Indian Oil Corporation Limited-IOCL has published Waterproofing Work Of Station Building , Replacement Of Old Asbestos Sheets , Providing Structural Steel Shed And Miscellaneous Civil Works At Nrpl Sangrur. Submission Date for this Tender is 16-12-2019. Shed Construction Tenders in NRPL SANGRUR Punjab. Bidders can get complete Tender details and download the document.
| Name of Work: Waterproofing work of station building, replacement of old asbestos sheets, providing structural steel shed and miscellaneous civil works at NRPL Sangrur | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 10 | Waterproofing, Asbestos sheet & Misc. | 1 | ||
| 2 | 10.01 | Earth work in excavation by mechanical means (hydraulic excavator)/Manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan, including dressing of sides and ramming of bottom, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavted soil as directed, within a lead of 50 m : All kind of Soils | Item 10.10 | 35 | CUM |
| 3 | 10.02 | Providing & laying in position Plain Cement Concrete (PCC) of specified grades excluding cost of centering and shuttering : 1:4:8 (1 cement : 4 coarse sand (Zone-III): 8 graded stone aggregate 40 mm nominal size.) | Item 10.20 | 210 | CUM |
| 4 | 10.03 | Centering and Shuttering including strutting,propping etc. and removal of form work for foundation, footings and bases of columns. | Item 10.30 | 85 | SQM |
| 5 | 10.04 | Providing & laying in position Reinforced Cement Concrete (RCC) of specified grades excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III): 3 graded stone aggregate 20 mm nominal size.) | Item 10.40 | 7 | CUM |
| 6 | 10.05 | Steel reinforcement for RCC Work including cutting,bending, placing in position and binding all complete up to plinth level : Thermo mechanically treated bars of of grade Fe-500D or more | Item 10.50 | 650 | KG |
| 7 | 10.06 | Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, claddings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cutting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including preparation of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of concrete work). | Item 10.60 | 3.5 | TO |
| 8 | 10.07 | Providing 12 mm cement plaster of mix : 1:4 (1 cement : 4 fine sand) | Item 10.70 | 20 | SQM |
| 9 | 10.08 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of the Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations.] Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) | Item 10.80 | 25 | CUM |
| 10 | 10.09 | Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated 'J' or 'L' hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/sq.m. | Item 10.90 | 450 | SQM |
| 11 | 10.1 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated 'J' or 'L' hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : 0.80 mm thick with zinc coating not less than 275 gm/sq.m. | Item 10.100 | 20 | M |
| 12 | 10.11 | Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated 'J' or 'L' hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : 1.60 mm thick with zinc coating not less than 350 gm/sq.m. | Item 10.110 | 40 | M |
| 13 | 10.12 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead : Asbestos Sheet | Item 10.120 | 310 | SQM |
| 14 | 10.13 | Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvaturen(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer-in-Charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | Item 10.130 | 240 | KG |
| 15 | 10.14 | Providing and fixing approved quality venetian blinds including all fixtures, fastenings, pelmet etc. with all labour, materials in required sizes complete. | Item 10.140 | 23 | SQM |
| 16 | 10.15 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 3.0 Kms lead as per direction of the Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations.] In cement mortar | Item 10.150 | 20 | CUM |
| 17 | 10.16 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps with overlapping of 100 mm at joints. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete =. The vital physical and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. (b) Tear strength in longitudinal and transverse direction as 300/250N. (c) Softening point of membrane not less than 150°C. (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3.0 mm thick | Item 10.160 | 1460 | SQM |
| 18 | 10.17 | Providing and laying Plain Cement Concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | Item 10.170 | 23 | CUM |
| 19 | 10.18 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) | Item 10.180 | 20 | CUM |
| 20 | 10.19 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase | Item 10.190 | 340 | M |
| 21 | 10.2 | Providing 12 mm cement plaster on walls or flooring including raking out the joint over the brickwork, stone masonry or concrete surface with scaffolding,neeru finish,curing all complete. 1:6 (1 cement : 6 fine sand) | Item 10.200 | 340 | SQM |
| 22 | 10.21 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade and colour. Two or more coats over one coat of cement primer | Item 10.210 | 620 | SQM |
| 23 | 10.22 | Scrapping & removing old water proofing treatment including damaged thermocole base and removing the debris upto a distance of 3 Km as directed. | Item 10.220 | 1460 | SQM |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
