| 1 | 1 | B&R PORTION:-\nTaking down chowkats or frames with shutter w/o taking off shutter from the frame n.exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) all as specified and directed. \n\n | | 36 | Each |
|---|
| 2 | 2 | Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm but n.exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) all as specified and directed. | | 50 | Each |
|---|
| 3 | 3 | Taking down shutters of any description exc. 1 sqm and n. exc. 2 sqm each, all as specified and directed. | | 5 | Per Leaf |
|---|
| 4 | 4 | Demolition of brick or stone boulders masonry work built in cement mortar or cement lime mortar including all quoins, arches pillars etc and removing unserviceable material to a distance exc 100 mtr complete all as specified. | | 1.65 | Cubic Metre |
|---|
| 5 | 5 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing unserviceable material to a distance nexc 100 mtr, complete all as specified. | | 2 | Cubic Metre |
|---|
| 6 | 6 | Demolition of RCC (other then ground floor) beam landing, chajjas slabs shelves, kitchen chimney & similar suspended work and removing unserviceable material to a distance nexc 100 mtr, complete all as specified. | | 1.65 | Cubic Metre |
|---|
| 7 | 7 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including racking out joints hacking for key scrubbing with water etc., complete all as specified. | | 730 | Square Metre |
|---|
| 8 | 8 | Brick work with sub class 'B' brick straight or curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified. | | 1.15 | Cubic Metre |
|---|
| 9 | 9 | Description all as per ser item No-09 above but except bricks. | | 0.5 | Cubic Metre |
|---|
| 10 | 10 | Pressed steel frames for door (Factory made) out of 1.25 mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete, size of frame 105x60mm including bottom of each chowkat to be welded with 2 Nos 25x25x3 mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate including one shop coat of red oxide primer complete all as specified and directed. | | 59 | Running Metre |
|---|
| 11 | 11 | Pressed steel frames for door (Factory made) out of 1.25 mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete, size of frame 125x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3 mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate including one shop coat of red oxide primer complete all as specified and directed. | | 88 | Running Metre |
|---|
| 12 | 12 | Refixing of shutters of any description exc. 1 sqm and n. exc. 2 sqm each, complete all as specified and directed. | | 3 | Per Leaf |
|---|
| 13 | 13 | 18/19 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in cupboard shutter/cupboard shelves /pelmet box including teak wood beading all around complete all as specified & directed. | | 30 | Square Metre |
|---|
| 14 | 14 | Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per sample kept in office of AGE B/R 'A' Jammu and complete all per specified. | | 57 | Running Metre |
|---|
| 15 | 15 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part -II and as per sample kept in office of AGE B/R 'A' Jammu. | | 17 | Square Metre |
|---|
| 16 | 16 | 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified. | | 35 | Square Metre |
|---|
| 17 | 17 | 35 mm thick 2nd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive glass / wire gauge etc. without sash bar but with lock rail edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/wire mesh etc sizes of member as per clause 8.20(a) of SSR part -I for door shutter complete all as specified. | | 50 | Square Metre |
|---|
| 18 | 18 | Steel window 1.25 mm thick Box type (Primer coated) ERW hollow P section of size 60 x 25 mm single rebated comprises glazed skelton shutter ERW sec 50 x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60 x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window including following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication and fixing arrangement as per drg No CEPZ/TD-324,325/07, complete all as specified. | | 45 | Square Metre |
|---|
| 19 | 19 | Steel window 1.25 mm thick Box type (Primer coated) ERW hollow P section of size 60 x 25 mm single rebated comprises wire gauged Skelton shutter ERW sec 50 x 20 mm and 1 mm thick with two Nos of FI section complete welded to frame for holding wire mesh with one vertical mullion of ERW box type T-section of size 60 x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication and fixing arrangement as per drg No CEPZ/TD-324,325/07, complete all as specified. | | 45 | Square Metre |
|---|
| 20 | 20 | Mild Steel work of flat iron, square bar, round bar etc. as in framed work such as grills, guard bars, gratings, etc. including bending, cutting and welding as necessary of confirming to Fe 290-0 Gde-E-16 including one shop coat of red oxide primer all as specified. | | 330 | Kilogram |
|---|
| 21 | 21 | Plain cement concrete type C-1, 1:3:6 (using 20 mm graded croshed stone aggregate) cast in situ for filling the pressed steel frames, complete all as specified. | | 1.2 | Cubic Metre |
|---|
| 22 | 22 | PCC 1:2:4 type B-1 using (20 mm graded crushed stone aggregate) as in blocks for hold fasts, benching, coping, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and directed. Note : Form work required for this item included in the unit rate of this item. | | 3 | Cubic Metre |
|---|
| 23 | 23 | 3 mm thick sheet glass ordinary quality glazing with steel pins, oil putty to steel windows and beads nails etc. to wooden surfaces as in square exc 0.50 sqm in each pane, all as specified. | | 12.6 | Square Metre |
|---|
| 24 | 24 | 3 mm thick figured glass, pin headed / frosted head type and glazing with oil putty in square n.exc 0.50 sqm in each pane, complete all as specified. | | 4.6 | Square Metre |
|---|
| 25 | 25 | Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanized with staples including one coat of red oxide primer complete all as specified. | | 30 | Square Metre |
|---|
| 26 | 26 | Dismantling floor, hearth or wall tiling including cement mortar beding (but not backing) and removing rubbish off the premises complete all as specified and as directed | | 435 | Square Metre |
|---|
| 27 | 27 | Glazed ceramic coloured tiles 300x200x7 mm thick on skirting , dado set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles fixed over & including 10 mm thick screed plaster in CM 1:4, complete all as specified. | | 145 | Square Metre |
|---|
| 28 | 28 | Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors, set and jointed in neat cement slurry and pointed in white/coloured cement with pigment to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:6, complete all as specified. | | 80 | Square Metre |
|---|
| 29 | 29 | Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors, set and jointed in neat cement slurry and pointed in white/coloured cement with pigment to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:6, complete all as specified. | | 210 | Square Metre |
|---|
| 30 | 30 | 18 to 20 mm thick green Marble work (table rubbed and polished ) in stapes jambs, pillars, window cill, cooking platform and like over & including 20mm thick sceed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble, complete all as specified. | | 15 | Square Metre |
|---|
| 31 | 31 | 25 mm thick PCC 1:2:4 type B-1 using 20 mm crushed stone aggregate as in base course to floor finished rough, complete all as specified. | | 290 | Square Metre |
|---|
| 32 | 32 | WC Orissa pattern white with integral foot rest 580 x 440 mm including PCC bedding 1:2:4 and making good disturbed floor connecting to trap and flush pipe fixed in repairs, complete all as specified. | | 6 | Each |
|---|
| 33 | 33 | PVC (SWR) P trap 110/110 mm bore complete all as specified. | | 6 | Each |
|---|
| 34 | 34 | PVC low level flushing cistern 10 Ltr capacity white with inlet ball value float and handle or push button type including brackets, PVC flush pipe fixed in repairs, complete all as specified and directed. | | 6 | Each |
|---|
| 35 | 35 | PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipes of 15 mm bore, complete all as specified. | | 6 | Each |
|---|
| 36 | 36 | 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified. | | 6 | Each |
|---|
| 37 | 37 | Bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore, fixed in repairs, complete all as specified. | | 36 | Each |
|---|
| 38 | 38 | Stop valve/angle valve cast copper chromium plated screwed down high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe fixed in repairs, complete all as specified. | | 48 | Each |
|---|
| 39 | 39 | Brass chromium plated shower rose 125 mm size swivel type with connecting rod 15 mm bore fixed in repairs, complete all as specified. | | 12 | Each |
|---|
| 40 | 40 | Stop valve cast copper chromium plated concealed type screwed down high pressure with capstan head suitable for 15 mm bore, fixed in repairs, complete all as specified. | | 12 | Each |
|---|
| 41 | 41 | Stainless steel gratings of outer frame dia 150 mm openable type including all necessary fitting such as hinges including embedding in tiles with white cement, complete all as specified. | | 36 | Each |
|---|
| 42 | 42 | Rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and to be finished even and smooth without using extra cement, complete all as specified. | | 430 | Square Metre |
|---|
| 43 | 43 | Rendering 15 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces and to be finished even and smooth without using extra cement, complete all as specified. | | 200 | Square Metre |
|---|
| 44 | 44 | Rendering 10 mm thick cement plaster 1:4 on fair faces of concrete surfaces as in ceiling, chajja, shelves etc. finished even and smooth without using extra cement, complete all as specified. | | 100 | Square Metre |
|---|
| 45 | 45 | Rendering 15 mm thick cement plaster 1:3 on other then fair faces of concrete surfaces as on facia of roof slab, chajja, shelves etc. finished even and smooth without using extra cement (including all necessary scaffolding, lifting arrangment for three story building on external surfaces), complete all as specified. | | 20 | Square Metre |
|---|
| 46 | 46 | MS PVC coated drapery rods of 25 mm dia complete with coloured conical end ball at both end, dia not less then 50 mm and fitted with and including MS PVC sheeted/powdered coated bracket size 150 mm made to shape or 75 mm dia PVC/PVC coated coloured end wall to wall round block made to shape in male and female pieces as required at site, complete all as specified. | | 82 | Running Metre |
|---|
| 47 | 47 | Taking up or down GI tubing of 15 mm dia and connection and including cleaning for refixing or removal all as specified. | | 120 | Running Metre |
|---|
| 48 | 48 | Taking up or down GI tubing of 20 mm dia and connection and including cleaning for refixing or removal all as specified. | | 90 | Running Metre |
|---|
| 49 | 49 | Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified. | | 105 | Running Metre |
|---|
| 50 | 50 | Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified. | | 80 | Running Metre |
|---|
| 51 | 51 | Refixing old 15 mm bore steel tubing and connections in new or old position (wall, ceiling, floor etc) with & including new fittings as requiered complete all as specified and directed. | | 15 | Running Metre |
|---|
| 52 | 52 | Refixing old 20 mm bore steel tubing and connections in new or old position (wall, ceiling, floor etc) with & including new fittings as requiered complete all as specified and directed. | | 10 | Running Metre |
|---|
| 53 | 53 | Cutting chases for concealed water tubing or concealed conduit & making good in CM 1:3 of grith exc 10 cm and n.exc 20 cm in brick wall, complete all as specified. | | 60 | Running Metre |
|---|
| 54 | 54 | PCC 1:3:6 type C-2, 75 mm thick using 40 mm graded crushed stone aggregate as in plinth protection, complete all as specified. | | 30 | Square Metre |
|---|
| 55 | 55 | Taking down AC eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories, complete all as specified. | | 30 | Running Metre |
|---|
| 56 | 56 | Taking down CI pipes 100 mm bore including all fittings like bends, branch pieces, connectors, heel rest bend etc all as specified and directed. | | 12 | Running Metre |
|---|
| 57 | 57 | Taking down CI pipes 75 mm bore including all fittings like bends, branch pieces, connectors, heel rest bend etc all as specified and directed. | | 16.5 | Running Metre |
|---|
| 58 | 58 | Taking down CI pipes 50 mm bore including all fittings like bends, branch pieces, connectors, heel rest bend etc all as specified and directed. | | 4 | Running Metre |
|---|
| 59 | 59 | PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floor with steel clamps all as specified and directed, | | 42 | Running Metre |
|---|
| 60 | 60 | PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floor with steel clamps all as specified and directed. | | 16.5 | Running Metre |
|---|
| 61 | 61 | PVC SWR bends of 110 mm bore, complete all as specified. | | 4 | Each |
|---|
| 62 | 62 | PVC SWR bends of 75 mm bore, complete all as specified. | | 4 | Each |
|---|
| 63 | 63 | PVC (SWR) juncion double (double T) equal or unequal provided with oval access door of 110 mm dia, complete all as specified. | | 2 | Each |
|---|
| 64 | 64 | PVC (SWR) juncion single (single T) equal or unequal provided with oval access door of 75 mm dia, complete all as specified. | | 4 | Each |
|---|
| 65 | 65 | PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia, complete all as specified. | | 24 | Each |
|---|
| 66 | 66 | PVC (SWR) reducer of 110 mm dia, complete all as specified. | | 2 | Each |
|---|
| 67 | 67 | PVC (SWR) vent cowl 75 mm bore, complete all as specified. | | 2 | Each |
|---|
| 68 | 68 | Butt hinges of mild steel cold rolled medium weight of size 50 mm, complete all as specified. | | 42 | Each |
|---|
| 69 | 69 | Butt hinges of mild steel cold rolled medium weight of size 100 mm, complete all as specified. | | 36 | Each |
|---|
| 70 | 70 | Mild steel helical / ordinary rat tail rod pattern door spring 300 mm including roller and roller plate complete fixed with welding all as specified (ISI marked), complete all as specified. | | 24 | Each |
|---|
| 71 | 71 | Mild Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia 100mm size, complete all as specified. | | 12 | Each |
|---|
| 72 | 72 | Small fittings of 2nd class hardwood such as brackets of any types latch and hings blocks shaped door and window stops and the like, not exc 200 cu cm each, complete all as specified. | | 42 | Each |
|---|
| 73 | 73 | Mild steel barrel type tower bolts 150 mm long, stove enamelled black with bright bolt, complete all as specified. | | 108 | Each |
|---|
| 74 | 74 | Framed work of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc conforming to Fe.410 - 0 or Fe- 310-0, complete all as specified. | | 250 | Kilogram |
|---|
| 75 | 75 | Mild steel sliding door bolt 300 mm long plate type stove enamelled black with bright bolt not less then 12 mm dia with the including a min of 6 bolts and nuts four on bolt plate and two on staple plate, complete all as specified. | | 36 | Each |
|---|
| 76 | 76 | 100 mm long hasp and staple, aluminium anodized with bolt to hinge palte and fixed with screws, complete all as specified. | | 24 | Each |
|---|
| 77 | 77 | 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge, anodised\nand fixed, type B-21, complete all as specified. | | 72 | Each |
|---|
| 78 | 78 | 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified. | | 120 | Each |
|---|
| 79 | 79 | 150 mm long extruded Aluminium handles, fabricated type, anodised complete all as specified. | | 360 | Each |
|---|
| 80 | 80 | Dismantling /disconnecting /demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) exc 250 and n.exc 500 ltrs capacity and removing from site or refixing in position, complete all as specified. | | 12 | Each |
|---|
| 81 | 81 | Rotational moulded polythylene water storage tank with float valve of suitable size, plastic lid cover, double layered, cylindrical verticl with closed top hoisted and fixed in position of capacity 500 Ltr incl making connections complete all as specified. | | 12 | Each |
|---|
| 82 | 82 | Stop valve 20 mm dia cast copper alloy, secrewed down high pressure with crutch or butterfly handle secrewed both ends for iron pipe and fixed in repairs, complete all as specified. | | 12 | Each |
|---|
| 83 | 83 | Taking out the root of trees/stirrups of any girth from the surface of bldgs and making good the damaged portion to match with the existing surface in CM (1:3) or with PCC (1:2:4) or Brick work in CM (1:4) and finally finishing the surface to match with the existing surface, complete all as specified. | | 10 | Each |
|---|
| 84 | 84 | Removing of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust foreign items, complete all as specified. | | 150 | Square Metre |
|---|
| 85 | 85 | Roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping, cleaning and washing down with water to remove dust, complete all as specified. | | 150 | Square Metre |
|---|
| 86 | 86 | M&L Brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directed. | | 150 | Square Metre |
|---|
| 87 | 87 | PCC (1:2:4) type B-0, (using 12.5mm graded crushed stone aggregate) mix with liquid water proofing compound and laid on RCC slab as base layer for roof treatment as roof padding as directed by engineer in charge.\nNote:-Liquid water proofing compound shall be measured & paid seperately. | | 11.25 | Cubic Metre |
|---|
| 88 | 88 | 15 mm thick screed bed in CM 1:4 on brick/concrete even surfaces, finish the surface fair & even, complete all as specified. | | 150 | Square Metre |
|---|
| 89 | 89 | M&L Applying evenly a tack coat of Industrial Bitumen 85/25 at the rare of 1.2 kg per Sqn including cleaning the surface complete all as specified and as directed. | | 150 | Square Metre |
|---|
| 90 | 90 | APP modify polymeric membrane with mineral finished on top, minimum 3mm thick, weighing not less than 3.6 Kg/Sqm reinforced with polyester non oven febrics as per manufacture instruction laid with 75mm side overlap and 100mm overlap. The membrane has to be laid with LPG torch and overlap sealed and fineshed neat. All joints and changes in direction should be covered with cement mortar 1:3 mixed with SBR latex @ of 200ml/Bag of cement and curved before laying membrane complete all as specified. | | 150 | Square Metre |
|---|
| 91 | 91 | Supply only liquid water proofing compound, Make pidilite LW as per manufacturer instruction, complete all as specified. | | 8 | Litre |
|---|
| 92 | 92 | Preparation surface of sunken slab and applying 15mm thick plaster in cement morter 1:4 mixed with water proofing compound both on floor and wall @ 200ml per 50 Kg bag of cement. Then apply Epoxy Resin coating with modified cementtition coating like Brush Bond of Fosroc/Pedilite/Bostic as per manufacture instruction both on floor and wall complete all as specified. | | 15 | Square Metre |
|---|
| 93 | 93 | Preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over priming with red oxide, complete all as specified. | | 130 | Square Metre |
|---|
| 94 | 94 | Preparation of old steel surface or primed steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints, complete all as specified. | | 20 | Square Metre |
|---|
| 95 | 95 | Preparation of new wood, wood based or plastic surface of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified. | | 85 | Square Metre |
|---|
| 96 | 96 | Preparation to newly plastered surfaces of walls and applying two coat of oil bound distemper over chalk whiting complete all as specified and directed by Engr-in-Charge. | | 300 | Square Metre |
|---|
| 97 | 97 | preparation of old plastered surfaces of walls and applying two coat of oil bound distemper complete all as specified and directed by Engr-in-Charge. | | 300 | Square Metre |
|---|
| 98 | 98 | Preparation of old plastered surfaces including filling of small holes etc and applying two coat of white wash over wall surface, complete all as specified. | | 180 | Square Metre |
|---|
| 99 | 99 | Complete removal of existing treatement of plastered surface & applying three coat of white wash on ceiling, complete all as specified. | | 180 | Square Metre |
|---|
| 100 | 100 | Preparation of old plastered surfaces including filling of small holes etc and applying two coat of white wash on ceiling, complete all as specified. | | 200 | Square Metre |
|---|
| 101 | 101 | Applying three coat of white wash on new plastered surfaces of ceiling including preparation of surface complete all as specified and directed. | | 100 | Square Metre |
|---|
| 102 | 102 | Preparation of newly plastered surfaces of wall and chajja and applying two coat of cement base paint over a coat of alkali resistant primer, complete all as specified. | | 180 | Square Metre |
|---|
| 103 | 103 | Two coats of cement base paint to old treated plastered surfaces including preparation of surfaces complete all as specified and directed | | 400 | Square Metre |
|---|
| 104 | 104 | Machine cut kota stone slab flooring 18-20 mm thick laid over & including cement screed base 20 mm thick in cement mortar 1:6 set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and polishing to granite finish complete all as specified and directed. | | 50 | Square Metre |
|---|
| 105 | 105 | Machine cut kota stone slab 18-20 mm thick as in riser of steps, skirting, dado and pillar laid over cement screed plaster of 15 mm thick in cement morter 1:4, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and polishing to granite finish complete all as specified and directed. | | 20 | Square Metre |
|---|
| 106 | 106 | Stainless steel kitchen sink without drainage board made of stainless steel of 1 mm thick sheet including plugs, washers and pvc waste pipe of 40 mm dia. Fixing with complete on appropiate size of cantilever brackets of MS angle or GI pipe 15 mm dia with proper arrangment to hold and fitting of sink complete all as specified and directed at site and connecting union to pipe. The overall size of sink 495 mm x 420 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. | | 6 | Each |
|---|
| 107 | 107 | Stainless steel grade 430, glossy finish, wall hanging plate rack inclusive of spoon hanger, made out of 1 mm thick sheet of size 750 x 600 x 250 mm having partition as per sample kept in AGE B/R Office and fixed with steel fasterners or steel screwed complete all as specified.\n | | 6 | Each |
|---|
| 108 | 108 | Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minwt.170gms) complete all as specified. | | 6 | Each |
|---|
| 109 | 109 | Rolled mild steel Fe 410-W (Gde-E250 quality-A) Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), complete all as specified. | | 180 | Kilogram |
|---|
| 110 | 110 | Vitreous China wash hand basin, white, flat back, size 450x300 mm including 32 mm dia PVC waste pipe, CP brass waste coupling 32 mm dia, pair of MS brackets or MS fastener/bolts for fixing arrangements and 450 mm long PVC connection with PVC nut and washer fixed in repairs, complete at site and all as directed. | | 6 | Each |
|---|
| 111 | 111 | Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed suitable for 15 mm bore complete all as specified. | | 6 | Each |
|---|
| 112 | 112 | E&M PORTION:-\nTaking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed. | | 120 | Per Point |
|---|
| 113 | 113 | Taking down carefully unsv main switch / DBs alongwith MCBs / wooden board / connected fittings & fixtures any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed.\nNote:-Old serviceable switches & MCB shall be taken on charge by the MES for reuse and unsv fittings shall be credited to the contractor. | | 6 | Each |
|---|
| 114 | 114 | Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked of required size terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc for one light/fan/bell point controlled by one, one way switch including cutting chases and making good to disturbed surfaces of wall / ceiling / floor including treating with existing finishes, complete all as specified and as directed. | | 84 | Per Point |
|---|
| 115 | 115 | Description all as per item No. 114 abovebut for 3 pin 5 Amps on same board with cable 1.5Sqmm size, all as specified and directed | | 6 | Per Point |
|---|
| 116 | 116 | Description all as per srl item No-114 here in before but for one 3 pin socket outlet 6 amp independent complete all as specified. | | 18 | Per Point |
|---|
| 117 | 117 | Description all as per srl item No 114 here in before but for one light point controlled by two way switchs, complete all as specified. | | 3 | Per point |
|---|
| 118 | 118 | Description all as per srl item No 114 here in before but for one bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size, complete all as specified and directed. | | 6 | Per point |
|---|
| 119 | 119 | Description all as per srl item No 114 here in before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for main wiring and 1.5 sqmm as in continuous earth wire. | | 6 | Per Point |
|---|
| 120 | 120 | Switch socket outlet, 3 pin, 6 Amp flush type universal,complete all as specifed.\n | | 24 | Each |
|---|
| 121 | 121 | Switch socket multipurpose combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal,complete all as specifed.\n | | 6 | Each |
|---|
| 122 | 122 | Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. | | 42 | Each |
|---|
| 123 | 123 | LED lamp 9W. Make:- Crompton Cat Part No LED 9W - B22 - CDL or Equivalent cat part of make as specified in Appx 'F' here in after. | | 42 | Each |
|---|
| 124 | 124 | Switch piano flush type 6 Amp single pole two way, (ISI marked), complete all as specified. | | 108 | Each |
|---|
| 125 | 125 | Bell push piano flush type 6 Amp, (ISI marked), complete all as specified. | | 6 | Each |
|---|
| 126 | 126 | Musical door bell, 230 volts AC supply all as specified and directed by Engineer-in-Charge. | | 6 | Each |
|---|
| 127 | 127 | Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified. Make:- Legrand cat part No-5076 21 or Equivalent cat part of make as specified in Appx 'F' here in after.\n | | 6 | Each |
|---|
| 128 | 128 | Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, compete all as specified. | | 42 | Each |
|---|
| 129 | 129 | Tube light fitting box type suitable for LED 18-20W tube Rod with end cap made out of CRCA sheet powder coated complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 18-20LED tube rod 4 feet long complete all as specified and directed. Make:-Crompton Cat Part No:-LTT8-20 for LED tube rod & DMLN1LT8-16 for fittings or Equivalent cat part of make as specified in Appx 'F' here in after.\nNote :- The LED batten and LED tube rod shall be of same make.\n | | 24 | Each |
|---|
| 130 | 130 | MCB single pole and neutral 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand cat part No-4086 09 to 4086 17 or Equivalent cat part of make as specified in Appx 'F' here in after. | | 6 | Each |
|---|
| 131 | 131 | MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series fixed in repair, complete all as specified. \nMake:- Legrand cat part No-4085 87 to 4085 95 or Equivalent cat part of make as specified in Appx 'F' here in after. | | 36 | Each |
|---|
| 132 | 132 | MCB triple pole and neutral 6 to 32 amps 415 volts 10 KA 'C' series fixed in repair, complete all as specified. \nMake:- Legrand cat part No-4086 72 to 4086 80 or Equivalent cat part of make as specified in Appx 'F' here in after. | | 1 | Each |
|---|
| 133 | 133 | Distribution board TPN 4 ways IP 43-'IK 09 with bus bars neutral links blanking plates double door suitable for FP MCB/Isolator/RCCB/RCBO as incommer and SP MCB's as outgoing complete all as specified Make:-Legrand Cat part No :-5076 80 or equivalent cat part of make as specified in Appx \"F\" , complete all as specified. \nNote:- MCCBs and MCBs shall be measured and paid separately | | 1 | Each |
|---|
| 134 | 134 | Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron earth lead strip 32x6mm by means of nut, bolt, check nuts and washer of galvanised ironincluding PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh, 40mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection pipe, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.\nNote:- Rate for earth lead wire & protection pipe upto 7.5mtr length are inclussive in this item & no extra payment shall be admissible for the same. | | 1 | Each |
|---|
