Sales : +91-777 804 8217
| Name of Work: Assisted reproductive Technology Centre at Guwahati Medical College & Hospital (Construction of IVF Centre) at 5th Floor of MCH Building, GMCH, Guwahati-32 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels | item1 | 14.984 | cum |
| 2 | 2 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. (N) Without using admixtures (b) M20 grade concrete or Prop. 1:1.5:3 | item2 | 22 | cum |
| 3 | 3 | Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level. | item3 | 22 | cum |
| 4 | 4 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:\nSides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M (ii) Using 25mm thick plank | item4 | 137.5 | sqm |
| 5 | 5 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.1 & 3.1.3(b). | item5 | 137.5 | sqm |
| 6 | 6 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall\n(a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | item6 | 750 | sqm |
| 7 | 7 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level.\n(a) 112mm thick brick/ R.B wall | item7 | 750 | sqm |
| 8 | 8 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (a) With sal wood | item8 | 1.51 | cum, |
| 9 | 9 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. \n(a) Decorative type face panel and block board core. (ii) 35 mm thick . | item9 | 52.5 | sqm, |
| 10 | 10 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar ) | item10 | 25 | qntl. |
| 11 | 11 | Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above first floor level. | item11 | 25 | qntl. |
| 12 | 12 | Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels. | item12 | 150 | Sqm |
| 13 | 13 | (A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.:\n (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat.\n (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) @ 15% by weight of cement.\n (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) mixed with cement in the ratio 1:2 as final coat.\n(B) Using RHEOMIX 131 OF BASF | item13 | 150 | Sqm |
| 14 | 14 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.\nb) In cement mortar 1:4 | item14 | 562.5 | Sqm |
| 15 | 15 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.\nB) On fair side\nb) In cement mortar 1:4 | item15 | 937.5 | Sqm |
| 16 | 16 | Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed.\nb) On two coat plaster | item16 | 937.5 | Sqm |
| 17 | 17 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.\n(A) CERAMIC iii)Executive range-2 (Sizes 600 mm x 600mm and above) Somany made- VC Shield (Group- 25) (605x605) mm a) Deluxe -VC | item17 | 10.33 | sqm, |
| 18 | 18 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)\nb) Executive range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make i) Of size 800mmx800mm and above | item18 | 389.4 | sqm |
| 19 | 19 | Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). (iii) Of size300mmx600mm and above | item19 | 121 | sqm |
| 20 | 20 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.\n(a)2 Track sliding window\n(i)6mm clear glass | item20 | 2.43 | sqm |
| 21 | 21 | Providing 18mm thick Granite slab on vertical face of pedestal laid over 10 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade. | item21 | 22 | sqm |
| 22 | 22 | Supplying and installing uPVC- Sliding Windows made out of Lead free green profile having \"GREENLINE\" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, gro (a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash having 1.5mm thick reinforcement, Interlock: 43mm x 23mm (Glass Panel)\n(WINSTA KOMMERLING/ FINESTA/ ENCRAFT) (i) 2-Panel with 5mm clear float glass | item22 | 1.3 | Sqm |
| 23 | 23 | Grading roof for water proofing treatment with \n(a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size) | item23 | 15 | Cum |
| 24 | 24 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick | item24 | 1500 | sqm |
| 25 | 25 | d) Applying one coat of alkali resistance primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | item25 | 1500 | sqm |
| 26 | 26 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | item26 | 937.5 | Sqm |
| 27 | 27 | Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem \"Rakshak\" brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department. | item27 | 562.5 | Sqm |
| 28 | 28 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting.\n(a). With ready mixed paint , Wood primer (pink) | item28 | 52.5 | Sqm |
| 29 | 29 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.\n(i).Surfaces over 100mm in width or girth.\nb). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item29 | 52.5 | Sqm |
| 30 | 30 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.\na). With ready mixed \"red-lead/ red oxide\" primer. | item30 | 20.94 | Sqm |
| 31 | 31 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.\n(i).Surfaces over 100mm in width or girth.\nb). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item31 | 20.94 | Sqm |
| 32 | 32 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\na) Sliding door bolts\ni) 300mm x 16mm | item32 | 24 | each |
| 33 | 33 | b) Tower bolts\nii) 250mm x 12mm | item33 | 52 | each |
| 34 | 34 | c) Door handles\nii) 100mm | item34 | 52 | each |
| 35 | 35 | d) Gate shutter hook & eye\nv) 300mm | item35 | 52 | each |
| 36 | 36 | l) Hydraulic door closure | item36 | 12 | each |
| 37 | 37 | Providing & fixing Armstrong Stainless Steel ceiling Tiles, MW-SS Mirror finish clip in swingdawn 600x600-0.5mm with GI-DP12 Carrier Grid Suspension system etc. all complete as directed. | item37 | 45.31 | Sqm |
| 38 | 38 | Providing & fixing Armstrong Bio-Guard Plain RH99 600x600-16mm Global white anti fungle board with prelude XL32-24mm Metal Grid etc. all complete as directed. | item38 | 173.59 | Sqm |
| 39 | 39 | Providing, fixing and fixing 2mm thick homogeneous vinyl floor covering in sheet with directional design colour dyed as raw mixture to ensure colour throughout the thickness. Its receive PUR protect surface treatment with excellent cleaning characteristics, improved resistence to scarching and scuffing, mipolam action incorporates a becteria static and fungi static etc. all complete as directed. | item39 | 82.36 | Sqm |
| 40 | 40 | Providing, fixing and fixing 1mm thick vinyl flex for wall covering with antibacterial and fungustics properties etc. all complete as directed. | item40 | 88.88 | Sqm |
| 41 | 41 | Providing, fixing and fixing 100/80mm thick double skin self supporting modular wall panel system made of 0.6mm thick powder coated GI Polyurethane Foam as infill of density 40+2 Kg/m3. GI Profiles for reinforcement along the periphery made air tight with Silicone sealant etc. all complete as directed. | item41 | 83.97 | Sqm |
| 42 | 42 | Providing, fixing and fixing of Stainless steel O.T. Single leaf Door size 2100mm x 900mm with frame material of 1.2mm (18G) SS sheet, door left outer material of 0.8mm (22G) SS sheet and Filler material of PUF insulation etc. all complete as directed. | item42 | 1 | each |
| 43 | 43 | Providing, fixing and fixing of Stainless steel O.T. Double Door size 2100mm x 1200mm with frame material of 1.2mm (18G) SS sheet, door left outer material of 0.8mm (22G) SS sheet and Inner material of 0.8mm (22G) SS sheet and Filler material of PUF insulation etc. all complete as directed. | item43 | 2 | each |
| 44 | 44 | Providing and applying interior/ exterior walls & floors/ roofs with one coat techoxy-non toxic WT Epoxy priming coat of choksey brand after cleaning and applying of choksey brand of required shade on walls/ floors/ roof surfaces as specified and directed. | item44 | 70.72 | Sqm |
| 45 | 45 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)\na) Parryware make\na) White\n(iii) Universal Closet P Trap (Cat No.C0272) (inclusive of seat cover) | item45 | 5 | Each |
| 46 | 46 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)\nBasin (without pedestal)\na) Parryware make\na) White\n(iii) Tunga Basin 450 x 300 (Cat. No.C0401) | item46 | 8 | Each |
| 47 | 47 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. \nBasin (without pedestal)\nElbow action pillar cock (Agmeco)\n(b) MS-491/ Heavy Duty | item47 | 8 | Each |
| 48 | 48 | Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified.\n(d) Sona make \n(i) Super (Cat. No.AL-1001) | item48 | 3 | each |
| 49 | 49 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) \nAgmeco brand\n(v) Bib Cock Two way with Flange CAT No.CC 00203/CAT No.CN 00203 | item49 | 8 | each |
| 50 | 50 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified.\n(c) Agmeco Made\n(i) Cubin (Cat. No.CB-00101) | item50 | 8 | each |
| 51 | 51 | Providing, fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and specified.\n(c) Agmeco Made\n(a) Liquid soap container Capsule Type (Cat.No.LSC-0001) | item51 | 4 | each |
| 52 | 52 | Supplying fitting and fixing Chrome Plated (C.P.) flush cock of approved brand as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \nEssco brand\n(a) Flush cock with wall flange 25mm size with lever handle | item52 | 5 | each |
| 53 | 53 | Renewing stainless steel kitchen sink of Parryware make with PVC waste pipe etc. complete including painting the fittings , cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately) \n(A) Parryware Make\n(vi) Single Bowl (160 x 180) Flat Edge - Glossy (Cat.No.C8538) | item53 | 1 | each |
| 54 | 54 | Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) \nSona brand\na) Sink cock upper/ lower spout 15mm | item54 | 1 | each |
| 55 | 55 | Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified.\n(b) Sona make \n(i) Bottle trap indian 32mm (Cat. No.BT-0751) | item55 | 8 | each |
| 56 | 56 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \nLauret Brand\n(a) Angular stop-cock with wall flange | item56 | 26 | each |
| 57 | 57 | Providing fitting and fixing Decorative Mirror complete as directed and specified.\n(A) Parryware Make \n(b) Size 600mm x 450mm | item57 | 9 | each |
| 58 | 58 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. \nIn exposed surface or in trenches.\n110mm dia. | item58 | 110 | RM |
| 59 | 59 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\nConcealed by breaking brick wall/C.C/R.C.C, and making good to the damages. 110mm dia. | item59 | 12 | each |
| 60 | 60 | 50mm dia. | item60 | 8 | each |
| 61 | 61 | Providing & fixing composite end seal compression fittings as per ASTM F-1282-1995 annexure for cold water supply e.g. tees, elbows, reducers, connectors, couplers & clamps with jointing, testing complete including cutting & making good etc. \nClamp fitting holding with necessary metal fasteners & screws\na)1216/1620 | item61 | 36 | Each |
| 62 | 62 | Supplying fitting and fixing Ajoy Flowguard CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified.\n(Note: Ball valve and union will be charged extra and does not comes under Accessories)\n(ii) Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to damages\n(b) 20 mm OD | item62 | 27.48 | RM |
| 63 | 63 | (c) 25 mm OD | item63 | 45 | RM |
| 64 | 64 | (i) In internal wall - exposed on wall\n(e) 40 mm OD | item64 | 45 | RM |
| 65 | 65 | Wiring for light/ fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) in GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete\n Short point up to 3.00 metre. length. | item65 | 5 | Each |
| 66 | 66 | Medium point up to 6.00 metre. Length. | item66 | 29 | Each |
| 67 | 67 | Long point up to 10.00 metre. Length. | item67 | 48 | Each |
| 68 | 68 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (ISI marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.\n Short point up to 3.00 metre. Length. | item68 | 1 | Each |
| 69 | 69 | Medium point up to 6.00 metre. Length. | item69 | 10 | Each |
| 70 | 70 | Long point up to 10.00 metre. Length. | item70 | 20 | Each |
| 71 | 71 | Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (ISI marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 2 mm thick 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) \nShort point up to 3.00 metre. Length.\n | item71 | 4 | Each |
| 72 | 72 | Medium point up to 6.00 metre. Length. | item72 | 4 | Each |
| 73 | 73 | Long point up to 10.00 metre. Length. | item73 | 30 | Each |
| 74 | 74 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) with earth continuity in surface/ recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit wiring system.\n(a) with 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit. | item74 | 1632 | Mtr. |
| 75 | 75 | b) with 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. in 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit | item75 | 2246 | Mtr. |
| 76 | 76 | With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit. \n | item76 | 35 | Mtr. |
| 77 | 77 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.\nc) with 4x 6 sq. mm. + earth continuity with 2x4 sq. mm. cable in 32 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit | item77 | 45 | Mtr. |
| 78 | 78 | With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit. \n | item78 | 32 | Mtr. |
| 79 | 79 | With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit. \n | item79 | 30 | Mtr. |
| 80 | 80 | Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item80 | 55 | Each |
| 81 | 81 | Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item81 | 59 | Each |
| 82 | 82 | Supplying with fitting fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item82 | 125 | Each |
| 83 | 83 | Supplying including installation of socket outlet 6 Amps 3 pin universal combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | item83 | 82 | Each |
| 84 | 84 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department.\n1-2 module type Metal | item84 | 4 | Each |
| 85 | 85 | 3 module type Metal | item85 | 70 | Each |
| 86 | 86 | 4 module type Metal | item86 | 9 | Each |
| 87 | 87 | 6 module type Metal | item87 | 40 | Each |
| 88 | 88 | 8 module type Metal | item88 | 7 | Each |
| 89 | 89 | 12 module type Metal | item89 | 1 | Each |
| 90 | 90 | Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department.\n2 module | item90 | 4 | Each |
| 91 | 91 | 3 module | item91 | 70 | Each |
| 92 | 92 | 4 module | item92 | 9 | Each |
| 93 | 93 | 6 module | item93 | 40 | Each |
| 94 | 94 | 8 module | item94 | 7 | Each |
| 95 | 95 | 12 module | item95 | 1 | Each |
| 96 | 96 | Supplying with fitting fixing of blank plate single in modular switch system , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item96 | 51 | Each |
| 97 | 97 | Supplying including fitting and fixing of TV SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item97 | 4 | Each |
| 98 | 98 | Supplying with fitting and fixing of RJ-11 Telephone jack , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item98 | 4 | Each |
| 99 | 99 | Supplying with fitting and fixing of CAT 6 RJ-45 Computer jack in one module , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item99 | 4 | Each |
| 100 | 100 | Supplying ,installation, testing & commissioning of Hi-Path 1120 Digital Communication System equipped with the following: 6 P&T Ports - 16 Extension Ports Auto Call Back , Built-in FAX/DID Built in Voice Guided Direct inward Dialling 3 party Conference In-built Caller ID 100% Non- Block ( SIEMENS or equivalent as approved by the Deptt.) | item100 | 1 | Each |
| 101 | 101 | Supplying with fitting fixing of 24 PORT GIGABIT SMART SWITCH MAKE: DLINK or equivelent as specified and directed by the deptt. | item101 | 1 | Each |
| 102 | 102 | Supply, installation testing and commissioning of following LAN networks equipments.\nSolid Copper Cable Cat 6, 4 pair, UTP - 305m SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt.. | item102 | 305 | Mtr |
| 103 | 103 | Patch Panel Cat 6 UTP Keystone -24 Port- Loaded SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt.. | item103 | 1 | Nos |
| 104 | 104 | Patch Cord Cat 6 UTP Gray 1m - Moulded SCHNEIDER/ LEGRAND or equivalent | item104 | 8 | Nos |
| 105 | 105 | Patch Cord Cat 6 UTP Gray 2m - Moulded SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt.. | item105 | 2 | Nos |
| 106 | 106 | BACK BOX -(Surface Mount Box) For Single and Dual SCHNEIDER/LEGRAND or equivalent make as approved by the Deptt.. | item106 | 4 | Nos |
| 107 | 107 | Supplying, installation of LAN works accessories as directed and specified and directed by the Deptt.\nAPW Flexi box Wall mount Rack 6U 19\"X 500mmD Networking Wall mount Rack with Front Tinted Glass Door with Lock \"PDU 6*5A - 01 Nos.\nFan 90 cfm 230V - 01 Nos.\nMounting Hardware (Set of 10) - 1 Set\n19\"\" 1U Cable Manager - 1 Nos.\" | item107 | 1 | Each |
| 108 | 108 | Supplying with fitting and fixing of RJ-11 Telephone jack , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item108 | 4 | Each |
| 109 | 109 | Supplying with fitting and fixing of CAT 6 RJ-45 Computer jack in one module , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item109 | 4 | Each |
| 110 | 110 | Supplying ,installation, testing & commissioning of 2 pair Unarmoured Telephone Cable through existing conduit in surface/ recess system. | item110 | 120 | Mtr. |
| 111 | 111 | Supplying installation testing of UTP CAT6 without PVC conduit | item111 | 4 | Mtr. |
| 112 | 112 | Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, neutral adjustable with earth fault protection Without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n36KA (ABB, Schneider, legrand, L&T, Siemens, C&S make) \n 100A | item112 | 2 | Each |
| 113 | 113 | 160A | item113 | 3 | Each |
| 114 | 114 | Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 0.85M X 1.20MX 0.40M made of 16 SWG/1.66 mm thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 4nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:\n1. 25mm X 5 mm 4 strip copper Bus-Bar 1.0 M length each \n2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no\n3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no\n4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no\n5. Voltmeter & Ammeter Selector Switch - 2 no\n6. 2 A Slide fuse unit - 3nos\n(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | item114 | 1 | Each |
| 115 | 115 | Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical outdoor type double door, floor mounting compartmentalize panel board of size 1.25M X0.6MX 0.40M made of 16 SWG/1.66 mm thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom and C.R. sheet roofing on the top. The panel board is to be erected in 1 : 3 : 6 PCC foundation including excavation of trench and brick soling etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 65 protection comprising of the following electrical items:\n1. 25mm X 5mm 4 strip copper Bus-Bar 0.5M length each\n2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no\n3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no\n4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no\n5. Voltmeter & Ammeter Selector Switch - 2 no\n6. 2 A Slide fuse unit - 3nos\n(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | item115 | 1 | Each |
| 116 | 116 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n3. D Series\n(ABB, Schneider MG, legrand, Hager make)\n6 to 32A | item116 | 4 | Each |
| 117 | 117 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n3. D Series (Legrand/ C&S or equivalent as approved by the Deptt.) \n6 to 32 | item117 | 1 | Each |
| 118 | 118 | 63A | item118 | 7 | Each |
| 119 | 119 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCCB enclosure of the following rating MCCB fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. \nSchneider neo break, C&S, Havells, INDOASIAN, HPL, V-Guard or equivalent make as approved by the Deptt.) \n for 100A 3P/4P MCCB | item119 | 1 | Each |
| 120 | 120 | for 160A 3P/4P MCCB | item120 | 1 | Each |
| 121 | 121 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof IP-43 double door surface mounting vertical Per Phase Isolation (PP DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. \nABB, Schneider MG, legrand, Hager make)\n8 way TPN (8+6+24) double door | item121 | 3 | Each |
| 122 | 122 | 6 way TPN (8+6+18) double door | item122 | 1 | Each |
| 123 | 123 | Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted double door IP-43 surface mounting vertical TPN MCB DB incorporated with bas-bar up to 250 A , Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.\nABB, Schneider MG, legrand, Hager make) \n 8way TPN (4+18) double door | item123 | 1 | Each |
| 124 | 124 | Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n30mA sensitivity DP RCCB\n(ABB, Schneider MG, legrand, Hager make)\n63A | item124 | 3 | Each |
| 125 | 125 | 100/300mA sensitivity DP RCCB\n(ABB, Schneider MG, legrand, Hager make)\n40A | item125 | 9 | Each |
| 126 | 126 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n3. D Series\n(ABB, Schneider MG, legrand, Hager make)\n6 to 32A | item126 | 75 | Each |
| 127 | 127 | Supplying fitting and fixing including necessary connection as approved by the Deptt.)of Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) of following type and capacity as specified and directed by the Department. ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) \n D.O.L Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make)20 HP, 22 TO 30 A. | item127 | 1 | Each |
| 128 | 128 | Supplying with fitting and fixing of 25A Modular Motor Starter 2M , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | item128 | 1 | Each |
| 129 | 129 | Supplying, installation of GI PERFORATED cable tray on wall or from ceiling including necessary channel, nuts and bolts, washer etc. as required as directed and specified by the department. (LEGRAND/ AKG /STRUTFAST make). \n Size of Tray\n304 | item129 | 5 | Mtr. |
| 130 | 130 | 152 | item130 | 5 | Mtr. |
| 131 | 131 | Fabrication supply and fixing of angle / channel iron brackets / supports of adequate size to support the cables and panels in existing cable trenches including fixing clamps and hard ware metering good the damage etc. as required .( Cable trenches shall be in the scope of building contractor). Contractor should supply the Shop Drawings of Hanging arrangement of Cable Tray. | item131 | 24 | KG |
| 132 | 132 | Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make)\nCore - 3.5\nA2XFY\n25 Sq.mm 3 and 1/2 core armoured cable | item132 | 75 | Mtr. |
| 133 | 133 | 50 Sq.mm 3 and 1/2 core armoured cable | item133 | 75 | Mtr. |
| 134 | 134 | 70 Sq.mm 3 and 1/2 core armoured cable | item134 | 45 | Mtr. |
| 135 | 135 | Supply and laying of following size Power/Control Copper cables, Solid Copper conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Unarmoured, extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988, laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make)\nCore - 3, 2XY\n 4.00 Sq.mm 3 Core Unarmoured | item135 | 15 | Mtr. |
| 136 | 136 | Core - 4, 2XY\n6.00 Sq. mm.4 Core Unarmoured | item136 | 15 | Mtr. |
| 137 | 137 | Supplying,installation,testing and Commission of the following indoor Recessed Mounted LED Luminaires complete with all accessories such as driver etc. In the flase ceiling type Armstronng /Gypsum or similar ceiling mouting with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department \nPhilips lighting luminaire 15 W GreenLEDi 900 Model DN192B LED9S-3000 PSU WH S1 /DN192B LED9S-4000 PSU WH S1 /DN192B LED9S-6500 PSU WH S1 or equivalent as approved by the Deptt. | item137 | 24 | Each |
| 138 | 138 | Philips lighting luminaire 18 W GreenLEDi 1200 Model DN193B LED12S-3000 PSU WH S1 /DN193B LED12S-4000 PSU WH S1 /DN193B LED12S-6500 PSU WH S1 or equivalent as approved by the Deptt. | item138 | 47 | Each |
| 139 | 139 | Supplying with fitting fixing of surface & wall mounted LED luminaries complete with all accessories including driver directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department. \nPhilips model LED Batten 4ft. BN 400 W ESS LED 1200MM 20W 6500K (stellar bright) or equivalent as approved by the Deptt. | item139 | 11 | Each |
| 140 | 140 | Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | item140 | 2 | Each |
| 141 | 141 | Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | item141 | 2 | Each |
| 142 | 142 | Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. | item142 | 2 | Each |
| 143 | 143 | Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt . | item143 | 2 | Each |
| 144 | 144 | Supplying & laying of 8 SWG G.I.. earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | item144 | 30 | Mtr. |
| 145 | 145 | Supplying & laying of 25x4 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. | item145 | 3.46 | Mtr. |
| 146 | 146 | Supplying & laying of 30x5 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. | item146 | 20 | Mtr. |
| 147 | 147 | Supplying & laying of 25x6 mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. | item147 | 80 | Mtr. |
| 148 | 148 | Supplying including installation of UPS\n10 KVA On-Line UPS System (Orion or equivalent make as approved by the Deptt.) with PWM-IGBT technology\n230V AC Input (160V – 280V A 1 Ph input- 1 Ph output\nWith Isolation Transformer\n8KW output with 0.8 output PF\n30 min backup using SMF battery | item148 | 1 | Each |
| 149 | 149 | Supply, Installation, Testing, Commission of Addressable Wall Mounting Sounder / Hooter Brand : MORLEY/FIRELITE/Apollo or equivalent as approved by the Deptt.) | item149 | 8 | Each |
| 150 | 150 | Supply, installation, testing & commissioning of intelligent plug in photo electric Smoke Detectors having features like integral communication, dual LED for 360° viewing angle, walk test with address display etc. UL / LPCB approved, make : HONEYWELL, MORLEY IAS, Model : MI - PSE or equivalent as approved by the Deptt. | item150 | 100 | Each |
| 151 | 151 | Supply, installation, testing & commissioning of Manual pull station with addressable interface, built in LED with key reset facility. UL / LPCB listed. make : HONEYWELL, MORLEY IAS or equivalent as approved by the Deptt.) | item151 | 4 | Each |
| 152 | 152 | Supply, installation, testing & commissioning of 2 Loop Intelligent / Analogue Addressable Fire Alarm Panel Microprocessor based character display Network option built in Alarm, Trouble & supervisory relays LPCB listed. make : HONEYWELL, MORLEY IAS or equivalent as approved by the Deptt.) | item152 | 1 | Each |
| 153 | 153 | Supply, installation, testing & commissioning of Response Indicator to give visual indication of detection of smoke - RED colour LED for indication. make - Agni Suraksha, or equivalent as approved by the Deptt.)System Sensor. | item153 | 50 | Each |
| 154 | 154 | Supply & fixing of 2X1.5sq. mm. PVC insulated copper Armoured Cable on surface/ recess/ above false ceiling etc. as required. (ISI marked) ) | item154 | 400 | Each |
| 155 | 155 | Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built – In pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle As per IS:13849 with ISI mark\n(05 kg capacity) \nBRAND : FIRESTOP / FIREND / FIRE SHIELD | item155 | 2 | Each |
| 156 | 156 | Supply and labour charges for fixing, testing and commissioning of following accessories complete with fixing brackets etc. which shall be supplied by the tenderers with all necessary accessories, tools etc.\n(Rate as per nalysis enclosed)\nWarning signs 415 VOLTS. | item156 | 1 | Each |
| 157 | 157 | Supply of fire bucket with floor/wall mounting stand and first filling of sand. | item157 | 2 | Each |
| 158 | 158 | Supply of First Aid Box | item158 | 1 | Each |
| 159 | 159 | Supply of First Aid Chart in glassed wooden frame | item159 | 1 | Mtr. |
| 160 | 160 | Supply of 1.1 KV grade 1000 mm wide rubber insulating mat at each MCC room. size of 1 m x 2 m as per IS 15652:2006 | item160 | 2 | Each |
| 161 | 161 | AIR CONDITIONING (HVAC) (Outdoor & Indoor Units)\nSupply & Installation of Full Inverter VRF System with Modular type outdoor units, all scroll DC Inverter compressors for cooling applications. All inverter capacity controlling compressors shall be suitable for 3 Phase, 50 Hz. VRF Units yields high COP with highest energy efficiency .(Make : Daikin)\n28 HP | item161 | 1 | Each |
| 162 | 162 | Supply & Installation of WALL MOUNTED TYPE Indoor Units of following capacities.\n0.80TR | item162 | 5 | Each |
| 163 | 163 | 1.28TR | item163 | 3 | Each |
| 164 | 164 | 1.59 TR | item164 | 3 | Each |
| 165 | 165 | 2.02 TR | item165 | 1 | Each |
| 166 | 166 | AIR CONDITIONING (HVAC) (AHU, Refrigerant piping with Gas charging, Ducting, Insulation work etc.)\nSupply & Installation of High Static Duct Units of following capacities.\n2.02TR | item166 | 1 | Each |
| 167 | 167 | Supply & Installationof VRF-AHU along withExpansion and communication Kit of following capacities. \na) AHU Specification :\nSkin Type : Double skin with mm Pre Coated GI Outer & mm Plain G.I. Inner\nFrame work : Thermal Break Al. Profile with Thermal Barrier\nPanels : 43mm thick, CFC Free Kg/Cu M Density PUF Injected\nDrain Pan : 1mm SS Primary Tray with 0.6mm GI Covering sheet & sandwiched insulation of 25mm thick PUF in between\nUnit Base : GSS base channel\nCoil Type : DX suitable for R-410; Copper; 12 FPI; 500 CFM/Sq Ft; Target ADP: 10.5 deg C (No of Rows of Coil & Distributor to be suiatble for the condenser capacity & model selected)\nPre Filter : EU-4; 90% effency down to 10 Micron; Box Type; Filter Face velocity : 500 FPM\nFine Filter : EU-7; 90% effency down to 0.3 Micron; flange type; Filter Face velocity : 500 FPM\nFan Section : 1200CFM / 150mm wg SP / Fan Outlet Velocity 9 m/s; DIDW Backward Curved; EFF-1 Motor\nDamper : SA, RA, FA damper in leak proof Aluminium Construction | item167 | 1 | Each |
| 168 | 168 | Expansion Kit for AHU | item168 | 1 | Each |
| 169 | 169 | Communication Kit for AHU | item169 | 1 | Each |
| 170 | 170 | Supply of Wireless Remote | item170 | 12 | Each |
| 171 | 171 | Supply of Wired Remote | item171 | 1 | Each |
| 172 | 172 | Supply of Refnet joints of minimum thickness as that of refrigerant piping | item172 | 13 | Each |
| 173 | 173 | LAMINAR AIR FLOW UNIT FOR OT (Ceiling mounted)\nDesign, Supply , Installation & Commissioning of the laminar air flow unit made from 1.2mm thick Stainless Steel with necessary stiffness. LAF unit also to include Hepa Filters designed to remove particles down to 0.3 microns from air streams with an efficiency of 99.97 % & Perforated SS grills. Also it should have suitable provision with flanges to connect the Supply Air duct with necessary accessories.\nLFU Size: 1200 x 1200 mm\nComprising of Terminal EU 13 HEPA Filters of 99.997% Efficiency down to 0.3 Micron particle size installed in zero leakage All. frame with SS perforated plate type SA grille with VCD\nMin 1000 CFM | item173 | 1 | Each |
| 174 | 174 | Supply, Installation, Testing & Commissioning of refrigerant piping connecting indoor unit & outdoor units including thermal insulation. Refrigerant piping shall be made of hard drawn copper pipe suitable for variable refrigerant flow system including all fittings, i.e. bends, elbows, tees with an internal joint type fitting etc. Pipiline must be tested for requisit pressure. Max. support distance shall be 8 ft. All refrigerant piping shall be insulated with min. 13 & 19 mm thk. nitrile rubber based insulating material as per the following: \n34.9 mm O.D.(Insulation : 19mm suction/13 mm liquid) | item174 | 8 | RMT |
| 175 | 175 | 28.6 mm O.D.(insulation : 19 mm suction/13 mm liquid) | item175 | 22 | RMT |
| 176 | 176 | 22.2 mm O.D.(insulation : 19 mm suction/13 mm liquid) | item176 | 12 | RMT |
| 177 | 177 | 19.1 mm O.D.(insulation : 19 mm suction/13 mm liquid) | item177 | 10 | RMT |
| 178 | 178 | 15.9 mm O.D.(insulation : 19 mm suction/13 mm liquid) | item178 | 24 | RMT |
| 179 | 179 | 12.7 mm O.D.(insulation : 19 mm suction/13 mm liquid) | item179 | 56 | RMT |
| 180 | 180 | 9.5 mm O.D.(insulation : 19 mm suction/13 mm liquid) | item180 | 27 | RMT |
| 181 | 181 | 6.4 mm O.D.(insulation : 19 mm suction/13 mm liquid) | item181 | 46 | RMT |
| 182 | 182 | 3C x 1.5 mm2 Cu (Comunication cable from ODU to IDU for VRF units) | item182 | 110 | RMT |
| 183 | 183 | Supply, Installation, Testing & Commissioning of drain piping from hard drawn CPVC material as per following sizes and duly insulated with 9 mm nitrile rubber insulation\n32 mm dia | item183 | 20 | RMT |
| 184 | 184 | 25 mm dia | item184 | 50 | RMT |
| 185 | 185 | Extra Refrigerant Gas Charging\nR410A Refrigerant | item185 | 10 | Kgs |
| 186 | 186 | Supply, erection, testing & commissioning of machine made GSS ducting to be fabricated from CRCA GI sheet conforming to IS 277. Duct shall be fabricated as per IS 655. Ducting shall be complete with elbows, turning ven, volume control dampers/PVC gaskets, GI fully threded rods, GI supports/hangers etc. Duct pressure shall be class-1\" WG with intermediate bracing \n24G | item186 | 45 | Sqm |
| 187 | 187 | DUCT THERMAL INSULATION\nThermal insulation of SA / RA duct insulation with 13 mm thick aluminium foil laminated nitrile rubber (class \"O\") insulation sealed with Aluminium tape of 50mm width.Conductivity - 0.037 at 20 Deg C & Density 40-60 Kg / M3 +/- 10%. | item187 | 25 | Sqm |
| 188 | 188 | 19 mm For Supply / Return air Ducting including cladding with 26G AL sheet finish ( Exposed supply air ducts) | item188 | 15 | Sqm |
| 189 | 189 | Supply and fixing of acoustic lining inside sheet metal ducts with 10 mm elastrometric nitrile rubber of density 150Kg/cub.mtr and thermal conductivity of 0.036 W/m k. | item189 | 15 | Sqm |
| 190 | 190 | Supply, erection, testing & commissioning of extruded aluminium linear Grille with and without MS VCD\nSupply air Griles with VCD | item190 | 0.5 | Sqm |
| 191 | 191 | Return air Grilles without VCD | item191 | 0.75 | Sqm |
| 192 | 192 | Canvas Connection | item192 | 2 | Nos |
| 193 | 193 | Underdeck Insulation of 50 mm thick EPS 20kg/cu.m density. | item193 | 260 | Sqm |
| 194 | 194 | Third Party Validation for OT | item194 | 1 | lot |
| 195 | 195 | MEDICAL GAS PIPELINE SYSTEM :\nIndigenous Medical Grade Copper Tube / Piping: \nCopper Pipes used is chemically tested as per BS 6017, 1981 and manufactured as per BS : 2871, on half hard condition, solid drawn, seamless, dioxides, non-arsenical, degreased and round \n12 mm. OD X 0.7 MM. Thick. | item195 | 14 | Mtr. |
| 196 | 196 | 15 MM. OD X 0.9 MM. Thickness | item196 | 97 | Mtr. |
| 197 | 197 | 22 MM. OD x 0.9 MM. Thickness | item197 | 120 | Mtr. |
| 198 | 198 | 28 MM. OD x 0.9 MM. Thickness | item198 | 65 | Mtr. |
| 199 | 199 | Oxygen System\nPB-Type Double-locking O2 Outlet Points.(Punitan-Bennett type /Amico type) | item199 | 2 | Each |
| 200 | 200 | Oxygen Flow meter complete with Humdifier Bottle. | item200 | 2 | Each |
| 201 | 201 | Oxygen Flow meter Adapter. | item201 | 2 | Each |
| 202 | 202 | Nitrous Oxide System\nPB-Type Double-locking N2O Outlet Points with adapter (Punitan-Bennett type /Amico type). | item202 | 2 | Each |
| 203 | 203 | Compressed Air System\nDouble-locking Air 4 Bar Outlet Points with adapter (Punitan-Bennett type /Amico type). | item203 | 2 | Each |
| 204 | 204 | Medical Vacuum Plant System\nDouble-locking Vacuum Outlet Points with adapter(Punitan-Bennett type /Amico type). | item204 | 2 | Each |
| 205 | 205 | Ward Vacuum Unit with one Vacuum regulator and along with 600ml polycarbonate Jar | item205 | 1 | No. |
| 206 | 206 | LP Tubing: Supply Low pressure tubing | item206 | 10 | Mtr. |
| 207 | 207 | Isolation Valve\n15 MM. | item207 | 4 | Each |
| 208 | 208 | 22 MM. | item208 | 2 | No. |
| 209 | 209 | Microprocessor based Digital type Line Pressure Alarm \nArea Alarm 4 Gases | item209 | 1 | Each |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
