Retrofitting/Replacement/Renovation Of Soft Starters With Allied Works Of Pump Set No . 2 N 3 At Mublock Pitampura Bps, OFFICE OF THE EXECUTIVE ENGINEER (EnM) WS /NW-Delhi

Retrofitting / Replacement / Renovation Of Soft Starters With Allied Works Of Pump Set No . 2 N 3 At Mublock Pitampura Bps , Replacement & Calibration Of Soft Starter Of Schneider Make Of Pump Set No . 2 & 3 At Mu Block Pitampura Bpscarrying Out Following Works: -Dismantling Of Soft Starter From The Soft Starter Panel By Disconnecting All Electric Connections From Panel & Motor Side , Cutting Of Nut Bolt , And Removing The Same . , Replacement Of Defective Soft Starter Of 220 Kw With Complete Tripping , Elements Module Suitable For Motor Rated 210 Kw , 415 Volt Lfc 386 Amp . Make: Schneider Model No . Ats22 , Installation Of The New Starter Complete In The Chamber Along With Providing All Material Required For The Fixing Of Starter Including Providing And Fixing Of Base Frame , Other Required Mounting Accessories / Material And Carrying Out Required Modification Work As Per Site Requirement . , Making The Required Incoming Connections From The Incomer Mccb To The Starter Including Providing And Fixing Of Bus Bars In Required Cross Section For Replacing Links With Nut Bolts Making Joints Etc . As Per Site Requirement . , Making The Required Outgoing Connections From The Starter To The Motor / Pumps Including Making Connection Provisions Through Providing And Fixing Of Bus Bars Of Required Cross Section For Connecting The Existing Cables And Providing Required Supports Etc . For Making Joints And Carrying Out Modification Work As Per Site Requirement . , Making Of Required Control Wiring Connections Along With Protection Arrangement Of Starter Operating System Complete As Per Site Requirement . , Renovation Of Meter Metering System Of The Starter By Replacing Any Defected Metering / Indicating Instruments Along With Replacing Cts As Required Including Making Complete Wiring Connections Through Copper Flexible Wires As Per Site Requirement . , Installation , Testing &Commissioning Of Soft Starter And Other Panel Job Work . , Making The Configuration For The Starters For Setting Up Of Tripping Range And Other Calibrations Etc . As Per The Load And As Per Site Requirement

INR 500 /-

INR 17500.0 /-

INR 8.68 Lakhs /-