Submersible Pump-Assam

Supply Of Submersible Pump, Supply, Testing & Handing Over Of 12.5 Hp Submersible Pump Suitable For 3 Phase, Having Discharge 600-1800 (Lpm) & Head: Minimum:22 Meter, Maximum:49 Meter. Make: Ksb/Shakti/Crompton/Kirloskar Or Similar, Supply, Testing And Handing Over Of Powder Coated Ip-54 Control Panel For 12.5 Hp Submersible Pump. The Control Panel Must Be Fabricated With 16 Swg Sheet Steel Dust And Vermin Proof Enclosure Duly Wired With Pvc Insulated Wire Confirming To Is:694. It Shall Be Of Wall Mounting Type With Locking Arrangement & To Be Incorporated With Automatic Star Delta Starter, With Electronic Single Phase Preventer, Inbuilt Electronic Star Delta Timer & Inbuilt Arc-Quenching Panel Of Suitable Rating. It Should Also Have Time-Switch, Auto/Manual Switch For Auto Start Of Pump With Time Delay Of 0.1S - 3 Min & Voltmeter Of 500 V. The Unit Should Guard The Pump Against Single Phasing, Overload, Dry-Run, Stalling, Locked Rotor, Short Circuit, Earth Fault,Phase Unbalance & Phase Sequence Reversal Protection, Alert Function With Electronic Motor Protection Relay. Make Should Be Of Shree Shakti/C&S/Schneider Make:Make C&S (Be3-Spsddx204#321-Hm)/ Schneider/Shree Shakti Suraksha Kawach/Havells Or Similar, Supply Of 80Mm Dia Heavy Gauge Gi Pipe With Flange Wended On Both Ends Of 3 Mtr. Long Including Fixing Of Necessary Nits, Bolts & Gasket. Make: Tata/Jindal/Bansal/Nezone Or Similar., Supply Of Heavy Gauge Gi Flange Of 80Mm Dia Both Side Welded With Gi Pipe As Direction Eic At Site. Make: Tata/Jindal/Bansal/Nezone Or Similar., Supply Of Both Side Flange Gi Bend Of 80Mm Dia With Gi Pipe. Make: Tata/Jindal/Bansal/Nezone Or Similar., Supply Of Ci Non Return Valve Suitable For 80 Mm Dia Gi Pipe.Make: Tata/Jindal/Bansal/Nezone Or Similar., Supply Of Stop Valve (Brass Body) Suitable For 80 Mm Dia Gi Pipe. Make: Tata/Jindal/Bansal/Nezone Or Similar., Supply Of Supporting Multistrand Steel Rope 10 Mm Dia With Necessary Gi, U-Clamps, Nuts, Bolts Etc. As Per Direction Of Eic Site. Make: Tata/Jindal/Bansal/Nezone Or Similar., Supply Of Ms Supporting Clamp Made Of Ms Flat Size- 100 X 6 Mm Of Suitable Size For Supporting Of Pump As Per Direction Of Eic At Site. Make: Tata/Jindal/Bansal/Nezone Or Similar., Supply, Of Testing & Handing Over Of 1100 Volt Grade 3 Core, 6 Sq.Mm Pvc Insulated And Sheathed Submersible Flat Cable With Copper Conductor Conforming To Is: 694/1990 For Submersible Pump Including Cable Boxing. Make: Havells/Kei/Richa Or Similar., Supply Of Safety Steel Rope For Safety Of 12.5 Pump . Make: Tata/Jindal/Bansal/Nezone Or Similar., Supply Of Cock Sheet For Flange Connection For Water Leakage Protection Of 12.5 Hp Submersible Pump., Supply Of Water Tape For Cable Joint., Supply Of 80 Mm Gi Clamp For Holding Pump At Ground. Make: Tata/Jindal/Bansal/Nezone Or Similar., Supply Of 80 Mm Dia Gi Bend For Water Through At Required Places. Make: Tata/Jindal/Bansal/Nezone Or Similar., Supply Of 4 Inch Gi Nut Bolt With Proper Washer Arrangement For Pipe Joint. Make: Tata/Jindal/Bansal/Nezone Or Similar.

Refer document

INR 15910.0 /-

Refer document