Execution Of Work With Material Execution Of Work With Material Under Mw Ow To Staff Quarter At Chandreh Distt . Sidhi, Chandreh Distt. Sidhi-Madhya Pradesh

Execution Of Work With Material Execution Of Work With Material Under Mw Ow To Staff Quarter At Chandreh Distt . Sidhi - 1 Grading roof for water proofing treatment with cement concrete 1:2:4 (1 cement, 2 coarse sand, 4 graded stone aggregate 20mm nominal size) 2 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir, sewage & water treatment plant, tunnels/ subway and bridge deck etc, prepared by mixing in the ratio of 5:2 (5 parts integral crystalline slurry: 2 parts water) for vertical surface and 3:1 (3 parts integral crystalline slurry: 1 part water) for horizontal surface and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete as per DIN 1048 and resistant to 16bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to 1 width of 0.50mm.The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage for horizontal surface one coat@1.10kg per sqm. 3 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50meters lead: of area 3 sq. meters and below 4 Providing and fixing on position factory made precast RCC M-40 fixing with hold fast embedded in 1:3:6 concrete block for doors and windows frames having excellent smooth finish as per IS: 6523 with reinforcement of 3Nos. 6mm dia main bars tied with 3mm M.S. stirrups placed @ 200mm C/c and 6 numbers high strength polymer blocks of required size for fixing hinges including providing 6 no. specially designed M.S. galvanized sleeves for accommodating 6mm dia fully threaded bolts for fixing hold fast on vertical members, providing suitable arrangement for receiving sliding door bolts and tower bolt etc. all complete, as per the direction of engineer-in-charge. The frame shall be measured in running meter correct to two place of decimal 5 Door frame 125mmX60mm 6 Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutter for doors, windows and clearstory window (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneleld and glazed shutters 25mm to 40mm tick: second class teak wood. 7 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (pat-I) decorative types, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters 35mm thick including ISI marked stainless steel butt hinges including ISI marked stainless steel butt hinges with necessary screws 8 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. Providing and laying plain fanti plaster 12 mm thick on internal face in (1:6) CM preparing the surface well watered before plastering including scaffolding, finishing and curing as directed by engineer-in-charge etc. complete. 9 Providing and laying plain fanti plaster 12mm thick on internal face in (1:6) C.M. preparing the surface well watered before plastering including scaffolding, finishing and curing as directed by Engineer-In-Charge etc. complete. 10 Providing and applying white wash in 2 coats on new plastered surface including scaffolding and preparing the surface by brushing and booming down as directed by Engineer-In-Charge etc. complete. 11 Providing and laying cast in situ/cement concrete M-10(1:3:6) 50 mm thick for plinth protection over 75 mm thick bed or dry brick ballast 40 mm nominal size, well ramped, well consolidated and grouted with fine sand, including necessary excavation leveling, dressing, finishing the top smooth and curing as directed by Engineer-In-Charge etc. complete.

INR 500 /-

INR 6060.0 /-

INR 2.42 Lakhs /-