}

Provision Of Electronic Interlocking System Including Outdoor Works At Stations Pokla, Pakra, Kurkura And Interlocking Of Lc Gate Alongwith Phase Wise Modification In Connection With The Doubling Work Between Hatia-Orga Section In Ranchi Division Of South-Jharkhand

South Eastern Railways-SER has published Provision Of Electronic Interlocking System Including Outdoor Works At Stations Pokla, Pakra, Kurkura And Interlocking Of Lc Gate Alongwith Phase Wise Modification In Connection With The Doubling Work Between Hatia-Orga Section In Ranchi Division Of South. Submission Date for this Tender is 13-01-2020. Railway Signaling Systems Tenders in Jharkhand. Bidders can get complete Tender details and download the document.




Tender Notice

22835870
Provision Of Electronic Interlocking System Including Outdoor Works At Stations Pokla, Pakra, Kurkura And Interlocking Of Lc Gate Alongwith Phase Wise Modification In Connection With The Doubling Work Between Hatia-Orga Section In Ranchi Division Of South
Open Tender
Indian
Jharkhand
13-01-2020

Tender Details

Provision Of Electronic Interlocking System Including Outdoor Works At Stations Pokla, Pakra, Kurkura And Interlocking Of Lc Gate Alongwith Phase Wise Modification In Connection With The Doubling Work Between Hatia-Orga Section In Ranchi Division Of South Eastern Railway.

Key Value

Document Fees
INR 10000 /-
EMD
INR 1104100.0 /-
Tender Value
INR 19.08 Crore /-

BOQ Items

0 1 2 3 4 5 6 7 8 9
0 S.No. Item\rCode Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding\rUnit
1 Schedule A1-Execution of Signalling SOR Items 16768527.96 Above/\rBelow/Par
2 1 1 30.00 Numbers 5000.00 150000.00 224.40 486600.00
3 Item Description:- Transportation and installation (including over hauling) of electric point machines on MS plate\rfixedonwooden/PSC/steelsleeperscompletewithfixingofanti-theftBelt,crankhandlekeyInterlocking\rarrangement as per the drawing approved by Railways,junction boxes with 1 1/2'' dia telescopic G.I. pipe of\rrequired length up to point machine, ground connections, including smithy works involved, insulation of MS plate\ron which the point machine is to be fixed from the gauge tie plate, involving revetting/welding of angle cleats,\rtermination of cables, wiring, preliminary adjustment for operation of point by crank handle and subsequent final\radjustment, painting and lettering as required, testing and commissioning of the same. NOTE: All the materials\rrequired for installation, wiring, testing and commissioning of electric point machine other than the point machine\rand those materials included in material supply Schedule-B will have to be supplied by the contractor. These\rsundry materials such as MS plate/ flats/ angle cleats, GI , bolts and nuts, washers and screws, eyelets of sizes,\rPVC bunching tape and buttons, numbered ferrules, hylum sheets, welding materials, rivets, MS angle of sizes,\rAnti theft cover, Cable fixing clamps with nuts & bolts, locks for crank handle interlocking arrangement, paints,\rcement, sand etc. and other such material as required shall be provided by the contractor. This also includes\rshifting of detectors and carrying out any other pre NI adjustments as specified by Railway representative. This\ralso includes supply and transportation of one good quality lock and one twenty pages register for record of\rmaintenance for each Point machine.
4 2 1 15.00 Numbers 550.00 8250.00 224.40 26763.00
5 Item Description:- Transportation and installation of Rotary key transmitter on 12mm thick hylum sheet. including\rterminationofcables,wiringasperdrawing,paintingandlettering.NOTE: Allthematerialsrequiredfor\rinstallation, wiring, testing and commissioning of rotary key transmitter other than those materials included in\rmaterial supply Schedule-B will have to be supplied by the contractor. These sundry materials such as 25mm\rthick teak wood boards, transparent sheet for box, locking arrangement. 2 nos. of 6 lever locks for box and 1 No.\rlock for front transparent sheet of Godrej or similar make and anti tilting arrangement, nuts, bolts, washers and\rscrews of sizes points, eyelets of sizes, PVC pipe size, bunching PVC tape and buttons numbered ferrules,\rwelding materials, cement, sand, varnish, etc., and other such sundry materials required for the work, will be\rsupplied by the contractor.
6 1 30.00 Numbers 1800.00 54000.00 224.40 175176.00
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail