Sales : +91-777 804 8217
| Name of Work: Construction of Court Building/ Residential Quarters ( Excluding cost of Cement And Electric Works ) at Srimadhopur (3-Works) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | Earth work in surface excavation not exceeding 30 Cm. In depth but exceeding 1.5 meter in width as well as 10 Sam. on plan including disposal of excavated earth up to 50 Mtr. And lift up to 1.5 Mtr. Disposed soil to be leveled and neatly dressed : All kinds of soil. | 980 | Sqm | |
| 2 | 1.02 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 Mtr including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 m all lead of soil. | 2305 | Cum | |
| 3 | 1.03 | Providing and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment ) | 1619 | Sqm | |
| 4 | 1.04 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).Excl Cost of Cement | 714 | Cum | |
| 5 | 1.05 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. up to plinth level. | 2023 | Sqm | |
| 6 | 1.06 | Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering and reinforcement including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints and Admixtures in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-20 grade reinforced cement concrete. All work up to plinth level (Excl Cost of Cement )\nProviding M-25 grade R.C.C. instead of M-20 grade R.C.C. | 715 | Cum | |
| 7 | 1.07 | Random Rubble stone masonry in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand).(Excl Cost of Cement ) | 725 | Cum | |
| 8 | 1.08 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth , consolidating each deposited layer by ramming and watering including lead upto 50Mtr. and lift upto 1.5Mtr. | 2800 | Cum | |
| 9 | 1.09 | Carriage of earth, sand, lime, morrum, mannure or slab etc. including loading, unloading & staking as per specification etc. complete with lead of 10.0 km. | 2800 | Cum | |
| 10 | 1.1 | Brick work in superstructure above plinth level upto floor iii level with bricks of class designation 100 in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)-(Excl Cost of Cement ) | 795 | Cum | |
| 11 | 1.11 | Add extra for brick work in.Square or Rectangular Pillars.\n\n | 203 | cum | |
| 12 | 1.12 | Half brick masonry in superstructure up to third story using bricks of designation 100 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement 1Sqm. 6mm MS bar 2x2x1.00 = 4.00 Cement mortar 1:4 (1-Cement:4-coarse sand). (Excl Cost of Cement ) | 3118 | Sqm | |
| 13 | 1.13 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for:\nColumns, pillars, posts and struts etc. | 1693 | Sqm | |
| 14 | 1.14 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for super structure up to height of 4.5m for Suspended floors, roofs landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam etc. \nAdd extra for using steel props and bressings etc. instead of wooden mamber over item Nos. 4.12.1 to 4.12.3 | 4881 | Sqm | |
| 15 | 1.15 | Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements excluding the cost of centering, shuttering and reinforcement including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints and admixtures in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-20 grade reinforced cement concrete. All work from plinth level up to floor three level.\nBeams, plinth beams, girders, bressumers, cantilevers, suspended floors, lintels, roofs and staircases including spiral staircases, shelves etc.\nProviding M-25 grade R.C.C. instead of M-20 grade R.C.C.(Excl Cost of Cement ) | 875 | Cum | |
| 16 | 1.16 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. TMT BAR | 178000 | Kg. | |
| 17 | 1.17 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick.(Excl Cost of Cement ) | 8763 | Sqm. | |
| 18 | 1.18 | Add extra over item No. 12.1 to 12.12 for plaster work on exterior wall of height more than 4.5M. from plinth level of every additional height of 4.5 Mtr. or part thereof. | 1870 | Sqm. | |
| 19 | 1.19 | Making grooves as per design in plaster 10mm to 20mm wide. | 2500 | Rmt. | |
| 20 | 1.2 | Providing & laying vitrified Porcelain dianomite floor tile, skirting, dedo, (Johnso, Euro, Naveen, Bell or equivalent etc.) size 600x600, 10 mm thick flooring over 20 mm thick bed mortar 1:4 mix with 2-3 mm thick joint to be filled with cementious grout or polymer based non shrink grout make Rofee/ Bell adhesive/ pidite etc of matching colour as per requirement of site.(Excl Cost of Cement ) | 1804 | Sqm | |
| 21 | 1.21 | Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300x450 or 400x400 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). Category-I : Kajariya, Jhonson, Orient, Somani make etc for marble printed, granite shade tile.(Excl. Cost of Cement ) | 205 | Sqm | |
| 22 | 1.22 | Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 coloured tile expect white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).(Excl Cost of Cement ) | 177 | Sqm | |
| 23 | 1.23 | Providing and fixing 14 mm Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of: Jhunjhunu / Jalore (Red / Choclate Colour) (Excl Cost of Cement ) | 1780 | Sqm | |
| 24 | 1.24 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :\n(A) 25 mm thick slab.(Excl Cost of Cement ) | 299 | Sqm | |
| 25 | 1.25 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: \nTwo or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. | 6944 | Sqm | |
| 26 | 1.26 | Grading roof water proofing treatment with : Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size).(Excl Cost of Cement ) | 123 | Cum | |
| 27 | 1.27 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design.(Excl Cost of Cement ) | 530 | Mtr | |
| 28 | 1.28 | Providing and fixing of uPVC Sliding windows: Frame Made from the Extruded uPVC Window Profile Section of size 106w x 50h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2 mm thick GI section. Frame shall have three track configuration, two for sliding of window shutter and one for mosquito mesh shutter. Vertical member of frame which bears the sliding shutter load shall have aluminium rail/track for smooth sliding of shutter rollers. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side.\nShutter : The shutter of sliding window shall be made of 39w x 69h mm Extruded 3 box multi- chamber uPVC Window Profile Section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI section duly mitered cut & thermal welded at all corners and fitted with uPVC glazing bead of size 22 x 20 mm with inner and outer co-extruded EPDM/TPE-E weather seal gaskets alongwith 6mm thick ISI make plain float glass. Mesh shutter shall be made of 39w x 69h mm Extruded 3 box multi-chamber UPVC Window profile section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5 mm thick GI section duly mitered cut & thermal welded at all corners and fitted with nylon/polymer mesh and rollers/pully. | 216 | Sqm. | |
| 29 | 1.29 | Providing & Fixing Casement Window complete, consisting of UPVC frame of size 62mmX58mm with 1.5mm/2mm thick GI reinforcement, wherever required , manufactured in ISO 9001:2000 and 14001 certified company. The window shutter shall consist of 75mmX62mm with 5mm thick toughened glass along with complete Zinc powder coated fittings, friction hinges, gear and handle for operating window. Window frame shall be fixed with virgin quality plugs and MS screw. Sealing shall be done with silicon sealant. All the four corners shall be mitred cut and thermal welded and fitted with UPVC glazing bead of size 36mmX20mm, with inner and outer co-extruded with and outer EPDM/TPE weathergaskets fitted in in built groove of frame profile for proper air and sound insulation. Frame shall be milled with drain and air equaliser hole , in order to be water tight and for drainage of accumulated water if any, to outer side. Locking system of window shall be provided with multi point transmission gear ( ESPAG ) with white finish. Complete window shall be installed with 10mmX100mm fasteners with white cap in existing prefinished wall cut out cemented to glass level plane at all height and width. All welding joints of frame and shutter shall be cleaned and milled with CNC mechanism to provide uniform good finish on all visible joints. Windows shall be partly fixed and partly openable. \nRate shall be inclusive of all risks & costs involved in labour, material, production process, machinery , T & P, contingencies, fittings and fixtures, testing, loading, transportation, unloading, installation, taxes/cess/levies fixing/assembling at site of work , complete in all respect, as per standards , drawings, specifications and directions of Engineer-in-Charge. White Colour.\n | 20 | Sqm | |
| 30 | 1.3 | Providing and fixing Square bars or other flat welded to window, ventilators etc. | 3560 | Kg | |
| 31 | 1.31 | Providing & fixing precast cement concrete coping 1:2:4 mix 50 mm thick complete as per specification : --50mm-- | 339 | Sqm | |
| 32 | 1.32 | Supply and fixing in cement mortar welded hand railing made out of M.S. round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. | 619 | Kg | |
| 33 | 1.33 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' :\n35 mm thick .\nCommercial Veneer both side\n Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured)\nExtra for providing other type of fittings as mention in annexure A ( as approved by EI) :\nStainless steel fittings | 265 | Sqm | |
| 34 | 1.34 | Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge.\n0.8mm thick mica | 530 | Sqm | |
| 35 | 1.35 | Providing and fixing factory made of uPVC Extruded section having an overall dimension as below (tolerance+/-1mm) with wall thickness 2.0mm+/-0.2mm,corners of the door frame to be mitred and welded of plastic ,galvanized brackets and stain less steel screws.The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19x19mm and 1mm+/-0.1mm wall thickness and 3 nos.stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge.\nExtruded section profile size 42x50 mm \n | 50 | Rmt. | |
| 36 | 1.36 | Providing and Fixing mortice lock of : Godrej make with brass handles. | 10 | Each | |
| 37 | 1.37 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. | 1450 | Sqm | |
| 38 | 1.38 | Sipplying and fixing machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges: Kota stone 25 to 30 mm thick.(Excl Cost of Cement ) | 280 | Sqm | |
| 39 | 1.39 | Providing and laying Chequerred plain cement concrete embossed specially manufactured non-slipping tiles of approved make 20 mm thick laid on 20 mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete.(Excl Cost of Cement ) | 406 | Sqm | |
| 40 | 1.4 | Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.) with glass panes of 5.0mm thickness (weight not less than 13.75 Kg/Sqm) as per IS : 2835 | 96 | Sqm | |
| 41 | 1.41 | Finishing with neat cement (Punning)(Excl Cost of Cement ) | 87 | Sqm | |
| 42 | 1.42 | 6mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand)(Excl Cost of Cement ) | 3332 | Sqm | |
| 43 | 1.43 | Appling Birla/J.K.Cement based putty over Cement plaster Surfce for making even surface. | 8800 | Sqm | |
| 44 | 1.44 | Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat including scaffolding and safety provision \nTrowel Finish av. thickness 1500 to 2000 microns | 2902 | Sqm | |
| 45 | 1.45 | Crazy marble stone flooring 20 mm thick marble stone with black or of specified colour topping including filling the gaps with cement marble chips mix in proportion of 4:7 (4-Cement:7-White black or white or black marble chips) size from 1 mm to 4 mm by volume and under layer of 25 mm thick cement concrete [1:2:4, graded stone aggregate 12.5 mm nominal size] rubbing and polishing and cement slurry etc. complete :In ordinary cement. (Excl Cost of Cement ) | 1650 | Sqm | |
| 46 | 1.46 | Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25 mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile 'C' | 651 | Mtr | |
| 47 | 1.47 | Stone slab roofing on ground for with fine grained stone slab from approved quarry with 150 mm top lime terracing with Hemp, Methi, Lime, Sandla with Gur & Gugal (as per JODHPUR PRACTICE) including ralthal, filling of joints of parapet and slab on both sides in cement sand mortar 1:4 lime batta (gola) 75mmx75mm Sandla and ceiling plaster in CM 1:4 with wire and nails etc. complete as per specification for span. Above 2.50 mtr upto 3.30 metre.(Excl Cost of Cement ) | 9 | Sqm | |
| 48 | 1.48 | Add extra over item Nos. 4.12 to 4.12.11 for doing centering and shuttering work for each subsequent storey. | 3462 | Sqm | |
| 49 | 1.49 | Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 25 mm thick. Finishing with neat cement (Punning).(Excl Cost of Cement ) | 17 | Sqm | |
| 50 | 1.5 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20x10x2mm and brackets with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm, with 40 mm dia steel pulleys / ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). With 75 mm opening when closed. | 59 | Sqm | |
| 51 | 1.51 | Marble stone flooring table rubbed, 15 mm thick over 20 mm (Av.) thick base of CM 1:4 (1-Cement:4-coarse sand) jointing with white cement mortar 1:2 (1-White cement:2-marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. Makrana Superior quality having light spots. Above 3601 Cm2 (Excl Cost of Cement ) | 65 | sqm | |
| 52 | 1.52 | P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.\nsize 600 mm X 1200 mm (Excl Cost of Cement ) | 279 | Sqm | |
| 53 | 1.53 | Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately). For Fixed portion | 400 | Kgs | |
| 54 | 1.54 | Providing and Fixing 12mm thick prelaminated three layer medium density (exterior grade) particle bonded formaldehyde synthetic resin of approved brand and manufacture in paneling fixed in aluminium doors, windows/ stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Pre-laminated particle board with decorative lamination on both side. | 17 | Sqm | |
| 55 | 1.55 | P&F double action hydraulic floor spring of approved brand and manufacture to aluminium door shutter confirming to IS : 6315 incl. costof cutting floors as reqd. embedding in floor and cover plate etc. complte as per direction of Engineer in charge. | 16 | EACH | |
| 56 | 1.56 | Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:2:4 light concrete, using brick bats complete leveling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. (Excl Cost of Cement ) | 47 | Cum | |
| 57 | 1.57 | Supply & fixing of stainless steel pipe railing for ramp railing height, 90 cm. with 40 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate horizontal pipe with suitable height of same size and gauge with coupling, grinding and polishing & fix of master pieces as per required point as per approved design of Engineer incharge. | 50 | P.Rm | |
| 58 | 1.58 | Supply & fixing steel shutter (Almirah type) with 18 gauge steel border & steel shutter including locking arrangement and painting etc. complete fixed on wall with joint fast (iron clip) | 466 | sqm | |
| 59 | 1.59 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 25 mm. | 221 | Mtr | |
| 60 | 1.6 | Providing and fixing Structural glazing work with toughened glass of 6mm thick and reflective colour as approved in dark shade like Blue/Dark Blue etc. with frame work of curtain section 65x60mm (Weight 1.64 kg/m min.) made of aluminium with chrome plating. Internal frame work will also be of curtain section 65x60mm of chrome plated aluminium section with20x20mm aluminium tube section and structural spacer made of rubber. The aluminium frame work size as per instruction of Engineer-in-charge and including openable panels with all necesary sections and fitting.The work include silicon structural adhesive for complete gripping of glass with framing members and silicon weather seal sealant to prevent moisture/water through joints. Glass will be fixed in plumb and with uniform spacing of 10-12mm wide duly filled with silicon weather seal sealant. The work includes all labour,scaffolding , structural aluminium work, toughened glasses,silicon weather seal sealant, silicon structural adhesive structrucal spacer, all accessoreis like handles, peg stays, M-15 grade cement concrete for fixing holdfast .(Face area of glass shall be measured) | 120 | Sqm | |
| 61 | 1.61 | Supplying and fixing wood work in frames of wall paneling, false ceiling partition wall etc. as per approved design and drawing including antitermite treatment.\nNigeria teak wood Grade – I. | 2 | Cum | |
| 62 | 1.62 | Providing corrugated G.I. Sheet roofing fixed with G.I. J or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 600) & excluding the cost of purlins rafters and truses, for class of sheet : \n1.60 mm thick. | 200 | Sqm | |
| 63 | 1.63 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete above plinth level up to 4.5Mtr. height. | 2000 | Kg | |
| 64 | 1.64 | Extra for providing edge moulding to 15 mm thick marble stone counters, vantities etc. over item No. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.\nGranite work. | 500 | Mtr | |
| 65 | 1.65 | Providing and fixing cow catcher made of R.S. joist angles channels MS rounds including cutting welding and fabrication with priming coat of red oxide (as per design). | 800 | Kg | |
| 66 | 1.66 | Painting with weather coat paint (Asin paint/ I.C.I./Berger or eq. ISI make paint) two or more coat to give an even shade on new work. | 2427 | Sqm | |
| 67 | 1.67 | Providing and Fixing of Extruded Polystyrene Sheet (XPS) of thickness 50 mm Thermal insulation board of Size 2400 X 1200 mm for Cavity Wall Lapping on all 2 Sides having 180 Days aged thermal conductivity of 0.029W/mK measured at 24 Degree Mean Temperature mandate as per ASTM C 578, the compressive strength as per ASTM D1621 should be 250 KPa minimum , Density should be 32-36Kg/m3 as per ASTM D1622, Water absorption % by volume as per ASTM D2842 should be <=1% , Water Vapour permeability as per ASTM E96 should be >=0.0037mg/hmPa, and Oxygen Index % as per ASTM D2863 in the range of 24.1-28.1, Cell size (max) as per ASTM D3576 in mm of dia 0.40 max, Flame Spread as per ASTM E84 Class A/ I , NFPA 101 Class A/ Class I , should be 5 & Smoke Developed as per ASTM E84 should be 45-175 complying with ASTM C 578 as per direction of Engineer-in-Charge.” . The Extruded Polystrene shall be fixed with Water based adhesive with good pull out strength of BASF/Thermi/ 3M or Equivalent make. | 500 | Sqm | |
| 68 | 1.68 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 mtr as per Morth Specification Clause 305.3 | 850 | Cum | |
| 69 | 1.69 | Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per MoRTH Specification table 400-1, 400-2.\nUsing naturally occuring gravel | 294 | Cum | |
| 70 | 1.7 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 602.2.2 M-30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation with vacuum dewatering and floater including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,\nusing curing compound and water finishing to lines and grade as per drawing and MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments (Excl. Cost of Cement) | 392 | Cum | |
| 71 | 1.71 | Providing and fixing steel gate , grating, and grils made of angels , tees, square bars, flats, or black pipe with hold fast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.\nAdd extra if square, rectangular hollow tubuler sections are used. | 11720 | kg | |
| 72 | 1.72 | Interlocking Concrete Block Pavement\nProviding and Laying of Interlocking M-30 grade Concrete Block Pavements as per drawings and IS 15658:2006.with all materials shall conform to MoRTH Specification Clause 602. \nProviding and Laying of Interlocking Concrete Block Pavements having thickness 80 mm.\n | 492 | Sqm | |
| 73 | 1.73 | Providing & Fixing Premium Quality white glazed vitreous china Sanitary Wares (IS:2556 Mark) of approved make as per direction of Engineer-in-charge including cutting and making good the wall and floor.\nW.C. orissa pan with 100 mm vitreous china P or S trap | 2 | each | |
| 74 | 1.74 | Providing & Fixing Premium Quality white glazed vitreous china Sanitary Wares (IS:2556 Mark) of approved make as per direction of Engineer-in-charge including cutting and making good the wall and floor.\nWall Mounting European type W.C. | 25 | each | |
| 75 | 1.75 | P & F Premium quality Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make as per Engineer-in-charge with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : | 27 | each | |
| 76 | 1.76 | Providing & Fixing premium qulaity WVC Urinal with PVC waste pipe, dome couplings, concealed iron brackets or screws etc. complete.\nFlat Back (large) or half stall size 590x375x390 mm. | 18 | each | |
| 77 | 1.77 | P & F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. Makrana II quality marble having light spots. | 18 | each | |
| 78 | 1.78 | P & F C.P. brass Urinal Spreader for stall urinal of approved make. | 18 | each | |
| 79 | 1.79 | P & F C.P. brass Urinal Flush pipe set complete with flanged brackets of approved make. For 3 Urinals. | 6 | each | |
| 80 | 1.8 | P & F Premiumquality water closet Seat Covers with brass hinges complete Solid PVC (ISI marked) grade-I White for EWC. | 25 | EACH | |
| 81 | 1.81 | Providing & Fixing chair for wall hung W.C. | 25 | EACH | |
| 82 | 1.82 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)\n15 mm nominal outer dia pipes | 360 | m | |
| 83 | 1.83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)\n25 mm nominal outer dia pipes | 240 | mtr. | |
| 84 | 1.84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)\n15 mm nominal outer dia pipes\n | 60 | mtr. | |
| 85 | 1.85 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall)\n25 mm nominal outer dia pipes\n | 600 | mtr. | |
| 86 | 1.86 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia | 360 | mtr. | |
| 87 | 1.87 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: 110mm dia | 0.0001 | Sqm. | |
| 88 | 1.88 | Bend 87 .5 | 120 | each | |
| 89 | 1.89 | Coupler | 120 | each | |
| 90 | 1.9 | Vent Cowel | 24 | each | |
| 91 | 1.91 | Door Tee | 120 | each | |
| 92 | 1.92 | Pipe clip | 60 | each | |
| 93 | 1.93 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 75mm dia | 240 | mtr. | |
| 94 | 1.94 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: 75mm dia | 0.0001 | Sqm. | |
| 95 | 1.95 | Bend 87 .5 | 120 | each | |
| 96 | 1.96 | Coupler | 120 | each | |
| 97 | 1.97 | Vent Cowel | 24 | each | |
| 98 | 1.98 | Door Tee | 120 | each | |
| 99 | 1.99 | Pipe clip | 24 | each | |
| 100 | 2 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: 110mm dia\nPlain Floor Trap | 20 | each | |
| 101 | 2.01 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.\n1000 litres capacity. | 12 | each | |
| 102 | 2.02 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge\nSwan neck pillar Cock with long thread 15 mm nominal size | 31 | each | |
| 103 | 2.03 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge\nBib cock 15 mm nominal size | 31 | each | |
| 104 | 2.04 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge\nConcealed stop cock 15 mm nominal size | 24 | each | |
| 105 | 2.05 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge\nSink cock with swinging casted spout (table mounted ) 15 mm nominal size | 4 | each | |
| 106 | 2.06 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :\nGun-metal 15mm nominal bore. | 8 | each | |
| 107 | 2.07 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :\nGun-metal 25mm nominal bore. | 8 | each | |
| 108 | 2.08 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)\n50 mm nominal outer dia pipes | 200 | Mtr | |
| 109 | 2.09 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 450 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.\nDepth up to 0.5 M | 6 | each | |
| 110 | 2.1 | Construction of chamber in all type of soil with 300 mm thick masonry in Cm 1:6 m 100mm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. | 0.0001 | Sqm. | |
| 111 | 2.11 | Inside size 300x300mm depth upto 0.5m & 5Kg C.I. cover with frame | 12 | each | |
| 112 | 2.12 | inside size 450 x 450mm depth upto 0.5 M C.I. cover with frame | 12 | each | |
| 113 | 2.13 | Construction of Cement Concrete Chamber 125mm dia on depressed floor upto 45cm height from floor with :\nC.P. Brass grating | 62 | each | |
| 114 | 2.14 | Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. :\nSize 300 cm. dia outside & 300 Cm. depth | 4 | each | |
| 115 | 2.15 | Providing & fixing C.P.flange for 15mm dia taps. | 31 | each | |
| 116 | 2.16 | P & F Extension Pipe for bib cocks of approved quality/make.\nC.P. brass of Heavy & Superior quality 50x15mm | 31 | each | |
| 117 | 2.17 | P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor : 1.0mm thick salem stainless steel AISI -304 kitchen sink of approved make (Nirali, Neel- Kanth, Jaina, Faber, Cryistal) with large waste coupling. Size 24x18x8 | 4 | each | |
| 118 | 2.18 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. \nSize 600 x 450mm x 4 mm thick | 24 | each | |
| 119 | 2.19 | C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). | 24 | each | |
| 120 | 2.2 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 630 mm x 500 mm dia for counter top. | 2 | each | |
| 121 | 2.21 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 610 mm x 510 mm | 20 | each | |
| 122 | 2.22 | P&F 1st quality WVC pedestal for wash basin | 2 | each | |
| 123 | 2.23 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked). | 72 | each | |
| 124 | 2.24 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- \nSize 400 x140x150 cm.(for 50 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ? @15 cm c/c bothways including shuttering complete in all respect. | 4 | each | |
| 125 | 2.25 | P&F Jet spray for water closet with C.P. copper tube flange of approved make | 27 | each | |
| 126 | 2.26 | P & F C.P. Health Faucet with 1Mtr. Long Tube & Hook of approved make and heavy as per direction of Enginner-in-Charge | 27 | each | |
| 127 | 2.27 | P&F rigid PVC Pipe (IS:4985 mark) class II/(4kg./Cm2) approed quality/make including joining the pipe with solfvent cement rubber ring and lubricant. \n160 mm dia.\n | 226 | Mtr. | |
| 128 | 2.28 | Construction of chamber in all type of soil with 300 mm thick masonry in Cm 1:6 m 100mm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.\nInside size 300x300mm depth upto 0.5m & 5Kg C.I. cover with frame | 20 | Nos | |
| 129 | 2.29 | Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth upto 0.5mtr | 3 | Nos | |
| 130 | 2.3 | Construction of tube-well from ground levels and upto 100 Meter depth and above to accommodate housing and assembly pipe of following sizes in all types of alluvium strata by percussion / rotary drilling method and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I & II) 1979 as amended upto date (the work includes the cost of gravel & its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coir rope, wherever necessary, for arresting fine sand particles. The work will not include cost of housing pipe and strainer pipe assembly and development work, but work would be completed after obtaining sand free water). 200 mm Nominal bore. | 270 | Mtr | |
| 131 | 2.31 | Supply of ERW M.S. black casting pipe ISI marked (IS:4270/1992) of grade Fe 410 of following sizes at site of work. 200 mm nominal bore | 32 | Mtr | |
| 132 | 2.32 | Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985. 200 mm Nominal Bore. | 120 | Mtr | |
| 133 | 2.33 | S & F tube well cover of tube well cover of M.S. sheet (6mm thick) with nuts and bolts complete for casing size : 250mm dia. | 4 | No | |
| 134 | 2.34 | Development of tube well as per IS specification using suitable compressor to give sand free water for required yield of the gravel packed tube well. | 4 | Hr | |
| 135 | 2.35 | Providing & lowering of G.I. Pipes, flange pipe including rubber washer and nuts of 8 mm dia complete in all respect I.S.1239 Marked.\nB Class 50 mm dia | 180 | Mtr | |
| 136 | 2.36 | Construction of Recharge Shaft in filter pit including Earth work Excavation , lifting excavted earth with all lift and 50 m lead and centering & shuttering evenever required.\nDiameter 900 mm | 20 | Mtr | |
| 137 | 2.37 | Supply & fixing Pre-cast RCC Rinngs at the mouth of recharge shaft of M20 mix with 40 mm thickness\nDiameter 900 mm | 2 | Mtr | |
| 138 | 2.38 | Supply and lowering vent air pipe 63mm dia rigid PVC pipe(IS 4985) mark class II (4kg per cm2 ) with required all necessary fittings including perforation of 3 to 5 mm size all around the pipe at a distance of 180 to 220mm in zig zag fashion and making air vent at top complete as per direction of Engineer incharge. | 30 | Mtr | |
| 139 | 2.39 | Supply & lying River-gravels of following sizes in recharge shaft, filter pit after screening & washing from kachha shift without deduction of voids \nSize 9 to 12 mm | 4 | cum | |
| 140 | 2.4 | Supply & lying River-gravels of following sizes in recharge shaft, filter pit after screening & washing from kachha shift without deduction of voids \nSize 3 to 15 mm | 4 | cum | |
| 141 | 2.41 | Supply & laying of clean, clear sharp river sand of size 1 to 2mm coarse, without deduction of voids. | 4 | cum |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail