| 1 | 1 | Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out complete all as specified and directed. | | 43 | Cum |
|---|
| 2 | 2 | M&L Hardcore of broken bricks of gauge n. exc 63mm, deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.. | | 8 | Cum |
|---|
| 3 | 3 | M&L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete or in sub base of floors complete all as specified and directed. | | 12.4 | Cum |
|---|
| 4 | 4 | S&F Mild steel 10mm dia and over TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. | | 3212 | Kg |
|---|
| 5 | 5 | S&F Mild steel 8mm dia TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups complete all as specified and directed. | | 1050 | Kg |
|---|
| 6 | 6 | M&L for Use & waste wooden form work (rough finished) to sides of footing, Beams, etc complete all as specified and directed. | | 175 | Sqm |
|---|
| 7 | 7 | M&L for Formwork to sides of pillars, posts, struts, piers,columns, and stanchions Square, rectangular or polygonal etc. complete all as specified and directed. | | 145 | Sqm |
|---|
| 8 | 8 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed. | | 90 | Sqm |
|---|
| 9 | 9 | M&L Reinforced cement concrete (Design mixed M-25) using 20mm graded stone aggregate as in columns, Footings and the like complete all as specified and directed. | | 25 | Cum |
|---|
| 10 | 10 | M&L Reinforced cement concrete (Design mixed M-25) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 metre span and chajjas complete all as specified and directed. | | 18 | Cum |
|---|
| 11 | 11 | M&L Reinforced cement concrete (Design mixed M-25) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed. | | 14 | Cum |
|---|
| 12 | 12 | M&L Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and directed. | | 30 | Sqm |
|---|
| 13 | 13 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. | | 33.5 | Cum |
|---|
| 14 | 14 | Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed. | | 12.2 | Cum |
|---|
| 15 | 15 | M&L cement concrete 1:2:4 Type B-1 using 12.5 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. | | 1.26 | Cum |
|---|
| 16 | 16 | M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed. | | 43.9 | Cum |
|---|
| 17 | 17 | All as pr item No 16 above but except brick using old bricks retrieved from demolition complete all as specified and directed. | | 1.5 | CUM |
|---|
| 18 | 18 | M&L Brickwork in cement mortar 1:6 using sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in complete all as specified and directed. | | 7 | Sqm |
|---|
| 19 | 19 | M&L rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, using WPC @ 2% by weight of cement, surfaces finished fair and even complete all as specified and directed. (Note: WPC shall be measured and paid separately). | | 5590 | Sqm |
|---|
| 20 | 20 | Supply only integral water proofing compound (ISI Marked) complete all as specified and directed. | | 50 | Kg |
|---|
| 21 | 21 | M&L Rendering/plastering, 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed. | | 211 | Sqm |
|---|
| 22 | 22 | M&L rendering/plastering, 5mm thick in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed. | | 85 | Sqm |
|---|
| 23 | 23 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed. | | 320 | kgs |
|---|
| 24 | 24 | S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed. | | 10 | RM |
|---|
| 25 | 25 | S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed. | | 10 | RM |
|---|
| 26 | 26 | S&F factory made 2nd class hardwood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial venneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. | | 12 | Sqm |
|---|
| 27 | 27 | S&F 2nd class hardwood 35mm thick glazed and skelton shutter open rebated and prepared to received glass, gauge etc (without sash bars) edge of framping plain chamfered or rounded fitted with cut and metered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed. | | 5 | Sqm |
|---|
| 28 | 28 | M&L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats form work complete all as specified and directed. Note: the rates for use of form work shall be included in unit rate of cement concrete. | | 13.5 | Cum |
|---|
| 29 | 29 | S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed | | 10 | Sqm |
|---|
| 30 | 30 | S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed. | | 10 | Sqm |
|---|
| 31 | 31 | S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed. | | 5 | Sqm |
|---|
| 32 | 32 | S&F 300mm ordinary rat tail rod pattern springs including rolled and roller plate complete all as specified and directed. | | 4 | Each |
|---|
| 33 | 33 | S&F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed. | | 4 | Each |
|---|
| 34 | 34 | S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified and directed. | | 8 | Each |
|---|
| 35 | 35 | S&F Mild steel pressed handle, oval type, 125 mm size, stove enameled black and fixed with steel screws, complete all as specified and directed. | | 8 | Each |
|---|
| 36 | 36 | S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm complete all as specified and directed. | | 28 | Sqm |
|---|
| 37 | 37 | S&F glavanised mild steel wire cloth 0.56 nominal dial of wire and average width of aperature 1.18mm and fixed with tinned tack or galvanised staple. complete all as specified and directed. | | 30 | Sqm |
|---|
| 38 | 38 | S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 145 of MES Schedule Part-II (2010). complete all as specified and directed. | | 10 | RM |
|---|
| 39 | 39 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Make: Rajshri or other equivalent make as approved by GE | | 3.8 | Sqm |
|---|
| 40 | 40 | S&F PTMT butt hinges 100 mm long complete all as specified and directed. | | 3 | Each |
|---|
| 41 | 41 | S&F PTMT Tower bolt 150 mm long complete all as specified & directed | | 2 | Each |
|---|
| 42 | 42 | S&F PTMT pressed handle 150 mm size oval type stove enamelled black complete all as specified & directed. | | 2 | Each |
|---|
| 43 | 43 | M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. | | 14 | Cum |
|---|
| 44 | 44 | M&L 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub floors, sub bases, floors etc.complete all as specified and directed. | | 60 | Sqm |
|---|
| 45 | 45 | M&L Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 400x400x7mm thick as in floor set and jointed in white cement with pigment to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. | | 45 | Sqm |
|---|
| 46 | 46 | M&L Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 300x300x7mm thick as in floor set and jointed in white cement with pigment to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. | | 4 | Sqm |
|---|
| 47 | 47 | M&L Glazed ceramic coloured (colour & shade as approved) tiles of size 300x200x7mm thick on vertical surface set and jointed in neat cement slurry over 10mm thick rendering cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. | | 20 | Sqm |
|---|
| 48 | 48 | S&F 500 litres capacity rotational moulded, rendering triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings, complete all as specified and directed. | | 1 | Each |
|---|
| 49 | 49 | S&F20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. | | 1 | Each |
|---|
| 50 | 50 | S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed. | | 25 | RM |
|---|
| 51 | 51 | S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed. | | 25 | RM |
|---|
| 52 | 52 | S&F as in repair Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing complete all as specified and directed. | | 1 | Each |
|---|
| 53 | 53 | S & F for vitreous china squatting pan of pattern “Orissa Pattern” size 580 mm x 440 mm white with ‘P’ or ‘S’ trap, front or back inlet any pattern including provision of lime concrete bedding etc complete all as specified and directed. | | 1 | Each |
|---|
| 54 | 54 | M&L 10 ltr capacity PVC low level flushing cistern syphonic action type with inlet ball valve, float and handle and including bracket and flush pipe complete all as specified and directed. Make:- Parryware (Slimline) / Hindware (Sleek) or other equivalent make as approved by GE. | | 1 | Each |
|---|
| 55 | 55 | M&L as in repair Vitrous china (White) flat back urinal of size 465x355x265mm with grating, union for discharge pipe, spreader, 40mm dia PVC waste pipe upto floor trap, , flush pipe, union for discharge pipe complete all as specified and directed. | | 2 | Each |
|---|
| 56 | 56 | S&F Vitreous china urinal partition white of size 310x700 mm.complete all as specified and directed. | | 1 | Each |
|---|
| 57 | 57 | S&F 100mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with connections are fitted/sealed with M-seal including joints fixed to wall complete all as specified and directed. | | 6 | RM |
|---|
| 58 | 58 | All as per item No 59 above but size 75mm. complete all as specified and directed. | | 6 | RM |
|---|
| 59 | 59 | S&F cast iron Nahani trap 100 mm dia with gratting including jointing to waste pipe fixed with concrete cement in (1:2:4) type B1 using 20 mm graded stone aggregate etc complete all as specified and directed. | | 2 | Each |
|---|
| 60 | 60 | S&F Cast iron floor trap of 100 mmdia, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) typee B1 used 20 mm graded stone aggregate complete all as specified and directed. | | 1 | Each |
|---|
| 61 | 61 | S&F High density polythelne pipe of 50 mm bore dia (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or laid in floors etc. complete all as specified and directed. | | 2 | RM |
|---|
| 62 | 62 | S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed. | | 5 | Each |
|---|
| 63 | 63 | S&F waste coupling of bore dia 32 mm of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms)complete all as specified and directed. | | 1 | Each |
|---|
| 64 | 64 | S&F waste coupling of bore dia 32 mm of PTMT but suitable for urinals (Minimum weight 32mm-45gms)complete all as specified and directed. | | 2 | Each |
|---|
| 65 | 65 | S&F as in repair PVC waste pipe, 32 mm bore suitable to waste coupling pipe attach with rubber ring joints complete all as specified and directed. | | 3 | Each |
|---|
| 66 | 66 | S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed. | | 1 | Each |
|---|
| 67 | 67 | S&F bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed. | | 5 | Each |
|---|
| 68 | 68 | S&F Stop/Angle Valve 15mm bore fancy type CP, Screwed down high pressure, with high pressure crutch or butterfly handle, screwed both ends for iron pipe or union complete all as specified and directed. | | 4 | Each |
|---|
| 69 | 69 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed | | 2 | Each |
|---|
| 70 | 70 | S&F as in repair 600x450 mm beveled edge looking mirror of selected quality glass and backing with PVC frame and fixed to wall with PVC rawl plugs with steel screws and cup washers complete all as specified and directed. | | 1 | Each |
|---|
| 71 | 71 | S&F 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified and directed. | | 1 | Each |
|---|
| 72 | 72 | S&F Decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs complete all as specified and directed. | | 10 | RM |
|---|
| 73 | 73 | M&L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | | 78 | Sqm |
|---|
| 74 | 74 | M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces complete all as specified and directed. | | 45 | Sqm |
|---|
| 75 | 75 | M&L Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified and directed. | | 175 | Sqm |
|---|
| 76 | 76 | M&L for White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed. | | 85 | Sqm |
|---|
| 77 | 77 | Demolition of brick work built in cement mortar of any specification and in any position complete all as specified and directed. | | 9 | Cum |
|---|
| 78 | 78 | Taking down cement plaster from brick walls or concrete surfaces of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. | | 5150 | Sqm |
|---|
| 79 | 79 | Demolition of cement concrete (unreinforced) of any descripion and in any position not otherwise specifically provided for including Sunken portion.complete all as specified and directed. | | 13 | Cum |
|---|
| 80 | 80 | M&L for preparation of new wall surface & applying two coats of cement base paint (camouflage) over a coat of white wash as a primer.complete all as specified and directed. | | 5455 | Sqm |
|---|
| 81 | 81 | S&F in Repair Galvanised iron two strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs @ 75mm c/c spacing and straining and fixing to any type of standard rail, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pin, complete all as specified and directed. Note : Each line of wire shall be measured. | | 125 | Per 100 RM |
|---|
| 82 | 82 | S&F Preparation of old decorated surface of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | | 170 | Sqm |
|---|
| 83 | 83 | Dismantling of asbestos cement (corrugated or semi corrugated ) sheets in roof covering any thickness and description complete all as specified and directed. | | 35 | Sqm |
|---|
| 84 | 84 | Dismentaling timber in fillets, rails, posts, rafters,purlins etc under 40 sq. cm in section fixed in any position. complete all as specified and directed. | | 185 | RM |
|---|
| 85 | 85 | Dismantling plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering complete all as specified and directed. | | 25 | Sqm |
|---|
| 86 | 86 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.5 sqm n.exc 4 sqm each.complete all as specified and directed. | | 4 | Each |
|---|
| 87 | 87 | Taking down shutter exc 1sqm but n.exc 2sqm each complete all as specified and directed. | | 1 | Per Leaf |
|---|
| 88 | 88 | Dismantling trellies work (jafri) including taking as under of battens in trellis two way complete all as specified and directed. | | 10 | Sqm |
|---|
| 89 | 89 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed | | 3 | cum |
|---|
| 90 | 90 | M&L 6mm thick AC corrugated or semi-corrugated sheets in roof fixed with L type or J type or cranked hooks bolts complete all as specified and directed. | | 35 | Sqm |
|---|
| 91 | 91 | M&L 2nd class hard wood plain fillets exc 13 and n.exc 25sqm, clean sawn fixed with nails.complete all as specified and directed. | | 185 | RM |
|---|
| 92 | 92 | S & F 1 mm thick plain, galvanised mild steel sheeting in ridges,hips,valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 fixed with 'screw. complete all as specified and directed. | | 25 | Sqm |
|---|
| 93 | 93 | M & L for 40 mm thick flush shutters solid core construction with particle board core and plywood face panels, commercial type on both sides and fixed to chowkhats complete all as specified and directed. | | 1.95 | Sqm |
|---|
| 94 | 94 | S&F MS butt hinges medium weight cold rolled 100mm long complete all as specified and directed. | | 6 | Each |
|---|
| 95 | 95 | S&F Aluminium anodized barrel tower bolts, extruded section 150mm long.complete all as specified and directed. | | 4 | Each |
|---|
| 96 | 96 | S&F Aluminium anodized handles, D type, 150mm longcomplete all as specified and directed. | | 24 | Each |
|---|
| 97 | 97 | S&F aluminium sliding door bolt 300 mm long, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate or concrete surfaces, finished fair and even. complete all as specified and directed. | | 5 | EACH |
|---|
| 98 | 98 | M & L rendering 15 mm thick in CM (1:4) on brick or concrete walls surfaces fair and even walls complete all as specified and directed. | | 120 | Sqm |
|---|
| 99 | 99 | M&L for Providing precast cement concrete 1:2:4 type B-01 using 12.5mm graded crushed stone aggregates louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame (pre cast frame shall be measured and paid seperately ) set in cement mortar 1:4 complete all as specified and directed. | | 10 | sqm |
|---|
| 100 | 100 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor .complete all as specified and directed. | | 5 | Per 10 Sqm |
|---|
| 101 | 101 | M&L for Kota stone slabs, 18-20mm thick, machine cut as in flooring of size not less than 0.25 Sqm each, set and jointed in cement slurry over & including screed bed of 20mm thick in meter cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing (mirror type) complete all as specified and directed | | 50 | sqm |
|---|
| 102 | 102 | M & L complete removal of existing treatment on old wall surfaces by brooming down or steel wire brushing all as directed and applying one coat of cement base paint on walls including peparation of surface of existing treatment on old wall surfaces complete all as specified and directed. | | 180 | SQM |
|---|
| 103 | 103 | M & L preparation of surface & applying two coats of OBD on newly plastered surfaces of walls including preparation of surface.complete all as specified and directed | | 25 | SQM |
|---|
| 104 | 104 | M & L complete removal of existing treatment on old wall surfaces by brooming down or steel wire brushing all as directed and applying one coat of OBD on walls including priparation of surface of existing treatment on old wall surfaces complete all as specified and directed. | | 35 | Sqm |
|---|
| 105 | 105 | M&L preparation of old surface of AC sheet over 10 cm width or girth and applying one coat of synthetic enamel roof paint over a priming paints coat complete all as specified and directed. | | 750 | Sqm |
|---|
| 106 | 106 | M&L preparation of New surface of AC sheet over 10 cm width or girth and applying two coat of synthetic enamel roof paint over a priming paints coat complete all as specified and directed. | | 35 | Sqm |
|---|
| 107 | 107 | M & L preparation of old steel surfaces exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. . | | 120 | Sqm |
|---|
| 108 | 108 | M & L 3 mm thick wall care putty on wall complete all as specified and directed. | | 635 | Sqm |
|---|
| 109 | 109 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. | | 250 | Sqm |
|---|
| 110 | 110 | M&L for PVC Wall Lining/ Wall Cladding wood grain printed PVC sheet consisting of 5mm thick Plain colour PVC sheet incluseive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. | | 335 | Sqm |
|---|
| 111 | 111 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. | | 700 | RM |
|---|
| 112 | 112 | S&F anodized aluminium frame for doors , windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed. | | 20 | Kg |
|---|
| 113 | 113 | S&F anodized aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminium snap beading screws etc. complete all as specified and directed. | | 5 | Sqm |
|---|
| 114 | 114 | S&F door closer hydraulically reguleted designation No 3 universal type, Suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg. complete all as specified and directed. | | 3 | Each |
|---|
| 115 | 115 | S&F Sheet glass 4.8 mm thickness Ordinary quality and glazing with oil putty in Squares exc 0.5 Sqm Each Pane, complete all as specified and directed. | | 3 | Sqm |
|---|
| 116 | 116 | M&L for Preparation of old surface of wall and applying one coat of OBD complete all as specified and directed. | | 6700 | Sqm |
|---|
| 117 | 117 | S&F Stop valves 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. | | 15 | Each |
|---|
| 118 | 118 | S&F chomium plated Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. | | 15 | Each |
|---|
| 119 | 119 | S&F Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. | | 15 | Each |
|---|
| 120 | 120 | S&F Ball valves high pressure of PTMT of 20 mm bore dia with epoxy coated Aluminium rod & high-density plastic ball & screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/20mm-210 gms/25mm-455gms/ 40mm- 690 gms)complete all as specified and directed. | | 10 | Each |
|---|
| 121 | 121 | S&F shower arm 15mm size, 195mm long with bend of 45degreee with flange of PTMT any colour. (Minimum weight 40 gms)complete all as specified and directed. | | 10 | Each |
|---|
| 122 | 122 | S&F PVC connections 15mm size with PTMT nuts of length 450mm | | 15 | Each |
|---|
| 123 | 123 | S&F PVC Waste pipe 32 mm bore suitable to waste coupling attch with rubber ring joints fixed to waste coupling of sinks/ WHBs.complete all as specified and directed. | | 14 | Each |
|---|
| 124 | 124 | Supply and fix glazed and skelton shutters 30 mm thick 2nd class hard wood , open rebated and prepared to receive glass gauge etc(without sash bars), edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I section 8 clause 8.24(a) complete all as specified and directed. | | 6 | Sqm |
|---|
| 125 | 125 | S&F 100 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. | | 20 | Nos |
|---|
| 126 | 126 | M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of cement based paint including corneces, pillars etc complete all as specified and directed. | | 5200 | Sqm |
|---|
| 127 | 127 | S&F anodised aluminium snap grid frame 605 x 605 mm for false ceiling complete all as specified and directed. | | 120 | Sqm |
|---|
| 128 | 128 | M&L for Providing & fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed. | | 120 | Sqm |
|---|
| 129 | 129 | M&L Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 deep and getting out soft/loose soil complete all as specified and directed. | | 36 | sqm |
|---|
| 130 | 130 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade over and including 50 mm thick sand layer complete all as specified and directed. | | 36 | sqm |
|---|
| 131 | 131 | Continous brick edging; with width equal to the length of the brick; laid dry on edge vertically complete all as specified and directed. | | 30 | Rm |
|---|
| 132 | 132 | M&L 150mm dia salt glazed stone wall drain pipe laid in trenches and jointed in CM 1:1 complete all as specified and directed. | | 14 | RM |
|---|
| 133 | 133 | M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore pipe. complete all as specified and directed. | | 14 | RM |
|---|
| 134 | 134 | M & L Precast RCC 1:2:4 type B1 using 20mm graded crushed stone agg as in manhole cover slabs, of any thickness, size or shape including necessary form work, finished concrete surfaces fair & even in CM complete all as specified and directed. | | 0.15 | Cum |
|---|
| 135 | 135 | M&L for provn of brick construction septic tank for 10 users (size 2.00m x 09 m) complete all as per specification and shown on Drg No CEJZ/STD-242/07 Sheet No 17/24, 18/24, 19/24 & 20/24 complete all as specified and directed. | | 1 | Each Job |
|---|
| 136 | 136 | M&L for brick construction soakage well 1.20 m dia and 1.5 m effective depth for 10 user's septic tank complete all as specification and shown on Drg No CEJZ/STD-242/07 sheet No 13/24 Complete all as specified and directed. | | 1 | Each Job |
|---|
| 137 | 137 | M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated,FRLS multistranded, single core unsheathed, copper conductor cables drawn through and including PVC conduit with all accessories concealled in wall and fixed to ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed,multi stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth dolly including sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell point controlled by one ,one way switch complete all as specified and directed. | | 12 | Per Point |
|---|
| 138 | 138 | All as per item No 1 above but One 3 pin socket outlet 5 Amps on the same board with other switches with cable 1.5 Sqmm size complete all as specified and directed. | | 1 | Per Point |
|---|
| 139 | 139 | All as per item No 1 above but One 3 pin socket outlet 5 amps independent board with cable 1.5 Sqmm size complete all as specified and directed. | | 4 | Per Point |
|---|
| 140 | 140 | All as per item No. 4 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable. complete all as specified and directed. | | 1 | Per Point |
|---|
| 141 | 141 | S&F Switch piano flush type 5 amps, single pole one way duly ISI marked.complete all as specified and directed. | | 17 | Each |
|---|
| 142 | 142 | S&F Switch piano flush type 15 amps, single pole, one way ISI marked. complete all as specified and directed. | | 1 | Each |
|---|
| 143 | 143 | S&F Socket outlet 2 in 1 3 pin , 5 Amps, duly ISI marked, complete all as specified and directed. | | 5 | Each |
|---|
| 144 | 144 | S&F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type duly ISI marked. complete all as specified and directed. | | 1 | Each |
|---|
| 145 | 145 | S&F Ceiling rose surface type, bakelite 65 x 50mm, 2 to 3 terminals duly ISI marked. complete all as specified and directed. | | 10 | Each |
|---|
| 146 | 146 | S&F in replacement of Lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendant / batten/angle holder fitting complete all as specified and directed .Make-Havells, or other equivalent make as approved by GE. | | 2 | Each |
|---|
| 147 | 147 | S&F LED bulb of 10 watt complete all as specified and directed..Make-Havells,Model No-LED ADORE 10W B22 CDL BALL LAMP or other euivalent make as approved by GE. | | 2 | Each |
|---|
| 148 | 148 | S&F in replacement of LED 20 W indoor decorative batten with extruded aluminium housing fixed to wall/ ceiling etc complete with efficient heat dissipation with polycarbonate diffuser & integrated electronic driver.Make-Havells, Model-Endura Linear Neo (LHEWEBP7IN1W020) or Equivalent of Philips/C&S make. | | 4 | Each |
|---|
| 149 | 149 | S & F bldg LED Security light fittings 25 watts .including GI bracket bend to shape made out of GI pipe light grade 40 mm of suitable size up to 1.2 mtr long etc complete with MS clamps duly painted with two coats of aluminium paint with nuts/bolts/washers and all fixing arrangements to pole/wall including connecting up with 2 core cable complete all as specified and directed.Make- Crompton, Model-ASTRA, Cat Part No-LSTP-25-CDL or Equivalent OF HAVELLS/BAJAJ. | | 2 | Each |
|---|
| 150 | 150 | S&F Sheet metal enclosures Single door, factory made, made out of CRCA mild steel sheet 1.2 mm thick with matellic painting, IP-42 protection surface mounting 240 volts, 8 way dust and vermin proof suitable for incorporation of Isolator / MCBs. duly concealed in wall and making good the distrubed surface and colour matching complete all as specified and directed. | | 1 | Each |
|---|
| 151 | 151 | S&F steeped type electronic fan regulator flush type complete all as specified and directed. | | 4 | Each |
|---|
| 152 | 152 | S&F MCB single pole neutral 240 volts, 32 Amps, 10 KA complete all as specified and directed. | | 1 | Each |
|---|
| 153 | 153 | S&F MCB single pole 240 volts, 06 to 32 Amps, 10 KA complete all as specified and directed. | | 6 | Each |
|---|
| 154 | 154 | S&F ceiling fan 1200mm sweep single phase 230 Volts, standard ceiling fan rated including provision of down rod, hanging clamp with rubber real nuts bolts, spring washers and locking of splite pin, plastic canopy with screw and flexible copper conductor 23/0.0076 three core from ceiling rose to connector max upto 1.5 meter length complete all as specified. Make :- Crompton, Models-Standard Ceiling Fans, HS Crypto (1200) or equivalent in Havells/Bajaj/Usha\nNote :- (i) The same will be connected electrically in the existing point wiring, exist at Bldg/working spot. (ii) Circuit to be tested before connection of electrical items. | | 4 | Each |
|---|
| 155 | 155 | M&L Stop cock cast copper allow, 20 mm bore, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or union fixed in rpairs complete all as specified and directed. | | 3 | Each |
|---|
| 156 | 156 | S&F GI tubing and connections medium grade 20mm galvanised with all fittings and fixed complete to walls and celling or laid in floor etc complete all as specified and directed. | | 100 | Rm |
|---|
| 157 | 157 | M&L for cutting of existing GI tubing 25mm dia for making new conncetion, inserting un equal Tee 25X25X20mm dia including necessary excavation, returning filling and removal etc. complete all as specified and directed. | | 1 | Each Job |
|---|
| 158 | 158 | M&L for house service bracket (hook type) complete with 3.0 m long G.I pipe 40 mm dia Med. Grade,two nos. 90 degree bends, M.S hook and stay or guy. complete all as specified and directed. | | 1 | Each |
|---|
| 159 | 159 | Supplying and laying solid 1100 Volt grade heavy duty cable PVC insulated aluminium conductor,served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1m apart including 4mm suspension wire,one three core cable flat or circular of size 16 Sqmm. complete all as specified and directed. | | 80 | Rm |
|---|
| 160 | 160 | M&L Earthing complete with galvanised steel earth plate electrode 60x60x6.3mm thick, buried directly in ground earth pit not less than 2.25 metres deep below ground level with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised iron or steel all as shown in electrical plate No.5 of SSR Part-I connected to continuous earth wire protected by 15mm dia GI light grade protection pipe from test point to main board and 20mm GI medium grade watering pipe funnel, PCC earth pit and RCC cover charcoal, salt and GI wire including excavation earth work etc complete all as specified and directed at site. | | 1 | Each |
|---|
