Construction Of Auditorium Building In Narendra Nagar Of Distrect Tehri Garhwal Under Deposit Head, At Narendranagar-Uttarakhand

TDR : 23003955

Tender Notice
BOQ

Expired

At Narendranagar , Uttarakhand

Tender Brief : Construction Of Auditorium Building In Narendra Nagar Of Distrect Tehri Garhwal Under Deposit Head

Document Fees
₹ 5900 /-

EMD
₹ 882000.0 /-

Tender Value
₹ 4.40 Crore /-

Submission Date
06-01-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: CONSTRUCTION OF AUDITORIUM BUILDING IN NARENDRA NAGAR OF DISTRECT TEHRI GARHWAL UNDER DEPOSIT HEAD
1	1	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.	878	Cum
2	2	Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials.All kinds of soil\n	151	Cum
3	3	Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.\n\n\n	654	Cum
4	4	Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.	381	Cum
5	5	Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration\n\n\n\n\n	379	Sqm
6	6	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)\n\n	162	Cum
7	7	Providing and laying damp-proof course 50mm thick with cement concrete1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).\n\n	13	Sqm
8	8	Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.\n\n\n	13	Sqm
9	9	Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed by dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth	63	Sqm
10	10	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).\n\n\n\n\n	293	Cum
11	11	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).\n\n\n\n\n	723	Cum
12	12	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars	152838	Kg
13	13	Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete	294	Sqm
14	14	Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts	1012	Sqm
15	15	Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers	1037	Sqm
16	16	Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick	1877	Sqm
17	17	Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.	1014	Sqm
18	18	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)	26	Cum
19	19	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)	191	Cum
20	20	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).	1154	Kg
21	21	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick \n	362	Sqm
22	22	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.	15	sqm
23	23	Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.	147	Sqm
24	24	12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)	4263	Sqm
25	25	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.	4263	Sqm
26	26	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat with cement primer	4263	Sqm
27	27	Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage. For vertical surface two coats @0.70 kg per sqm per coat	160	Sqm
28	28	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)	816	Sqm
29	29	Extra for providing and placing in position 2 nos 6.00 mm dia M.S Bar every third Course of half brick masonary	816	Sqm
30	30	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws	65	Sqm
31	31	Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).	82	Sqm
32	32	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm\n	80	Nos
33	33	Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :: 300x16 mm	18	Nos
34	34	Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete ::250x16 mm	26	Nos
35	35	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm	33	Nos
36	36	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm	35	Nos
37	37	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper	40	Nos
38	38	Providing and fixing fly proof galvanised M.S wire gauze to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm. With 12 mm mild steel U beading.	134	Sqm
39	39	Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile 'B' (Single Pattam)	178	Sqm
40	40	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)	2677	Kg
41	41	Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :5.5 mm thick glass panes	134	Sqm
42	42	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding	2409	Kg
43	43	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.r 80x1.25 mm M.S. laths with 1.25 mm thick top cover	94	Sqm
44	44	Providing and fixing ball bearing for rolling shutters	16	Each
45	45	Providing and laying Vitrified tiles in sizes Tile 600x600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.	426	Sqm
46	46	Providing and laying Vitrified tiles in sizes 600x600 (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).	84	Sqm
47	47	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete	69	Sqm
48	48	Providing and fixing Ist quality ceramic glazed wall tiles 600x600 conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.	276	Sqm
49	49	15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)	807	Sqm
50	50	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)	851	Sqm
51	51	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture	1155	Sqm
52	52	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.	160	Sqm
53	53	Providing and laying cement concrete - all works upto plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size).\n	39	Cum
54	54	Providing and fixing ISI marked flush door shutters 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws	17	Sqm
55	55	Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary\nservices all fitting fixers nut bolts, washer, Buffer plates, fastener,anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.\n\n\n\n\n\n\n\n\n\n\n\n\n\n	60	Sqm
56	56	38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete.	98	Sqm
57	57	6 mm cement plaster of mix :13.16.1 1:3 (1 cement : 3 fine sand)	33	Sqm
58	58	Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expandedzinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles	523	Sqm
59	59	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade. Area of slab over 0.50 sqm	5	Sqm
60	60	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm	16	Each
61	61	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm Bend 87.5 degree	4	Each
62	62	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm Shoe (Plain)	12	Each
63	63	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm\nhard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm\n\n\n	16	Each
64	64	Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster	11	Sqm
65	65	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including utting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes	19057	Kg
66	66	Supply & installation of precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT) thick Zinc coating 120gsmas per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	425	Sqm
67	67	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)\n\n\n\n	25	Rmt
68	68	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Gutter .(600 mm over all girth)\n\n\n\n	50	Rmt
69	69	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter\n\n\n	116	Rmt
70	70	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm\nhard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm\n\n\n	40	Nos
71	71	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.\n	8	Nos
72	72	Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)	64	Cum
73	73	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)	40	Cum
74	74	12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)	107	Sqm
75	75	Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :100 mm diameter\n\n	30	Rmt
76	76	Constructing masonry chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1cement :4 coarse sand ) with C.c 1:2:4 floor over C.C 1:5:10 Finished with a floating coat of neat cement complete .Rectangular shape 600x450mm internal dimensions	2	Each
77	77	Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg	10	Each
78	78	Supplying and stacking at site. Over burnt (Jhama) brick aggregate 90 mm to 45 mm	14	Cum
79	79	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil\n\n\n	228	Cum
80	80	52 mm thick cement concrete flooring with concrete hardener topping,under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.\n\n\n\n\n\n\n	40	Sqm
81	81	12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand)\n	158	Sqm
82	82	Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved qualityRectangular shape 600x450 mm internal dimensions\n	4	Each
83	83	Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar\n\n\n	24	Each
84	84	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 15 mm dia nominal bore	180	Rmt
85	85	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 20 mm dia nominal bore	35	Rmt
86	86	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 25 mm dia nominal bore	35	Rmt
87	87	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bor	100	Rmt
88	88	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore\n\n	36	Each
89	89	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :20 mm nominal bore\n\n	26	Each
90	90	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :25 mm nominal bore\n\n	7	Each
91	91	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore	36	Each
92	92	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.	4	Each
93	93	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore	18	Each
94	94	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore	8	Each
95	95	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore	4	Each
96	96	Providing and fixing gun metal non- return valve of approved quality (screwed end) :50 mm nominal bore horizontal	1	Each
97	97	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.\n\n	8000	Ltr
98	98	Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid\n\n\n\n\n\n	19	Each
99	99	Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,\nwith fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern\n\n\n\n\n\n	4	Each
100	100	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps\n\n\n	21	Each
101	101	Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 250 mm\n\n\n	1	Each
102	102	Providing and fixing soil, waste and vent pipes :Sand cast iron S&S pipe as per IS: 1729	135	Mtr
103	103	Providing and fixing soil, waste and vent pipes :75 mm diaSand cast iron S&S pipe as per IS: 1729	90	Mtr
104	104	Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.\n	21	Each
105	105	Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :For 75 mm dia pipe\n\n\n\n	32	Each
106	106	Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm dia Sand cast iron S&S as per IS - 1729\n	48	Each
107	107	Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.75mm dia pipe Sand cast iron S&S as per IS - 1729\n	53	Each
108	108	Providing and fixing plain bend of required degree.100 mm dia Sand cast iron S&S as per IS - 1729	46	Each
109	109	Providing and fixing plain bend of required degree.75 mm dia Sand cast iron S&S as per IS - 1729	53	Each
110	110	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outletSand cast iron S&S as per IS: 3989 \n\n	32	Each
111	111	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm\n\n	21	Each
112	112	Providing and fixing terminal guard :100 mm Sand cast iron S&S as per IS - 1729	16	Each
113	113	Providing and fixing collar :100 mm Sand cast iron S&S as per IS - 1729	5	Each
114	114	Providing and fixing collar :75 mmSand cast iron S&S as per IS - 1729	15	Each
115	115	Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soilPipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia\n\n\n\n\n\n\n	150	Cum
116	116	Providing, laying and jointing glazed stoneware pipes class SP-1with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :100 mm diameter\n\n	150	Rmt
117	117	Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :150 mm diameter S.W. pipe\n\n\n	150	Rmt
118	118	Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:With common burnt clay F.P.S. (non modular) bricks of class designation 7.5\n\n\n\n	10	Each
119	119	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5\n\n\n\n\n\n\n\n\n\n\n\n\n	10	Each
120	120	Extra for depth for manholes :Size 90x80 cmWith common burnt clay F.P.S. (non modular)bricks of class designation 7.5\n	3	Rmt
121	121	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\"1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).\n\n	4	Cum
122	122	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate\n\n	21	Sqm
123	123	12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand)\n	158	Sqm
124	124	Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5\n\n\n	2	Nos
125	125	Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.\n\n\n\n\n	186	Sqm
126	126	ELECTRIFICATION WORK Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C\n\n\n\n\n	471	Each
127	127	Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/\nrecessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.\n\n\n	1580	Rmt
128	128	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire\n\n\n	840	Rmt
129	129	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire	1580	Rmt
130	130	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire	200	Rmt
131	131	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 10 sq. mm + 1 X 6 sq. mm earth wire	770	Rmt
132	132	Supplying and drawing following pair 0.5 mm dia FRLS PVCinsulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit asrequired.2 Pair\n\n\n	45	Rmt
133	133	Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.\n\n\n	570	Rmt
134	134	Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. \n\n\n\n\n	18	Nos
135	135	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm\n\n\n	615	Rmt
136	136	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm\n\n\n	200	Rmt
137	137	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.\n\n\n	79	Nos
138	138	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.\n\n	84	Nos
139	139	Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required.\n	2	Nos
140	140	Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)8 way (4 + 24), Double door\n\n\n\n\n\n	20	Each
141	141	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.\n\n\n	480	Each
142	142	Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A\n\n	20	Each
143	143	Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63A\n\n	20	Each
144	144	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.\n\n\n	6	Set
145	145	Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/termination with GI thimble etc. as required.\n\n	210	Rmt
146	146	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.\n\n	69	Nos
147	147	Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.\n	90	Nos
148	148	Supplying and fixing brass batten/ angle holder including connections etc. as required.\n	93	Nos
149	149	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch\n\n	40	Nos
150	150	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. 3 pin 5/6 A socket outlet	40	Nos
151	151	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. Telephone socket outlet	2	Nos
152	152	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. TV antenna socket outlet	19	Nos
153	153	Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.75 mm X 75 mm X 60 mm deep\n\n	21	Nos
154	154	Providing and fixing plain 16/0.20 mm (0.50 sq.mm) twin circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required\n\n	45	Rmt
155	155	Supply of 7W LED Bulb for mounting on brass Holder (Havells Catc.ref .LHLDEUHEMC8R007 or Equivalrnt	93	Nos
156	156	Supply of New E Lite 20 W LED Triyca Batten A Colour Changing LED Batten With option of 3000 K, 4000K, & 6500K, all in one fixture (Havells Catc Ref LHEXBYPNIN1W020 or equivalent	51	Nos
157	157	Supply of Matallic Range Exchaust Fan ,300 mm Sweep ( Havells Catc ref Ventil Air DSp ofr Equivalent	24	Nos
158	158	Supply of 1200 mm,sweep , 5 Star rated Ceiling Fan ( Havells catc ref ES NEO or Equivalent	69	Nos
159	159	Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.\n\n\n\n\n	69	Nos
160	160	Supply of Linear & Compact 9 W ,4000 K mirrir ght with decorative grey end caps polycarbonate body and ribbed opal diffuses (Havells catc ref LHEXARP^PN1WB168 or equivalent	15	Nos
161	161	Supplying of Recess/Conceal downlighter with pressure die-cast aluminium heat sink & PC Diffuser in white powder coated finish with integrated driver (9 W LED, 4\" dia, 6500 K). (Firefly Catc. ref. EDL222209DL or equivalent)	159	Nos
162	162	Suppplying of Ceilling light 1' X 1' recessed slim daylight. (24 W, 6000 K). (Firefly catc. ref. EDL1224DL or equivalent)	16	Nos
163	163	Suppplying of Ceilling light 2' X 2' LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination. (40 W, 6500 K). (Firefly catc. ref. ELU3040DL/1 or equivalent)	42	Nos
164	164	Design, Fabrication, Supply, Erection, Testing and commisioning of Powder coated Main Distribution Panel fabricated out of 14 guage CRCA sheet steel in cubical, compartmentallised, FRLSee standing floor/wall mounted, dust and vermin proof, with reinforcement of suitable size angle iron, channel, T-iron or flats as required. Cable gland plates shall be provided on top as well as bottom of the panels. Panels shall be treated with all anti-corrosive process. before painting as per specification. Panels shall be suitable for 415V, 3-Phase, Four wire, 50Hz supply complete with earth bus and lifting hooks as required in case of large panels. Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated	1	Job
165	165	Providing Gyser (water Heater) 15 Liter Capacity. Make: (havells) -Monza EC -GHWAMFSIV015	3	Nos
166	166	S/F Single Pole blanking plate in the exixting MCB Complete etc as requires (4 No/ MCBDB)	80	Nos
167	167	EXTERNAL ELECTRIFICATION Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.\n\n\n	4	Set
168	168	Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.\n\n	48	Rmt
169	169	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)\n\n\n\n	40	Rmt
170	170	S/F Aluminum Conductor PVC insulated Armoured Served Sheathed Cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand around and protected with brunt brick on side and top on surface the cable run shall be fixed on MS clamps etc of Suitable size or as directed by the Engineer Incharge complete in all Respects the Amrmouring of the Cable shall be properly connected with the earth conductor by clamps etc 10 Sqmm 2 Core Cat A (Fore Street Light)	110	Rmt
171	171	S/F Aluminum Conductor PVC insulated Armoured Served Sheathed Cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand around and protected with brunt brick on side and top on surface the cable run shall be fixed on MS clamps etc of Suitable size or as directed by the Engineer Incharge complete in all Respects the Amrmouring of the Cable shall be properly connected with the earth conductor by clamps etc 95 Sqmm 3.5 core cat A ( for Bldgs)	150	Rmt
172	172	S/F Aluminum Conductor PVC insulated Armoured Served Sheathed Cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand around and protected with brunt brick on side and top on surface the cable run shall be fixed on MS clamps etc of Suitable size or as directed by the Engineer Incharge complete in all Respects the Amrmouring of the Cable shall be properly connected with the earth conductor by clamps etc 150 Sqmm 3.5 Core cat A ( for trif to fidder pillar)	115	Rmt
173	173	Supplying and fixing of 32 mm dia X 2.00 meter long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 Nos. 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.\n\n\n\n\n	5	Nos
174	174	Supply Installation Testing & Commissioning of LED Streetlight made up of pressure die cast housing with toughned glass and individual high Power LED with secondary optic IP66 Protection impact resistance of IK07 & 10 K.v external SPD ( LED Lamp 48 W 5700K)	5	Nos
175	175	Supplying and Fixing Gate Lite intergal pole Mounted decorative typ[e LED post top with Spherical Shaded Polycarbonate diffuser and IP65 Protection Bajaj Gate Light Globe BLPTSP 25W NW LED 25 W LED Neutral White	2	Nos
176	176	Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.Above 6.5 meter and upto 8.0 meter\n\n\n	5	Nos
177	177	Supply of Steel Tubular Swaged Poles Complete with Cast iron base plate Final taper Plug Bolts nuts & Scrwers as Specified type 410 SP-10 With two Coat of aluminum paint over one coat of primer all as directed by Enginerr in Charge	5	Nos
178	178	Providing and Laying of Pipes with G.I Fitting inculding trenching and refilling 40 mm dia Nominal bore	100	Rmt
179	179	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.65 mm dia nominal bore\n	150	Rmt
180	180	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.80 mm dia nominal bore\n	115	Rmt
181	181	FIRE SYSTEM Providing,fixing,testing and commissioning,Single Headed Stainless Steel,ISI marked oblique pattern hydrant/ landing valve with 80 NB flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain,twist release type lug and all accessories as per IS 5290-1983 (Type-‘A’).New Age /Omex/ ISI / Getech / Safe Fire	2	Nos
182	182	Providing, Fixing, Testing and Commissioning of First Aid Fire Hose Reel wall mounting swinging type complete with drum, bracket, 30 Mtr. Long high pressure hose reel tubing as per IS:44 with gun- metal shut off nozzle with 5 m orifice.The hose reel shall strictly confirm to IS:884-1985.Make :– New Age /Omex/ ISI / Getech / Safe Fire	2	Nos
183	183	Providing Non-percolating Flexible Hose (RRL Type-A) ISI marked (ISI : 636)63 mm dia x7.5/15 Mtr.Long complete with instantaneous type gun-metal 63 mm dia. ISI marked male & female couplings (IS : 903) bound & riveted to nose hose pipe with copper rivets and copper wire. Make :– Make :– Jai Shree / Omex/ Fire Chief / BRG / ISI	6	Nos
184	184	Providing and Fixing of Hose Cabinets fabricated from 16/18 Gauge CRCA sheet with full front glass door and locking arrangements, suitable to accommodate 2 Nos.15 M long hose pipe and 1 Nos. Branch Pipe. The cabinet shall be painted with one coat of Primer and two more coats of synthetic enamel paint of provided shade.	4	Nos
185	185	Providing and fixing of Stainless Steel 63 mm dia.Short Branch Pipe with 16 mm dia,nozzle (IS:903).Make :– New Age /Omex/ ISI / Getech / Safe Fire	2	Nos
186	186	Providing, Fixing, testing & commissioning of Air Cushion Tank (Air Vessel) 200 mm dia & 1000 mm high with dished top, made of minimum 6 mm thick MS pipe/plate complete with 20 mm dia, brass air valve (ball type), 20 mm stop valve pressure gauge and all accessories as required including fixing brackets.	1	Nos
187	187	Providing, Fixing, testing & commissioning of Air Cushion Tank (Air Vessel) 450 mm dia & 1500 mm high with dished top, made of minimum 6 mm thick MS pipe/plate complete with 20 mm dia, brass air valve (ball type), 20 mm stop valve pressure gauge and all accessories as required including fixing brackets.	1	Nos
188	188	Providing, laying, testing and commissioning of \"C\" class MS Pipe conformingto IS: 1239 / IS:3589 including MS fittings like elbows, tees, flanges, tapers,nuts,bolts,gaskets etc with a coat of primer and paintMake :– Jindal / Surya/ Prakash / Tata 100 mm dia	50	Rmt
189	189	Providing, laying, testing and commissioning of \"C\" class MS Pipe conformingto IS: 1239 / IS:3589 including MS fittings like elbows, tees, flanges, tapers,nuts,bolts,gaskets etc with a coat of primer and paintMake :– Jindal / Surya/ Prakash / Tata 80 mm dia	15	Rmt
190	190	Providing, laying, testing and commissioning of \"C\" class MS Pipe conformingto IS: 1239 / IS:3589 including MS fittings like elbows, tees, flanges, tapers,nuts,bolts,gaskets etc with a coat of primer and paintMake :– Jindal / Surya/ Prakash / Tata 25 mm dia	20	Rmt
191	191	Providing, Fixing, testing & commissioning of cast iron flinged ISI marked -Non-Return Valves complete with rubber insertions, nuts, bolts and washers etc. IS:5312 of following sizes:Make :– Zoloto / Kirloskar / Sant / Kartar / ISI 100 mm dia	2	Nos
192	192	Providing, Fixing, testing & commissioning of cast iron flinged ISI marked -Non-Return Valves complete with rubber insertions, nuts, bolts and washers etc. IS:5312 of following sizes:Make :– Zoloto / Kirloskar / Sant / Kartar / ISI 80 mm dia	2	Nos
193	193	Providing, fixing, testing & commissioning of cast iron flanged IS marked Butterfly Valve class PN-1.6 complete with rubber etc.IS:780 of following sizes:Make :– Zoloto / Kirloskar / Kartar / ISI 100 mm dia	2	Nos
194	194	Providing, fixing, testing & commissioning of cast iron flanged IS marked Butterfly Valve class PN-1.6 complete with rubber etc.IS:780 of following sizes:Make :– Zoloto / Kirloskar / Kartar / ISI 80 mm dia	4	Nos
195	195	Providing, fixing, testing & commissioning of cast iron flanged IS marked Butterfly Valve class PN-1.6 complete with rubber etc.IS:780 of following sizes:Make :– Zoloto / Kirloskar / Kartar / ISI 25 mm dia	1	Nos
196	196	Providing ,fixing testing and commissioning of Flexible rubber Bellows double flanged as below. 100 mm dia	2	Each
197	197	Providing ,fixing testing and commissioning of Flexible rubber Bellows double flanged as below. 80 mm dia	2	Each
198	198	Providing & fixing carbon steel Fire man axe with rubber insulated handle tested to 20000 volts.Make – New Age /Omex/ G Tech / Safe Fire	2	Nos
199	199	Providing and fixing Carbon-di-oxide Fire Extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube. 30cms long high pressure discharge hose. Discharge nozzle,suspension bracket, confirming to IS:934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. (CCOE Nagpur Approved clynders) Capacity 4.5 Kg.Make :– Life guard /Omex/ Getech / Safex / Safe Fire	12	Nos
200	200	Providing and fixing of ABC type (Stored Pressure) Fire Extinguisher I.S.I marked & T.A.C.approved complete in all respect.4 kg. capacity Make :– Life guard / Omex/ Getech / Safex / Safe Fire	12	Nos
201	201	Supplying,Installatoin,Testing,& Commissioning of electric driven Hydrant Pump suitable for automatic operation consisting of the following complete in all respects as required.Horizontal type,multi stage,centrifugal,split casing pump of cast iron body & bronze impeller with stainless steel shaft,mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm at highest and farthest oulet at specified flow of 2280 LPM at 70 M head conforming to IS:152 Suitable HP Squirrel cage induction motor,TEFC synchronous speed1 RPM,suitable for operation on 415 V3 phase 50 Hz,AC with IP 55 protection for enclosure,horizontal foot mounted type with class F insulation,conforming to IS:325.Pump set shall be assembled at works and tested to satisfy performance requirements.MS fabricated Common base plate,coupling,coupling guard,found bolts etc as require Suitable cement concrete pump foundation duly plastered with anti vibration pads.Make :– Kirloskar / Mather & Platt / ABB / CGL / Greaves	1	Nos
202	202	Supply, installation, testing and commissioning of gun matel body air release valve complete with all fitting as equired like ball vlave,holdtite,suta etc.Make : Precious/zolto/swastik	2	Nos
203	203	Supply, Installation, testing and commissioning of Cast Iron body 'Y' Strainer complte with all fitting as requied like MS flange, nut bolts,washers etc.Make : Castle/Deepak/Kartar 80 mm dia	1	Nos
204	204	Supply, installation, testing and commissioning of main fire alarm panel supply source (230AC 50 Hz and 24 V DC) 24V out put supply for detector. fault indication open, short circuit in detector line. visual indication fire, fault, open, short & system on. 4 Zone. Make : Agni	1	Nos
205	205	Supply, installation, testing and commissioning of MS body electronic sounder ( hooter ).	4	Nos
206	206	Supply, installation, testing and commissioning of MS body manual call point. Make agni	4	Nos
207	207	Supply, laying, testing and commissioning of 1.5Sq.mm PVC insulated copper conductor single core wire in the existing PVC conduit as required. Make : Anchor / Pollycab / Great White / Equivalent	200	Rmt
208	208	Supply, laying, testing and commissioning of 20mm PVC conduit along with accessories complete as required.Make : Sidhbali / Kalinga / Equivalent	200	Rmt

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Uttarakhand Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Auditorium Building In Narendra Nagar Of Distrect Tehri Garhwal Under Deposit Head, At Narendranagar-Uttarakhand

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Auditorium Building In Narendra Nagar Of Distrect Tehri Garhwal Under Deposit Head, At Narendranagar-Uttarakhand

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us