| 1 | 1 | Earthwork in excavation upto a depth of 2m below the existing ground level for foundation trenches, footings of columns/walls retaining walls, septic tanketc., including bailing out water where necessary removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils.\n(a) In ordinary soil. | Item1 | 373.93 | m3 |
|---|
| 2 | 2 | Earth/ Sand filling in plinth in layers not exceeding 150mm thick \n(a) With earth/stone dust obtained by carriage upto 8 km | Item2 | 63.63 | m3 |
|---|
| 3 | 2.1 | (b) With available excavated earth including breaking of clods, consolidating each layer by ramming and watering with all lead and lifts. | Item3 | 261.75 | m3 |
|---|
| 4 | 3 | Providing brick soling in foundation and under floor with stone and laid to level level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.\n(a) Stone soling of thickness 100mm. | Item4 | 474.11 | m2 |
|---|
| 5 | 4 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).\n(a) In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using mixture machine) | Item5 | 17.76 | m3 |
|---|
| 6 | 5 | Stone masonry work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with unsize stone/ Mawthup both faces hammer dressed including bonding, providing face stone, through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed.\n(a) Random Rubble Masonry \n(i) In Sub- structure upto Plinth Level | Item6 | 40.62 | m3 |
|---|
| 7 | 6 | Providing and laying Concrete in Reinforced Cement Concrete Works using Concrete Mixture Machine with coarse sand & 20mm downgraded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). | | | |
|---|
| 8 | 6.1 | In Foundation and sub - structure including footing, columns with base, tie and plinth beam, pile cap, raft slab, base slab, RCC walls, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to PlinthLevel. (Without using admixture, plasticiser)\n(a) M20 or Prop. 1:11/2:3\n | Item8 | 97.4 | m3 |
|---|
| 9 | 6.2 | (b)In Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase etc. above plinth level upto 1st floor level. (Without using admixture, plasticiser)\nM15 or Prop. 1:2:4 (For Non-structural Works)\n\n | Item9 | 9.39 | m2 |
|---|
| 10 | 6.3 | (c)M20 or Prop. 1:1.5:3 | Item10 | 139.18 | m3 |
|---|
| 11 | 7 | Supplying, fitting and fixing in position reinforcement bars upto 1st floor level, conforming to relevant I.S Code for R.C.C Work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc and no measurements for the same is required).\n(a) From Primary Sources like TATA/ SAIL/ ESSAR/JINDAL/SHYAM/RINL\n(ii) Super Ductile (SD) TMT reinforcement bar. | Item11 | 338.95 | Qtl. |
|---|
| 12 | 8 | Providing form work of ordinary timber planking of thickness not less than 25mm and removal of the same for concrete members so as to give a rough finish including centering, shuttering, strutting and propping etc., for height of propping and centering of supporting floor to the soffit of the concrete member not exceeding 4.0M as specified for the following items:\n(a) Columns, Pillars, Posts & Strut\n(i) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face | Item12 | 541.98 | m2 |
|---|
| 13 | 8.1 | (b) Sides of tie beams, grade beams etc. at or below ground level requiring form work at sides only. | Item13 | 130.89 | m2 |
|---|
| 14 | 8.2 | (c) Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.\n (i) For depth not exceeding 1.0M.\n | Item14 | 566.31 | m2 |
|---|
| 15 | 8.3 | (d) Flat Surfaces such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas, balconies and the like.\n (i) Thickness of floors/ slab upto 200mm\n | Item15 | 786.32 | m2 |
|---|
| 16 | 8.4 | (e)(i) Staircase with sloping or stepped soffits including risers and stringers \nbut excluding Landing. | Item16 | 38.36 | m2 |
|---|
| 17 | 9 | Brick work in cement mortar with 1st class brick including racking out joints and curing complete in super-structure above plinth level upto 1st floor level including dewatering if necessary as directed.\nIn proportion 1:4 (1 cement : 5 sand)\n | Item17 | 126.65 | m3 |
|---|
| 18 | 10 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.\n In cement mortar 1:4 | Item18 | 1777.95 | m2 |
|---|
| 19 | 11 | 15mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.\nIn cement mortar 1:4 | Item19 | 1496.83 | m2 |
|---|
| 20 | 12 | 20 mm thick Cement plaster on fair side in two coats (backing coat 10mm and finishing coat 10mm thick) on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed.\n(b) In cement mortar 1:4 | Item20 | 34 | m2 |
|---|
| 21 | 13 | Providing Ceramic Tiles of Somany/ Orient/ Nitco/ Qutone make or equivalent of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pidilite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of tiles, complete at all levels as specified and directed (cement plastering to be measured and paid separately).\n3.25.1 Normal range (sizes 300mmx300mm and above)\nDeluxe range | Item21 | 43.06 | m2 |
|---|
| 22 | 14 | Providing, fitting and fixing anodised aluminium partition walls of standard sections, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels.\nPartly 5mm thick glass panes and 12mm prelaminated ply board (50% glazed - 50% laminated) | Item22 | 57.52 | m2 |
|---|
| 23 | 15 | Providing polished ceramic wall tiles of Somany/ Orient/ Nitco/ Qutone make or equivalent of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) or white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately).\n3.26.2 Executive range-2 (Sizes 300mmx450mm and above)\n(a) Regular Range\n\n\n | Item23 | 348.51 | m2 |
|---|
| 24 | 16 | Providing, fitting and fixing steel windows (including ventilators) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. \n(a) Openable\n | Item24 | 133.28 | m2 |
|---|
| 25 | 17 | Providing and fixing plain with special metal, sachputty and glazing clip in steel window / doors / cleastory windows including necessary cutting to required size for all floors. \n(a)Clear sheet glass panes (ii) 4.00 mm thick | Item25 | 133.28 | m2 |
|---|
| 26 | 18 | Providing wood work in frame (chowkats) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embedded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. \n1st Class Local timber (Pooma/Hollock/ Oak/ Gamari/ Diengrai and the like) | Item26 | 1.2 | m3 |
|---|
| 27 | 19 | Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness, joined together with continuous tongue and groove joints glued together with approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts, the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x 75 mm x 3.55mm) and furnishing with moulded timber beading of size 25mm x 15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately). \nWith 1st Class Local wood (Pooma/ Hollock/ Oak/ Gamari/ Diengrai and the like)\n(i) 40 mm thick.\n | Item27 | 56.24 | m2 |
|---|
| 28 | 20 | Steel work welded in built up sections, framed work including cutting, hoisting and fixing in positions and applying priming coat of red-lead paint including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed.\nIn trusses and trussed purlins up to 25m span and 15m overall height. | Item28 | 1.67 | Qtl. |
|---|
| 29 | 21 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) (Dyna roof / Sathyam/ Durakolor/ Century Wells/Prestar/Wonder Roof make or equivalent) at all levels including supplying, fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) (a)0.50 mm thick | Item29 | 29.94 | m2 |
|---|
| 30 | 22 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories like Ridges / Valley / Gutter / Flashing (Dyna roof / Sathyam/ Durakolor/ Century Wells/ Prestar/ Wonder Roof make or equivalent) at all levels including fitting and fixing self drilling, self tapping screws complete. \n(a) 0.50 mm thick | Item30 | 4.53 | m |
|---|
| 31 | 23 | 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement: 3 coarse sand: 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement:1 coarse sand: 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. | Item31 | 273.59 | m2 |
|---|
| 32 | 24 | Cement concrete works in topping 1:1:2 (1cement : 1sand : 2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor (base concrete to be measured and paid separately) to be laid in panels including curing complete as directed.\n(a) 20 mm thick | Item32 | 341.54 | m2 |
|---|
| 33 | 25 | Providing, fitting and fixing anodised aluminium framed glazed/laminated doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section with door style of size 88mm x 45mm x 2.5mm, top rails and bottom rails 50mm x 45mm x 2mm lock rails 50mm x 45mm x 2mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc. complete as specified and directed by the department at all levels (Glass panes/laminated board included).\n(a) 5mm clear glass | Item33 | 12.6 | m2 |
|---|
| 34 | 26 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, square or round M.S. bars with round headed bolts and nuts or screws.\n(a) Plain grill\n(iii) Fixed to Brickwork/ P.C.C/ R.C.C. | Item34 | 20.3 | kg |
|---|
| 35 | 27 | Finishing wall with two coats of waterproofing cement coatings of Unicem \"Shakti\" brand of required shade by thinning 1 part of paint with 1 part of water to give an even shade after thoroughlybrooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department. | Item35 | 926.6 | m2 |
|---|
| 36 | 28 | Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with alkali resistant primer of approved brand and manufacture after thoroughly brooming the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.\n(a) Priming coat with alkali resistant primer | Item36 | 2345.09 | m2 |
|---|
| 37 | 28.1 | (b)Top coat | Item37 | 2345.09 | m2 |
|---|
| 38 | 29 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. \n(a) With ready mixed paint , Wood primer (pink/ white)\n | Item38 | 164.74 | m2 |
|---|
| 39 | 30 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.\n(a) Surfaces over 100mm in width or girth.\n(i) General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | Item39 | 164.74 | m2 |
|---|
| 40 | 31 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.\n(a) Surfaces over 100mm in width or girth.\n(i) General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac | Item40 | 101.61 | m2 |
|---|
| 41 | 32 | Plinth Protection by providing 50mm thick Cement Concrete base in prop 1:3:6 (1 cement:3 coarse sand : 6 coarse agg. of 20mm nominal size) with a layer of 10mm thick cement plaster in prop 1:3 and finishing with a floating coat of neat cement including necessary levelling and preparing the subgrade complete as directed. | Item41 | 35.62 | m2 |
|---|
| 42 | 33 | Providing CC/ Brick/ Stone Open Surface Drain with 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.\n(a) With brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100 mm thick C.C (1:3:6) base over one brick flat soling.\n(i) 300mm wide and average 150mm deep | Item42 | 6.46 | Rm |
|---|
| 43 | 34 | Supplying, fitting, fixing brass fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary C.P. brass screws etc. complete. (bright natural matt & satin finished)\n(a) Tower Bolt\n(i) 150mm x 10mm | Item43 | 76 | Nos |
|---|
| 44 | 34.1 | (b) Door Handle\n(i) 150mm | Item44 | 76 | Nos |
|---|
| 45 | 34.2 | (c) Door latches -\n(i) 300mm x 16mm x 5mm | Item45 | 8 | Nos |
|---|
| 46 | 35 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)\n34.13.2 BASIN (WITHOUT PEDESTAL)\n(a) White.\n(i) Normal. | Item46 | 5 | each |
|---|
| 47 | 36 | Providing fitting & fixing laboratory sink with CI/MS brackets CP brass chain with rubber plug, PVC waste pipe including painting of fittings cutting and making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately) | Item47 | 1 | each |
|---|
| 48 | 37 | Providing fitting and fixing reccessed soap tray/soap dish complete as directed and specified.\n(a) Wall Soap Tray | Item48 | 5 | each |
|---|
| 49 | 38 | Providing, fitting and fixing CP towel rail complete as directed and specified.\n(a) With Hook \n(i) Medium | Item49 | 5 | each |
|---|
| 50 | 39 | Providing fitting and fixing vitreous water closet squatting pant (indian type W.C. Orissa pattern) with all fittings and fixures complete including cutting and making goods to the walls and floor wherever required.\n(Flushing Cistern to be paid separately). | | | |
|---|
| 51 | 39.1 | 34.1.1 Indian type W.C Orissa pattern of size 580x440mm\n (a) white. | Item51 | 2 | No |
|---|
| 52 | 40 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead, CP brass hinges and rubber buffers,\nCI/MS brackets, 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) \n(a) White\n(i) Medium. | Item52 | 3 | No |
|---|
| 53 | 41 | Supplying, fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\n(a) White\n(i) Normal. | Item53 | 5 | No |
|---|
| 54 | 42 | Providing, fitting and fixing chrome platted toilet paper holder complete as directed and specified \n(a) normal.\n | Item54 | 5 | No |
|---|
| 55 | 43 | Providing, fitting and fixing mirror with plastic frame of size 500x400mm complete as directed and specified.\n | Item55 | 3 | No |
|---|
| 56 | 44 | Supplying fitting & fixing PVC pipes/bends/Junctions etc of Supreme/Prince or other ISI approved make, including joining, fitting and fixing with clamps etc as necessary complete at all levels including below G.L as directed and specified. | | | |
|---|
| 57 | 44.1 | 34.36.1 PVC Pipes of 6 Kg/cm2 as directed and specified. | | | |
|---|
| 58 | 44.2 | (a) 110mm dia | Item58 | 10 | each |
|---|
| 59 | 44.3 | 34.36.3 87.5 degree PVC bend with door as directed and specified.\n(b) In exposed surfaces or in trenches.\n | | | |
|---|
| 60 | 44.4 | (c) 110mm dia | Item60 | 12 | each |
|---|
| 61 | 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in- charge. Concealed work, including cutting chases and making good the wall etc.\n(a) Exposed or in trenches\n(i) 15mm OD | Item61 | 50 | Rm |
|---|
| 62 | 45.1 | (ii) 25mm OD | Item62 | 30 | Rm |
|---|
| 63 | 46 | Supplying fitting and fixing C.P bib cock 15mm dia of approved brand directed and specified (G.I & CP pipes will be measured separately)\n(a) Long body bib cock with wall flange | Item63 | 5 | each |
|---|
| 64 | 47 | Supplying fitting and fixing chrome plated (C.P) stop cock of approved brand and size as mentioned below As directed and specified (G.I & C.P pipes will be measured and paid separately)\n(a) 15mm dia Male/Female (long thread) | Item64 | 5 | each |
|---|
| 65 | 48 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I Make as specified and directed.\n(a) 25 mm dia | Item65 | 2 | each |
|---|
| 66 | 49 | Providing fitting & fixing C.I. Grating to the floors complete as directed and specified.\n(a) 75 mm dia | Item66 | 5 | each |
|---|
| 67 | 50 | Supplying, fitting, fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished)\n(a) Mortice Locks vertical type \n(i) 100mm (Godrej with handle-6 lever) | Item67 | 11 | Each |
|---|
| 68 | 51 | Supplying and Placing plastic cylindrical vertical closed top (PCVC) tank of Sintex /Polycon/Patton make over the stagging with manhole cover with loking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes.\n(a) 1000 litre capacity | Item68 | 2 | Each |
|---|
| 69 | 52 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | Item69 | 6.75 | m2 |
|---|
| 70 | 53 | 18 mm thick marble stone slab in flooring including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slabs of specified quality and shade at all levels.\nMarwat Slab | Item70 | 39.98 | m2 |
|---|
