Military Engineer Services-MES has published Provision Of Covered Shed For Furniture At Bso Yard, Guard Bar For Over Head Tank Of Jcos/Or Md Accn At Lancer Line, Toilet Block Near Unit Mandir Of 811 Engr Regt Ongc (Ta) And Steel Sink In Kitchen Of Bldg No P-144/01 To 04, 06 & 08 Sf Accn At Lancer Li. Submission Date for this Tender is 14-02-2020. Shed Construction Tenders in GE Army Baroda Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Feb-2020 | CHANGE IN CRITICAL DATES | Date | 14-02-2020 |
| Name of Work: PROVN OF COVERED SHED FOR FURNITURE AT BSO YARD, GUARD BAR FOR OVER HEAD TANK OF JCOs/OR MD ACCN AT LANCER LINE, TOILET BLOCK NEAR UNIT MANDIR OF 811 ENGR REGT ONGC (TA) AND STEEL SINK IN KITCHEN OF BLDG NO P-144/01 TO 04, 06 & 08 SF ACCN AT LANCER LINE UNDER GE (ARMY) BARODA | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavating in post holes in soft/ loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and all as specified and directed | 18 | Each | |
| 2 | 2 | M&L PCC 1:4:8 type D2 using 40mm graded stone aggregates as in foundation, filling and mass concrete. | 8.9 | Cum | |
| 3 | 3 | S&F ERW tubes or Induction butt weld M.S. tube welded with gusset plates and fixed with nut and bolts ans with spl vouchers and all as specified and directed | 5525 | Kgs | |
| 4 | 4 | M&L for painting steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel (ordinary tint) paints over a coat of red oxide priming paint including preparation of new or previously untreated surfaces all as specified and directed. | 200 | Sqm | |
| 5 | 5 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified and directed | 350 | Sqm | |
| 6 | 6 | S&F Pre-painted galvatume aluminium zinc coating GI based GI plained steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in cladding to wall fixed with self tapping screws as specified and directed | 15 | Sqm | |
| 7 | 7 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and as directed. | 300 | Sqm | |
| 8 | 8 | Removal of excavated soil to a distance not exceeding 50m and depositing where directed at a level n exc.1.5 m above the starting point complete all as specified and directed.\n\n | 132 | Cum | |
| 9 | 9 | M&L for Hard core of gauge n. exc.63 mm of Broken stone or boulders, deposited spread and levelled in layer n.exc 15cm thick,watered and rammedto a true surface complete all as specified and as directed. | 29 | Cum | |
| 10 | 10 | M&L for 100mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed. | 280 | Sqm | |
| 11 | 11 | M&L for PCC 1:2:4 type B-2,using 40 mm graded stone aggregate as in flooring 75 mm thick finished even and smooth without using extra cement and making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.\n\n | 280 | Sqm | |
| 12 | 12 | Excavation in trenches not exc 1.5m wide and not exc 1.50 mtrs in depth for foundations etc n.exc 10 sqm on plan and getting out in soft/loose soil. | 25 | Cum | |
| 13 | 13 | Returning filling in including spreading levelling and well ramming in layers n.exc 25cm in soft/loose soil complete all as specified | 7 | Cum | |
| 14 | 14 | Material & labour for brick work with fly ash bricks built in CM (1:6) straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed. | 30 | Cum | |
| 15 | 15 | M/L rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed. | 55 | Sqm | |
| 16 | 16 | Preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of primer complete all as specified. | 55 | Sqm | |
| 17 | 17 | M&L for Framed work such as grills, grating,etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars,barred iron doors,ladders,framed balusters,walk ways railings, frame work of water tanks and similar works confirming to Fe 290 Gde-E-165 all as specified and as directed.. | 8222 | Kg | |
| 18 | 18 | Dismantling of existing GI Tubing inlet and outlet of following size from the OH Tank complete . | |||
| 19 | 18.01 | 40mm dia bore | 75 | RM | |
| 20 | 18.02 | 25mm dia bore | 150 | RM | |
| 21 | 18.03 | 20mm dia bore | 225 | RM | |
| 22 | 18.04 | 15mm dia bore | 150 | RM | |
| 23 | 19 | Dismantling of existing Gun Metal globe or gate valve of following size inlet and outlet from the OH Tank connection complete . | |||
| 24 | 19.01 | 15mm dia | 120 | Each | |
| 25 | 19.02 | 20mm dia | 140 | Each | |
| 26 | 19.03 | 25mm dia | 20 | Each | |
| 27 | 19.04 | 40mm dia | 20 | Each | |
| 28 | 20 | Dismantling of existing rotational moulded polyethylene OH Tank of following capacity after disconnection of inlet and outlet pipe complete . | |||
| 29 | 20.01 | 500 Ltrs | 70 | Each | |
| 30 | 20.02 | 750 Ltrs | 70 | Each | |
| 31 | 20.03 | 1000 Ltrs | 10 | Each | |
| 32 | 21 | Re fixing of serviceable GI tubing of following size obtained from dismantling to the OH Tank including new fittings complete all as specified and as directed. | |||
| 33 | 21.01 | 40mm dia bore | 40 | RM | |
| 34 | 21.02 | 25mm dia bore | 80 | RM | |
| 35 | 21.03 | 20mm dia bore | 120 | RM | |
| 36 | 21.04 | 15mm dia bore | 80 | RM | |
| 37 | 22 | S & F to wall GI steel tubing medium grade including all fittings such as Tees, elbow, bends etc for following bore of pipe complete all as specified : | |||
| 38 | 22.01 | 40mm dia bore | 35 | RM | |
| 39 | 22.02 | 25mm dia bore | 70 | RM | |
| 40 | 22.03 | 20mm dia bore | 110 | RM | |
| 41 | 22.04 | 15mm dia bore | 114 | RM | |
| 42 | 23 | Re fixing of serviceable Gun Metal globe or gate valve from dismantled items of following size to the OH Tank complete all as specified and as directed.complete. | |||
| 43 | 23.01 | 15mm dia | 30 | Each | |
| 44 | 23.02 | 20mm dia | 40 | Each | |
| 45 | 23.03 | 25mm dia | 10 | Each | |
| 46 | 23.04 | 40mm dia | 10 | Each | |
| 47 | 24 | Re fixing of serviceable OH Tank from dismantled items of following capacity complete all as specified and as directed. | |||
| 48 | 24.01 | 500 Ltrs | 60 | Each | |
| 49 | 24.02 | 750 Ltrs | 60 | Each | |
| 50 | 24.03 | 1000 Ltrs | 6 | Each | |
| 51 | 25 | S&F Rotational moulded polythylene water storage tanks double layered (cylinderical vertical with close top) 500 ltr capacity hoisted and fixed in position complete all as specified and as directed. | 11 | Each | |
| 52 | 26 | S&F Rotational moulded polyethylene water storage tanks of capacity 750 Ltrs double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I | 10 | Each | |
| 53 | 27 | S&F Rotational moulded polyethylene water storage tanks of capacity 1000 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I | 4 | Each | |
| 54 | 28 | S&FGun-metal, globe or gate valves of size 15mm dia, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed by Engr-in-charge. | 90 | Each | |
| 55 | 29 | S&FGun-metal, globe or gate valves of size 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed by Engr-in-charge. | 100 | Each | |
| 56 | 30 | S&FGun-metal, globe or gate valves of size 25mm dia, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed by Engr-in-charge. | 10 | Each | |
| 57 | 31 | S&FGun-metal, globe or gate valves of size 40mm dia, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed by Engr-in-charge. | 10 | Each | |
| 58 | 32 | Excavation in trenches n exc 1.5M wide and n exc 1.5M in depth for foundation etc n.exc 10 sqm on plan and getting out in any type of soil all as specified and as directed. | 8 | Cum | |
| 59 | 33 | M&L for reinforced cement concrete M-20 (20mm graded stone aggregatea) as in foundation ,footings and plinth beams etc all as specified and as directed. | 1.5 | Cum | |
| 60 | 34 | M&L for reinforced cement concrete M-20(20mm graded stone aggregate) as in columns ,pillars,posts etc all as specified and as directed. | 1.2 | Cum | |
| 61 | 35 | M&L for reinforced cement concrete M-20(20mm graded stone aggregate) as in ,beam, lintel , seismic and other similar works etc all as specified and as directed. | 1.5 | Cum | |
| 62 | 36 | M&L for reinforced cement concrete M-20 (20mm graded stone aggregate) as in roof beams ,roof slabs roof facia etc all as specified and as directed. | 1.1 | Cum | |
| 63 | 37 | M&L for steel form work to sides of concrete foudation, base of columns, and raft beams.plinth beametc. on flat faces all as specified and as directed. | 7 | Sqm | |
| 64 | 38 | M&L for steel form work to sides of columns, of rough finished surface of concrete flat faces all as specified and as directed. | 13 | Sqm | |
| 65 | 39 | M&L for steel form work to sides and soffits of floor or roof beam hauchings , lintels, cantilevers,etc. of rough finished surface of concrete flat faces all as specified and as directed. | 12 | Sqm | |
| 66 | 40 | M&L for steel form work to soffits of suspended such as roof slabs, floor slabs, landings and similars works for flat rough surfaces all as specified and as directed. | 10 | Sqm | |
| 67 | 41 | M&L for steel form work to edges of concrete exc 10cm but n. exc.20cm wide all as specified and as directed. | 10 | RM | |
| 68 | 42 | S&F for MS steel TMT bars 10mm dia and over cut to length ,bent to shape required including cranking bending for hooping for column ,hooking ends and bindings with and including mild steel wire (annealel)not less than 0.9mm dia. all as specified and as directed. | 380 | Kg | |
| 69 | 43 | S&F for MS steel TMT bars 5 mm dia and over upto and including 10mm dia as in stirrups cut to length ,bent to shaprequired including cranking bending for hooping for column ,hooking ends and bindings with and including mild steel wire (annealel)not less than 0.9mm dia. all as specified and as directed. | 80 | Kg | |
| 70 | 44 | M&L for Brick work with sub class `B`bricks straight or curved on plan .exceeding 6 mtr mean radious,built in CM 1:6 all as specified and as directed. | 6 | Cum | |
| 71 | 45 | M&L for rendering 15mm thick on the fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified and as directed. | 20 | Sqm | |
| 72 | 46 | M&L for rendering 15 mm thick on the fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed. | 8 | Sqm | |
| 73 | 47 | M&L for rendering 10mm thick on ceiling in cm (1:3) finished even and smooth without using extra cement complete all as specified and as directed. | 8 | Sqm | |
| 74 | 48 | Supply and filling of approved earth from out side of MD land filling floors or paving laid in layer n.exc 15 cm thick , spread, levelled and rammed including watering complete all as specified and as directed. | 6 | Cum | |
| 75 | 49 | M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. | 5 | Sqm | |
| 76 | 50 | M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in leveling coarse to receive floor finished etc.complete all as specified and as directed. | 5 | Sqm | |
| 77 | 51 | M&L for non skid ceramic coloured tiles 300mm x 300mm x 7mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed. | 5 | Sqm | |
| 78 | 52 | M&L for 15mm thick screed bed in CM (1:6) to receive floor finishes complete all as specified and as directed. | 5 | Sqm | |
| 79 | 53 | M & L for glazed ceramic coloured wall tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including 10mm thick rending in CM : 1:4 complete all as specified and directed. | 74 | Sqm | |
| 80 | 54 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebeats including jointing cleat for fixing etc, complete all as specified and directed by Engineer-in-Charge | 2 | Kg | |
| 81 | 55 | S&F for 3 mm thick figure glass pin head type and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified and as directed. | 0.4 | Sqm | |
| 82 | 56 | S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheets, reinforced with MS square tube, supplying and fixing in opening as per specification and drawiing the rate is inclusive of fixing door frame to the wall using 75/100mm long MS screws complete. | 7 | RM | |
| 83 | 57 | S&F for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat rounded plain colour PVC :C: channel having a PVC sheet strip & 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert to top rail & bottom rail. Paneling of plain colour sheet to be fitted in the MS frame welded/sealed to athe satiles & rails with suitbale PVC sheet beadding and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawings complete | 2.5 | Sqm | |
| 84 | 58 | S&F for stainlees steel butt hinges 100mm medium weight all as specified and as directed. | 6 | Each | |
| 85 | 59 | S&F for aluminum handles cast type anodized, 150mm long all as specified and as directed. | 4 | Each | |
| 86 | 60 | S&F for aluminum anodized barrel tower bolt of extruded section and fixed 150mm long all as specified and as directed. | 4 | Each | |
| 87 | 61 | S&F for aluminum alloy anodized sliding door bolt with hasp, staple and fixing clip of sheet cast or extruded section and fixing bolts etc complete 200mm long all as specified and as directed. | 2 | Each | |
| 88 | 62 | M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection etc complete all as specified and as directed. | 9 | Sqm | |
| 89 | 63 | S&F for Vitreous China wash down water closet pan (pedestal pattern) white with fixing bolts and trap, including connection to drain or outgoing pipes and to flush pipes complete all as specified and as directed. | 1 | Each | |
| 90 | 64 | S&F for vitreous china urinal bowel type (Back or corner wall type) complete including providing and fixing plugs. Bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screw pointing around urinal back in cement fixing automatic flushing cistern with brocket. Flush pipe grating and for discharge pipe complete all as specified and as directed.. | 1 | Each | |
| 91 | 65 | S&F for vitreous china Wash hand basin, white , flat back size 550x400 mm incl brackets and CP waste coupling complete all as specified and as directed. | 1 | Each | |
| 92 | 66 | S&F for 600mm x 450mm beveled edge mirror of selected quality mounted on 6mm thick AC building board or commercial plywood all as specified and as directed. | 1 | Each | |
| 93 | 67 | S&F for pillar tap cast copper alloy with capstan heads screwed down high pressure, with lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for 15 mm bore pipe complete all as specified and as directed. | 1 | Each | |
| 94 | 68 | S&F for 10 lit capacity PVC valveless,syphonic action type flushing cistren low level ,white with inlet ball valve,float and handle including brackets,flush pipe 32 mm dia complete all as specified and as directed. | 1 | Each | |
| 95 | 69 | S&F for PVC Zet for EWC with PVC pipe and check nut suitable for 15 mm nominal bore of pipe complete all as specified and as directed. | 1 | Each | |
| 96 | 70 | S&F for ball brass valve high pressure with polythene float and flynut screwed for iron pipe or brass pipe or ferrule and fixed for 20mm bore dia of pipe complete all as specified and as directed. | 1 | Each | |
| 97 | 71 | S&F for CP bib taps cast copper alloy with crutch or butter fly handle screwd for 15mm bore dia iron pipe or for brass ferrule and fixed complete all as specified and as directed. | 1 | Each | |
| 98 | 72 | S&F for CP stop/angle valve 15mm dia cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends of iron pipe or for unions and fixed complete all as specified and as directed. | 3 | Each | |
| 99 | 73 | S&F for brass chromium plated tubular towel rail 20mm dia ''D'' Type 60cm long between flanges complete all as specified. | 1 | Each | |
| 100 | 74 | S&F for PTMT grating suitable for size 150mm x 150mm cpmplete all as specified and as directed. | 2 | Each | |
| 101 | 75 | M&L for preparation of new surfaces of any description and applying two coats of cement base paint on wall over a coat of alkaline resitant primer complete all as specified and as directed. | 20 | Sqm | |
| 102 | 76 | M&L for preparing newly plastered surface of ceiling and applying three coat of white wash complete all as specified and as directed. | 8 | Sqm | |
| 103 | 77 | PVC (SWR) pipes, 100 mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches fixed complete | 1.5 | RM | |
| 104 | 78 | PVC (SWR) pipes, 75 mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches fixed complete | 2 | RM | |
| 105 | 79 | PVC (SWR) bends with access door suitable for 100/75 mm mm bore pipe fixed complete. | 2 | Each | |
| 106 | 80 | S&F for Salt glazed stone were gully traps squire of size 150mm x 150mm all as specified and as directed. | 2 | Each | |
| 107 | 81 | M&L for water proofing treatment to roof slab by applying one coat of bituminous/poly merized primer confirming to IS-3384 i.e 0.30 litre/sqm and laying actetic poly propylene (APP) modified membrane pre febricated reinforced with non wovan ployester of minimum 3.50 kg/sqm 3mm thick (minimun) with minimum 75mm side overlap and minimum 100mm end overlaps and applying one coat of bituminous aluminium paint over APP membrane complete all as specified and directed. | 9.5 | Sqm | |
| 108 | 82 | Material & labour salt glazed stone ware drain pipes laid in trenches and jointed as specified internal diameter of pipe 150 mm | 4 | RM | |
| 109 | 83 | M & L concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position. | 4 | RM | |
| 110 | 84 | M&L machine cut kota stone slab flooring 18-20mm thick Size not less than 550 x 550 mm over base laid and jointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. | 24 | Sqm | |
| 111 | 85 | M&L for 16-18mm thick green marble in one piece machine cut as in cooking plate form,steps,window cills and like set and jointed in grey cement slurry and pointed in coloured cement (1:2) using marble dust with admixture of pigment to make with marble shade, laid over and including 15mm thick screed bed in cement mortor 1:4 complete all as specified. | 12 | Sqm | |
| 112 | 86 | Rounding to edges of stone slabs such as steps cooking platefrom and other similar situations complete all as specified | 22 | RM | |
| 113 | 87 | Cutting chases for concelled pipe where required and pointing in cement mortor 1:3 etc in brick ball for bore of pipe 15/20 mm complete all as specified. | 10 | RM | |
| 114 | 88 | S & F in repairs CP bib tap fancy type 15 mm bore cast copper alloy with round operating knob screw down screwed for iron pipe complete all as specified. | 14 | Each | |
| 115 | 89 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. | 60 | Sqm | |
| 116 | 90 | S&F sinks made of stainless steel 1mm thick with plugs, washers, waste cupling and PVC wastes pipe including bedding in Cement Mortar to dwarf wall or including fixing cantilever brackets &connecting unions to pipe overall size 495 mmx 420 mm bowl size 410 mm x 330 mm 160 mm all as specified. | 7 | Each | |
| 117 | 91 | M&L point wiring complete with 1.5 sqmm copper conductor cable (multistrand) PVC insulated and unsheathed cable 1100 Volts grade, including concealed PVC conduit of size not less than 20 mm dia , including all bends and tees of same size, including cutting chases in wall/ceiling/roof clamping conduit in cut chases of wall/ceiling/roof and making good to disturbed surfaces including painting/ whitewashing/ colourwashing/ distempering etc so as to match with the existing surfaces where required with sunken type pressed steel / welded MS terminal boxes made out of 1.2 mm MS sheet, and with 3 mm thick plastic laminated sheet cover with one 1.5 sqmm copper conductor solid PVC insulated and unsheathed cable 1100 Volts grade, as earth wire connected to the common earth dolly as directed. | |||
| 118 | 91.01 | One light point controlled by one switch 6 amp one way | 3 | Point | |
| 119 | 91.02 | One exhaust fan point controlled by one switch 6 amp one way | 1 | Point | |
| 120 | 92 | S& F MCB DB factory made IP 41 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc completed. | |||
| 121 | 92.01 | SPN 04 way | 1 | Each | |
| 122 | 93 | S&F MCBs 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB | |||
| 123 | 93.01 | MCB SPN 5 to 40 Amps. | 1 | Each | |
| 124 | 93.02 | MCB SP 5 to 40 Amps | 1 | Each | |
| 125 | 94 | M&L switch piano flush type single pole, one way 6amp . | 4 | Each | |
| 126 | 95 | S & F lamp holder for CFL PVC/Polycarbonatetype with cord grip including Supply and fixing of of 7 W LED Bulb with system lumen output of 600 lumens. System Efficacy should be > 85lm/ W. TheLamp Should have Cool Daylight Color temp of 6500K . Lamp should be supplied with E27 Holder. Similar to Philips Ace Saver. Make : Cona/Anchor. | 2 | Each | |
| 127 | 96 | S & F ceiling rose 65x50mm three terminals . 250/230 Volts | 1 | Each | |
| 128 | 97 | M & L for sub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including 20 mm dia PVC conduit pipe, accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed all as directed.\nNote: Three runs of conductor and one run of PVC conduit shall be measured as one length. | 12 | RM | |
| 129 | 98 | S & F exhaust fan 250 mm sweep, low noise, complete with louvers. Make : Bajaj/Havells/CG/Khaitan. | 1 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
