National Institute Of Science Education And Research has published Provision Of Shed And Platform For Ahu Chiller Unit And Dg Set Near Animal House Niser Jatani. Submission Date for this Tender is 09-01-2020. Shed Construction Tenders in NISER BBSR Odisha. Bidders can get complete Tender details and download the document.
| Name of Work: Provision of Shed and Platform for AHU, Chiller Unit & DG set near Animal House, NISER, Jatani. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. Ordinary rock | Item1 | 110.25 | Cum |
| 2 | 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | Item2 | 31.68 | Cum |
| 3 | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) | Item3 | 29.99 | Cum |
| 4 | 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) | Item4 | 18.32 | Cum |
| 5 | 5 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete | Item5 | 3889 | Kg |
| 6 | 6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Item6 | 4050 | Kg |
| 7 | 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | Item7 | 0.3 | Cum |
| 8 | 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | Item8 | 2234.4 | Kg |
| 9 | 9 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete | Item9 | 38.4 | Sq. M |
| 10 | 10 | Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:4 (1 cement : 4 coarse sand) | Item10 | 66.9 | Cum |
| 11 | 11 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand): outside | Item11 | 223 | Sq. M |
| 12 | 12 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand): inside | Item12 | 223 | Sq. M |
| 13 | 13 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal as well as L-hooks complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | Item13 | 437.5 | Sq. M |
| 14 | 14 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work | Item14 | 500 | Sq. M |
| 15 | 15 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work. | Item15 | 400 | Sq. M |
| 16 | 16 | Providing and fixing on wall face 110mm dia unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382 .(single socketed pipe) | Item16 | 40 | Meter |
| 17 | 17 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC waste water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382.\n | |||
| 18 | 17.1 | 110 mm bend | Item18 | 10 | Nos |
| 19 | 17.2 | 110x110x110 mm | Item19 | 10 | Nos |
| 20 | 18 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover | Item20 | 18 | Sq. M |
| 21 | 19 | Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured). | Item21 | 18 | Sq. M |
| 22 | 20 | Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area | Item22 | 15 | Sq. M |
| 23 | 21 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | Item23 | 60 | Sq. M |
| 24 | 22 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | Item24 | 80 | Sq. M |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
