| 1 | 1 | Gym equipments, dustbins and bench. | BI01010001010000000000000515BI0100001112 | | |
|---|
| 2 | 1.01 | Double Seat Thurster.Dimention : 2050*700*1900, Main Post Diameter : 140mm, Other Pipe Diameter : Pipe Wall Thickness:2.75~ 3mm,SEAT FRAME : 32 NB GI B-CLASS ,Pipe,Handle cover : TPEE injection moulded,SEAT & BACK REST : LLDP Rotomoulded seat,BOTTOM COVER : Base Cover for 140 NB -Nylon 66 injection moulded.BEARINGS : REPUTED MAKE (FAG/SKF),BEARING HOUSING AND PIN :Seamless Pipe & Round Bar,POWDER COAT : DONE BY PURE POLYESTER POWDER WITH 70 80 MICRON THICKNESS. | BI01010001010000000000000515BI0100001113 | 2 | Each |
|---|
| 3 | 1.02 | Providing and fixing in position 3 seaters Designer Bench of approved design and make of minimum area 1.5 meter x 0.60meter. Overall all minimum height 0.80 m consisting of \n1. FRP Channel Strip-seat & back with end cap- (C - Section of thickness upto 5mm ,1200mm long with wooden finish bolted to side frames.)\n2. BENCH FRAME (cast iron designer frame conforming to IS 1730 made from sand casting method)\n. | BI01010001010000000000000515BI0100001114 | 5 | Each |
|---|
| 4 | 1.03 | The dustbins are made of FRP in different cartoon shapes and painted with attractive colours. The dust bins are of height 4’ and having facility to drop waste from front and remove them from behind door. The dust bins are having facility to anchor ate site with cement concrete. | BI01010001010000000000000515BI0100001115 | 8 | Each |
|---|
| 5 | 1.04 | Shoulder RehabilitationDevice-Dimention :1300*1050*1420, Main Post Diameter : 140mm, Pipe Wall Thickness:2.75~ 3mm,HANDLE FRAME : 32 NB GI B-CLASS Pipe,SPINNING RING : LLDP ROTOMOULDING WHEEL,BOTTOM COVER : Base Cover for 140 NB -Nylon 66 injection moulded,PIPE CAP : Nylon 66 injection moulded.Bearing REPUTED MAKE (FAG/SKF),BEARING HOUSING AND PIN :Seamless Pipe & Round Bar,POWDER COAT : DONE BY PURE POLYESTER POWDER WITH 70 80 MICRON THICKNESS | BI01010001010000000000000515BI0100001116 | 2 | Each |
|---|
| 6 | 1.05 | Surfboard.Dimention : 1120*830*1420, Main Post Diameter : 140mm, Pipe Wall Thickness:2.75~ 3mmHANDLE FRAME : 25 NB GI B-CLASS Pipe \nCLAMPS : NYLON 66 INJECTION MOULDED CASING\nSEAT REST : LLDP Rotomoulded seat.\nBOTTOM COVER : Base Cover for 100 NB -Nylon 66 injection moulded.\nPIPE CAP : Nylon 66 injection moulded.\nBEARING CAP : Nylon 66 injection moulded.\nBEARING HOUSING AND PIN :Seamless Pipe & Round Bar\nNUT BOLTS CAP : Nylon 66 injection moulded with SS M6 fastners.\nBEARINGS : PERMANENT SEALED OF REPUTED MAKE (FAG/SKF)\nNUT BOLTS : STAINLESS STEEL M6 x 20, GALVANISED NUT BOLTS.\nPOWDER COAT : DONE BY PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS.\n | BI01010001010000000000000515BI0100001117 | 2 | Each |
|---|
| 7 | 1.06 | Waist Twisting Table,Dimention : 1800*1600*1350,TWISTER DISC : LLDP Rotomoulded seat.\nPIPE CAP : Nylon 66 injection moulded.\nBEARING CAP : Nylon 66 injection moulded.\nBEARING HOUSING AND PIN :Seamless Pipe & Round Bar\nNUT BOLTS CAP : Nylon 66 injection moulded with SS M6 fastners.\nBEARINGS : PERMANENT SEALED OF REPUTED MAKE (FAG/SKF)\nNUT BOLTS : STAINLESS STEEL M6 x 20, GALVANISED NUT BOLTS.\nPOWDER COAT : DONE BY PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS.\n\nMain Post Diameter : 140mm,\nPipe Wall Thickness:2.75~ 3mm, | BI01010001010000000000000515BI0100001118 | 2 | Each |
|---|
| 8 | 1.07 | Abdominal Stretching Stand,Dimention : 1800*1600*1350, Main Post Diameter : 140mm, Pipe Wall Thickness:2.75~ 3mm | BI01010001010000000000000515BI0100001119 | 2 | Each |
|---|
| 9 | 1.08 | Double Seat Tensioner,Dimention : 2050*750*1650, Main Post Diameter : 140mm, Other Pipe Diameter : Pipe Wall Thickness:2.75~ 3mm,SEAT FRAME : 32 NB GI B-CLASS Pipe \nMAIN FRAME : 40 NB GI B-CLASS Pipe \nHANDLE FRAME & LEG REST : 32NB & 25NB GI B-CLASS PIPE WITH TWO HANDLES\nHandle cover : TPEE injection moulded\nSEAT & BACK REST : LLDP Rotomoulded seat.\nBOTTOM COVER : Base Cover for 100 NB -Nylon 66 injection moulded.\nPIPE CAP : Nylon 66 injection moulded.\nBEARING CAP : Cap for 100 NB -Nylon 66 injection moulded.\nBEARING HOUSING AND PIN :Seamless Pipe & Round Bar\nBEARINGS : REPUTED MAKE (FAG/SKF)\nNUT BOLTS CAP : Nylon 66 injection moulded with SS M6 fastners.\nNUT BOLTS : STAINLESS STEEL M6 x 20, GALVANISED NUT BOLTS.\nPOWDER COAT : DONE BY PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS.\n | BI01010001010000000000000515BI0100001120 | 2 | Each |
|---|
| 10 | 1.09 | Double Wheel,Dimention :930*750*2030, Main Post Diameter : 140mm, Pipe Wall Thickness:2.75~ 3mm,BOTTOM COVER : Base Cover for 100 NB -Nylon 66 injection moulded.\nPIPE CAP : Nylon 66 injection moulded.\nBEARING CAP : Cap for 100 NB -Nylon 66 injection moulded.\nBEARING HOUSING AND PIN :Seamless Pipe & Round Bar\nBEARINGS : REPUTED MAKE (FAG/SKF)\nNUT BOLTS CAP : Nylon 66 injection moulded with SS M6 fastners.\nNUT BOLTS : STAINLESS STEEL M6 x 20, GALVANISED NUT BOLTS.\nPOWDER COAT : DONE BY PURE POLYESTER POWDER WITH 70- 80 MICRON | BI01010001010000000000000515BI0100001121 | 2 | Each |
|---|
| 11 | 1.1 | Supply of Life Buoy Ring for boats .The Life Buoy Ring are bright orange cross-linked polyethylene outer shell that will not rot or mold and iis un affected by extreme weather or prolonged outdoor exposure. | BI01010001010000000000000515BI0100001122 | 10 | Each |
|---|
| 12 | 1.11 | Providing and fixing in position 3 seaters Designer cement concrete Bench (back rest) of approved design and make of minimum area 1.5 meter x 0.60meter. Overall all minimum height 0.80 m consisting of \ncement concrete with wooden finish including fixing | BI01010001010000000000000515BI0100001123 | 5 | Each |
|---|
| 13 | 2 | Repair of play equipments | BI01010001010000000000000515BI0100001124 | | |
|---|
| 14 | 2.01 | Repair and renovation of existing Double deck multi play unit by uprooting, sand paper rubbing, welding of defective parts and scrubbing of existing paint, repainting with 1 coat of Epoxy Primer and 2 coats of PU Paints of different colours, replacing the defective items ,1. FRP SPIRAL SLIDE – 01 No,2. FRP WAVE SLIDE – 01 No,3. FRP DECK – 02 Nos | | 1 | Job |
|---|
| 15 | 2.02 | Repair and renovation of existing Multi Deck Multi Play Unit by uprooting, sand paper rubbing, welding of defective parts and scrubbing of existing paint, repainting with 1 coat of Epoxy Primer and 2 coats of PU Paints of different colours, replacing the defective items ,1. FRP DELUXE PLAIN SLIDE – 01 No,2. FRP WIDE SLIDE – 01 No,3. FRP DECK – 04 Nos,4. RUBBER NET CLIMBER -01 No,5. HANGING BRIDGE – 01 No | | 1 | Job |
|---|
| 16 | 2.03 | Repair and renovation of existing Multiple Play Equipments by uprooting, sand paper rubbing, welding of defective parts and scrubbing of existing paint, repainting with 1 coat of Epoxy Primer and 2 coats of PU Paints of different colours, replacing the defective items ,1. SWING – 03 Nos,2. FRP DELUXE WAVE SLIDE – 01 No,3. BUTTERFLY – 01 No,4. SPIDER WEB CLIMBER - 01 No,5. FUNNEL CLIMBER -01 No,6. FRP MERRY-GO-ROUND – 01 No,7. JUNGLE GYM – 01 No,FRP walking shelter-04 n0s | | 1 | Job |
|---|
| 17 | 3 | Fixing of toy train | BI01010001010000000000000515BI0100001128 | | |
|---|
| 18 | 3.01 | S/F fixing of TOY TRAIN \nModel: Standard with Canopy Capacity: 22 Seater. (Engine=2nos + Boggy 5 x 4=20 nos,) Material Type: The Engine and Boggy is made of GI Rectangular pipes encased with FRP Body and fitted on a Train Wheel Mechanism. The wheels are made of Cast Iron. Motor: 1 no of PMDC geared motors of 1750 watt. Power Supply: DC voltage in Track from External Control Panel with speed control. Control Panel: Toy Train Control Panel shall be with an analogue dimmer and an isolation transformer to provide controlled DC power to the Train Track. The Control Panel shall be an external one shall be installed near by the Track.Power Supply: 90 volt DC in Track from External Control Panel.\nS/F fixing of TOY TRAIN | BI01010001010000000000000515BI0100001129 | 1 | EACH |
|---|
| 19 | 3.02 | S/F fixing of TOY TRAIN TRACK\nTrack Length : 200 (approx.) rft in capsule format. \nTrack Shape: Capsule.\nMaterial Type: “T’ shape 40 x 40 mm MS Channel mounted on 2” x 2” wooden sleepers | | 200 | Rft |
|---|
| 20 | 4 | Fitting and fixing of fountains | | | |
|---|
| 21 | 4.01 | Renovation of existing Floating Sky Jet with Multiple Swivel Jets Fountain \nBy replacing the Brass nozzle kit to a new nozzle kit of Sky Jet with Multiple swivel Jets fountain fitted on a GI pipe hydraulics mechanism. Also the cables of Cabling - 3C * 6 sq.mm Submersible cable for pump and 4 * 4 sq. mm cable for lighting up to 100 mtr. from float to panel.\nNew Under Water LED lights - 18 nos. 12v/18w multicolor type with – programmable sequencer to create a Rainbow effect, SS finish body with heat sink, ip 68 type. Control Panel - Weather proof Control Panel made of 14gz MS sheet with all protection devices and starter for upto 10hp pump. DC power supply for LED Lights with colour sequencer.\n | | 1 | EACH |
|---|
| 22 | 4.02 | Water Rocket Fountain-8ft. dia G. I. rings made of 50 mm NB GI pipes fitted with 50nos. 3/8” Brass heavy Swivel Nozzles forming a foaming outward Crown and a 6ft. dia G. I. rings made of 50 mm NB GI pipes fitted with 56nos. 3/8” Brass heavy Swivel Nozzles forming a foaming inward Crown in total forming a launching rocket shape (As shown in figure). Each nozzle is fully adjustable for a precision effect.Pool Size Required-15 feet Dia (ID)Water Effect Height-Center: 12ft. height (approax.)Pump-3 phase Open well submersible pump of 5 hp – 1no.Control Panel / Cable-Control Panel for Pump and Light. Cable up to 10mtrs from pool to panel. More than that is chargeable @ 350/- per mtr. Power Cable up to panel is customer’s responsibility.Pool and Civil Work-As per Design provided to be done by Client.\nOuter: 5ft. height (approax.)Lights-Waterproof RGB LED Light of 12 volt DC 15 nos. | | 1 | EACH |
|---|
| 23 | 4.03 | Multiple Geyser Fountain.Water Pattern-Seven nos of Geyser nozzles fitted on a circular multilayer GI pipe frame throwing heavy milkiest water in to air creating a beautifun and cool ambience.Water Effect Height-Centre Geyser Jet = 7 ft. height (Approax)Pool Size Required-15 ft dia Pool.Pump-Three Phase Open well submersible pump of 7.5hp – 1no.Lights-Waterproof RGB LED Light of 12 volt DC 15 nos.\nSurrounding Geyser Jets = 4 ft. height (Approax)Control Panel / Cable-Control Panel for Pump and Light. Cable up to 10mtrs from pool to panel.\n | | 1 | EACH |
|---|
| 24 | 8.02 | Architectural blade fall | | 1 | EACH |
|---|
