| 1 | 1 | B&R PORTION:-\nTaking down chowkats or frames with shutter w/o taking off shutter from the frame n.exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) all as specified and directed. | | 24 | Each |
|---|
| 2 | 2 | Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm but n.exc 4 sqm each incl cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) all as specified and directed. | | 6 | Each |
|---|
| 3 | 3 | Dismanting asbestos cement (corrugated or semi-corrugated etc) sheets in roof covering, complete all as specified and directed. | | 425 | Square Metre |
|---|
| 4 | 4 | Dismantling timber scantling 40 sq cm and over in section framed work of any description, complete all as specified and directed. | | 4.5 | Cubic Metre |
|---|
| 5 | 5 | Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr, complete all as specified and directed. | | 15 | Cubic Metre |
|---|
| 6 | 6 | Demolition of cement concrete (unreinforced) in ground floors and paving's n.exc 15 cm thickness (below or above ground level) and removing unserviceable material exc 100 mtr complete all as specified and directed. | | 21 | Cubic Metre |
|---|
| 7 | 7 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including racking out joints hacking for key scrubbing with water etc complete all as specified and directed. | | 454 | Square Metre |
|---|
| 8 | 8 | Brick work with sub class 'B' brick straight or curved on plan exc 6 m mean radius build in CM 1:6 complete all as specified and directed. | | 12 | Cubic Metre |
|---|
| 9 | 9 | Description all as per Ser No 08 above but except bricks. | | 7 | Cubic Metre |
|---|
| 10 | 10 | Pressed steel frames for door (Factory made) out of 1.25 mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete, size of frame 125x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3 mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate including one shop coat of red oxide primer, complete all as specified and directed. | | 31 | Running Metre |
|---|
| 11 | 11 | 35 mm thick 2nd class hard wood plain framed, panelled shutter (two panel) of factory made with lock rail and panel of 12 mm thick veneered particle board with commercial veneering on both faces including wooden beads on both sides. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. | | 14 | Square Metre |
|---|
| 12 | 12 | 35 mm thick 2nd class hard wood factory made glazed and Skelton shutters open rebated and prepared to receive glass/wire gauge etc. without sash bar but with lock rail edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/wire mesh etc sizes of member as per clause 8.20(a) of SSR part -I for door shutter complete all as specified. | | 14 | Square Metre |
|---|
| 13 | 13 | Steel window 1.25 mm thick Box type (Primer coated) ERW hollow P section of size 60 x 25 mm single rebated comprises glazed skelton shutter ERW sec 50 x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60 x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication and fixing arrangement as per drg No CEPZ/TD-324,325/07 , complete all as specified. | | 26 | Square Metre |
|---|
| 14 | 14 | Steel window 1.25 mm thick Box type (Primer coated) ERW hollow P section of size 60 x 25 mm single rebated comprises wire gauged skelton shutter ERW sec 50 x 20 mm and 1 mm thick with two Nos of FI section complete welded to frame for holding wire mesh with one vertical mullion of ERW box type T-section of size 60 x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication and fixing arrangement as per drg No CEPZ/TD-324,325/07, complete all as specified. | | 26 | Square Metre |
|---|
| 15 | 15 | Mild Steel work of flat iron, square bar, round bar etc. as in framed work such as grills, guard bars, gratings, etc. including bending, cutting and welding as necessary of confirming to Fe 290-0 Gde-E-165 including one shop coat of red oxide primer, complete all as specified. | | 240 | Kilogram |
|---|
| 16 | 16 | PCC 1:2:4 type B1 using (20 mm graded crushed stone aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and directed. \nNote : From work required for these item included in the unit rate of this item. | | 1.4 | Cubic Metre |
|---|
| 17 | 17 | 3 mm thick sheet glass ordinary quality glazing with steel pins, oil putty to steel windows and beads nails etc. to wooden surfaces as in square exc 0.50 sqm in each pane, complete all as specified. | | 21 | Square Metre |
|---|
| 18 | 18 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n exc 22.5cm long, Diameter of neck 16mm to 20mm Conforming to IS, complete all as specified. | | 30 | Kilogram |
|---|
| 19 | 19 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. | | 425 | Square Metre |
|---|
| 20 | 20 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. | | 36 | Square Metre |
|---|
| 21 | 21 | Rendering 15 mm thick cement plaster in cement mortar (1:6) on other than fair face of brick work or stone surfaces of wall and finished the surface even and smooth without using extra cement all as specified.\nNote:-All necessary scaffolding, lifting arrangement if required at site shall be inclussived in the quoted rate by the contractor. | | 212 | Square Metre |
|---|
| 22 | 22 | Rendering 15 mm thick cement plaster in cement mortar (1:4) on fair face of brick work or concrete surfaces of wall and finished the surface even and smooth without using extra cement all as specified.\nNote:-All necessary scaffolding, lifting arrangement if required at site shall be inclussived in the quoted rate by the contractor. | | 242 | Square Metre |
|---|
| 23 | 23 | Two coat of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated wooden surfaces of any description, over 10cm width or girth, complete, all as specified and directed. | | 14 | Square Metre |
|---|
| 24 | 24 | Two coats of oil bound distemper over a coat of alkaly primer to newly plastered surface of wall with & including preparation of surfaces with wall putty 1-3mm thick, complete all as specified and directed. | | 212 | Square Metre |
|---|
| 25 | 25 | Prepration of old treated plastered surface of wall and applying two coats of oil bound distemper over a coat of alkaly primer to old treated plastered surface of wall with & including preparation of surfaces with wall putty 1-3mm thick, complete all as specified and directed. | | 212 | Square Metre |
|---|
| 26 | 26 | GI section frame work (powder coated) for fixing of white, pre-primed, self embossed, reinforced designer board, grid consisting of perimeter wall angle 19mmX19mmX0.45mm, cross 'Tee' 28.6mm (web)X 24mm flange 0.33mm thick powdered coated main tee 38mm (Web) X24mm flange 0.33mm thick. Wall angle shall be screwed/ fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm C/C , then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm C/C to soffits. To from grid of 610X610mm cross Tee shall be provided @ 610mm C/C in both directions and all suitable provisions shall be made for fixing the recessed/surface mounting light fittings if any, complete all as specified and directed by Engr-in-Charge.\nNote:- Boarding shall be measured & paid seperately. | | 287 | Sqm |
|---|
| 27 | 27 | 4 mm thick non asbestos fibre cement building boards 60 x 60 cm in size including two coat of white wash after preparation of surface, fixed/laid/ inserted to GI framework at ceiling with screws complete all as specified and directed. | | 287 | Square Metre |
|---|
| 28 | 28 | Structural steel works of Fe 410W (Gde E 250) quality A, as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including painted one shop coat of zinc chromate/red oxide primer paint (including preparation of surface) before fabrication, complete all as specified. | | 4590 | Kilogram |
|---|
| 29 | 29 | Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, complete all as specified. | | 405 | Kilogram |
|---|
| 30 | 30 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n exc 30cm long, Diameter of neck 16mm to 20mm Conforming to IS, complete all as specified. | | 67.5 | Kilogram |
|---|
| 31 | 31 | Two coat of synthetic enamel paint any tint after preparation of newly primed steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint, complete all as specified and directed. | | 270 | Square Metre |
|---|
| 32 | 32 | Dismantling boarding any description fixed in any position with nail complete all as specified and directed. | | 287 | Square Metre |
|---|
| 33 | 33 | Machine cut kota stone slab flooring 18-20 mm thick laid over and including cement screed base 20 mm thick in cement mortar 1:6, over and including 25 mm thick PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and polishing to granite finish over complete all as specified and directed. | | 328 | Square Metre |
|---|
| 34 | 34 | Machine cut kota stone slab 18-20 mm thick as in riser of steps, skirting, dado and pillar laid over and including rendering of 15 mm thick in cement morter 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and polishing to granite finish complete all as specified and directed. | | 21 | Square Metre |
|---|
| 35 | 35 | 75 mm thick PCC 1:3:6, type C2, using 40 mm graded crushed stone aggregate as in plinth protection etc., finished even and fair, complete all as specified and directed. | | 112 | Square Metre |
|---|
| 36 | 36 | Two coat of cement based paint over & including a coat of approved primer including preparation to newly plastered surfaces of walls, complete all as specified and directed by Engr-in-Charge. | | 242 | Square Metre |
|---|
| 37 | 37 | Preparation of old treated plastered surfaces of wall including filling of small holes etc. and applying two coats of cement based paint, complete all as specified and directed by Engr-in-Charge. | | 230 | Square Metre |
|---|
| 38 | 38 | MS PVC caoted drapery rods of 25 mm dia complete with coloured conical end balls at both end, dia not less then 50mm and fitted with and including MS PVC sheeted / power coated bracket size 150mm made to shape or 75mm dia PVC/PVC coated coloured end wall to wall round block made to shape in male and female pieces as required at site fixed in repairs, complete all as specified and directed by Engr-in-Charge. | | 48 | Running Metre |
|---|
| 39 | 39 | Mild steel work of angle iron as in framed work such as cooler stand, grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; conforming to Fe.290.Gde-E-165 with & including a coat of red ixde primer, complete all as specified and directed. | | 576 | Kilogram |
|---|
| 40 | 40 | Cutting holes into or through brick wall built in cement morter, superficial area n.exc 150 sq.cm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required, complete all as specified and directed by Engr-in-Charge. | | 8 | Per CMD |
|---|
| 41 | 41 | Reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span ,as in lintel band, complete all as specified and directed. | | 6.6 | Cubic Metre |
|---|
| 42 | 42 | Use and waste of formwork to edges of concrete flats , treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls , horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for rough finished surfaces complete all as specified and as directed by the Engineer in Charge | | 90 | Running Metre |
|---|
| 43 | 43 | TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified. | | 450 | Kilogram |
|---|
| 44 | 44 | Description all as per Item No-43 above but 5mm dia and over upto and incl 10 mm dia as in binders,stirrups,spacer, complete all as specified. | | 300 | Kilogram |
|---|
| 45 | 45 | E&M PORTION:-\nTaking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed. | | 126 | Per Point |
|---|
| 46 | 46 | Taking down carefully unsv main switch / DBs alongwith MCBs / wooden board / connected fittings & fixtures any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed.\nNote:-Old serviceable switches & MCB shall be taken on charge by the MES for reuse and unsv fittings shall be credited to the contractor. | | 3 | Each |
|---|
| 47 | 47 | Taking down unsv cable of any size laid in trenches / floor or fixed to wall etc, complete all as specified and as directed. | | 100 | Running Metre |
|---|
| 48 | 48 | Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc for one light/fan/bell point controlled by one, one way switch including cutting chases and making good to disturbed surfaces of wall / ceiling / floor including treating with existing finishes, complete all as specified and as directed. | | 90 | Per Point |
|---|
| 49 | 49 | Description all as per srl item No-48 above but for 3 pin 5 Amps on same board with cable 1.5Sqmm size, all as specified and directed | | 6 | Per Point |
|---|
| 50 | 50 | Description all as per srl item No-48 here-in before but for one 3 pin socket outlet 6 amp independent complete all as specified. | | 30 | Per Point |
|---|
| 51 | 51 | Socket outlet multipurpose combination 2 in 1, 5 pin 6Amp flush type universal, complete all as specifed. | | 36 | Each |
|---|
| 52 | 52 | Fan regulator stepped type (electronic ) flush type for 1200/1400mm sweep AC ceiling fan, complete all as specified. . | | 30 | Each |
|---|
| 53 | 53 | Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. | | 30 | Each |
|---|
| 54 | 54 | LED lamp 9W, complete all as specified and directed.\nMake:- Crompton Cat Part No LED 9W - B22 - CDL or Equivalent cat part of make as specified in Appx 'F' here in after. | | 30 | Each |
|---|
| 55 | 55 | Switch piano flush type 6 Amp single pole two way, (ISI marked), complete all as specified. | | 126 | Each |
|---|
| 56 | 56 | Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified. Make:- Legrand cat part No-5076 21 or Equivalent cat part of make as specified in Appx 'F' here in after.\n | | 3 | Each |
|---|
| 57 | 57 | Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, compete all as specified. | | 60 | Each |
|---|
| 58 | 58 | Tube light fitting box type suitable for LED 18-20W tube Rod with end cap made out of CRCA sheet powder coated complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 18-20LED tube rod 4 feet long complete all as specified and directed. Make:-Crompton Cat Part No:-LTT8-20 for LED tube rod & DMLN1LT8-16 for fittings or Equivalent cat part of make as specified in Appx 'F' here in after.\nNote :- The LED batten and LED tube rod shall be of same make. | | 30 | Each |
|---|
| 59 | 59 | MCB single pole and neutral 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand Cat Part No 4086 09 to 4086 17 or Equivalent cat part of make as specified in Appx 'F' here in after. | | 3 | Each |
|---|
| 60 | 60 | MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand cat part No-4085 87 to 4085 95 or Equivalent cat part of make as specified in Appx 'F' here in after. | | 18 | Each |
|---|
| 61 | 61 | PVC flat twin core cable aluminium conductor of size 16sqmm, complete all as specified. | | 100 | Running Metre |
|---|
| 62 | 62 | Supply and fixing 'NEXUS+' LED Street lighting 45W Aesthetically designed roadway luminiare with excellent thermal management with high power LEDs as light source including electronic driver 45W LED 6000K. MAKE :- CROMPTON cat part No LSTP-45-CDL and equivalent make of Philips/Wipro/Helonix. | | 3 | Each |
|---|
