| 1 | 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting for all leads and lifts excetra complete.\nItem / Page No : 2 / 187\nSpecification No : Bd.A.1\nSpec. Page No : 259\n | BI01010001010000000000000515BI0100001112 | 19.44 | Cubic Metre |
|---|
| 2 | 2 | Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with grit, ramming, watering, excetra complete.\nItem / Page No : 40A / 192\nAdditional Specifications : The work shall be carried out as per instructions of Engineer in-charge. | BI01010001010000000000000515BI0100001113 | 3.24 | Cubic Metre |
|---|
| 3 | 3 | Providing and laying Cast in situ/Ready Mix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork,laying/pumping, compacting and curing excetra complete, with fully automatic micro processor based Programmable Logic Control with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer. - With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 1 / 217\nSpecification No : Bd.E.1\nSpec. Page No : 287-288\nAdditional Specifications : With additional specifications for controlled concrete. | BI01010001010000000000000515BI0100001114 | 1.62 | Cubic Metre |
|---|
| 4 | 4 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 11 / 222\nSpecification No : Bd.F.3, B-7\nSpec. Page No : 298, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | BI01010001010000000000000515BI0100001115 | 3.54 | Cubic Metre |
|---|
| 5 | 5 | Providing and laying cast in situ / Ready Mix cement conrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed, including steel centering, formwork, cover blocks,aying/pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.with fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For Ground Floor)\nItem / Page No : 31 / 224\nSpecification No : Bd.F.5, B-7\nSpec. Page No : 300, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | BI01010001010000000000000515BI0100001116 | 2.69 | Cubic Metre |
|---|
| 6 | 6 | Providing and laying cast in situ / Ready Mix cement conrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed, including steel centering, formwork, cover blocks,aying/pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.with fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For First Floor)\nItem / Page No : 31 / 224\nSpecification No : As per Item No 5\nSpec. Page No : ---\nAdditional Specifications : As per Item No 5 | BI01010001010000000000000515BI0100001117 | 6 | Cubic Metre |
|---|
| 7 | 7 | Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For Ground Floor)\nItem / Page No : 50 / 225\nSpecification No : Bd.F.6, B-7\nSpec. Page No : 300-301, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | BI01010001010000000000000515BI0100001118 | 4.69 | Cubic Metre |
|---|
| 8 | 8 | Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For First Floor)\nItem / Page No : 50 / 225\nSpecification No : As per Item No 7\nSpec. Page No : ---\nAdditional Specifications : As per Item No 7 | BI01010001010000000000000515BI0100001119 | 4.18 | Cubic Metre |
|---|
| 9 | 9 | Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 superstructure including striking joints, racking out joints, watering and scaffolding, excetra complete. (For First Floor)\nItem / Page No : 5 / 246\nSpecification No : Bd.G.5\nSpec. Page No : 315\n | BI01010001010000000000000515BI0100001120 | 19.09 | Cubic Metre |
|---|
| 10 | 10 | Providing and laying 125 micron low density polyethylene sheet confirming to Indian Standard : 3395 - 1997 below concrete pavement including all materials and labour complete.\nItem / Page No : 19 / 55\nSpecification No : MoRTH 605\nSpec. Page No : ---\n | BI01010001010000000000000515BI0100001121 | 23.04 | Square Metre |
|---|
| 11 | 11 | Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks,laying / pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For Ground Floor)\nItem / Page No : 70 / 227\nSpecification No : Bd.F.8, B-7\nSpec. Page No : 302-303, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | BI01010001010000000000000515BI0100001122 | 3.94 | Cubic Metre |
|---|
| 12 | 12 | Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap metal for reinforced cement concrete chajja as per detailed design and drawings including centering, formwork, cover blocks, compacting, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With natural sand/V.S.I. quality Artificial Sand (For First Floor)\nItem / Page No : 5 / 230\nSpecification No : BDF-9, B-7\nSpec. Page No : 303-304, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | BI01010001010000000000000515BI0100001123 | 0.43 | Cubic Metre |
|---|
| 13 | 13 | Providing and fixing in position thermo mechnically treated FE-500 bar reinforcements of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete. (For Ground Floor)\nItem / Page No : 33 / 236\nSpecification No : Bd.F.17\nSpec. Page No : 306\n | BI01010001010000000000000515BI0100001124 | 1.645 | Metric Ton |
|---|
| 14 | 14 | Providing and fixing in position thermo mechnically treated FE-500 bar reinforcements of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete. (For First Floor)\nItem / Page No : 33 / 236\nSpecification No : As per Item No 13\nSpec. Page No : ---\nAdditional Specifications : As per Item No 13 | BI01010001010000000000000515BI0100001125 | 1.219 | Metric Ton |
|---|
| 15 | 15 | Providing and fixing frame with / without ventilator of size as specified with Ghana teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 milimetre X 40 milimetre X 5 milimetre with oil painting, excetra complete. (For First Floor)\nItem / Page No : 1 / 306\nAdditional Specifications : The work shall be done as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001126 | 0.048 | Cubic Metre |
|---|
| 16 | 16 | Providing and fixing country cut teak wood single leaf pannelled door shutter without fanlight and 25 milimetre thick as per drawing consisting of ghana teak wood top rail size 100 milimetre X 25 milimetre and bottom rail and lock rail 200 milimetre X 25 milimetre insert pannel 12 milimetre thick commercial plyfaced teak wood partical board with phenol formaldehyde synthetic resin (Generally confrming to Indian Standards Institution Specification 3097) excluding frame inclduding stainless steel fixture and fastening and teak wood beading to junctions of pannelled inserts and as instructred by the Engineer in charge including three coats of oil painting, excetra complete. (For First Floor)\nItem / Page No : 5 / 306\nAdditional Specifications : The work shall be done as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001127 | 4.49 | Square Metre |
|---|
| 17 | 17 | Providing sills of marble other than white makrana 20 milimetre to 25 milimetre thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete.Marble other than white makraDeleted (For First Floor)\nItem / Page No : 21 / 268\nSpecification No : Bd.M-31\nSpec. Page No : 392\n | BI01010001010000000000000515BI0100001128 | 8.69 | Square Metre |
|---|
| 18 | 18 | Providing and fixing in position (as per Indian Standard 1868/1982) aluminium sliding window of two tracks with rectangular pipe having overall dimentsions 63.50 milimetre X 38.10 milimetre X 1.02 milimetre at weight 0.547 kilogram per running metre and window frame bottom track section 61.85 milimetre X 31.75 milimetre X 1.20 milimetre at weight 0.695 kilogram per running metre. Top and side track section 61.85 milimetre X 31.75 milimetre X 1.30 milimetre at weight 0.659 kilogram per running metre. The shutter should be of bearing bottom 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre. Interlocking secion 40 milimetre X 18 milimetre X 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by Engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass with all required screws and nuts excetra complete. - With powder coating without box. (For First Floor)\nItem / Page No : 40 / 315\nAdditional Specifications : The work shall be done as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001129 | 12.6 | Square Metre |
|---|
| 19 | 19 | Providing and fixing mild steel grill work for windows, ventilator, excetra 20 kilogram per square metre as per drawings including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting, excetra complete. (For First Floor)\nItem / Page No : 1 / 329\nSpecification No : Bd.U.1\nSpec. Page No : 537\n | BI01010001010000000000000515BI0100001130 | 12.6 | Square Metre |
|---|
| 20 | 20 | Providing internal cement plaster 20 milimetre thick in two coats in cement mortar 1:4 without neeru finish to concrete, brick surface, in all positions including scaffolding and curing, excetra complete. (For First Floor)\nItem / Page No : 7 / 260\nSpecification No : Bd.L.4\nSpec. Page No : 368\n | BI01010001010000000000000515BI0100001131 | 178.82 | Square Metre |
|---|
| 21 | 21 | Providing and applying washable oil bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces (excluding the primer coat), excetra complete. (For First Floor)\nItem / Page No : 11 / 285\nSpecification No : Bd.P.5\nSpec. Page No : 413\n | BI01010001010000000000000515BI0100001132 | 178.82 | Square Metre |
|---|
| 22 | 22 | Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 milimetre to 15 milimetre thick in cement mortar 1:4 and routh cast treatment 12 milimetre thick in proportion 1:1.1/2:3 including scaffolding and fourteen days curing complete. (For First Floor)\nItem / Page No : 12 / 261\nSpecification No : Bd.L.8\nSpec. Page No : 370\n | BI01010001010000000000000515BI0100001133 | 180.57 | Square Metre |
|---|
| 23 | 23 | Providing and applying two coats of waterproof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surfaces, watering for two days, excetra complete. (For First Floor)\nItem / Page No : 13 / 281\nSpecification No : Bd.O.8\nSpec. Page No : 406\n | BI01010001010000000000000515BI0100001134 | 180.57 | Square Metre |
|---|
| 24 | 24 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates excetra as per detailed desings and drawings or as directed including cuting, fabricating, hoisting, erecting, fixing in position, making rivetted / bolted / welded connection and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade, excetra complete. (For First Floor)\nItem / Page No : 4 / 214\nSpecification No : Bd.C.8\nSpec. Page No : 278\n | BI01010001010000000000000515BI0100001135 | 2.524 | Metric Ton |
|---|
| 25 | 25 | Providing and fixing corrugated galvlanised iron sheets of 0.63 milimetre thick (24 B.W.G) for roofing without wind tiles including fastening with galvanised iron screw and bolts and lead / bitumen washers as per drawing, excetra complete. (Weight 5.5 killogram per square meter) (For First Floor)\nItem / Page No : 4 / 291\nSpecification No : Bd.R.5\nSpec. Page No : 452-453\n | BI01010001010000000000000515BI0100001136 | 146.29 | Square Metre |
|---|
| 26 | 26 | Providing and fixing 40 milimetre dia and 1.5 milimetre thick stainless steel hand railing in stainless steel 304 grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe, excetra complete. (For Ground Floor)\nItem / Page No : 6 / 329\nAdditional Specifications : The work shall be done as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001137 | 6.7 | Running Metre |
|---|
| 27 | 27 | Providing and laying chequered tiles of approved quality of size 30 centimetre X 30 centimetre for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning, curing, excetra complete. (For Ground Floor)\nItem / Page No : 66 / 275\nSpecification No : Bd.M.12\nSpec. Page No : 385\n | BI01010001010000000000000515BI0100001138 | 12.15 | Square Metre |
|---|
| 28 | 28 | Providing and laying vitrified mirror / glossy finish decorative type tiles of size 590 milimetre to 605 milimetre X 590 milimetre to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. - Skirting (For First Floor)\nItem / Page No : 41 / 271\nSpecification No : Bd.M.12\nSpec. Page No : 385\n | BI01010001010000000000000515BI0100001139 | 57.41 | Square Metre |
|---|
| 29 | 29 | Contribution towards District Mineral Foundation at the rate of 10 percent of prevailing rate of Royalty for various building construction bonafied materials which are used for government bonafied works and for which Royalty is to be paid by the contractor.\nItem / Page No : 10 / 0\nAdditional Specifications : Government of Maharashtra, Industries, Energy and Labour Department Government Resolution Number MDF/0615/CR-34/IND-9 Dated 1-9-2016 and Section 2 thereof. | BI01010001010000000000000515BI0100001140 | 26.96 | Cubic Metre |
|---|
| 30 | 30 | Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor.\nItem / Page No : 3 / 0\nAdditional Specifications : Government of Maharashtra, Revenue and Forest Department Gazette Number 67 Dated 15-5-2015 and Government of Maharashtra Public Works Department State Schedule of Rates 2017-18 General Note Number 4.3. | BI01010001010000000000000515BI0100001141 | 26.96 | Cubic Metre |
|---|
| 31 | 31.01 | Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.\nItem / Page No : 4 / 0\nAdditional Specifications : 1. The amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the Vigillence and Quality Control Office with the name of work mensioned on it.Compressive Strength of Cement Concrete Cube\n1 Test for quantity upto 5 cubic metre, 2 Tests for quantity above 5 cubic metre and upto 15 cubic metre, 3 Tests for quantity above 15 cubic metre and upto 30 cubic metre, 4 Tests for quantity above 30 cubic metre and upto 50 cubic metre. For quantity 50 cubic metre and above - 4 Tests + 1 Test for each additional 50 cubic metre | BI01010001010000000000000515BI0100001142 | 3 | Number |
|---|
| 32 | 31.02 | Water Absorption, Compressive Strength, Efflorescence Test for Burnt Bricks\n1 Test per 50000.00 Number | BI01010001010000000000000515BI0100001143 | 1 | Number |
|---|
| 33 | 31.03 | Compressive Strength of Cement Mortar\n1 Test per Day | BI01010001010000000000000515BI0100001144 | 1 | Number |
|---|
| 34 | 32 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge\nItem / Page No : 36 / 76\nSpecification No : MoRTH-801\nSpec. Page No : ---\nAdditional Specifications : The work shall be carried out as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001145 | 1 | Number |
|---|
