| 1 | 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in all kinds of soil. | BI01010001010000000000000515BI0100001113 | 58.38 | Cum |
|---|
| 2 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed (including all lead, lift & carriages). | BI01010001010000000000000515BI0100001114 | 12.75 | Cum |
|---|
| 3 | 3 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) (including all lead, lift & carriages). | BI01010001010000000000000515BI0100001115 | 14.76 | Cum |
|---|
| 4 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) crushed (including all lead, lift & carriages). | BI01010001010000000000000515BI0100001116 | 20.25 | Cum |
|---|
| 5 | 5 | Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) & Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) (including all lead, lift & carriages). | BI01010001010000000000000515BI0100001117 | 15.85 | Cum |
|---|
| 6 | 6 | Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand) & Extra for half Brick masonry in superstructure above plinth level upto floor V level (including all lead, lift & carriages). | BI01010001010000000000000515BI0100001118 | 17.55 | Sqm |
|---|
| 7 | 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) (including all lead, lift & carriages). | BI01010001010000000000000515BI0100001119 | 2.86 | Cum |
|---|
| 8 | 8 | Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level (including all lead, lift & carriages). | BI01010001010000000000000515BI0100001120 | 17.05 | Cum |
|---|
| 9 | 9 | Reinforcement for RCC work including straightening cutting, bending, placing in position & binding all complete with TMT bars. | BI01010001010000000000000515BI0100001121 | 3143 | Kg |
|---|
| 10 | 10 | Centring and Shuttering including strutting, propping etc and removal of form work for Foundations: footings, bases of columns etc. for mass concrete. | BI01010001010000000000000515BI0100001122 | 99.58 | Sqm |
|---|
| 11 | 11 | Centring and Shuttering including strutting, propping etc and removal of form work for Suspended floors, roofs, landings, balconies and access platform. | BI01010001010000000000000515BI0100001123 | 74.78 | Sqm |
|---|
| 12 | 12 | Centring and Shuttering including strutting, propping etc and removal of form work for Lintels, beams, plinth beams, girders, bressumers and centilevers. | BI01010001010000000000000515BI0100001125 | 40.69 | Sqm |
|---|
| 13 | 13 | Centring and Shuttering including strutting, propping etc and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts. | BI01010001010000000000000515BI0100001126 | 36.3 | Sqm |
|---|
| 14 | 14 | Centring and Shuttering including strutting, propping etc and removal of form work for Edges of Slabs and Break in floors and walls (under 20 cms wide) | BI01010001010000000000000515BI0100001127 | 38.4 | Mtr |
|---|
| 15 | 15 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel of 1.25mm/1.60mm thickness including hinges jamb, lock, jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm/1.60mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile A:- Sheet of 1.25mm thickness and base ties of 1.25mm. | | 52.42 | Mtr |
|---|
| 16 | 16 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete fixed to steel windows by welding. | | 165 | Kg |
|---|
| 17 | 17 | 6 mm Cement plaster to ceiling of mix 1 : 3 ( 1 cement : 3 fine sand) (including all lead, lift & carriages). | | 83.26 | Sqm |
|---|
| 18 | 18 | 12mm cement plaster of mix 1:6 (1 cement : 6 fine sand) (including all lead, lift & carriages). | | 96.28 | Sqm |
|---|
| 19 | 19 | 15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) (including all lead, lift & carriages). | | 111.92 | Sqm |
|---|
| 20 | 20 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm. | | 66.23 | Sqm |
|---|
| 21 | 21 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge). 35mm Thick Second class deodar wood. | | 4.22 | Sqm |
|---|
| 22 | 22 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Decorative ply wood both side decorative veneer (type 1) conformiong to IS 1328 BWR type | | 3.19 | Sqm |
|---|
| 23 | 23 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm thick First class kail wood | | 8.71 | Sqm |
|---|
| 24 | 24 | Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 250x16 mm | | 1 | No |
|---|
| 25 | 25 | Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 200x10 mm | | 2 | Nos |
|---|
| 26 | 26 | Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10 mm | | 48 | No |
|---|
| 27 | 27 | Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm | | 25 | No |
|---|
| 28 | 28 | Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm | | 2 | Nos |
|---|
| 29 | 29 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work | | 19.07 | Sqm |
|---|
| 30 | 30 | Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade/ colour complete as per manufacturer's specifications Two or more coats on new work | | 156.97 | Sqm |
|---|
| 31 | 31 | Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm\n | | 114.15 | Sqm |
|---|
| 32 | 32 | Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed (including all lead, lift & carriages).\n | | 16.72 | Sqm |
|---|
| 33 | 33 | Providing & fixing electric points complete in all respect as per necessary as site. | | 12 | Nos |
|---|
