| 1 | 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. | BI01010001010000000000000515BI0100001112 | 630 | Sqm |
|---|
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (All kinds of soil). | BI01010001010000000000000515BI0100001113 | 309.564 | Cum |
|---|
| 3 | 3 | Filling available excavated earth ( excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m (All kinds of soil) . | BI01010001010000000000000515BI0100001114 | 258.438 | Cum |
|---|
| 4 | 4 | Banking excavated earth in layers not exceeding 20 cm. in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m. | BI01010001010000000000000515BI0100001115 | 150 | Cum |
|---|
| 5 | 5 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. | BI01010001010000000000000515BI0100001116 | 63.055 | Cum |
|---|
| 6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level. 1 : 4 : 8 ( 1 Cement : 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size). | BI01010001010000000000000515BI0100001117 | 63.055 | Cum |
|---|
| 7 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level. 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001118 | 4.719 | Cum |
|---|
| 8 | 8 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement (All work upto P.L). 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001119 | 47.997 | Cum |
|---|
| 9 | 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. In plinth and skirting courses, fillets, columns, pillars, posts and struts. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001120 | 11.286 | Cum |
|---|
| 10 | 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement. RCC work in suspended floors, roofs having slope upto 15° landings, balconies, shelves and chajjas. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001121 | 51.978 | Cum |
|---|
| 11 | 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement. RCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001122 | 23.015 | Cum |
|---|
| 12 | 12 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level (Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars). | BI01010001010000000000000515BI0100001123 | 16973.4 | Kg |
|---|
| 13 | 13.01 | Centering shuttering including struttings, propping etc. and removal of form work for : (a) Foundations, footings, bases for columns etc. for mass concrete with timber plank : | BI01010001010000000000000515BI0100001124 | 249.12 | Sqm |
|---|
| 14 | 13.02 | (b) Suspended floors, roofs, landings, balconies and access platform with timber planks :- | BI01010001010000000000000515BI0100001125 | 560.88 | Sqm |
|---|
| 15 | 13.03 | (c) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank :- | BI01010001010000000000000515BI0100001126 | 259.09 | Sqm |
|---|
| 16 | 13.04 | (d) Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply :- | BI01010001010000000000000515BI0100001127 | 150.48 | Sqm |
|---|
| 17 | 14 | First class brick work in foundation and plinth including cost of all materials as required complete in cement mortar 1 : 4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001128 | 85.104 | Cum |
|---|
| 18 | 15 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete in cement mortar 1:4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001129 | 158.3 | Sqm |
|---|
| 19 | 16 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete in cement mortar 1:4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001130 | 377.38 | Sqm |
|---|
| 20 | 17 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete (Fixed to steel windows by welding). | BI01010001010000000000000515BI0100001131 | 1060.92 | Kg |
|---|
| 21 | 18 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required. | BI01010001010000000000000515BI0100001132 | 25.92 | Sqm |
|---|
| 22 | 19 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001133 | 212.04 | Kg |
|---|
| 23 | 20 | 12 mm cement plaster of mix in cement mortar 1 : 4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001134 | 775.39 | Sqm |
|---|
| 24 | 21 | 15 mm cement plaster on the rough side of single or half brick wall of mix in cement mortar 1 : 4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001135 | 447.84 | Sqm |
|---|
| 25 | 22 | 6 mm cement plaster of mix in cement mortar 1 : 3 ( 1 cement : 3 fine sand ). | BI01010001010000000000000515BI0100001136 | 733.02 | Sqm |
|---|
| 26 | 23 | Neat cement punning. | BI01010001010000000000000515BI0100001137 | 625.49 | Sqm |
|---|
| 27 | 24 | Distempering with 1st quality acrylic washable distemper (ready mixed) of approved brand and manufacture and of required shade and colour complete as per manufacurer's specification on new work ( two or more coats ). [Payment shall be made after submission of Test Certificate issued by the Manufacturer]. | BI01010001010000000000000515BI0100001138 | 499.71 | Sqm |
|---|
| 28 | 25 | Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface complete. | BI01010001010000000000000515BI0100001139 | 624.42 | Sqm |
|---|
| 29 | 26 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 3.84 kg/10 sqm) complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]. | BI01010001010000000000000515BI0100001140 | 624.42 | Sqm |
|---|
| 30 | 27 | Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]. | BI01010001010000000000000515BI0100001141 | 111.51 | Sqm |
|---|
| 31 | 28 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete (40 mm). | BI01010001010000000000000515BI0100001142 | 209.3 | Sqm |
|---|
| 32 | 29 | Providing and laying flat brick flooring in cement mortar including cement slurry etc. complete in cement mortar 1 : 4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001143 | 77.4 | Sqm |
|---|
| 33 | 30 | Providing and laying dry flat brick flooring in required pattern complete | BI01010001010000000000000515BI0100001144 | 375 | Sqm |
|---|
| 34 | 31 | Providing and laying 1st quality ceramic glazed floor tiles of approved size conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades as approved by Engineer-in-charge over 20 mm thick bed of cement mortar 1 : 4 (1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. Ceramic Glazed Tiles 1st quality 600 x 600mm in all shades and designs. | BI01010001010000000000000515BI0100001145 | 42.3 | Sqm |
|---|
| 35 | 32 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001146 | 78.12 | Sqm |
|---|
| 36 | 33 | Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below (tolerance +/- 1mm) with wall thickness 2.0mm+/- 02mm. corners of the door frame to be jointed with galvanized brackets and stainless screws, joint mitred and plastic wilded. The hinge side vertical of the frames reinforced by galvanized MS tube of size 19 × 19 mm and 1 mm +/- 0.1 mm wall thickness and 3 nos stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-In-Charge. Extruded section Profile size 48x40 mm. | BI01010001010000000000000515BI0100001147 | 29.7 | Mtr |
|---|
| 37 | 34 | 30mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC profile section of size 30mm x 60mm and wall thickness 2mm ± 0.2mm with inbuilt decorative moulding edging on one side. The styles and rails with plastic brackets of size 75×220 mm mitred and welded at the corners. The styles of the shutter reinforced by inserting galvanised MS tube of size 25×20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of \"H\" Section, a UPVC profile section of size 30×100 mm and 2 mm ± 0.2 mm wall thickness welded to the shutter style with a UPVC profile section single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm ± 0.1 mm wall thickness with 20 mm panel beading of suitable size/Glass (4 mm thick plain glass)/ louver section, louver frame of suitable size, complete as per manufacturer's specification and direction of Engineer-In-Charge. (for W.C. and Bathroom door shutter). | BI01010001010000000000000515BI0100001148 | 9.45 | Sqm |
|---|
| 38 | 35.01 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall. (a) 15 mm dia. nominal bore. | BI01010001010000000000000515BI0100001149 | 90 | Mtr |
|---|
| 39 | 35.02 | (b) 25 mm dia. nominal bore. | | 95 | Mtr |
|---|
| 40 | 36 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc (External work). [25 mm dia. nominal bore]. | BI01010001010000000000000515BI0100001150 | 56 | Mtr |
|---|
| 41 | 37 | Providing and fixing brass bib cock of approved quality (15 mm dia. nominal bore). | BI01010001010000000000000515BI0100001151 | 36 | No |
|---|
| 42 | 38 | Providing and fixing brass stop cock of approved quality (15 mm nominal bore). | BI01010001010000000000000515BI0100001152 | 12 | No |
|---|
| 43 | 39 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (Single socketed pipe - 110 mm OD). | BI01010001010000000000000515BI0100001153 | 120 | Mtr |
|---|
| 44 | 40.01 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (a) Bend 87.5° (110 mm). | BI01010001010000000000000515BI0100001154 | 40 | No |
|---|
| 45 | 40.02 | (b) Single equal tee without door (110x110x110mm). | BI01010001010000000000000515BI0100001155 | 8 | No |
|---|
| 46 | 41 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete (110 mm). | BI01010001010000000000000515BI0100001156 | 100 | No |
|---|
| 47 | 42 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | BI01010001010000000000000515BI0100001157 | 2500 | Ltr |
|---|
| 48 | 43.01 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required (25 mm nominal bore). (a) 15 mm dia. nominal bore. | BI01010001010000000000000515BI0100001158 | 4 | No |
|---|
| 49 | 43.02 | (b) 25 mm dia. nominal bore. | BI01010001010000000000000515BI0100001159 | 16 | No |
|---|
| 50 | 44 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long, weighing not less than 440gms. | BI01010001010000000000000515BI0100001160 | 6 | No |
|---|
| 51 | 45 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85gms. | BI01010001010000000000000515BI0100001161 | 4 | No |
|---|
| 52 | 46 | Constructing masonry Chamber 30x30x50 cm, inside , in brick work in cement mortar 1 : 4 (1 cement : 4 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1 :2 : 4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design with Second Class bricks. | BI01010001010000000000000515BI0100001162 | 2 | No |
|---|
| 53 | 47 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. | BI01010001010000000000000515BI0100001163 | 6 | No |
|---|
| 54 | 48 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. | BI01010001010000000000000515BI0100001164 | 2 | No |
|---|
| 55 | 49 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001165 | 2 | No |
|---|
| 56 | 50 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. | BI01010001010000000000000515BI0100001166 | 2 | No |
|---|
| 57 | 51 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively. | BI01010001010000000000000515BI0100001167 | 4 | No |
|---|
| 58 | 52 | Constructing soak pit 1.20 x 1.20 x 1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. | BI01010001010000000000000515BI0100001168 | 2 | No |
|---|
| 59 | 53 | Construction of Barak bamboo scaffolding for drilling & lowering of the tube well including cutting a tank 2.00 m x 2.00 m x 0.90 m size in drilling & cutting the two tank with 0.30 m width of 10.15 mm deep drain. | BI01010001010000000000000515BI0100001169 | 1 | Job |
|---|
| 60 | 54 | Drilling & boring of pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags, samples bags and disposal of excess soil and mud including the cost for water etc. as required to maintain the pilot hole properly as per specification & direction of the Engg. - in - charge. | BI01010001010000000000000515BI0100001170 | 90 | Mtr |
|---|
| 61 | 55 | Reaming the pilot hole to an enlarged bore hole in any soil strata by manual means and disposal of excess soil and mud including the cost for water etc. as required to maintain the bore hole properly as per specification & direction of the Engg. - in - charge (From 100 mm dia. pilot hole to 250 mm bore hole). | BI01010001010000000000000515BI0100001171 | 87 | Mtr |
|---|
| 62 | 56.01 | Providing & lowering of UPVC pipe as per IS : 12818 after washig the bore hole by manual means as per specification & direction of the Engg. - in - charge. (a) CM Casing pipe 150 mm dia. nominal bore. | BI01010001010000000000000515BI0100001172 | 36 | Mtr |
|---|
| 63 | 56.02 | (b) CM Casing pipe 100 mm dia. nominal bore. | BI01010001010000000000000515BI0100001173 | 27 | Mtr |
|---|
| 64 | 56.03 | (c) RS pipe 150 mm dia. nominal bore. | BI01010001010000000000000515BI0100001174 | 33 | Mtr |
|---|
| 65 | 57 | Development and washing the tube well by using air compressor (diesel operated) until sand free clear water is available as per direction of the Engg. - in - charge. | BI01010001010000000000000515BI0100001175 | 1 | Job |
|---|
| 66 | 58 | Providing & shrouding of deep tube well assembly with washed peagravels (2.00 - 4.75 mm effective size) as per specification (IS : 4097) and direction of the Engg. - in - charge. | BI01010001010000000000000515BI0100001176 | 3.5 | Cum |
|---|
| 67 | 59 | Providing, fitting, fixing, lowering, positioning & resting of submersible pump having capacity of 2000 GPH, 40 mtr. Head with suitable single phase 3 HP submersible motor including 40 mm dia. 30 mtr. Long (medium class) PVC assembly column pipe assembly with adopter plastic coated safety rope along with 4 nos. safety clamp delivery bend 90 degree etc. as per direction of the Engg. - in - charge. | BI01010001010000000000000515BI0100001177 | 1 | Job |
|---|
| 68 | 60 | Supplying, fitting, fixing of MS (18 SWG) KIOSK (size 1200 mm length, 450 mm width, 450 mm height) fitted four side slope roof fitted with 4 nos. support of 40 x 40 x 6 mm thick MS angle, 1.00 mtr. Length from the top level of concrete base embedded in 1 : 2 : 4 cement concrete base (size 300 x 300 x 600 mm) with proper locking arrangement and coated with anti corrosive paint (both inside and outside) including necessary provision for fitting, fixing of single phase motor starter unit, main switch, energy meter etc. complete in all respect as per direction of the Engg. - in - charge. | BI01010001010000000000000515BI0100001178 | 1 | Job |
|---|
| 69 | 61 | Supplying, fitting, fixing of single phase motor starter unit for 3 HP submersible pump set (with 2 pole contractor, Running capacitor 50 + 50 MFD, starter capacitor 200/250 MFD, 1 no. overload relay 18 - 25 A adjustable type, voltmeter (0 - 300 V), Amps meter (0 - 150 A), 1 no. 25 Amps On/Off switch, 1 no. indicating lamp etc. of same brand of supplied pumps / C & S / BCH / L & T make including necessary electricting wiring in the KIOSK and G.I. Pipe earthing etc. complete as per direction of the Engg. - in - charge. | BI01010001010000000000000515BI0100001179 | 1 | Job |
|---|
| 70 | 62 | Providing and fixing of UPVC reducer suitable for UPVC 'CM'casing or 'CS' casing or 'RS' pipes as per specification and as per direction of the Engg. - in - charge (150 x 100 mm dia.). | BI01010001010000000000000515BI0100001180 | 1 | No |
|---|
| 71 | 63 | Providing and fixing of UPVC bail plug suitable for 113 mm outer dia. UPVC pipes as per direction of the Engg. - in - charge. | BI01010001010000000000000515BI0100001181 | 1 | No |
|---|
| 72 | 64 | Providing and fixing of gun metal non return Valve (screwed end) conforming to IS : 778 as per chapter 20 of CPWD specification & direction of the Engg. - in - charge. | BI01010001010000000000000515BI0100001182 | 1 | Job |
|---|
| 73 | 65 | Providing and fixing of safety clamp with submersible pump set as per direction of the Engg. - in - charge. | BI01010001010000000000000515BI0100001183 | 1 | No |
|---|
| 74 | 66 | Providing and fixing of housing clamp (made with 12 mm thick MS sheet) by welding with blind pipe including applying of anti-corrosive bitumastic paint as per specification (IS : 2800 - Part - I) as per direction of the Engg. - in - charge (150 mm dia.). | BI01010001010000000000000515BI0100001184 | 1 | No |
|---|
| 75 | 67 | Providing and fixing of UPVC end cap suitable for UPVC 'CM'casing or 'CS' casing or 'RS' pipes as per specification and as per direction of the Engg. - in - charge (150 mm dia.). | BI01010001010000000000000515BI0100001185 | 1 | No |
|---|
| 76 | 68 | Extension of electric service connection with providing 30 m length of LT Line including providing and fixing GI pipe of 40 mm dia. Tata medium class of 3 m length fitted in the CC Block 1 : 2 : 4 of 300 x 300 x 500 mm as per direction of the Engg. - in - charge. | BI01010001010000000000000515BI0100001186 | 1 | Job |
|---|
| 77 | 69 | Trail run & commissioning of the scheme in all respect as per direction of the Engg. - in - charge. | BI01010001010000000000000515BI0100001187 | 1 | Job |
|---|