvanising shall conform to the requirement as laid down for light – coated wire of IS 4826 – 1968 `Specification for galvanised coating on round steel wires. Barbing wire(line) shall be hard type heavy coated (230 gm/sq m) and barbing wire (point) shall be hard type light coated (70 gm/sq m). The Galvanised barbed wire will be in bundles of 25 to 30 Kgs each and the bundles will be packed in hessian cloth, the bundles should be strong enough to withstand rough handling during transportation. Every reel of barbed wire shall be marked legibly with BIS standard make the name of manufacturer, the type of barbed wire, the diameter of the line and point wires, barb spacing and length and/or mass of the reel.
110	35.01	Naugam	Item 75	12	MT
111	35.02	Boniyar/Rampur	Item 76	21	MT
112	35.03	Ziran/Gulmarg	Item 77	10	MT

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Jammu And Kashmir Tenders

Machinery and Tools Tenders

Hardware and Fasteners Tenders

Bolts Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Supply Of Op Works Stores, Uri, Naugam, Baramulla, Rampur, Buniyar, Gulmarg,-Jammu And Kashmir

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Name of Work: SUPPLY OF OP WKS STORES
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	Supply of pre-fabricated steel tubular FFL (2/1) structure of size 2.40 x 2.40m. (Including 1.20 wide Varandah). Height at front and rear side 2.10 and 2.70m gable height (set of two cubical of size 1.2m x1.2m each) all as per HQ 15 Corps Drg No 3534/FFL 3/1/001/Sheet ½ and 2/2 dt 27 Apr 2017. All other technical specification a per Appendix ‘L’ to Annexure I & Sketch Annexure V to X RFP .
2	1.01	Uri/Mohura	item 01	8	Nos
3	1.02	Naugam	item 02	5	Nos
4	1.03	Rampur/Boniyar	item 03	6	Nos
5	1.04	Pattan	item 04	1	Nos
6	2	Supply of pre-fabricated steel tubular Bathing Cubicle (2/1) structure of size 2.40 x 2.40m.(Including 1.20 wide Varandah) Height at front and rear side 2.10m and 2.70 gable height (Set of two cubical of size 1.2m x 1.2m each) all as per HQ 15 Corps Drg No 3534/BC 2/1/001/Sheet 1/2 and 2/2 dt 27 Apr 2017 Technical Specification attached as per Appendix ‘M’ Sketch Annexure I to IV RFP .
7	2.01	Uri/Mohura	item 05	3	Nos
8	2.02	Naugam	item 06	3	Nos
9	2.03	Rampur/Boniyar	item 07	1	Nos
10	2.04	Ziran/Gulmarg	item 08	1	Nos
11	2.05	Pattan	item 09	1	Nos
12	3	Single-Tier Sleeping Bunks:\n(a) Pre fabricated single sleeping bunk made of MS hollow section of size 25 mm x 25 mm x 2.65 mm thick and angle iron of size 40 mm x 40 x 5 mm including cushioned platform as per CE 15 Corps Drawing No 3534/SINGLE SLEEPING BUNK/001 SHEET 1/1 dt 25 May 17 attached with this quotation. Cleat of MS rectangular box of size 25 mm x 25 mm x 75 mm long to be welded. Angle Iron frame will be fixed to hollow section vertical frame with nuts and bolts. The bunk should have provisions to place a removable type mattress of size 1830 mm x 910 mm to angle iron frame with adequate holes pre drilled in the frame. The outer size of the bunks will be 1840 mm x 920 mm horizontally and 750 mm x 920 mm vertically. All MS pipes shall be medium grade ISI mark and shall be provided with two coats of superior quality Black spray paint over a coat of red oxide primer of Make Johnnson & Nicholson (India Ltd), Nerolac (Paints) and Asian (Paints) on all steel surfaces. \n\n(b) Puff Mattress:\nSingle piece cushion made of 100 mm thick “PUF” foam of density 40 Kg / cum as applicable for sleeping cushions of standard make Sleepwell/ Kurlon of size 1830 mm x 910 mm. The PUF foam shall be pasted on 12 mm thick Ply-Wood (BWR) of make Kitply / National / Greenply. The ‘PUF’ foam pasted on the ply-wood shall be enclosed vinyl coated laminated upholstery cloth (Rexene) for attached in RFP of Drawing attached as Appendix 'V'.
13	3.01	Uri/Mohura	item 10	22	Nos
14	3.02	Naugam	item 11	4	Nos
15	4	Modified steel tubular pole duly painted with anti corrosive silver coated paint made of MS structural steel tube section having four segment of different bore as described in technical Specification as per Appx 'N' of RFP Part II.
16	4.01	Uri/Mohura	item 12	63	Nos
17	4.02	Naugam	item 13	21	Nos
18	4.03	Boniyar/Rampur	item 14	21	Nos
19	4.04	Pattan	item 15	21	Nos
20	5	Pre fabricated Pump Shed of size 2.4M X 2.4M and height 1.8M at front side and 1.60 M at rear side above FFL 300 mm hight with Angle Iron of 50x50x6 mm for all column , Purlin and rafter welded with connecting MS Plates 6mm thick (MS Plates size for bottom of the column 200mmx200mm and top of the column and conneting at the purling to column with cleats) with sufficiant Nut and Bolts including supply of 4 Nos of CGI sheet 810 X3050 mm , 0.63mm thick with galvanized of 375 GSM (Galvanisation as per IS-429) and 80 Nos of 'J' Hooks for fixing of CGI Sheet and All steel structure will be painted with two coats of synthetic enamel paint of colour Brush Green over a coat of red oxide primer complete. Sketch Appendix 'O' to IV RFP .
21	5.01	Uri/Mohura	item 16	5	Nos
22	5.02	Naugam	item 17	5	Nos
23	5.03	Boniyar/Rampur	item 18	5	Nos
24	6	Puff Mattress: Single piece cushion made of 100 mm thick “PUF” foam of density 40 Kg / cum as applicable for sleeping cushions of standard make Sleepwell/ Kurlon of size 1830 mm x 910 mm. The PUF foam shall be pasted on 12 mm thick Ply-Wood (BWR) of make Kitply / National / Greenply. The ‘PUF’ foam pasted on the ply-wood shall be enclosed vinyl coated laminated upholstery cloth (Rexene)
25	6.01	Uri/Mohura	item 19	14	Nos
26	7	Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 4300mm length including detachble 'Y' arm. The length of one arm 800mm sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/ Picket /001 Sheet 1/1 dt 05 Sep 2018 and all other Technical Specification as per Appendix 'A' 04 NO 12mm dia holes will be provided on angle post and 'Y' arm each as shown in drg att for fixing of 'Y' arm nut bolt. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge. Drawing attached as Appendix ‘P’
27	7.01	Rampur/Boniyar	item 20	2280	Nos
28	8	Angle iron Post made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 2100mm long single plece, having sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/ Picket /001 Sheet 1/1 dt 05 Jul 2013. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge. Drawing attached as Appendix ‘Q’
29	8.01	Uri/Mohura	item 21	140	Nos
30	8.02	Naugam	item 22	89	Nos
31	8.03	Rampur/Boniyar	item 23	166	Nos
32	8.04	Ziran/Gulmarg	item 24	3	Nos
33	9	Angle iron Strut made of structural steel angle section, grade E-250, Type A designation Fe- 410W of IS 2062 : 2006, of dimensions 65x65x 6mm, 2700mm long single piece, having sectional weight 5.8 Kg per mtr confirming to HQ 15 Corps drawing No 3534/LC /Picket/002 Sheet 4/5 dt 24 Jul 2009. All angle iron Strut will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of bush green synthetic enamel spray paint, Except bottom 600mm length. Finished angle iron post shall be free from burbs and sharp edge. Drawing attached as Appendix ‘R’
34	9.01	Uri/Mohura	item 25	171	Nos
35	9.02	Naugam	item 26	83	Nos
36	9.03	Rampur/Boniyar	item 27	370	Nos
37	9.04	Ziran/Gulmarg	item 28	44	Nos
38	10	Supply of Pre-Fabricated Store Shelter made up of Steel Structure of size 18.30 x 6.10 x2.95m (Truss Bottom) as per HQ 15 Corps drawing No 3534/Store/001/Sheet 1/2 and 2/2 dt 10 Apr 2018 and all other technical specification and store list attached in RFP of Drawing attached as Appendix ‘S’
39	10.01	Uri/Mohura	item 29	1	Nos
40	11	Steel window 1200x600mm shall be provided. The main fram work shall be MS channel 'U' sec 25x25x5mm (12mm grove x 6mm thick), shulters of size 0.06x0.30m and 6mm thick will be fixed for smoothly sliding within MS 'U' channel. Two bow handles are also provided for easy opening and shifting the shulters. Externally Acrylic sheet bottom hung shutters will be provided incl iron mongery etc completed incl painting.
41	11.01	Uri/Mohura	item 30	12	Nos
42	12	Two-Tier Sleeping Bunks:\n(a) MS pipe two tier sleeping bunks as per CE 15 Corps Drawing No 3534/ OW/15 Corps / Two Tier Sleeping Bunk/ sheet 1/1 dated 14 Jul 2010 attached with this TS. A detachable ladder made up with 20 mm MS pipe with four steps to be provided in each bunk. Male / female MS rectangular box of size 50 mm x 25 mm x 75 mm long to be welded, two side protector bars of 15 mm dia MS pipe on top bunk to be welded as per details shown in drawing. The outer size of the bunk will be 1970 mm x 950 mm horizontally and 1950 mm x 950 mm vertically. The Bunk should have provision to place a removable type matress of size 1830 mm x 910 mm to angle iron frame with adequate holes pre drilled in the frame. All MS pipes shall be medium grade ISI mark and provided with two coats of superior quality Black Spray paint over a coat of red oxide primer.\n\n(b) Two Nos single piece cushion made of 100 mm thick “PUF” foam of density 40 Kg/cum as applicable for sleeping cushions to be provided with each bunk removable type of standard make : Sleepwell/Kurlon of size 1830 mm x 910 mm. The Puf Foam pasted on the ply - wood shall be enclosed vinyl coated laminated upholtery cloth (Rexene) for attached in RFP of Drawing attached as Appendix ‘T’
43	12.01	Uri/Mohura	item 31	12	Nos
44	13	Per fabricated steel door of size 1.20m x 1.80 m made out of 2 mm thick MS sheet welded/Riveted on 45 x 45 x6 mm ISA shutter frame with diogonal bracings with same angle. Frame fitted on door column 2.10 Mtr long made up of equal angle 50 x 50 x 6mm with 03 Nos Hinges and 03 Nos hold fasts incl requsite iron mongery. Door shall be painted with two coat of Synthetic enemal paint OG color over one coat of red oxide primer.
45	13.01	Uri/Mohura	item 32	12	Nos
46	14	Single piece cushion made of 100 mm thick “PUF” foam of density 40 Kg / cum as applicable for sleeping cushions of standard make Sleepwell/ Kurlon of size 1830 mm x 910 mm. The PUF foam shall be pasted on 12 mm thick Ply-Wood (BWR) of make Kitply / National / Greenply. The ‘PUF’ foam pasted on the ply-wood shall be enclosed vinyl coated laminated upholstery cloth (Rexene) of specification
47	14.01	Uri/Mohura	item 33	18	Nos
48	15	Straining Y-Arm for supporting top PTCC: Material : MS Angle Size : 50x50x5mm as per IS 1852. Coating : Hot dip galvanized to Min 350 GSM as per IS 4759/2629, Length of 1 Arm is 750mm,outer dia of 63 mm of sleeve cap will be fitted on the top of the fence post. Straining Y-Arm will manufactured as per drawing No 3534/ACF/LC/002/SHEET 2/3 dt 10 Apr 18 Straining Y Arm will be installed at every 30 mtrs except intermediate arm post.
49	15.01	Uri/Mohura	Item 34	532	Nos
50	15.02	Boniyar/Rampur	Item 35	532	Nos
51	16	Intermediate Y-Arm for supporting top PTCC: Material: MS Angle Size :50x50x3mm as per IS 1852 Coating :Hot dip galvanized to Min 350 GSM as per IS 4759 / IS 2629.Length of 1 Arm is 750 MM , Angle between the two arms is 120 degree , with a support steel strip of 25x5 mm (galvanized as per IS 4759) and fixed with mushroom head bolt and nut (M8x25mm).Intermediate Y-Arm will manufactured as per drawing No 3534/ACF/LC/003/SHEET3/3 dt 10 Apr 18.attached Inner dia 80mm of cap bolted on top of the fence post.1 Intermediate Y Arm will be installed at every post except the posts with Straining Y arms
52	16.01	Uri/Mohura	Item 36	650	Nos
53	16.02	Boniyar/Rampur	Item 37	650	Nos
54	17	PTCC Rod 12mm dia MS Rod Suitable arrangement be made on fence post for holding of PTCC of PTCC rod.
55	17.01	Uri/Mohura	Item 38	629	Nos
56	17.02	Boniyar/Rampur	Item 39	629	Nos
57	18	Mushroom Head Bolt with breakable head safety nut (M8X120) : Material : SS
58	18.01	Uri/Mohura	Item 40	753	Nos
59	18.02	Boniyar/Rampur	Item 41	753	Nos
60	19	Collapsible Galvanised Wire Mesh crate of sixe 5 ft (length) X 2 feet (width) X 4 feet (hight).
61	19.01	Uri/Mohura	Item 42	50	Nos
62	20	ISMB 150 (RSJ 150x75mm) 3.4m long conforming to IS 808-1973,
63	20.01	Uri/Mohura	Item 43	56	Nos
64	20.02	Naugam	Item 44	36	Nos
65	20.03	Boniyar	Item 45	28	Nos
66	21	ISMB 150 (RSJ 150x75mm) 1.5m long conforming to IS 808-1973,
67	21.01	Uri/Mohura	Item 46	18	Nos
68	21.02	Naugam	Item 47	9	Nos
69	21.03	Boniyar	Item 48	7	Nos
70	22	ISMB 200 (RSJ 200x100mm) 5.4m long conforming to IS 808-1973,
71	22.01	Uri/Mohura	Item 49	32	Nos
72	23	ISMB 150 (RSJ 150x75mm) 3.75m long conforming to IS 808-1973,
73	23.01	Uri/Mohura	Item 50	12	Nos
74	23.02	Rampur/Boniyar	Item 51	175	Nos
75	24	ISMB 150 (RSJ 150x75mm) 3.70m long conforming to IS 808-1973,
76	24.01	Uri/Mohura	Item 52	12	Nos
77	25	ISMB Girder 150x75mm 4.80m long conforming to IS 808-1973,
78	25.01	Naugam	Item 53	14	Nos
79	26	ISMC 75 X40mm 3.4 m long welded with plate 250x250x6mm on one side with holes drilled conforming to IS 808-1973.
80	26.01	Uri/Mohura	Item 54	84	Nos
81	26.02	Naugam	Item 55	54	Nos
82	26.03	Boniyar	Item 56	42	Nos
83	27	Precast cement concrete lintel in door of length 1.20 m, width 400 mm and 200 mm thick, Type B-1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 including necessary form work and the reinforcement with TMT bars should be of Main bars with 12 mm dia bars, 04 Nos and Stirrups with 8 mm dia bars,09 Nos including fabrication with binding wire etc.
84	27.01	Uri/Mohura	Item 57	14	Nos
85	27.02	Naugam	Item 58	9	Nos
86	27.03	Boniyar	Item 59	7	Nos
87	28	MS rack of size 1.22m x 0.61m x 1.65m will be supplied alongwith each PD. Vertical legs and frame of the racks shall be fabricated out of MS slotted angle iron 65 x 35 x 3mm thick with 2 middle supports of FI 40x 6mm (1.88Kg/RM) in horizontal frame of racks. The rack will have 2 shelves with 12mm thick ply wood (Make : Kitply / Assam Gold/ Green Ply / Archid). The plywood will be fixed with frame with the use of nuts and bolts of 12mm dia. The horizontal frame and vertical legs of the racks will be jointed with 12mm dia nut and bolt and angle iron cleats. Drawing attached as Appendix ‘U’
88	28.01	Uri/Mohura	Item 60	42	Nos
89	28.02	Naugam	Item 61	27	Nos
90	28.03	Boniyar	Item 62	21	Nos
91	29	Covered entrance to the door fabricated out of 40mm dia MS pipe an covered with CGI Shhets 0.63mm thick
92	29.01	Uri/Mohura	Item 63	14	Nos
93	29.02	Naugam	Item 64	9	Nos
94	29.03	Boniyar	Item 65	7	Nos
95	30	Supply of Class 1 double twisted, Zinc coated MS Gabion boxes of size 3m x 1m x 1m having following specifications :-\n(a) Mesh size - 80 x 100 mm\n(b) Number of diaphragms - 02 Nos\n(c) Mesh wire size - 2.40 mm\n(d) Mesh wire dia – 3.00 mm\n(e) Edge / Selvedge dia – 3.90 mm\n(f) Lacing wire dia – 2.20mm\n(g) Minimum qty of lacing wire – 3% of total weight of gabion basket supplied.
96	30.01	Uri/Mohura	Item 66	815	Nos
97	30.02	Naugam	Item 67	632	Nos
98	30.03	Boniyar/Rampur	Item 68	400	Nos
99	31	Angle iron picket (ISA 50x50x6mm) 2.70m long confirming to IS 2062-1964 including two coats of synthetic enamel paint OG over a coat of red oxide primer painting etc.
100	31.01	Boniyar/Rampur	Item 69	425	Nos
101	32	Pre fabricated Man hole cover 6' x 4' made of ISA 40x40x6mm frame and MS black Sheet of 1.48mm thick complete including two coats of red oxide primer on inside surfaces and two coats of Black Japan paint over a coat of red oxide primer on top surfaces.
102	32.01	Boniyar/Rampur	Item 70	1	Nos
103	32.02	Pattan	Item 71	1	Nos
104	33	False ceiling made of 40 mm thick PUF insulated panel with 0.63 mm thick hot dipped galvanised steel sheet on both side supported with held of inverted Tee Sec 50X50X50 mm thick and L Sec of 50X50X5mm thick fixed to truss.
105	33.01	Naugam	Item 72	50	Sqm
106	34	Supply of fire Resistant FRP set will have 256 sqft FRP sheet of thickness not less than 4mm with ISI mark each set will consist of following Items:-\n(a) FRP sheet of size 4ft x 2ft with thicness not less than 4mm-32 Nos\n(b) 'U' shape MS hook of 2 inch (length) X 1 inch (width) x 2mm thickness to be proved separately with suitabe size nuts & bolts for fixing FRP sheet with walls - 96 Nos
107	34.01	Uri/Mohura	Item 73	1	Set
108	34.02	Boniyar/Rampur	Item 74	1	Set
109	35	Galvanised Steel Barbed Wire, ISI marked A-5 designation for Galvanised steel barbed wire for fencing shall conform to IS 278 – 1978. The barbed wire shall consist of two line wire 2.24 mm dia (Tensile strength 390 – 590 N/mm2 minimum breaking load of complete barbed wire 3kN), one or both containing 2.00 mm dia barbs at 75 mm centre to centre and weighing 97 to 106 Kg per Km. The barbs shall have a length of not less than 13 mm and not more than 18 mm. The line and point wires shall be circular in section, free from scales and other defects and shall be uniformly galvanised. The line wire shall be in continuous length and shall not contain any welds other than those in the rod before it is drawn.\n The galvanising shall conform to the requirement as laid down for light – coated wire of IS 4826 – 1968 `Specification for galvanised coating on round steel wires. Barbing wire(line) shall be hard type heavy coated (230 gm/sq m) and barbing wire (point) shall be hard type light coated (70 gm/sq m). The Galvanised barbed wire will be in bundles of 25 to 30 Kgs each and the bundles will be packed in hessian cloth, the bundles should be strong enough to withstand rough handling during transportation. Every reel of barbed wire shall be marked legibly with BIS standard make the name of manufacturer, the type of barbed wire, the diameter of the line and point wires, barb spacing and length and/or mass of the reel.
110	35.01	Naugam	Item 75	12	MT
111	35.02	Boniyar/Rampur	Item 76	21	MT
112	35.03	Ziran/Gulmarg	Item 77	10	MT

Supply Of Op Works Stores, Uri, Naugam, Baramulla, Rampur, Buniyar, Gulmarg,-Jammu And Kashmir

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us