| 1 | 1 | Dismantling carefully wooden walling, flooring of ceiling and stacking dismantled materials as directed.\n | 1 | 40 | M2 |
|---|
| 2 | 2 | Labour for Chipping of concrete surface before taking up Plastering work.\n | 2 | 100 | M2 |
|---|
| 3 | 3 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.\n | | 60 | M2 |
|---|
| 4 | 4 | Taking out existing partition/ceiling of particle board, masonite board, ply board,soft board etc. of any thickness and refixing same in new position with necessary clamps making holes in walls, floor, roof and mending damages.\n | | 30 | M2 |
|---|
| 5 | 5 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. \n(i) With 1:6 cement mortar\n(b) 20 mm thick plaster\n | | 150 | M2 |
|---|
| 6 | 6 | Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge. \nb)25mm thick\n | | 5 | M2 |
|---|
| 7 | 7 | (A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete. \nIi)Sal : Local\n | | 0.3 | M3 |
|---|
| 8 | 8 | (A) Partition of commercial ply as per design fitted and fixed complete. \nIn 1st floor \nii)6mm thick \n\n | | 12 | M2 |
|---|
| 9 | 8.1 | iii)12mm thick | | 20 | M2 |
|---|
| 10 | 9 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.\n | | 60 | M2 |
|---|
| 11 | 10 | M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete).\n | | 40 | M2 |
|---|
| 12 | 11 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or\nsimilar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. \na)35mm thick shutter single leaf. | | 9 | M2 |
|---|
| 13 | 12 | A) Supplying & laying of approved brand of scratch proof, semi flexible P.V.C. blended homogeneous marble Vinyle flooring in tiles conforming to IS:3461, fixing with synthetic acrylic adhesive after preparing the floor, levelling & smothaning when necessary with suitable putty, as per the design & instruction of the Engineer-in-charge. \n2mm thick\n | | 60 | M2 |
|---|
| 14 | 13 | Godrej Hydraulic door closer fitted and fixed complete. \nA)Heavy type | | 3 | Each |
|---|
| 15 | 14 | Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.\n | | 3 | Each |
|---|
| 16 | 15 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. \n(i) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side\nof tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.\n(A) Deep Colour & White\n | | 40 | M2 |
|---|
| 17 | 16 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. \na) Pakur Variety\n\n | | 3.25 | M3 |
|---|
| 18 | 17 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. \n(B) Wall\nWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91\nKg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.\n(b) Area of each tile above 0.09 Sq.m\n(i) Coloured decorative | | 30 | M2 |
|---|
| 19 | 18 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. \n(ii) 4 mm thick | | 10 | M2 |
|---|
| 20 | 19 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. \n10-12 Micron thickness Annodizing film \nNatural white | | 38 | KG. |
|---|
| 21 | 20 | Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of Engineer-in-charge. \n(Excluding cost of glass/ panel board, \n10-12 Micron thickness Annodizing film. Natural white. \na) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90 sqm\n | | 20 | KG. |
|---|
| 22 | 21 | Supplying & fixing approved quality carpet with adhesive at flow ad skirting as per direction of Engineer-in-charge\n | | 130 | M2 |
|---|
| 23 | 22 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty \nTwo coat \nii) Luxury Quality | | 220 | M2 |
|---|
| 24 | 23 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works. \n(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of\nEngineer-In-Charge.\n\n | | 12 | M2 |
|---|
| 25 | 24 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. \n(a) For works in foundation and upto roof of ground floor/upto 4 m \n(i) Tor steel/Mild Steel\nI. SAIL/ TATA/RINL | | 0.25 | MT |
|---|
| 26 | 25 | Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP). \n(b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating). | | 20 | M2 |
|---|
| 27 | 26 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.\n | | 150 | M2 |
|---|
| 28 | 27 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.\n(a) On timber or plastered surface:\n(iv) Two coats (with any shade except white) | | 150 | M2 |
|---|
| 29 | 28 | Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. \n(ii) 600 mm X 150 mm\n(a) Salt glazed stone ware | | 5 | M |
|---|
| 30 | 29 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. \n(A) For Exposed Work \na)(ii) 15 mm dia. medium quality | | 15 | M |
|---|
| 31 | 30 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. \nB)With'S' hup | | 1 | Each |
|---|
| 32 | 31 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. | | 1 | Each |
|---|
| 33 | 32 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete. \n(ii) 470 mm X 280 mm X 340 mm | | 1 | Each |
|---|
| 34 | 33 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. \n(ii) 550 mm X 400 mm size | | 1 | Each |
|---|
| 35 | 34 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. \n(ii) 600 mm X 450 mm | | 1 | Each |
|---|
| 36 | 35 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings.\n(vii) 25 mm dia | | 1 | Each |
|---|
| 37 | 36 | Supplying, fitting and fixing bib cock or stop cock. \n(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). | | 3 | Each |
|---|
| 38 | 37 | ADD : GST - 12% (SGST = 6% & CGST = 6%) | | 1 | no. |
|---|
| 39 | 38 | ADD : WEST BENGAL LABOUR WELFARE CESS = 1% | 28 | 1 | no. |
|---|
| 40 | Total in Figures | | | | |
|---|
