| 1 | 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimming\nthe sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. | BI01010001010000000000000515BI0100001112 | | |
|---|
| 2 | 1.01 | (a) Depth of excavation not exceeding 1,500 mm. | BI01010001010000000000000515BI0100001113 | 1.512 | Cum |
|---|
| 3 | 2 | (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)\n | | 0.504 | cum |
|---|
| 4 | 3 | Dismantalling artificial stone flooring ….. | | 13.86 | sqm |
|---|
| 5 | 4 | Add extra for work at 1st floor | | 2.8 | sqm |
|---|
| 6 | 5 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame\nexluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should\nbe correted upto three decimals).- Neem | | 0.1912 | Cum |
|---|
| 7 | 6 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.- 32 mm thick shutters (single leaf) | | 9.225 | sqm |
|---|
| 8 | 7 | 125 mm. thick brick work with 1st class\nbricks in cement mortar (1:4) in First floor. | | 2.475 | sqm |
|---|
| 9 | 8 | Cement concrete with graded stone ballast mm size excluding shuttering)\nIn ground floor\n(A) [Pakur Variety] | | | |
|---|
| 10 | 8.01 | (a) 1:3:6 proportion | | 0.378 | Cum |
|---|
| 11 | 9 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.\n | | 260.952 | Sqm |
|---|
| 12 | 10 | plastering work ….15 mm thick plaster With 1:6 cement mortar (1st floor) | | 144.948 | Sqm |
|---|
| 13 | 11 | 15 mm thick plaster With 1:6 cement mortar ( Ground Floor) | | 148.242 | Sqm |
|---|
| 14 | 12 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately)- Upto area 2.5 Sq.m | | 7.875 | sqm |
|---|
| 15 | 13 | Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface\nis exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the\nEngineer - in - Charge. | | 69.09 | sqm |
|---|
| 16 | 14 | Cutting chase upto 125 x 150 mm. and subseque ,… (a) in brick wall [Cement-3.6 Kg/Mtr] | | 54.2 | sqm |
|---|
| 17 | 15 | b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4\ncementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required) | | 83.995 | sqm |
|---|
| 18 | 16 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6 mm\nnominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(pakur varity | | 6.198 | cum |
|---|
| 19 | 17 | 250 mm thick Brick work with 1st class bricks in cement mortar (1:6) (a)In foundation and plinth | | 1.8 | cum |
|---|
| 20 | 18 | Extra rate for using water proofing and plasticising admixture @ 0.2% by\nweight of cement (or at manufacturer's specified rate) for concrete of various | | 37.19 | kg |
|---|
| 21 | 19 | Supplying, fitting and fixing in position fibre glass panes of approved quality with resin, nail, clip etc. as per IS:12866-1989. (In all floors for\ninternal wall & upto 6 m height for external wall)- 3.0 mm thick (5.10 Kg/Sq.m) | | 13.62 | Sqm |
|---|
| 22 | 20 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,railing etc. fitted and fixed with necessary screws and lugs in 1st floor.- Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. | | 0.8505 | qntl |
|---|
| 23 | 21 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. _in Ground Floor (One Coat) | | 125.078 | Sqm |
|---|
| 24 | 22 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. _1st Floor (One coat) | | 200.881 | Sqm |
|---|
| 25 | 23 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat)-Premium 100% Acrylic Emulsion | | 125.078 | Sqm |
|---|
| 26 | 24 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. IIn first Floor | | 200.881 | Sqm |
|---|
| 27 | 25 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats\n | | 513.68 | Sqm |
|---|
| 28 | 26 | (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | | 34.7 | Sqm |
|---|
| 29 | 27 | ((b) On steel or other metal surface Two coats (with any shade except white) | | 34.7 | Sqm |
|---|
| 30 | 28 | a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | | 24.7 | Sqm |
|---|
| 31 | 29 | (Painting ….(b) On timber surface Two coats (with any shade except white) | | 24.7 | Sqm |
|---|
| 32 | 30 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. .- 32 mm thick\n | | 4.095 | Sqm |
|---|
| 33 | 31 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria..-66mm x 70mm\n | | 14.1 | Mtr |
|---|
| 34 | 32 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. …...manufacturer's specification and direction of Engineer-in-Charge | | | |
|---|
| 35 | 32.01 | With Polymerised Adhesive [6 mm thick] & epoxy grouting materials for filling joints including spacer-2 mm in Ground floor- Light Colour | | 51.124 | Sqm |
|---|
| 36 | 33 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. …..With Polymerised Adhesive [6 mm thick] & epoxy grouting materials for filling joints including spacer-2 mm in1st floor- Light Colour | | 42.244 | Sqm |
|---|
| 37 | 34 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc- (A) Floor- With Polymerised Adhesive and Epoxy grout pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface- Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick] Other than Coloured decorative including white ground floor | | 11.443 | Sqm |
|---|
| 38 | 35 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors….(B) Wall -With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.- Area of each tile upto 0.09 Sq.m- Other than Coloured decorative including white- In ground floor | | 49.905 | Sqm |
|---|
| 39 | 36 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc- (A) Floor- With Polymerised Adhesive and Epoxy grout pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface- Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick] Other than Coloured decorative including white1std floor | | 24.625 | Sqm |
|---|
| 40 | 37 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors….(B) Wall -With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.- Area of each tile above 0.09 Sq.m- Other than Coloured decorative including white- In 1st floor | | 30.346 | Sqm |
|---|
| 41 | 38 | Add for Sanitary Plumbing works | | 1 | Each |
|---|
| 42 | 39 | FOR INTERNAL ELECTRIFICATION WORKS | | 1 | Each |
|---|
| 43 | 40 | Printing & Fixing IEC materials … as directed | | 1 | Each |
|---|
| 44 | 41 | for GST & Labour Welfare Cess | BI01010001010000000000000515BI0100001129 | 1 | For the work |
|---|
