Reconstruction Renovation Of Old Psychiatry Ward Near Diesel Tank At Ihbas, Executive Engineer (Civil) Ihbas, Dilshad Garden-Delhi

TDR : 22697407

Tender Notice
BOQ

Expired

Executive Engineer (Civil) Ihbas, Dilshad Garden , Delhi

Tender Brief : Reconstruction Renovation Of Old Psychiatry Ward Near Diesel Tank At Ihbas

Document Fees
Refer document

EMD
₹ 137655.0 /-

Tender Value
₹ 68.82 Lakhs /-

Submission Date
10-12-2019

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Reconstruction/Renovation of Old Psychiatry Ward near Diesel tank at IHBAS
1	1	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\n1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)	38	cum
2	2	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:\n1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)	2	cum
3	3	Centering and shuttering including strutting, propping etc. and removal of form for:
4	3.01	Suspended floors, roofs, landings, balconies and access platform	350	sqm
5	3.02	Lintels, beams, plinth beams, girders, bressumers and cantilevers	190	sqm
6	3.03	Edges of slabs and breaks in floors and walls\nUnder 20 cm wide	125	metre
7	3.04	Weather shade, Chajjas, corbels etc., including edges	45	sqm
8	3.05	Columns, Pillars, Piers, Abutments, Posts and Struts	32	sqm
9	4	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.\nThermo-Mechanically Treated bars	1625	Kg
10	5	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.\nThermo-Mechanically Treated bars	7500	Kg
11	6	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:\nCement mortar 1:6 (1 cement : 6 coarse sand)	4	cum
12	7	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :\nCement mortar 1:6 (1 cement : 6 coarse sand)	125	cum
13	8	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.\nCement mortar 1:4 (1 cement :4 coarse sand)	45	sqm
14	9	Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.	38	sqm
15	10	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:\n35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws	9	sqm
16	11	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :\na) 300x16 mm	5	each
17	12	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
18	12.01	250x10 mm	7	each
19	12.02	150x10 mm	375	each
20	13	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :\n125 mm	195	each
21	14	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.\nTwin rubber stopper	8	each
22	15	Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
23	15.01	Raj Nagar plain	200	sqm
24	15.02	Udaipur green marble	88	sqm
25	16	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.	288	sqm
26	17	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.	18	sqm
27	18	12 mm cement plaster of mix :\n1:6 (1 cement: 6 coarse sand)	375	sqm
28	19	15 mm cement plaster on rough side of single or half brick wall of mix:\n1:6 (1 cement: 6 coarse sand)	175	sqm
29	20	6 mm cement plaster of mix :\n1:3 (1 cement : 3 fine sand)	500	sqm
30	21	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :\nNew work (two or more coats) over and including water thinnable priming coat with cement primer	875	sqm
31	22	Finishing walls with Acrylic Smooth exterior paint of required shade :\nNew work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)	175	sqm
32	23	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.	1050	sqm
33	24	Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.	88	cum
34	25	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.\nNominal concrete 1:3:6 or richer mix (i/c equivalent design mix)	20	cum
35	26	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.\nIn cement mortar	150	cum
36	27	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.\nFor thickness of tiles above 25 mm and up to 40 mm	130	sqm
37	28	Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.	5	sqm
38	29	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :\nOf area 3 sq. metres and below	31	each
39	30	Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.	400	sqm
40	31	Demolishing mud phaska in terracing and disposal of material within 50 metres lead.	63	cum
41	32	Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :\n100 mm dia pipe	22	metre
42	33	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
43	33.01	15 mm to 40 mm nominal bore	108	metre
44	33.02	Above 40 mm nominal bore	19	metre
45	34	Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.	4	each
46	35	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.	358	cum
47	36	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:\nWhite Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests	2	each
48	37	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :\nW.C. pan with ISI marked white solid plastic seat and lid	2	each
49	38	Providing and fixing one piece construction white vitreous china squatting plat with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required :\nRange of two squatting plates with 5 litre P.V.C. automatic flushing cistern	1	each
50	39	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:\nWhite Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap	4	each
51	40	Providing and fixing soil, waste and vent pipes :\n100 mm dia\nCentrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989	35	metre
52	41	Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :\nFor 100 mm dia pipe	4	each
53	42	Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.\n100 mm dia\nSand cast iron S&S as per IS - 3989	4	each
54	43	Providing and fixing plain bend of required degree.\n100 mm dia\nSand cast iron S&S as per IS : 3989	2	each
55	44	Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes: \n100 mm	18	each
56	45	Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :\n100 mm inlet and 100 mm outlet\nSand cast iron S&S as per IS: 3989	12	each
57	46	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.\nConcealed work, including cutting chases and making good the walls etc.
58	46.01	20 mm nominal outer dia Pipes	17	metre
59	46.02	25 mm nominal outer dia Pipes	50	metre
60	47	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n25 mm nominal bore	1	each
61	48	Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :\n25 mm nominal bore	1	each
62	49	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.	3000	per litre
63	50	Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.\n15 mm nominal bore	1	each
64	51	Providing and fixing PTMT stop cock of approved quality and colour.\n15 mm nominal bore, 86 mm long, weighing not less than 88 gms	13	each
65	52	Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.\n15 mm nominal bore with 45 cm length	9	each
66	53	Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.\n25mm nominal bore, weighing not less than 62 gms	3	each
67	54	Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:\n100x100 mm size P type\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5	3	each
68	55	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :\nInside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5	5	each
69	56	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
70	56.01	For fixed portion\nPowder coated aluminium (minimum thickness of powder coating 50 micron)	325	kg
71	56.02	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)\nPowder coated aluminium (minimum thickness of powder coating 50 micron)	350	kg
72	57	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:\na) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.\nb) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.\n
73	57.01	c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.\nd) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.\ne) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.\nAll above operations to be done in order and as directed and specified by the Engineer-in-Charge :\nWith average thickness of 120 mm and minimum thickness at khurra as 65 mm.	325	sqm
74	58	Providing and fixing stainless steel grating of approved quality .\n100 mm nominal dia	10	each
75	59	Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge.
76	59.01	(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately)\nAll works above plinth level upto floor V level	62	cum
77	60	Providing and fixing pre-polished precast concrete designer tiles 10mm thick extra heavy duty of approved brand and manufacturer (Ultra tile/omaxe or equivalent) of required shape & size over a bed of average thickness of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) laying and jointing with cement slurry @ 3.3. kg per sqm including pointing the joints with ready mixed pointing material complete in all respect as per directions of Engineer-in-charge.	225	Sqm.
78	61	Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as\nper direction of Engineer-in-charge.	70	metre
79	62	Providing and fixing ISI marked cupboard shutters of 18mm thick conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains:
80	62.01	18mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.	8	sqm
81	63	Providing and fixing 18mm thick board partition of approved quality non decorativetype core of block board construction with frame of 1st class hard wood and well matched commercial 3ply veneering with vertical grain or cross band and face veneer on both face of partition i/c nails etc.all complete.	20	sqm
82	64	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :\n150x10 mm	50	each
83	65	Providing and fixing chromium plated brass handles with necessary screws etc. complete:\n125 mm	22.5	each
84	66	Providing and fixing magnetic catcher of aproved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.\nDouble strip (horizontal type)	28	each
85	67	Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete :\n115 mm	23	each
86	68	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.\n1.0 mm thick	50	sqm
87	69	Providing & fixing 6mm thick commerical ply of ISI marked in cupboard shutters with screws and nails complete as per direction of engineer-in-charge.\n6mm thick commerical plywood	8	sqm
88	70	Providing and Fixing PVC edge tape of size 25mm thick on edge of non-decorative board etc. complete as per direction of Engineer-in-charge.	75	Rmtr.
89	71	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.	3	cum
90	72	Welding by gas or electric plant including transportation of plant at site etc. complete.	2500	cm
91	73	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :\n1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)	15	cum
92	74	Supply and Filling good earth i/c stacking and consolidation all complete at site as per direction of Engineer-in-Charge	30	cum
93	75	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.	30	cum
94	76	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone\naggregate 20 mm nominal size).	3	cum
95	77	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	225	kg
96	78	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.\nRaj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab upto 0.50 sqm	11	sqm
97	79	Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia	53	metre
98	80	S/f/f CPVC consealed stop. Cock 20mm dia etc all complete job.	2	each
99	81	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
100	81.01	150 mm dia. R.C.C. pipe	18	metre
101	81.02	250 mm dia. R.C.C. pipe	35	metre
102	82	Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5	4.5	each
103	83	Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.	18	sqm
104	84	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominalbore	15	each
105	85	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :\n15 mm nominal bore	3.75	each
106	86	Providing and fixing C.P. brass bib cock/two way of parko make or equivalent to kingston etc. complete as per direction of Engineer-in-charge	1	each
107	87	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.\nFlexiblepipe 32 mm dia	8	each
108	88	Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms	2	each
109	89	providing and fixing PTMT shower arm 225mm with flange etc as per direction of Eng-in-Charge.	2	each
110	90	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
111	90.01	32 mm nominal outer dia Pipes	57	metre
112	90.02	40 mm nominal outer dia Pipes	43	metre
113	91	Providing and fixing CPVC gate valve of approved quality including all materials and labour etc. required proper complete of the work as per direction of Eng-in-Charge.
114	91.01	32 mm nominal outer dia	7	each
115	91.02	40 mm nominal outer dia	0.75	each
116	92	Providing and fixing CPVC union 32mm dia in CPVC pipes in including cutting and jointing the pipe including excavation , refilling the earth or cutting of wall and making ground the same complete wherever required as per direction of Eng-in-Charge	3.25	each
117	93	Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.	65	metre
118	94	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :\nTwo or more coats on new work	30	sqm
119	95	Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady] the frame.	38	metre
120	96	Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.	10	sqm
121	97	Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm	1	each
122	98	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm	1	each
123	99	Debit of dismantled items/materials at site.
124	99.01	Old reinforcement window grills	12500	kg
125	99.02	Old doors and windows	7	nos.
126	99.03	Old Bricks	20000	Per \n1000 nos.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Delhi Tenders

Construction Tenders

Building Construction Tenders

Building Repair Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Reconstruction Renovation Of Old Psychiatry Ward Near Diesel Tank At Ihbas, Executive Engineer (Civil) Ihbas, Dilshad Garden-Delhi

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Reconstruction Renovation Of Old Psychiatry Ward Near Diesel Tank At Ihbas, Executive Engineer (Civil) Ihbas, Dilshad Garden-Delhi

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us