Food Corporation Of India-FCI has published Replacement Of Ac Sheet To Precoated Profile Sheet Roofing Of Godowns At Fsd Kargiroad Replacement Of Ac Sheet To Precoated Profile Sheet Roofing Of Godowns At Fsd Kargiroad .. Submission Date for this Tender is 30-01-2020. Shed Construction Tenders in FCI FSD Kargiroad Chhattisgarh. Bidders can get complete Tender details and download the document.
Name of Work: Replacement of AC sheet to precoated profile sheet roofing of godowns at FSD Kargiroad | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. | 3625 | kg | |
2 | 2 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: | |||
3 | 2.1 | G.S. Sheet | 468 | sqm | |
4 | 2.2 | Asbestos Cement sheet | 11170 | sqm | |
5 | 3 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 11320 | sqm | |
6 | 4 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | |||
7 | 4.1 | Ridges plain (500 - 600mm) | 403 | metre | |
8 | 5 | Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand & manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. | 1290 | metre | |
9 | 6 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | 1015 | metre | |
10 | 7 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : | |||
11 | 7.1 | In 75x75 mm deep chase | 775 | metre | |
12 | 8 | Brick work with common burnt clay non modular bricks of class designation 3.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) | 34 | cum | |
13 | 9 | 12 mm cement plaster of mix : | |||
14 | 9.1 | 1:6 (1 cement: 6 fine sand) | 150 | sqm | |
15 | 10 | Supply ,Installation, Testing and commisssioning of turbo ventilators size 22" of stainless steel 430 grade having approximate weight 4.85 kg. The ventilator should have air absorption of 7 km/hr, 2440 CFM with blade 369 mm, wings of 80 mm, outerwings : 22"-24 nos., inner wings 22" -6nos., with self lubricating ball bearings etc., complete as per manufacturer's specifications and stainless steel base plate etc. as per directions of Engineer-in-charge including cutting of existing pre-coated sheet. | 36 | each | |
16 | 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : | |||
17 | 11.1 | One or more coats on old work | 2135 | sqm | |
18 | 12 | Credit for taking away the dismantled materials on :AS IS WHERE IS BASIS" and on actual measurement etc. complete as per direction of Engineer-in-charge: AC sheet | 11170 | sqm | |
19 | 13 | Credit for taking away the dismantled materials on :AS IS WHERE IS BASIS" and on actual measurement etc. complete as per direction of Engineer-in-charge: GI sheet/ iron scrap material/J hhoks/L hooks etc. | 3375 | kg |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail