Assam Rifles-AR has published Provision For Enhancement Of Life Of 02 Nos Type I Qtrs Bldg No . Dt/Sf/551/86 In 01 Block By Repairing Of Roof , False Ceiling , Joineries , Flooring , Repair Of Plaster , Plinth Protection With Drain And Periodical Services At Saramati Line Of No. Submission Date for this Tender is 09-12-2019. Building Repair Tenders in Dimapur, Nagaland Nagaland. Bidders can get complete Tender details and download the document.
| Name of Work : Provision for enhancement of life of 02 Nos Type - I qtrs ( Bldg No. DT/SF/551/86) in 01 block by repairing of roof, false ceiling, Joineries, flooring , repair of plaster, plinth protection with drain and periodical services at Saramati line of No.2 Trg Bn at ARTC & S, Dimapur (Nagaland). | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | SCHEDULE ‘A’ PART- I ( REPAIR OF BUILDING ) | |||
| 2 | 1.01 | Dismantling of old plaster or skirting raking out joints and cleaning the surface for plaster incl disposal of rubbish to the dumping ground within 50 mtr lead. | item1 | 177.52 | Sqm |
| 3 | 1.02 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under incl cutting the patch in proper shape, racking out joints and plastering the surface of the walls, including disposal of rubbish to the dumping ground within 50m lead etc. complete with CM 1:4( 1 cement : 4 coarse sand). | item2 | 177.52 | Sqm |
| 4 | 1.03 | Demolishing of brick work manually/by mechanically means including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead as per direction of E - I – C. | item3 | 3.59 | Cum |
| 5 | 1.04 | Half brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level in Cement mortar 1:4 (1 cement : 4 coarse sand). | item4 | 20.72 | Sqm |
| 6 | 1.05 | Providing and laying 15 mm cement plaster on rough side of single or half brick wall of cement of mix 1:4 (1 cement : 4 coarse sand) | item5 | 49.11 | Sqm |
| 7 | 1.06 | Providing and laying for RCC work in lintel beams and Cooking platform with concrete mix (1:11/2:3) with graded 20mm stone aggregates, excluding the cost of reinforcement and centering, shuttering etc complete). | item6 | 0.61 | Cum |
| 8 | 1.07 | Providing and fixing in position of reinforcement (TMT bar), incl cutting to length, bent to shape required including cranking, bending etc complete. | item7 | 67.47 | Kg |
| 9 | 1.08 | Centering and shuttering incl strutting, propping etc and removal of form for slab. | item8 | 5.77 | Sqm |
| 10 | 1.09 | Providing and fixing 12.5mm thick square edge Gypsum tile of size 595x595mm, made of Gypsum plasterboard and fixed in true horizontal level , suspended on interlocking metal grid of hot dipped galvanized steel section, consisting of main T runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick ( minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm centre to centre to form a grid of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in grid including required cutting/making, opening for services etc complete. Main T runner to be suspended from ceiling using GI slotted cleats od size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4 mm GI adjustable wire etc all complete with white colour tiles. | item9 | 76.4 | Sqm |
| 11 | 1.1 | Dismantling cement asbestos sheets or other hard board in ceiling, including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead. | item10 | 76.4 | Sqm |
| 12 | 1.11 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 m span and 5 m height including stacking the material within 50 m lead. | item11 | 0.81 | Cum |
| 13 | 1.12 | Fixing of PPGI Sheet to existing truss or purlings as a free for fixing with J or L hook or using self drilling or self tapping screws etc complete. | item12 | 133.59 | Sqm |
| 14 | 1.13 | Providing and fixing PPGI sheet ridges or hips of width (500- 600mm) overall width plain sheet of 0.50 mm (+0.05%) total thickness , zinc coating fixed 120grms per sqm as per IS :277 using self drilling or self tapping screws complete. | item13 | 14.18 | Rm |
| 15 | 1.14 | Dismantling roofing of Asbestos Sheet including ridges, hips, valleys and gutters etc., and stacking the material within 50 m. | item14 | 133.59 | Sqm |
| 16 | 1.15 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 m lead nominal concrete 1:3:6 or richer mix in floor. | item15 | 3.06 | Cum |
| 17 | 1.16 | Providing and laying ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer) of approved make, in all colours and shades, laid on 20 mm thick CM (1:4), including grouting the joints with white cement etc. complete. | item16 | 70.24 | Sqm |
| 18 | 1.17 | Providing and laying non skid ceramic floor tiles of size 300x300mm ( thickness to be specified by the manufacturer) of approved make, in all colours and shades except white, Ivory, Grey laid on 20mm thick CM 1:4 (1cement :4 coarse sand), incl grouting the joints with white cement and matching pigments. etc. complete. | item17 | 5.88 | Sqm |
| 19 | 1.18 | Providing and laying of ceramic glazed wall tiles of size 200x300mm of approved make in all colours of any size in walls/skirting or dados over 12 mm thick bed of CM (1:3) and jointing with grey cement slurry @ 3.3 kg per sqm incl pointing the joints with white cement complete. | item18 | 27.12 | Sqm |
| 20 | 1.19 | Providing and fixing of marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 pointing with white cement mortar 1:2 with an admixture of pigment to match the marble shade to the backing by means of cramps, which shall be paid for separately ( Raj Nagar Plain white marble or Udaipur green marble). | item19 | 5.09 | Sqm |
| 21 | 1.2 | Half brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure in plinth level in Cement mortar 1:4 (1 cement : 4 coarse sand). | item20 | 35.16 | Sqm |
| 22 | 1.21 | Providing and laying 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand) | item21 | 64.47 | Sqm |
| 23 | 1.22 | Providing and laying in position cement concrete of 1:3:6 with 20 mm graded stone aggregates including centering and shuttering etc complete in drain. | item22 | 2.37 | Cum |
| 24 | 1.23 | Providing and making plinth protection 50 mm thick of cement concrete (1:3:6) with stone aggr 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. | item23 | 21.8 | Sqm |
| 25 | 1.24 | Providing and finishing with two or more coats applied @ 1.43 ltr/10 Sqm over existing cement paint surface Premium Acrylic smooth exterior paint with silicon additives of required shade including removing of old water proofing cement paint by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete. | item24 | 149.55 | Sqm |
| 26 | 1.25 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer , over the plastered wall surface to prepare the surface even and smooth complete. | item25 | 251.65 | Sqm |
| 27 | 1.26 | Distempering with oil bound washable distemper approved brand and manufacturer to given an even shad in old work (one or more coats) incl preparation of old surface by removing old paint by scrapping, sand papering incl necessary repairs to scratches etc complete. | item26 | 344.64 | Sqm |
| 28 | 1.27 | Providing and Painting two or more coats with synthetic enamel paint of approved brand and manufacture to give an even shade. | item27 | 71.22 | Sqm |
| 29 | 1.28 | Steel work in built up tubular round sections for truss and wall cladding including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.with hot finished seamless type tubes. | item28 | 382.47 | Kg |
| 30 | 1.29 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in door frame and guard bars. | item29 | 154.6 | Kg |
| 31 | 1.3 | Providing and fixing factory made steel glazed windows and ventilators , side/top/centre hung , with beading and all members such FD7,F4B,K11B etc, including providing and fining hinges, pivots, including priming coat of approved steel primer of fixing with 15x3mm lugs 10cm long embedded in cement concrete block 15x10x10cm of cement concrete (1:3:6). | item30 | 349.81 | Kg |
| 32 | 1.31 | Providing and fixing fly proof wire gauge to windows, doors and ventilators with MS flat 15x3mm and nuts & bolts complete stainless steel ( grade 304) wire gauge of 0.5mm dia wire and 1.4mm aperture on both sides. | item31 | 8.64 | Sqm |
| 33 | 1.32 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows and ventilators all complete with 4mm thick glass panes. | item32 | 8.64 | Sqm |
| 34 | 1.33 | Providing and fixing 35mm thick factory made laminated flush door shutters decorative type, core of block boards construction with frame of 1st class hard wood including stainless steel butt hinges with screws etc complete. | item33 | 25.2 | Sqm |
| 35 | 1.34 | Dismantling doors shutters including chowkhats, holdfasts etc complete of area 3 sqm and below. | item34 | 14 | Each |
| 36 | 1.35 | Providing and fixing of mosquito proof shutters using galvanized MS wire gauge of average width of aperture 1.4mm in both directions with wire of dia 0.63mm for door of 35mm with 2nd class teak wood. | item35 | 7.56 | Sqm |
| 37 | 1.36 | Providing and fixing aluminum handles of size : 100 mm, transparent or dyed to required colour or shade, with necessary screws etc. complete | item36 | 14 | Each |
| 38 | 1.37 | Providing and fixing aluminium tower bolts of size : 100x10 mm with necessary screws etc. Complete. | item37 | 14 | Each |
| 39 | 1.38 | Supply and fixing aluminum sliding door bolts, transparent or dyed to required colour or shade, with nuts and screws etc complete of size 250x16mm. | item38 | 4 | Each |
| 40 | 1.39 | Providing and fixing of curtain rods of 1.25mm thick chromium plated brass plate , with two chromium plated brass brackets fixed with CP brass screws and wooden plugs etc, wherever necessary complete of size 20mm dia. | item39 | 28.8 | Rm |
| 41 | 2.01 | SCHEDULE ‘A’ PART - II (INTERNAL ELECTRIFICATIONS) Rewiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 and 1.5 sq.mm. FR PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit with modular switch , modular plate, suitable GI box and earthing the point with 1.5 sqmm FR PVC insulated copper conductor single core cable including dismantling as required\n | item40 | 28 | Point |
| 42 | 2.02 | Supply and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | item41 | 4 | Each |
| 43 | 2.03 | Supply and fixing 5/6 amps switch piano type on the existing switch box/ cover including connections etc. as required. | item42 | 28 | Each |
| 44 | 2.04 | Supply and fixing 15/16 amps switch piano type on the existing switch box/ cover including connections etc. as required. | item43 | 4 | Each |
| 45 | 2.05 | Supply and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. | item44 | 12 | Each |
| 46 | 2.06 | Supply and fixing brass batten/ angle holder including connection etc. as required. | item45 | 16 | Each |
| 47 | 2.07 | Providing and fixing 63 Amp TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. | item46 | 1 | Each |
| 48 | 2.08 | Supply and fixing 2 + 4 way, Single door (SP) and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) | item47 | 2 | Each |
| 49 | 2.09 | Supply and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc. as reqd of 16amp. | item48 | 2 | Each |
| 50 | 2.1 | Supply and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.of 5amp. | item49 | 8 | Each |
| 51 | 2.11 | Supply and fixing 3 pin 5/6 amp socket outlet piano type on the existing switch box/ cover including connections etc. as required. | item50 | 6 | Each |
| 52 | 2.12 | Supply and fixing 3 pin 15/16 amp socket outlet piano type on the existing switch box/ cover including connections etc. as required. | item51 | 4 | Each |
| 53 | 2.13 | Wiring of circuit/ submain wiring along with earth wire with FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required of 2 x 2.5 sqmm + 1 x 2.5 sq mm earth wire. | item52 | 20 | Rm |
| 54 | 2.14 | Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pippe of 2.7 metre long etc. (but without charcoal/ coke and salt) as required. | item53 | 1 | Job |
| 55 | 2.15 | Switch fuse disconnector unit TPN, 32 Amps, 415 volts. | item54 | 1 | Each |
| 56 | 2.16 | Wiring for for light/power plug with 4x4sqmm FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit along with 2 Nos 4sqmm FR PVC insulated copper conductor single core cable for loop earthing as required | item55 | 20 | Rm |
| 57 | 2.17 | Supply and laying earth connector from earth electrode with 6 SWG dia GI wire in 15mm dia GI pipe from earth electrode including connection with GI thimble excavation and re filling as reqd. | item56 | 12 | Rm |
| 58 | 2.18 | Fixing of tube light set in existing point including screws, nut, bolts etc complete. | item57 | 6 | Each |
| 59 | 3.01 | SCHEDULE ‘A’ PART - III (PLUMBING AND SANITARY WORKS) Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink without drain board of size : (610 x 460 mm) bowl depth 200 mm as per IS : 13983 with C.I. Brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.\n | item58 | 2 | Each |
| 60 | 3.02 | Providing and fixing 32 mm dia flexible P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. | item59 | 4 | Each |
| 61 | 3.03 | Providing and fixing water closet squatting pan ( Indian type WC pan) with 100mm sand cast iron P or S trap, 10 ltr P.V.C low level flushing cistern (white) with manually controlled device (handle lever) and flush pipe with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. ( Orissa pattern WC pan size 580x440mm with integral type foot rests) (Make - Hindware/Paryware/Hindustan) | item60 | 2 | Each |
| 62 | 3.04 | Providing and fixing 20 mm dia nominal bore G.I. Pipes complete with G.I. Fittings and clamps, i/c cutting and making good the walls etc. | item61 | 20 | Rm |
| 63 | 3.05 | Ditto but 15mm dia. | item62 | 8 | Rm |
| 64 | 3.06 | Providing and fixing 25 mm dia nominal bore G.I. Pipes complete with G.I. Fittings including trenching and refilling etc. | item63 | 24 | Rm |
| 65 | 3.07 | Providing and fixing of 15mm nominal bore CP bib cock of approved quality. | item64 | 6 | Each |
| 66 | 3.08 | Providing and fixing of 20 mm dia brass stop cock of approved quality etc. Complete. | item65 | 2 | Each |
| 67 | 3.09 | Providing and fixing of 15 mm nominal bore stop cock CP of approved quality. | item66 | 2 | Each |
| 68 | 3.1 | Providing and fixing of PTMT towel rail ring trapezoidal shape 215mm long, 200mm wide with minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality of 600mm long. | item67 | 2 | Each |
| 69 | 3.11 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | item68 | 2 | Each |
| 70 | 3.12 | Providing and fixing white vitreous pedestal type china wash hand basin (Size 630x450 mm) incl pedestal with C.I. Brackets, 15 mm C.P Brass pillar taps, 32 mm C.P. Brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required etc. complete. | item69 | 2 | Each |
| 71 | 3.13 | Providing and fixing 600x450mm beveled edge mirror of superior glass ( of approved quality) complete with 6 mm thick hard board backing fixed to wooden cleats with CP brass screws and washers complete.. | item70 | 2 | Each |
| 72 | 3.14 | Providing and fixing on wall unplasticised rigid PVC pipes incl jointing with seal ring, single socketed pipes of 100 mm dia. | item71 | 22 | Rm |
| 73 | 3.15 | Providing and fixing on wall unplasticised rigid PVC pipes incl jointing with seal ring, single socketed pipes of 75 mm dia. | item72 | 16 | Rm |
| 74 | 3.16 | Construction of brick masonry manhole in cement mortar (1:4) with RCC top slap with (1:2:4) mix foundation concrete (1:4:8) mix inside plastering 12 mm thick with CM (1:3) finished with floating coat of neat cement and making channel in cement concrete (1:2:4) etc complete with common burnt clay FPS (non modular) bricks. | item73 | 2 | Each |
| 75 | 3.17 | Providing and fixing of 15mm nominal bore CP angle cock of approved quality. | item75 | 6 | Each |
| 76 | 3.18 | Providing and fixing of 15mm nominal bore connection pipe of approved quality. | item76 | 2 | Each |
| 77 | 3.19 | Providing and fixing of 100mm dia CP brass shower rose with 15 or 20mm inlet of approved quality. | item77 | 2 | Each |
| 78 | 3.2 | Providing and fixing 20 mm dia brass stop cock of approved quality etc complete. | item79 | 2 | Each |
| 79 | 3.21 | Supply and fixing of stainless steel plate rack of approved quality (TP) incl fittings etc. complete. (FD-242/TP) Ser No. : 216 of Area rate list 2017-18. | item80 | 2 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
