| 1 | 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means | BI01010001010000000000000515BI0100001113 | 162.17 | Cum |
|---|
| 2 | 2 | Excavation for foundation in laterite rock (soft or hard) including trimming and levelling the bed for the foundation, removing the excavated material up to a distance of 50 metres beyond the building area, stacking as directed, dewatering and back filling with available murum, watering, ramming etc. complete. (Lift upto 1.5 m.) By Mechanical Means | BI01010001010000000000000515BI0100001114 | 243.25 | Cum |
|---|
| 3 | 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. | BI01010001010000000000000515BI0100001115 | 53.7 | Cum |
|---|
| 4 | 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001116 | 63.9 | Cum |
|---|
| 5 | 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001117 | 30 | Cum |
|---|
| 6 | 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001118 | 20.4 | Cum |
|---|
| 7 | 7 | Providing Laterite Stone masonary in C.M. 1:6 in foundation and plinth including racking out joints when plastering is to be done watering and scaffolding | BI01010001010000000000000515BI0100001119 | 47.6 | Cum |
|---|
| 8 | 8 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. | | 68.2 | Cum |
|---|
| 9 | 9 | Providing laterite stone masonry in cemen morter 1 : 6 in superstructure including racking put joints where plastring is to be done watering & scaffolding complete. | BI01010001010000000000000515BI0100001120 | 107.3 | Cum |
|---|
| 10 | 10 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001121 | 41.93 | Cum |
|---|
| 11 | 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001122 | 44.2 | Cum |
|---|
| 12 | 12 | Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001123 | 1.9 | Cum |
|---|
| 13 | 13 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. | BI01010001010000000000000515BI0100001124 | 10 | M.T. |
|---|
| 14 | 14 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete | BI01010001010000000000000515BI0100001125 | 0.757 | Cum |
|---|
| 15 | 15 | Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) | BI01010001010000000000000515BI0100001126 | 27.13 | Sqm |
|---|
| 16 | 16 | Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box | BI01010001010000000000000515BI0100001127 | 40.08 | Sqm |
|---|
| 17 | 17 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. | BI01010001010000000000000515BI0100001128 | 0.54 | sqm |
|---|
| 18 | 18 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. | | 3 | Smt |
|---|
| 19 | 19 | Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. | | 50.7 | Sqm |
|---|
| 20 | 20 | Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. | | 54.7 | Sqm |
|---|
| 21 | 21 | Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring | | 237.7 | Sqm |
|---|
| 22 | 22 | Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Skirting | | 9.66 | Sqm |
|---|
| 23 | 23 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. | | 857.71 | Sqm |
|---|
| 24 | 24 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. | | 358.04 | Sqm |
|---|
| 25 | 25 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. | | 214.49 | Sqm |
|---|
| 26 | 26 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). | | 5.5 | Sqm |
|---|
| 27 | 27 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. | | 1072.2 | Sqm |
|---|
| 28 | 28 | Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. | | 334.28 | Sqm |
|---|
| 29 | 29 | Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. | | 7.48 | Sqm |
|---|
| 30 | 30 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. | | 101.8 | Sqm |
|---|
| 31 | 31 | Providing and fixing orissa type colour glazed earthenware 625 x 450 mm. w.c. pan including trap, C.I. soil and vent pipe upto the out side face of wall including 100 mm. dia. C.I. plug, bend, 15mm. thick 10 litre PVC flushing cistern with all necessary pipe connection etc. complete. | | 2 | Nos |
|---|
| 32 | 32 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete. | | 3 | Nos |
|---|
| 33 | 33 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. | | 20 | R.M |
|---|
| 34 | 34 | Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. | | 5 | Nos |
|---|
| 35 | 35 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. | | 1 | Nos |
|---|
| 36 | 36 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete. | | 2 | Nos |
|---|
| 37 | 37 | Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polish | | 13.2 | Sqm |
|---|
| 38 | 38 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | | 1.96 | Cum |
|---|
| 39 | 39 | Providing, laying and fixing P.V.C. pipe of 15mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. | | 20 | R.M |
|---|
| 40 | 40 | Providing, laying and fixing P.V.C. pipe of 20mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. | | 30 | R.M |
|---|
| 41 | 41 | Providing, laying and fixing P.V.C. pipe of 25mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. | | 50 | R.M |
|---|
| 42 | 42 | Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. | | 2 | Nos |
|---|
| 43 | 43 | Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. | | 5 | Nos |
|---|
| 44 | 44 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres | | 5000 | Liter |
|---|
| 45 | 45 | Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. \na) Marble other than white makraDeleted | | 27.9 | Sqm |
|---|
| 46 | 46 | Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. | | 4.7 | Sqm |
|---|
| 47 | 47 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. | | 3 | Sqm |
|---|
| 48 | 48 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. | | 1.941 | M.T. |
|---|
| 49 | 49 | Providing and fixing colour Zinc calcium (R) AZ 150 ( mi 150 gms/Sqm total on each side) profiled sheets roofing the feed material thickness (Bmt) (05 mm TCT) Hi strength steel with min 550 mpa yield stength metalic hot dip coated with Aliminium -Zinc alloy (55% aluminium 43.4% Zinc 1.60% silicon) with colourbond (R) steel quality super durable polyster paint coat (with inorganic pigment) The paint shall have a total coating thickness of nominal 35 um comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with suitable sqare fluting in the five pan at nominal 180-250 mm center to center The end rib shall be designed for anticapillary groove and return leg the feed material should have coil manufactured product details marked a regular interval including fasteners with min. fastened with min. 25 um Zinc Tin alloy coated Hex Head self drilling screw etc complete. | | 288.18 | Sqm |
|---|
| 50 | 50 | Preparing Name board as per direction on plaster surface including all oil painting and lettering etc com. | | 1 | Nos |
|---|
| 51 | 51 | Testing Charges Coaese Aggregates Gradation | | 4 | Nos |
|---|
| 52 | 52 | Specific Gravity, Water Absorption, Crushing Value,and Impact Value | | 2 | Nos |
|---|
| 53 | 53 | Soundness | | 2 | Nos |
|---|
| 54 | 54 | F.I and E.I | | 2 | Nos |
|---|
| 55 | 55 | Fine Aggergate Fineness Modulus, Silt Content | | 4 | Nos |
|---|
| 56 | 56 | Silt Content | | 4 | Nos |
|---|
| 57 | 57 | Sulphate & Chloride | | 2 | Nos |
|---|
| 58 | 58 | Cement Fineness, Initial Setting Time, Final Setting Time, Compressive Strength, Soundness | | 4 | Nos |
|---|
| 59 | 59 | Concrete Compressive Strength | | 8 | Nos |
|---|
| 60 | 60 | Concrete Mix Design | | 1 | Nos |
|---|
| 61 | 61 | Compressive Strength | | 1 | Nos |
|---|
| 62 | 62 | Reinforcement Steel Tensile Strength, Elongation, Weight per Meter, Bend and Rebend Test | | 1 | Nos |
|---|
| 63 | 63 | Tensile Strength, Elongation, Weight per Meter, Bend and Rebend Test | | 1 | Nos |
|---|
| 64 | 64 | Ceramic / Vetrified tiles W.A. Rapture | | 2 | Nos |
|---|
| 65 | 65 | Aluminium Section Thickness/W.P.M | | 1 | Nos |
|---|
| 66 | 66 | P.V.C.Pipes W.P.M,Dia & Wall thickness | | 1 | Nos |
|---|
| 67 | 67 | Paving Blocks Water Absorption, Density and Compressive Strength | | 1 | Nos |
|---|
| 68 | 68 | Laterite Stone Water Absorption, Density and Compressive Strength | | 1 | Nos |
|---|
| 69 | 69 | Wood Density,Moisture Content | | 1 | Nos |
|---|
| 70 | 70 | Royalty | BI01010001010000000000000515BI0100001129 | 18.98 | Brass |
|---|