Indian Navy-IN has published Supply Of Hull Defect List/ Work Package - Sr 19M , Hull Cleaning, Hull Survey, 004 Steel Renewals, Build Ups, Sea Tube ,Draught Marks ,Sacrificial Anodes, Surface Preparation, Painting, Air Pressure Testing , 028 Bilge Platform Plate ,Key Fender , Bulwar. Submission Date for this Tender is 12-12-2019. Screws Tenders in NAVAL DOCKYARD VISAKHAPATNAM Andhra Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: <SHORT REFIT OF IN SHIP> | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1.0001 | HULL DEFECT LIST/ WORK PACKAGE - SR 19\n001 Docking- Vessel to be docked in both versions. Note 1:- Firms not to quote view docking, undocking and dock blocks preparation will be done by Navy and the job is required to be carried out in Navy Premises (i.e ND(V) slipway). Note 2:- Last date of Undocking -06 Mar 17 | Item no 1 | 1 | Firm not to quote |
2 | 1.0002 | 002 Hull Cleaning (a) Under Water and Boot Top Area HP jet clean entire under water area and boot top area (with a pressure not exceeding 3000 PSI) including ship side and remove the marine growth/barnacles and prepare for survey. (a) U/W area: 350 Sqm,(b) Boot Top area: 150 Sqm | Item no 2 | 500 | Sqm |
3 | 1.0003 | 002 Hull Cleaning (b) Above Water Area including Bulwark Clean the entire above water area with HP Jet washing (not exceeding 3000 PSI) and present for survey | Item no 3 | 325 | Sqm |
4 | 1.0004 | 002 Hull Cleaning (c) Super Structure Area Clean the entire Super Structure Area area with HP Jet washing (not exceeding 3000 PSI) and present for survey | Item no 4 | 300 | Sqm |
5 | 1.0005 | 002 Hull Cleaning (d) Weather Decks Area (including fittings) Clean the entire weather deck area with HP Jet washing (not exceeding 3000 PSI) and present for survey | Item no 5 | 320 | Sqm |
6 | 1.0006 | 002 Hull Cleaning (e) Miscellanious Tanks Manually clean Following tanks and present for survey Fore Peak Tanks (03nos) Ballast Tanks(02 Nos), Cable locker-01 Fresh water tanks Fire fightining foam tanks Cofferdams (02) | Item no 6 | 650 | sqm |
7 | 1.0007 | 002 Hull Cleaning (f) Internal Compartments - Engine Room and SRP compartment Manually clean following internal compartments and present for survey. (i) Engine room. (ii) SRP compartment | Item no 7 | 450 | Sqm |
8 | 1.0008 | 002 Hull Cleaning (g) Fuel Tanks Fuel / RU Tanks Manually clean following Fuel/RU tanks and present for survey. (a) Fuel Tank (02 nos) (b) RU Tanks (02 nos) (c) Lub Oil Tank (02 nos) | Item no 8 | 500 | Sqm |
9 | 1.0009 | 003 Hull survey (a) Visual Survey External and Internal Hull survey. Carry out visual and hammer survey/UTG survey in accordance with NO 01/15 of under water hull , boot top area, above water hull, super structure, weather decks and all internal compartments(i.e. FW tanks, ballast tanks, fore peak tank, engine room, steering compartment, FO tanks, cofferdams, all stiffeners and deck fittings etc..All manholes to be inspected and repaired to ensure water tightness, chalk impression test to be carried out. Approx. area: 3000 Sqm Firm to submit 07 copies of Hull survey report . Firm to prove the welds by non-destructive tests and by hose test on completion of welding. | Item no 9 | 3000 | Sqm |
10 | 1.001 | 003 Hull survey (b) UTG Survey External and Internal Hull survey. Quote for UTG survey points at various locations. | Item no 10 | 6000 | No |
11 | 1.0011 | 004 Steel Renewals Quote for steel renewal at various locations as per survey report. Note 1:- Quoted repair cost shall include cost of both sides blasted and primed Grade `A’ quality ship building steel for shell and IS 2062 Grade `B’ quality steel for non structural works, degutting/regutting/ renewal of all obstructions in way of steel renewals including lagging/panelling, minor fittings/ equipments with their foundations, ventilation systems, staging etc., as indicated by survey team / RMT, proving of the weld runs by non-destructive tests and by hose test on completion of welding, pressure testing and proving of tanks where steel renewal undertaken etc. Note 2:- Firms to indicate cost of new panelling(2mm thick) and Lagging (2" MFMB) material in the budgetary cost for 50 sqm each. | Item no 11 | 10 | Tons |
12 | 1.0012 | 005 Build ups Carry out build ups as indicated by the Hull survey team/ Surveyor (a) 25 x 25 mm - 300 Nos | Item no 12 | 300 | Nos |
13 | 1.0013 | 005 Build ups Carry out build ups as indicated by the Hull survey team/ Surveyor (b) 50 x50 mm - 150 Nos | Item no 13 | 150 | Nos |
14 | 1.0014 | 006 Fairing Carryout fairing of deformed structures as indicated by Hull Survey Team/ Surveyor | Item no 14 | 30 | Sqm |
15 | 1.0015 | 007 Re-welding run Carry out re-welding runs on weld seams as indicated by Hull survey team/ QC/ RMT. | Item no 15 | 20 | RMT |
16 | 1.0016 | 008 Sea tube (a) Hydro jet blasting, survey and pressure testing of sea tube including sea chest to be carried out. Dia - 300mm | Item no 16 | 4 | Nos |
17 | 1.0017 | 008 Sea tube (b) carryout renewal of defective seatubes, OD-300mm, schedule 80. | Item no 17 | 2 | nos |
18 | 1.0018 | 009 Draught Marks Draught marks corroded/eaten away, to be renewed and painted. Both Roman and Numeric. | Item no 18 | 36 | Nos |
19 | 1.0019 | 010 Sacrificial Anodes (a) Renew Sacrificial anodes (MK-I) those consumed more than 50% Note:- Anodes Navy/COY supply. | Item no 19 | 16 | No |
20 | 1.002 | 010 Sacrificial Anodes (b) Renew Sacrificial anodes (MK- V) those consumed more than 50% Note:- Anodes Navy/COY supply. | Item no 20 | 30 | No |
21 | 1.0021 | 011 Surface preparation. Under Water area including Boot top area (a) Spot blasting to SA 2.5 on paint damaged areas/ renewed plate areas as per the paint OEM rep recommendation for paint application. | Item no 21 | 200 | Sqm |
22 | 1.0022 | 011 Surface preparation Under Water area including Boot top area (b) Sweep blasting to SA 1 on the rest of the underwater areas for removal of anti-fouling and application of tie coat and 03 coats of anti-fouling. | Item no 22 | 300 | Sqm |
23 | 1.0023 | 012 Painting \nUnder Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: Primer - Intergard 269 primer -40-50 microns | Item no 23 | 200 | Sqm |
24 | 1.0024 | 012 Painting \nUnder Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2nd Coat: Anti Corrosive - Intersheild 300 (Aluminium) - 150 microns | Item no 24 | 200 | Sqm |
25 | 1.0025 | 012 Painting \nUnder Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (c) 3rd Coat: Anti Corrosive - Intersheild 300 (Bronze) - 150 microns | Item no 25 | 200 | Sqm |
26 | 1.0026 | 012 Painting \nUnder Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (d) 4th Coat: Tie Coat: Intergard 263 - 125 microns | Item no 26 | 200 | Sqm |
27 | 1.0027 | 012 Painting \nUnder Water Area including Boot top area - AKZO NOBEL Scheme. \nUnder Water Area - Painting - AKZO NOBEL Scheme. Paint under water area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (e) 5th Coat: A/F: Intersmooth360(Brown) - 150 microns | Item no 27 | 500 | Sqm |
28 | 1.0028 | 012 Painting \nUnder Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (f) 6th Coat: A/F: Intersmooth360(Dark Red) - 150 microns | Item no 28 | 500 | Sqm |
29 | 1.0029 | 012 Painting \nUnder Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (g) 7th Coat: A/F: Intersmooth360(Brown) - 150 microns | Item no 29 | 350 | Sqm |
30 | 1.003 | 012 Painting \nUnder Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (h) 8th Coat: A/F Intersmooth360 (Black) - 150 microns DFT | Item no 30 | 150 | Sqm |
31 | 1.0031 | 013 Surface prepartion Above Water Area and Bulwark including guardrails (a) Carry out mechanical cleaning to ST3 standard for paint application as per survey report by Paint OEM rep | Item no 31 | 100 | Sqm |
32 | 1.0032 | 013 Surface prepartion Above Water Area and Bulwark including guardrails (b) Carry out mechanical cleaning to ST1 standard for paint application as per survey report by Paint OEM rep | Item no 32 | 225 | SQM |
33 | 1.0033 | 014 Painting Above Water Area and Bulwark including guardrails - AKZO NOBEL Scheme. Paint above water area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: Intergard 269 50 microns DFT | Item no 33 | 100 | Sqm |
34 | 1.0034 | 014 Painting Above Water Area and Bulwark including guardrails - AKZO NOBEL Scheme. Paint above water area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2nd Coat:Intergard 5600 (Grey) - 125 microns DFT | Item no 34 | 100 | Sqm |
35 | 1.0035 | 014 Painting Above Water Area and Bulwark including guardrails - AKZO NOBEL Scheme. Paint above water area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (c) 3rd Coat: Intergard 5600 (Red) - 125 microns DFT | Item no 35 | 100 | Sqm |
36 | 1.0036 | 014 Painting Above Water Area and Bulwark including guardrails - AKZO NOBEL Scheme. Paint above water area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (d) 4th Coat:Interthane 990 (Grey) - 60 microns DFT | Item no 36 | 325 | Sqm |
37 | 1.0037 | 015 Surface prepartion Super Structure and Deck Fittings (a) Carry out mechanical cleaning to ST3 standard as survey report of Paint OEM for paint application. | Item no 37 | 100 | Sqm |
38 | 1.0038 | 015 Surface prepartion Super Structure and Deck Fittings (b) Carry out mechanical cleaning to ST1 standard as survey report of Paint OEM for paint application. | Item no 38 | 200 | Sqm |
39 | 1.0039 | 016 Painting Superstructure and Deck fittings - AKZO NOBEL Scheme. Paint super structure area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: Intergard 269 - 50 microns DFT | Item no 39 | 100 | sqm |
40 | 1.004 | 016 Painting Superstructure and Deck fittings - AKZO NOBEL Scheme. Paint super structure area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2nd Coat:Intergard 5600 (Grey) - 125 microns DFT | Item no 40 | 100 | Sqm |
41 | 1.0041 | 016 Painting Superstructure and Deck fittings - AKZO NOBEL Scheme. Paint super structure area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (c) 3rd Coat: Intergard 5600 (Red) - 125 microns DFT | Item no 41 | 100 | Sqm |
42 | 1.0042 | 016 Painting Superstructure and Deck fittings - AKZO NOBEL Scheme. Paint super structure area with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (d) 4th Coat:Interthane 990 (Grey) - 60 microns DFT | Item no 42 | 300 | Sqm |
43 | 1.0043 | 017 Surface prepartion Weather Deck and fittings (a) Carry out mechanical cleaning to ST3 standard for paint application as per survey report by Paint OEM rep | Item no 43 | 180 | Sqm |
44 | 1.0044 | 017 Surface prepartion Weather Deck and fittings (b) Carry out mechanical cleaning to ST1 standard for paint application as per survey report by Paint OEM rep | Item no 44 | 140 | SQM |
45 | 1.0045 | 018 Painting Weather Deck and fittings - AKZO NOBEL Scheme. Paint weather decks and fittings with following paint scheme.\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: primer - Intergard 269 -50 microns DFT | Item no 45 | 180 | sqm |
46 | 1.0046 | 018 Painting Weather Deck and fittings - AKZO NOBEL Scheme. Paint weather decks and fittings with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2nd Coat: Intersheild 300 - 300 microns | Item no 46 | 180 | Sqm |
47 | 1.0047 | 018 Painting Weather Deck and fittings - AKZO NOBEL Scheme. paint with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (c) 3rd Coat: Intersheild 852 (Non Skid D.A. Grey) - 800 microns | Item no 47 | 320 | Sqm |
48 | 1.0048 | 019 Surface preparation Internal compartments -Tanks (a) Carry out mechanical surface preparation to ST 3 standards for paint application whereever peeled off / paint defective in fore peak (02) ballast tank(01) cable locker (01) Coffer dam (01) | Item no 48 | 200 | sqm |
49 | 1.0049 | 019 Surface preparation Internal compartments -Tanks (b) Carry out mechanical surface preparation to ST 1 standards for paint application whereever peeled off / paint defective in fore peak (02) ballast tank(01) cable locker (01) Coffer dam (01) | Item no 49 | 250 | sqm |
50 | 1.005 | 020 Painting Fore peak Tank, Ballast tank, Cable locker and Cofferdam - AKZO NOBEL Scheme. Paint fore peak tanks,cofferdams and cable locker with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: primer - Intergard 269 -50 microns DFT | Item no 50 | 200 | Sqm |
51 | 1.0051 | 020 Painting Fore peak Tank, Ballast tank, Cable locker and Cofferdam - AKZO NOBEL Scheme. Paint fore peak tanks,cofferdams and cable locker with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2nd Coat: Anticorrosive Intershield 300 (Aluminum) - 150 microns | Item no 51 | 200 | Sqm |
52 | 1.0052 | 020 Painting Fore peak Tank, Ballast tank, Cable locker and Cofferdam - AKZO NOBEL Scheme. Paint fore peak tanks,cofferdams and cable locker with following paint scheme:-\nNote:- Quoted repair cost shall be inclusive of cost of paints also. (c) 3rd Coat: Anticorrosive Intershield 300 (Bronze) - 150 microns | Item no 52 | 450 | Sqm |
53 | 1.0053 | 021 Surface preparation Fresh water tanks, Foam tank and Fresh water gravity tanks. (a) Carry out mechanical cleaning to ST 3 standard as survey report of Paint OEM for paint application. Fresh water tanks, Foam tank and Fresh water gravity tanks | Item no 53 | 100 | Sqm |
54 | 1.0054 | 021 Surface preparation Fresh water tanks, Foam tank and Fresh water gravity tanks. (b) Carry out mechanical cleaning to ST1 standard as survey report of Paint OEM for paint application. Fresh water tanks, Foam tank and Fresh water gravity tanks | Item no 54 | 200 | Sqm |
55 | 1.0055 | 022 Painting Fresh water tanks, Foam tank and Fresh water gravity tanks - AKZO NOBEL Scheme. AKZO NOBEL Scheme. Paint both fresh water tanks/ foam tanks with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: Interline 850 - 150 microns DFT | Item no 55 | 100 | sqm |
56 | 1.0056 | 022 Painting Fresh water tanks, Foam tank and Fresh water gravity tanks - AKZO NOBEL Scheme. Paint both fresh water tanks/ foam tanks with following paint scheme:- note:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2rd Coat: Interline 850 - 150 microns DFT | Item no 56 | 300 | Sqm |
57 | 1.0057 | 023 Surface Preparation Internal Compartments - Bilges of Engine Room and ASP Compartment (a) Carry out mechanical cleaning to ST 3 standard as survey report of Paint OEM for paint application. | Item no 57 | 250 | Sqm |
58 | 1.0058 | 023 Surface Preparation Internal Compartments - Bilges of Engine Room and ASP Compartment (b) Carry out mechanical cleaning to ST 1 standard as survey report of Paint OEM for paint application. | Item no 58 | 200 | Sqm |
59 | 1.0059 | 024 Painting Bilges of Engine Room and ASP Compartment - AKZO NOBEL Scheme. Paint bilges of Engine room and ASP compartment with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: primer - Intergard 269 - 50 microns DFT | Item no 59 | 250 | sqm |
60 | 1.006 | 024 Painting Bilges of Engine Room and ASP Compartment - AKZO NOBEL Scheme. Paint bilges of Engine room and ASP compartment with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also (b) 2nd Coat: Anticorrosive - Intersheild 300 (Aluminium) - 150 microns | Item no 60 | 250 | Sqm |
61 | 1.0061 | 024 Painting Bilges of Engine Room and ASP Compartment - AKZO NOBEL Scheme. Paint bilges of Engine room and ASP compartment with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also (c) 3rd Coat: Anticorrosive - Intersheild 300 (Bronze) - 150 microns | Item no 61 | 450 | Sqm |
62 | 1.0062 | 025 Surface Preparation Bulkheads of Engine room and SRP compartments and living spaces. \n(a) Carry out mechanical cleaning to ST 3 standard as survey report of Paint OEM for paint application. | Item no 62 | 150 | Sqm |
63 | 1.0063 | 025 Surface Preparation Bulkheads of Engine room and SRP compartments and living spaces. \n (b) Carry out mechanical cleaning to ST 1 standard as survey report of Paint OEM for paint application. | Item no 63 | 400 | Sqm |
64 | 1.0064 | 026 Painting Bulkheads of Engine room and SRP compartments and living spaces - Akzo Nobel Scheme. Paint bulkheads of Engine room and SRP compartments and living spaces ,with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: primer - Intergard 269 - 50 microns DFT | Item no 64 | 150 | sqm |
65 | 1.0065 | 026 Painting Bulkheads of Engine room and SRP compartments and living spaces - Akzo Nobel Scheme. Paint bulkheads of Engine room and SRP compartments and living spaces ,with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2nd Coat: White interior fire retradant paint(JSS 8010-72:2001-100 microns | Item no 65 | 150 | sqm |
66 | 1.0066 | 026 Painting Bulkheads of Engine room and SRP compartments and living spaces - Akzo Nobel Scheme. Paint bulkheads of Engine room and SRP compartments and living spaces ,with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (c) 3nd Coat: White interior fire retradant paint(JSS 8010-72:2001-100 microns | Item no 66 | 550 | sqm |
67 | 1.0067 | 027 Air Pressure Testing Air Pressure Test the following tanks to 0.14 Kg per Sq. Cms and rectify the defects any observed during pressure testing and prove. note:- APT and proving of those tanks wherein steel renewal undertaken as part of steel renewal DL. 0003(c) above is that of Firm's liability with No Additional Cost and those tanks where no steel renewals undertaken only would be considered for payment as per the indicated rates under this DL. Serial. (a) Fresh Water Tank | Item no 67 | 1 | Nos |
68 | 1.0068 | 027 Air Pressure Testing Air Pressure Test the following tanks to 0.14 Kg per Sq. Cms and rectify the defects any observed during pressure testing and prove. note:- APT and proving of those tanks wherein steel renewal undertaken as part of steel renewal DL. 0003(c) above is that of Firm's liability with No Additional Cost and those tanks where no steel renewals undertaken only would be considered for payment as per the indicated rates under this DL. Serial. (b) Ballast Tank | Item no 68 | 2 | No |
69 | 1.0069 | 027 Air Pressure Testing Air Pressure Test the following tanks to 0.14 Kg per Sq. Cms and rectify the defects any observed during pressure testing and prove. note:- APT and proving of those tanks wherein steel renewal undertaken as part of steel renewal DL. 0003(c) above is that of Firm's liability with No Additional Cost and those tanks where no steel renewals undertaken only would be considered for payment as per the indicated rates under this DL. Serial. (c) Forepeak Tank | Item no 69 | 1 | No |
70 | 1.007 | 027 Air Pressure Testing Air Pressure Test the following tanks to 0.14 Kg per Sq. Cms and rectify the defects any observed during pressure testing and prove. note:- APT and proving of those tanks wherein steel renewal undertaken as part of steel renewal DL. 0003(c) above is that of Firm's liability with No Additional Cost and those tanks where no steel renewals undertaken only would be considered for payment as per the indicated rates under this DL. Serial. (d) Fuel Tank | Item no 70 | 5 | Nos |
71 | 1.0071 | 027 Air Pressure Testing Air Pressure Test the following tanks to 0.14 Kg per Sq. Cms and rectify the defects any observed during pressure testing and prove. note:- APT and proving of those tanks wherein steel renewal undertaken as part of steel renewal DL. 0003(c) above is that of Firm's liability with No Additional Cost and those tanks where no steel renewals undertaken only would be considered for payment as per the indicated rates under this DL. Serial. (e) Aft Peak Tank | Item no 71 | 2 | No |
72 | 1.0072 | 027 Air Pressure Testing Air Pressure Test the following tanks to 0.14 Kg per Sq. Cms and rectify the defects any observed during pressure testing and prove. note:- APT and proving of those tanks wherein steel renewal undertaken as part of steel renewal DL. 0003(c) above is that of Firm's liability with No Additional Cost and those tanks where no steel renewals undertaken only would be considered for payment as per the indicated rates under this DL. Serial. (f) Fire fighting Foam Tank | Item no 72 | 1 | No |
73 | 1.0073 | 027 Air Pressure Testing Air Pressure Test the following tanks to 0.14 Kg per Sq. Cms and rectify the defects any observed during pressure testing and prove. note:- APT and proving of those tanks wherein steel renewal undertaken as part of steel renewal DL. 0003(c) above is that of Firm's liability with No Additional Cost and those tanks where no steel renewals undertaken only would be considered for payment as per the indicated rates under this DL. Serial. (g) Cofferdam | Item no 73 | 2 | NO |
74 | 1.0074 | 028 Bilge Platform plate Renew bilge platform plate. Material- aluminium chequered plate, thickness- 05 mm | Item no 74 | 120 | Sqm |
75 | 1.0075 | 029 Bilge Platform Supporting brackets Bilge platform supporting brackets at indicated locations to be renewed. Mat - ms | Item no 75 | 20 | Rmt |
76 | 1.0076 | 030 Key Fender Head & Stern fenders All key fenders to be removed, inspected and surveyed and necessary repairs to be attended on fender securing brackets(C Channel) and associted hull fittings ,Head and stern D shaped key fenders perished/ cracked. coaming plate, securing nuts/ bolts and partition plates in between fenders corroded, thinned and holed. All fasteners to be renewed. Fastener mat : MS (a) Top and bottom securing brackets/ plates and partition plates length varies from 430 mm to 850 mm x 8mm thick | Item no 76 | 40 | Sqm |
77 | 1.0077 | 030 Key Fender Head & Stern fenders All key fenders to be removed, inspected and surveyed and necessary repairs to be attended on fender securing brackets(C Channel) and associted hull fittings ,Head and stern D shaped key fenders perished/ cracked. coaming plate, securing nuts/ bolts and partition plates in between fenders corroded, thinned and holed. All fasteners to be renewed. Fastener mat : MS (b) Head key fenders to be renewed with white colour fenders of EPDM rubber as per NES 170.Shore Hardness - 70 to 74 (+/- 5) . Crossection size 300mmx300mm. Length of fenders varies between 430mm to 850 mm. | Item no 77 | 37 | Nos |
78 | 1.0078 | 030 Key Fender Head & Stern fenders All key fenders to be removed, inspected and surveyed and necessary repairs to be attended on fender securing brackets(C Channel) and associted hull fittings ,Head and stern D shaped key fenders perished/ cracked. coaming plate, securing nuts/ bolts and partition plates in between fenders corroded, thinned and holed. All fasteners to be renewed. Fastener mat : MS (c) Stern key fenders to be renewed with white colour fenders EPDM rubber as per NES 170. Crossection size 300mmx300mm. Length of fenders varies between 450 mm to 1000 mm. | Item no 78 | 51 | Nos |
79 | 1.0079 | 030 Key Fender Head & Stern fenders All key fenders to be removed, inspected and surveyed and necessary repairs to be attended on fender securing brackets(C Channel) and associted hull fittings ,Head and stern D shaped key fenders perished/ cracked. coaming plate, securing nuts/ bolts and partition plates in between fenders corroded, thinned and holed. All fasteners to be renewed. Fastener mat : MS (d) MS Nuts and bolts - 26 mm dia, Length of bolt rod varies between 1225mm to 620 mm. | Item no 79 | 300 | Nos |
80 | 1.008 | 031 Tyre fenders Tyre fender damaged on P&S side , to be renwed with used aircraft tyre fenders moulded with 8 mm white natural rubber. Mat- Rubber, colour-white . No painting or coating of any other form will be permitted. Vendors to adhere sow (a) OD 750mm; ID 400mm width of tyre- 360 mm | Item no 80 | 20 | nos |
81 | 1.0081 | 037 Tyre fenders Tyre fender damaged on P&S side , to be renwed with used aircraft tyre fenders moulded with 8 mm white natural rubber. Mat- Rubber, colour-white . No painting or coating of any other form will be permitted. Vendors to adhere sow (b) Securing chains: 16 mm dia | Item no 81 | 100 | RMT |
82 | 1.0082 | 031 Tyre fenders Tyre fender damaged on P&S side , to be renwed with used aircraft tyre fenders moulded with 8 mm white natural rubber. Mat- Rubber, colour-white . No painting or coating of any other form will be permitted. Vendors to adhere sow (c) Shackles 16 mm dia | Item no 82 | 75 | Nos |
83 | 1.0083 | 031 Tyre fenders Tyre fender damaged on P&S side , to be renwed with used aircraft tyre fenders moulded with 8 mm white natural rubber. Mat- Rubber, colour-white . No painting or coating of any other form will be permitted. Vendors to adhere sow (d) Securing Brackets of Tyre Fenders damaged / detoriartyed to be renewed | Item no 83 | 60 | Nos |
84 | 1.0084 | 031 Tyre fenders Tyre fender damaged on P&S side , to be renwed with used aircraft tyre fenders moulded with 8 mm white natural rubber. Mat- Rubber, colour-white . No painting or coating of any other form will be permitted. Vendors to adhere sow (e) Tyre fenders , OD- 1000 MM, ID 800 MM for fwd and aft . Width-350 mm | Item no 84 | 4 | Nos |
85 | 1.0085 | 032 Under water fenders (a) Fabrication of C Channel and fitment (as per enclosed drawings) on u/w hull for securing of u/w rubber fenders, size of the C Channels 1000 X 270 X 100 mm , mat-ms size 10 mm, (As necessary) (cost including cutting and positioning / shaping of and welding of brackets as per drawing ) Note : removal and refitment of panneling / lagging in the way to facilitate hot work for welding of brackets are to consider by the firm and cost including the same | Item no 85 | 150 | RMT |
86 | 1.0086 | 032 Under water fenders (b) Fenders to be fitted in Black colour below water line and Above water line with-white colour. Specification - EPDM rubber as per NES 170, D fenders as per enclosed drawing. Fenders is to be fitted as per user requirment . | Item no 86 | 150 | RMT |
87 | 1.0087 | 032 Underwater fenders securing arrangment (c) Fenders is to be secured with proper nut, bolt and washers as per sample. (Mat - MS with nickel coating), Nut & Bolt Dia -20 mm, bolt Length-370 mm, Washer dia-22mm) (Note : QUOTE FOR NUTS BOLTS AND ASSOCIATED ACCESSORIES also) | Item no 87 | 525 | Nos |
88 | 1.0088 | 033 Bulwark coaming Bulwark coaming coaming plate corroded and thinned. To be included in hull in survey and renew as per survey report. To be quoted under steel renewal. (a) Bulwark area | Item no 88 | 50 | sqm |
89 | 1.0089 | 033 Bulwark coaming Bulwark coaming pipes corroded and thinned. To be included in hull in survey and renew as per survey report. To be quoted under steel renewal. (b) Pipe On Bulwark | Item no 89 | 30 | Rmt |
90 | 1.009 | 033 Bulwark coaming (c) Frames deformed at various locations on weather deck including bulwark frames | Item no 90 | 10 | Nos |
91 | 1.0091 | 034 Anchor and chain cable Anchor and Anchor chain cable. Anchor and Anchor chain cable and associated fittings are to be mechanically cleaned, eased for free movement, hydro jet blast chain cable to bare metal, paint with black bituminous paint post survey IAW NO 07/11 and refit back. Renew off all such parts which declared unservicebile & prove load test and submit load test certificate to CoY office. note : -The job involves removal of all anchor accessories, laying out and hydro jet blasting for survey and painting and final refitment post survey by ND (V) (a) Chain cable | Item no 91 | 275 | rmt |
92 | 1.0092 | 034 Anchor and chain cable Anchor and Anchor chain cable. Anchor and Anchor chain cable and associated fittings are to be mechanically cleaned, eased for free movement, hydro jet blast chain cable to bare metal, paint with black bituminous paint post survey IAW NO 07/11 and refit back. Renew off all such parts which declared unservicebile & prove load test and submit load test certificate to CoY office. note : -The job involves removal of all anchor accessories, laying out and hydro jet blasting for survey and painting and final refitment post survey by ND (V) (b) Swivel piece | Item no 92 | 4 | Nos |
93 | 1.0093 | 034 Anchor and chain cable Anchor and Anchor chain cable. Anchor and Anchor chain cable and associated fittings are to be mechanically cleaned, eased for free movement, hydro jet blast chain cable to bare metal, paint with black bituminous paint post survey IAW NO 07/11 and refit back. Renew off all such parts which declared unservicebile & prove load test and submit load test certificate to CoY office. note : -The job involves removal of all anchor accessories, laying out and hydro jet blasting for survey and painting and final refitment post survey by ND (V) (c) Lug less joining shackles | Item no 93 | 12 | Nos |
94 | 1.0094 | 034 Anchor and chain cable Anchor and Anchor chain cable. Anchor and Anchor chain cable and associated fittings are to be mechanically cleaned, eased for free movement, hydro jet blast chain cable to bare metal, paint with black bituminous paint post survey IAW NO 07/11 and refit back. Renew off all such parts which declared unservicebile & prove load test and submit load test certificate to CoY office. note : -The job involves removal of all anchor accessories, laying out and hydro jet blasting for survey and painting and final refitment post survey by ND (V) (d) Stopper/Compressor | Item no 94 | 2 | Nos |
95 | 1.0095 | 034 Anchor and chain cable Anchor and Anchor chain cable. Anchor and Anchor chain cable and associated fittings are to be mechanically cleaned, eased for free movement, hydro jet blast chain cable to bare metal, paint with black bituminous paint post survey IAW NO 07/11 and refit back. Renew off all such parts which declared unservicebile & prove load test and submit load test certificate to CoY office. note : -The job involves removal of all anchor accessories, laying out and hydro jet blasting for survey and painting and final refitment post survey by ND (V) (e) Anchors including spare anchor | Item no 95 | 3 | Nos |
96 | 1.0096 | 035 Anchor windlass Overhaul Anchor windlass , prove for satisfactory operation. Note :- Overhaul involves removal of drum,gearbox, renewal of brake lining, OH of motor and ovrhaul of all these items and refitment. | Item no 96 | 2 | Nos |
97 | 1.0097 | 036 Capstan Overhaul Q- deck capstan and prove for satisfactory operation. Dia 400 mm note :- Overhaul involves removal of drum,gearbox, renewal of brake lining, OH of motor and ovrhaul of all these items and refitment. | Item no 97 | 1 | Nos |
98 | 1.0098 | 037 Single bollards (a) Single bollards corroded, thinned and holed. To be renewed as per survey report.Details :- Size of pipe: 280mm diax1200 mm Height. Doubler plate of dia 300mm and 10mm thick, dummy plate of 300mm dia and 12mm thick, supporting bracket of bollard pipe of 380mmx360mmx10mm. Tripping bracket of size 250mmx150mm and 03 no.s on each bollard. | Item no 98 | 3 | Nos |
99 | 1.0099 | 037 Single Bollard (b) Provision of 06 in nos single bollrads on weather decks on both sides (P&S), details - Size of pipe: 300mm diax1500 mm Height. Doubler plate of dia 300mm and 10mm thick, dummy plate of 300mm dia and 12mm thick, corroded to be renewed including supporting bracket of bollard pipe of 380mmx360mmx10mm. Tripping bracket of size 250mmx150mm 03 no.s on each bollard. T bracket length of 200 mm and dia 50 mm. is to be fitted on bollard. | Item no 99 | 6 | Nos |
100 | 1.01 | 038 Twin Bollard Twin bollards corroded, thinned and holed, to be renewed as per survey .Details (Dia of bollard pipe: 270mm, Height of bollard: 620mm, Size of bollard base/ foundation: 1140mmx380mmx 220mm; Doubler plate size: 1240mmx500mm; side rods of bollard pipe: 520mmx40mmdia rod; Dummy plate 300mm dia x12mm thick. | Item no 100 | 4 | Nos |
101 | 1.0101 | 039 Rubber beading Rubber beading of following wt doors , hatches,scuttles perished/cracked to be renewed and chalk test to be proved. WT door. (a) Rubber beading size: 45mmx20mm; specification as per sample) | Item no 101 | 35 | RMtrs |
102 | 1.0102 | 039 Rubber beading Rubber beading of following wt doors , hatches,scuttles perished/cracked to be renewed and chalk test to be proved. (b) WT door.Operating clips to be overhauled | Item no 102 | 48 | Nos |
103 | 1.0103 | 040 WT hatch. (a) Rubber beading size: 43mmx25mm | Item no 103 | 20 | RMtrs |
104 | 1.0104 | 040 WT hatch. (b) Operating clips to be overhauled | Item no 104 | 28 | Nos |
105 | 1.0105 | 040 WT hatch. (c) Ventilator/Sky light clips to be overhauled. | Item no 105 | 8 | Nos |
106 | 1.0106 | 040 WT hatch. (d) Funnel ventilator clips to be overhauled. | Item no 106 | 2 | Nos |
107 | 1.0107 | 041 WT Hatch clips 10 in no hatch clips broken / damaged. To be renewed. Mat. MS | Item no 107 | 10 | Nos |
108 | 1.0108 | 042 WT Hatch metal coaming Metallic coaming of 05 in no WT Hatches on weather deck corroded and thinned. To be renewed as per survey report. Area - 4 Sqm. | Item no 108 | 20 | RMT |
109 | 1.0109 | 043 Single arm davit Overhauling of Single arm davit is to be carried out, prove for satisfactory opertaion, (make and model Hemant eng mumbai). Load testing of davit to be carried out post overhauling. | Item no 109 | 1 | Nos |
110 | 1.011 | 044 Steel wire rope Servicibilty checks of steel wire rope is to be carried out and renewed if unserviceable and load tested upto 1.5 times of SWL.as per INBR 1552 (SWL- 1250 kgs), Submit a copy of load test to this office. | Item no 110 | 50 | RMtrs |
111 | 1.0111 | 045 PIPE LINES Chemical cleanig of soil and fresh water pipe lines at various places , renewed/repaired if any defect. | Item no 111 | 30 | Rmt |
112 | 1.0112 | 046 NWT doors NWT wooden doors at various locations perished /damaged. To be renewed/repaired . | Item no 112 | 10 | Nos |
113 | 1.0113 | 047 Ventilation Following mushroom type ventilators to be removed, cleaned/ overhauled and fitted beck. \n( a) Dia: 550mm dia | Item no 113 | 2 | Nos |
114 | 1.0114 | 047 Ventilation Following mushroom type ventilators to be removed, cleaned/ overhauled and fitted beck.\n(b) Dia - 360mm dia | Item no 114 | 3 | Nos |
115 | 1.0115 | 048 Towing Hook Towing hook to be overhauled and load tested to 25 Tons . note 1 -The job involves overhaul of operating handle, steel wire rope and in way pullies.note 2 - Firm to project for load testing to CoY. Load testing will be undertaken by ND(VZG). Any defects occurred during load testing will be rectified by the firm. | Item no 115 | 2 | Nos |
116 | 1.0116 | 049 Tanks/Manhole (a) Manholes to be renewed as per survey carried in DL No. 0002 Size of manhole: 720x520x08mm thick | Item no 116 | 8 | Nos |
117 | 1.0117 | 049 Tanks/Manhole (b) 04 No.s Handles of 10mm dia rod and length 400mm corroded /thinned /holed to be remewd | Item no 117 | 4 | Nos |
118 | 1.0118 | 049 Tanks/Manhole (c) Neoprene rubber joints of 720mmx520mmx06mm perished/deterioted to be renwed | Item no 118 | 8 | Nos |
119 | 1.0119 | 049 Tanks/Manhole (d) Nuts and bolts/ studs of 16mm dia and 50mm length - 20 no.s on each manhole. Mat SS | Item no 119 | 160 | nos |
120 | 1.012 | 049 Tanks/Manhole (e) Distance piece and flanges: Dia 150mm (including rubber joints) | Item no 120 | 8 | Nos |
121 | 1.0121 | 050 Nav Light Nav light foundation (Port & Stbd) corroded, to be renewed. Size: 620mmx620mmx300mm and thickness 6mm, Mat MS | Item no 121 | 2 | Nos |
122 | 1.0122 | 051 Drainage System (a) Deck Drain pipes corroded/ holed, to be renewed. Dia 2 1/2 inch. Mat: GI note : Pipes / fittings should be secured with rubber packings and clamps uniformly | Item no 122 | 15 | rmt |
123 | 1.0123 | 051 Drainage System (b) Scupper with coaming of drain pipe ( leading from 01 deck to No. 1 deck and bridge top to platform deck corroded/ thinned, to be renewed. Size: 250mmx200mm | Item no 123 | 6 | Nos |
124 | 1.0124 | 051 Drainage System (c ) Deck drain pieces on upper deck corroded, to be renewed. Dia 2 1/2 inch, each of length 01Mtr. note-The job involves removal/renewal and fitment of pipes/ panelling/ lagging/ trunking in the way. | Item no 124 | 4 | Nos |
125 | 1.0125 | 051 Drainage System (d) 4" Soil pipes of Crew, ED's and Master's bathroom to be removed chemically cleaned and fit back. | Item no 125 | 40 | RMtrs |
126 | 1.0126 | 051 Drainage System (e) Repair of 4" soil pipes to be carried out | Item no 126 | 10 | RMtrs |
127 | 1.0127 | 052 Extinguishers Provision of following extinguishers at various places. (a) 9 Ltr AFFF extinguisher | Item no 127 | 10 | Nos |
128 | 1.0128 | 052 Extinguishers Provision of following extinguishers at varios places (b) 2 Kg CO2 Extinguisher | Item no 128 | 6 | Nos |
129 | 1.0129 | 052 Extinguishers Provision of following extinguishers. (c) 10 Kg DCP extinguisher | Item no 129 | 3 | Nos |
130 | 1.013 | 052 Extinguishers Provision of followingff hoses at varios places (d) Fire hoses | Item no 130 | 6 | Nos |
131 | 1.0131 | 053 Foam solution Supply of Type 3% AFFF concentrate for forming mechanical foam | Item no 131 | 10 | Tons |
132 | 1.0132 | 054 Deck covering Deck underlay (Macrotech) to be preiared/ renewed at uprooted/ damaged/ steel renewed, accommodation areas, Wheel house and bathrooms. (a) Surface preparation and application of EROP. And Mass 98. | Item no 132 | 50 | Sq mtrs |
133 | 1.0133 | 054 Deck covering Deck underlay (Macrotech) to be preiared/ renewed at uprooted/ damaged/ steel renewed, accommodation areas, Wheel house and bathrooms (b) Surface preparation to be carried out by buffing on Mass 98 and application of Mass 96. | Item no 133 | 50 | Sq mtrs |
134 | 1.0134 | 054 Deck covering Deck underlay (Macrotech) to be preiared/ renewed at uprooted/ damaged/ steel renewed, accommodation areas, Wheel house and bathrooms (c) Surface preparation and application of sealer coat on entire area | Item no 134 | 100 | Sq mtrs |
135 | 1.0135 | 055 Chairs Chairs in bridge and master/crew cabin damaged/ broken/ including cushion & roller wheels Chairs is to be replaced with roller chairs. As per sample. | Item no 135 | 10 | Nos |
136 | 1.0136 | 056 Lifebuoy (a) Lifebuoys to be painted as per sample including lettering and symbols. Size: 300mmx100mmx06mm | Item no 136 | 4 | Nos |
137 | 1.0137 | 056 Lifebuoy (b) Realocating of lifebuoy frames on wheel house bulkheads (P &S). | Item no 137 | 2 | Nos |
138 | 1.0138 | 057 Life raft roller beam Life raft roller beams leading from weatherdeck to life raft deck corroded/thinned/holed. To be repaired/renewed. Mat- ms pipe, dia of the pipe- 10 cm | Item no 138 | 2 | Nos |
139 | 1.0139 | 058 Liferraft securing Stand Securing stand of Life rafts perished and damaged. To be renewed alongwith rubber lining and supporting frame, including fitment of HRG Mat-DMR 249 A , Thickness- 06mm. | Item no 139 | 2 | Nos |
140 | 1.014 | 059 Awnings Realocating of Existing Awning Shade frame of Gi pipes and fittment of the same on foxle area of the vessel on superstructure buklhead for smoth function for draining out of accumlated water : 3m x 6 m approx. Mat: GI pipes including Awning mat-PVC. | Item no 140 | 45 | RMT |
141 | 1.0141 | 060 Name board Tug name board persihed/damaged , to be repaired /renewed , wherever required\n(a) Vessel iluminating board-01, | Item no 141 | 1 | Nos |
142 | 1.0142 | 060 Name board Tug name board persihed/damaged , to be repaired /renewed , wherever required\n(b) Vessel name board- 02 including electopalting | Item no 142 | 2 | nos |
143 | 1.0143 | 060 Name board (c) Word letter of tug name on bulwark perished at fwd and stern , to be repaired/renewed, whererever required, tug name is to be painted with flourocent paint. | Item no 143 | 36 | Nos |
144 | 1.0144 | 061 Door locks Mortise lock of non wt door defectice at various locations , All defective moritse locks to be renewed. | Item no 144 | 10 | Nos |
145 | 1.0145 | 062 Locking arrangment Locking arrangement is to be provided in all the wt doors at various locations including hasp and staple arrangment | Item no 145 | 10 | Nos |
146 | 1.0146 | 063 Sunmica Deck head sunmica damaged at various locations , to be repaired/renewed | Item no 146 | 50 | sqm |
147 | 1.0147 | 064 MFMB lagging Degutting/reguttng of Mfmb lagging at accomodation area,wheel house to be carried out. | Item no 147 | 150 | sqm |
148 | 1.0148 | 065 Sanitry system SS Wash basin, corroded/thinned/holed to be repaired/renewed. (a) Wash basin Note:- Quoted repair cost shall include cost all items. | Item no 148 | 4 | Nos |
149 | 1.0149 | 065 Sanitry system wc of crew and master cabin corroded/thinned/holed to be repaired/renewed (b) .wc commode Note:- Quoted repair cost shall include cost all items. | Item no 149 | 6 | Nos |
150 | 1.015 | 065 Sanitry system wash basin including drain pipes of crew and master cabin corroded/thinned/holed to be repaired/renewed (c) wash basin including drain pipes Note:- Quoted repair cost shall include cost all items. | Item no 150 | 4 | Nos |
151 | 1.0151 | 065 Sanitry system (d)SS tap: 1/2 inch damaged to be renewed. Note:- Quoted repair cost shall include cost all items. | Item no 151 | 6 | Nos |
152 | 1.0152 | 065 Sanitry system (e).Supply pipes deformed to be renewed. Mat : Cu-Ni, dia: ½?? Note:- Quoted repair cost shall include cost all items | Item no 152 | 20 | RMT |
153 | 1.0153 | 065 Sanitry system (f) Drain pipe: Mat-MS,dia- 2?? to be renewed. Note:- Quoted repair cost shall include cost all items | Item no 153 | 15 | RMT |
154 | 1.0154 | 065 Sanitry system (g) Flush valves - Mat - Brass, Dia - 2" to be removed , eased out and fitted back Note:- Quoted repair cost shall include cost all items | Item no 154 | 4 | Nos |
155 | 1.0155 | 065 Sanitry system (h) Mirror as per sample to be renewed. Note:- Quoted repair cost shall include cost all items | Item no 155 | 3 | Nos |
156 | 1.0156 | 065 Sanitry system (j) SS stop cock 1’’ to be renewed. Note:- Quoted repair cost shall include cost all items | Item no 156 | 6 | Nos |
157 | 1.0157 | 065 Sanitry system (k) Fw pipe lines to be renewed. (Dia. 1 inch) (Mat - CuNi) Note:- Quoted repair cost shall include cost all items | Item no 157 | 15 | RMT |
158 | 1.0158 | 065 Sanitry system (l) Shower head including bath fittings to be renewed. Note:- Quoted repair cost shall include cost all items | Item no 158 | 6 | Nos |
159 | 1.0159 | 066 Foot step Foot step on foxle near bollard corroded/thinned/holed, including foundations , to be renewed/repairerd, as per survey repert, mat- Al chequerd plate. | Item no 159 | 1 | Nos |
160 | 1.016 | 067 Panelling panelling in living spaces/whell house and other areas , damaged at varios locations , to be renewed/repaired. (Mat-Wood) | Item no 160 | 20 | sqm |
161 | 1.0161 | 068 Kit Lockers Kit lockers in crew cabin and master cabin damaged to ber renewed/ repaired, (mat-CRCA) | Item no 161 | 12 | NO |
162 | 1.0162 | 069 Ladder Ladders to be manufactureda and welded on bulwark at stem , (Mat-MS) (Length- 2mtr) (Width- 0.5mtr) | Item no 162 | 2 | Nos |
163 | 1.0163 | 070 Mast winch Mast winch jammed , to be eased including all in ways pulleys | Item no 163 | 1 | NOS |
164 | 1.0164 | 071 Fisherman Plate Corroded/Thin/holed , to be renewed Mat-MS (a) Fish plate size: 20x20 inch, 10mm thickness | Item no 164 | 2 | Nos |
165 | 1.0165 | 071 Fisherman Plate Corroded/Thin/holed , to be renewed Mat-MS ( b) Doubler plate size:28x28inch, 10 mm thickness | Item no 165 | 2 | Nos |
166 | 1.0166 | 071 Fisherman Plate Corroded/Thin/holed , to be renewed Mat-MS (c) Angle bar 3 x1.5 inch | Item no 166 | 4 | Rmtrs |
167 | 1.0167 | 072 Butterfly nut SS butterfly nuts and tumbler bolt of engine room sky light &exhaust flaps broken. To be renewed. Dia of bolt : 20 mm & 6 inch length (Mat-SS) including rubber beading . Rmt-4 rmt | Item no 167 | 70 | Nos |
168 | 1.0168 | 073 Guard rail Guard rails on 01 & 02 deck (Port side) corroded/perished . To be repaired/renewed. (Mat-GI Pipe) Dia of guard rail pipe:1 ¾’’, | Item no 168 | 20 | RMT |
169 | 1.0169 | 074 Stanchions Stanchions on 01 & 02 deck (Port side) corroded/perished . To be repaired/renewed. (Mat-GI Pipe) Dia of stanchions pipe : 1.5" dia Pipe, 1Mtr length each | Item no 169 | 20 | RMT |
170 | 1.017 | 075 Non WT door Non water tight door of bridge and living spaces damaged including frames, to be repaired/renewed. | Item no 170 | 6 | Nos |
171 | 1.0171 | 076 Mob marker MOB marker stand on (p&s) damaged . To be renewed/repaired. | Item no 171 | 2 | Nos |
172 | 1.0172 | 077 Ventilation Wire mesh of all air vent corroded/perished. To be renewed. | Item no 172 | 25 | Sqm |
173 | 1.0173 | 078 Remote oprating valve Remote operating valve of fore peak tank, jammed , to be repaired and operation proven. | Item no 173 | 1 | Nos |
174 | 1.0174 | 079 Rubber beading Rubber beading of vent openings and goose neck deteriorated. To be renewed. | Item no 174 | 20 | Rmt |
175 | 1.0175 | 080 Supporting frames Supporting frames of bulwark on (P&S) side buckled. To be repaired/renewed. Mat-MS . To be repaired as per Hull survey report | Item no 175 | 8 | Nos |
176 | 1.0176 | 081 Vent flaps Vent flaps deformed on A bracket, to be renewed | Item no 176 | 2 | Nos |
177 | 1.0177 | 082 Bulwark doors Bulwarks doors including hand rails on weather deck jammed /dented/damaged. To be renewed/ repaired. | Item no 177 | 6 | Nos |
178 | 1.0178 | 083 Cleats MS cleats on (p&s) bulwark damaged, to be renewed as per sample | Item no 178 | 6 | Nos |
179 | 1.0179 | 084 Boxes (a) Fire hoses securing boxes and its glass damaged at various locations , to be renewed/repaired | Item no 179 | 10 | Nos |
180 | 1.018 | 084 Boxes (b) Boxes of variuos control panel corroded/thinned/holed at varios locations, to be renewed as per existing as fitted sample. (Mat-MS) | Item no 180 | 8 | Nos |
181 | 1.0181 | 085 Woodeen cup board Wooden lockers damaged at various locations to be repaired/renewed | Item no 181 | 6 | Nos |
182 | 1.0182 | 086 Sofa Sofa cushion torned in ED ,Master and crew rest room , to be renewed. | Item no 182 | 3 | Nos |
183 | 1.0183 | 087 Panneling SS panneling at indicated locations damged to be renewed. | Item no 183 | 50 | SQ Mtr |
184 | 1.0184 | 088 Water Purifier Provision Of Drinking Water Purifier of 9 Ltr Capacity For Domestic Use In Galley And Crew Dinning Hall. Work Also Involves Fitment, Piping Arrangement And Commissioning Of The System. –With 02 Set Of Spares Including Filter And Membrane. Work Includes Provisioning Of Following Spares Also :- (a) RO Membrane Welded -02 , (b) RO Membrane High Flow-02\n(c) Inline Carbon filter-02 ,(d) Inline Sediment Filter- 02 ,\n(e) Activated Carbon Filter (Excel Elite) , (f) Post Carbon Filter-02\n | Item no 184 | 1 | No’s |
185 | 1.0185 | 089 Water Cooler Serviceability checks of water cooler in crew dining hall is to be carried out.capacity-20 ltr | Item no 185 | 1 | No’s |
186 | 1.0186 | 090 Fixed H2s Sensor Provision of Fixed H2S sensors in the vicinity of STP compartment. (OEM - Hi-Point Services Pvt. Ltd.) Including installation of sensors and control pannel. Note:- Trial report along with H2S sensors calibration certificate by OEM to be submitted. | Item no 186 | 2 | Nos |
187 | 1.0187 | 091 Portable H2S Sensors. Provision of Portable H2S sensors . (OEM - Hi-Point Services Pvt. Ltd.) Note:- Trial report alongwith H2S sensors calibration certificate by OEM to be submitted. | Item no 187 | 1 | Nos |
188 | 1.0188 | 092 Bunk Bunk in crew rest room / master room damaged to be repaired | Item no 188 | 4 | Nos |
189 | 1.0189 | 093 Panelling panelling in living spaces/whell house and other areas , damaged at varios locations , to be renewed/repaired. Mat Sunmica | Item no 189 | 20 | sqm |
190 | 1.019 | ENGINEERING WORK PACKAGE\nCLASS AUTHORITY : IRS NOTE : ALL DEFECTS RELATED TO SR-19 OF TUG SAHAYAK WILL BE UNDER SUPERVISION OF IRS.\n\n1001 \nEQPT:FIRE/BILGE PUMP \nMAKE : BE PUMPS,TYPE-CETRIFUGAL SELF PRIMING MOTOR DRIVEN, MODEL- MA843KKS-6-316-MS3, CAP: 30 CMH | Item no 190 | 2 | FIRM NOT TO QUOTE |
191 | 1.0191 | 1001 EQPT:FIRE/BILGE PUMP (1) Carry out overhauling of Pump as per maker's instruction manual. (a) Dismantle pump completely. (b) Examine all parts for wear & tear,renew worned out parts (c) Renew Mechanical seal & bearings. | Item no 191 | 2 | Nos |
192 | 1.0192 | 1001 EQPT:FIRE/BILGE PUMP (2) Suction and discharge pressure gauges to be calibrated. range 0-120 psi and 30”-30psi and renewed with (Glecerin filled) | Item no 192 | 4 | Nos |
193 | 1.0193 | 1001 EQPT:FIRE/BILGE PUMP (3) Renew Instrumentation gauge pipes with suitable end fittings . mat: CuNi dia:1/4” ( If required) | Item no 193 | 4 | Rmts |
194 | 1.0194 | 1001 EQPT:FIRE/BILGE PUMP (4) Rectify lekages in self priming unit ,renew flexible hoses if required size 15mm | Item no 194 | 2 | Nos |
195 | 1.0195 | 1001 EQPT:FIRE/BILGE PUMP (5) Renew three jaw coupling & rubber spider coupling between pump & motor. | Item no 195 | 2 | Nos |
196 | 1.0196 | 1001 EQPT:FIRE/BILGE PUMP (6) Coupling/Belt Guard to be renewed / Manufactured, If perished. | Item no 196 | 1 | Nos |
197 | 1.0197 | 1001 EQPT:FIRE/BILGE PUMP (7) Carry out alignment of pump with motor and prove for satisfactory performance with general Fire & bilge system. | Item no 197 | 2 | Nos |
198 | 1.0198 | 1002 EQPT: GS PUMP MAKE : BE PUMPS,TYPE-CETRIFUGAL SELF PRIMING MOTOR DRIVEN, MODEL- MA843KKS-6-316-MS3, CAP: 35CMH | Item no 198 | 2 | FIRM NOT TO QUOTE |
199 | 1.0199 | 1002 EQPT: GS PUMP (1) Carry out overhauling of Pump as per maker's instruction manual. (a) Dismantle pump completely. (b) Examine all parts for wear & tear,renew worned out parts (c) Renew Mechanical seal & bearings. | Item no 199 | 2 | Nos |
200 | 1.02 | 1002 EQPT: GS PUMP (2) Suction and discharge pressure gauges to be calibrated. range 0-120 psi and 30”-30psi and renewed with (Glecerin filled) | Item no 200 | 2 | Nos |
201 | 1.0201 | 1002 EQPT: GS PUMP (3) Renew Instrumentation gauge pipes with suitable end fittings . mat: CuNi dia:1/4” ( If required) | Item no 201 | 4 | Rmts |
202 | 1.0202 | 1002 EQPT: GS PUMP (4) Rectify lekages in self priming unit ,renew flexible hoses if required size 15mm | Item no 202 | 2 | Nos |
203 | 1.0203 | 1002 EQPT: GS PUMP (5) Renew three jaw coupling & rubber spider coupling between pump & motor. | Item no 203 | 2 | Nos |
204 | 1.0204 | 1002 EQPT: GS PUMP (6) Coupling/Belt Guard to be renewed / Manufactured, If perished. | Item no 204 | 1 | Nos |
205 | 1.0205 | 1002 EQPT: GS PUMP (7) Carry out alignment of pump with motor and prove for satisfactory performance with general Fire & bilge system. | Item no 205 | 1 | Nos |
206 | 1.0206 | 1003 EQPT: VOITH COOLING WATER PUMPS MAKE: BEST&CROMPTON PUMPS, TYPE-CETRIFUGAL MOTOR DRIVEN,MODEL-CNW 100-200 (FIRM NOT TO QUOTE) MAKE: BEST&CROMPTON PUMPS, TYPE-CETRIFUGAL MOTOR DRIVEN,MODEL-CNW 100-200 | Item no 206 | 2 | FIRM NOT TO QUOTE |
207 | 1.0207 | 1003 EQPT: VOITH COOLING WATER PUMPS (1) Carry out overhauling of Pump as per maker's instruction manual. (a) Dismantle pump completely. (b) Examine all parts for wear & tear,renew worned out parts (c) Renew Mechanical seal & bearings. | Item no 207 | 2 | Nos |
208 | 1.0208 | 1003 EQPT: VOITH COOLING WATER PUMPS (2) Suction and discharge pressure gauges to be calibrated. range 0-120 psi and 30”-30psi and renewed . (Glecerin filled gauges) | Item no 208 | 4 | Nos |
209 | 1.0209 | 1003 EQPT: VOITH COOLING WATER PUMPS (3) Renew Instrumentation gauge pipes with suitable end fittings . mat: CuNi dia:1/4” ( If required) | Item no 209 | 8 | Rmtrs |
210 | 1.021 | 1003 EQPT: VOITH COOLING WATER PUMPS (4) Rectify lekages in self priming unit ,renew flexible hoses if required size 15mm | Item no 210 | 2 | Nos |
211 | 1.0211 | 1003 EQPT: VOITH COOLING WATER PUMPS (5) Renew three jaw coupling & rubber spider coupling between pump & motor. | Item no 211 | 2 | Nos |
212 | 1.0212 | 1003 EQPT: VOITH COOLING WATER PUMPS (6) Coupling/Belt Guard to be renewed / Manufactured, If perished. | Item no 212 | 2 | Sets |
213 | 1.0213 | 1003 EQPT: VOITH COOLING WATER PUMPS (7) Carry out alignment of pump with motor and prove for satisfactory performance with general Fire & bilge system. | Item no 213 | 2 | Nos |
214 | 1.0214 | 1004 EQPT: DOMESTIC FRESH WATER PUMPS MAKE: BE PUMPS, TYPE-CETRIFUGAL SELF PRIMING MOTOR DRIVEN,MODEL- A01210K-1B-304-WCF-MS3, Cap: 1 CMH | Item no 214 | 2 | FIRM NOT TO QUOTE |
215 | 1.0215 | 1004 EQPT: DOMESTIC FRESH WATER PUMPS (1) Carry out overhauling of Pump as per maker's instruction manual. (a) Dismantle pump completely. (b) Examine all parts for wear & tear,renew worned out parts (c) Renew Mechanical seal & bearings. | Item no 215 | 2 | Nos |
216 | 1.0216 | 1004 EQPT: DOMESTIC FRESH WATER PUMPS (2) Suction and discharge pressure gauges to be calibrated. range 0-120 psi and 30”-30psi and renewed with (Glecerin filled) | Item no 216 | 4 | Nos |
217 | 1.0217 | 1004 EQPT: DOMESTIC FRESH WATER PUMPS (3) Renew Instrumentation gauge pipes with suitable end fittings . mat: CuNi dia:1/4” ( If required) | Item no 217 | 4 | Nos |
218 | 1.0218 | 1004 EQPT: DOMESTIC FRESH WATER PUMPS (4) Rectify lekages in self priming unit ,renew flexible hoses if required size 15mm | Item no 218 | 8 | Rmtrs |
219 | 1.0219 | 1004 EQPT: DOMESTIC FRESH WATER PUMPS (5) Renew three jaw coupling & rubber spider coupling between pump & motor. | Item no 219 | 2 | No's |
220 | 1.022 | 1004 EQPT: DOMESTIC FRESH WATER PUMPS (6) Coupling/Belt Guard to be renewed / Manufactured, If perished. | Item no 220 | 2 | Nos |
221 | 1.0221 | 1004 EQPT: DOMESTIC FRESH WATER PUMPS (7) Carry out alignment of pump with motor and prove for satisfactory performance with general Fire & bilge system. | Item no 221 | 2 | Nos |
222 | 1.0222 | 1005 EQPT: SALVAGE PUMP MAKE: BEST & CROMPTON, MODEL- BWL 1525,TYPE: CENTIFUGAL, SELF PRIMING ENGINE DRIVEN,Cap: 200 CMH | Item no 222 | 1 | FIRM NOT TO QUOTE |
223 | 1.0223 | 1005 EQPT: SALVAGE PUMP (1) Carry out overhauling of Pump and renew parts if equired:-Dismantle pump completely. Examine all parts for wear. Renew shaft, impeller, mechanical seal, bearing, bearing bracket, bearing bushes, shaft sleeve, keys, gaskets, rubber bellow, where applicable. | Item no 223 | 1 | Nos |
224 | 1.0224 | 1005 EQPT: SALVAGE PUMP (2) Renew coupling pads, mechanical seal, bearings, grease cups,and worn out parts. | Item no 224 | 1 | Nos |
225 | 1.0225 | 1005 EQPT: SALVAGE PUMP (3) Suction and discharge pressure gauges(Glecerin filled) to be renewed. Range 30”-0” & 0-100psi | Item no 225 | 2 | Nos |
226 | 1.0226 | 1005 EQPT: SALVAGE PUMP (4) Instrumentation gauges pipes with suitable end fittings to be renewed. mat: CuNi dia:1/4” | Item no 226 | 4 | Rmtrs |
227 | 1.0227 | 1005 EQPT: SALVAGE PUMP (5) Coupling Guard to be renewed / Manufactured | Item no 227 | 1 | Nos |
228 | 1.0228 | 1005 EQPT: SALVAGE PUMP (6) Carry out alignment of pump with motor and Pump to be proved for satisfactory performance post work completion.. | Item no 228 | 1 | Nos |
229 | 1.0229 | 1006 EQPT : FUEL OIL TRANSFER PUMP MAKE : RAYSONS, MODEL-RGP 2 MT ,TYPE: ROTARY GEAR PUMP, CAP: 02 CMH | Item no 229 | 1 | FIRM NOT TO QUOTE |
230 | 1.023 | 1006 EQPT : FUEL OIL TRANSFER PUMP (1) Carry out overhauling of Pump and renew parts if equired:-Dismantle pump completely. Examine all parts for wear. Renew shaft, Drive and idler Gears, mechanical seal, bearing, bearing bracketr, bearing bushes, shaft sleeve, keys, gaskets etc. | Item no 230 | 1 | Nos |
231 | 1.0231 | 1006 EQPT : FUEL OIL TRANSFER PUMP (2) Suction and discharge pressure gauges(Glecerin filled) to be renewed if declared BER. range 30”-0” and 0-07 bar | Item no 231 | 2 | Nos |
232 | 1.0232 | 1006 EQPT : FUEL OIL TRANSFER PUMP (3) Overhaul & reset relief valve.(set pr.-5Kg/cm2) | Item no 232 | 1 | Nos |
233 | 1.0233 | 1006 EQPT : FUEL OIL TRANSFER PUMP (4) Coupling Guard to be renewed / Manufactured if required. | Item no 233 | 1 | Nos |
234 | 1.0234 | (5) Instrumentation gauges pipes with suitable end fittings to be renewed. if required. mat: CuNi dia:1/4” | Item no 234 | 2 | Rmtrs |
235 | 1.0235 | 1006 EQPT : FUEL OIL TRANSFER PUMP (6) Carry out alignment of pump with motor andPump to be proved for satisfactory performance post work completion. | Item no 235 | 2 | Nos |
236 | 1.0236 | 1007 EQPT : EXTERNAL FIRE FIGHTING PUMP MAKE : JASON ENGINEERING AS, POWER CONSUMPTION 772 KW, PUMP, CAP: 1500 CMH | Item no 236 | 2 | FIRM NOT TO QUOTE |
237 | 1.0237 | 1007 EQPT : EXTERNAL FIRE FIGHTING PUMP (1) Carry out overhauling of Pump and renew parts if equired:-Dismantle pump completely. Examine all parts for wear. Renew shaft, impeller, mechanical seal, bearing, bearing bracket, bearing bushes, shaft sleeve, keys, gaskets, rubber bellow, where applicable. | Item no 237 | 2 | Nos |
238 | 1.0238 | 1007 EQPT : EXTERNAL FIRE FIGHTING PUMP (2) Renew coupling pads, mechanical seal, bearings, grease cups,and worn out parts. | Item no 238 | 4 | Nos |
239 | 1.0239 | 1007 EQPT : EXTERNAL FIRE FIGHTING PUMP (3) Suction and discharge pressure gauges(Glecerin filled) to be renewed. Range 30”-0” & 0-100psi | Item no 239 | 2 | Nos |
240 | 1.024 | 1007 EQPT : EXTERNAL FIRE FIGHTING PUMP (4) Instrumentation gauges pipes with suitable end fittings to be renewed. mat: CuNi dia:1/4” | Item no 240 | 2 | Nos |
241 | 1.0241 | 1007 EQPT : EXTERNAL FIRE FIGHTING PUMP (5) Coupling Guard to be renewed / Manufactured | Item no 241 | 4 | Rmtrs |
242 | 1.0242 | 1007 (a) EQPT : FIFI PUMP POWER TAKE OFF ASSEMBLY PUMPS : EUREKA PUMPS 250X350 DGF, MODEL DF A6468-000, 182.02, 45TMB1480958 REDUCTION GEAR BOX: MAKE - JASON ENGG, MODEL - 255VK-1.12-CCW-02, SL NO-1881-56-11 | Item no 242 | 1 | FIRM NOT TO QUOTE |
243 | 1.0243 | 1007\n(a) EQPT : FIFI PUMP POWER TAKE OFF ASSEMBLY (1) Check and inspection the gear mechanism/tooth of gear box. | Item no 243 | 2 | Nos |
244 | 1.0244 | 1007\n (a) EQPT : FIFI PUMP POWER TAKE OFF ASSEMBLY (2)Check and inspection bearings of gear box.if found defective to be Replaced. | Item no 244 | 2 | Nos |
245 | 1.0245 | 1007\n (a)\nEQPT : FIFI PUMP POWER TAKE OFF ASSEMBLYCheck the perfomance of clutch-in & declutch mechanism with pneumatic valves. | Item no 245 | 2 | Nos |
246 | 1.0246 | 1007\n (a)\nEQPT : FIFI PUMP POWER TAKE OFF ASSEMBLY (3)Renew gear box oil with fresh oil. HP 90. ( supplied by Firm) | Item no 246 | 10 | ltrs |
247 | 1.0247 | 1007 \n(a)\nEQPT : FIFI PUMP POWER TAKE OFF ASSEMBLY (4)Carry out alignment of pump with power take off assembly & engine. | Item no 247 | 2 | Nos |
248 | 1.0248 | 1007 \n(a)\nEQPT : FIFI PUMP POWER TAKE OFF ASSEMBLY (5)Pump to be proved for satisfactory perfomance post work completion. | Item no 248 | 2 | Nos |
249 | 1.0249 | 1008 EQPT: PORTABLE SUBMERSIBLE BILGE / FIRE PUMPS MAKE : MODI INDUSTRIES (FC), Model- M-120 NM,,Capacity- 20 TPH | Item no 249 | 1 | FIRM NOT TO QUOTE |
250 | 1.025 | 1008 EQPT: PORTABLE SUBMERSIBLE BILGE / FIRE PUMPS (1) Submersible pump to be overhauled, and Pump to be proved for satisfactory performance post work completion. | Item no 250 | 2 | Nos |
251 | 1.0251 | 1008 EQPT: PORTABLE SUBMERSIBLE BILGE / FIRE PUMPS (2) If declared BER , to be procured and provided for stand by / Emergency pumping out of bilge systems(with hoses, dia-100 mm, length- 25 meter). | Item no 251 | 1 | Nos |
252 | 1.0252 | 1009 EQPT: PORTABLE NON SUBMERSIBLE PUMPS MAKE : MODI INDUSTRIES (FC), DIESEL ENGINE DRIVEN Model- DC-8Y-DE,,Capacity- 37 TPH | Item no 252 | 1 | FIRM NOT TO QUOTE |
253 | 1.0253 | 1009 EQPT: PORTABLE NON SUBMERSIBLE PUMPS (1) Non Submersible pump to be overhauled including its engine part, Pump to be proved for satisfactory performance post work completion. , | Item no 253 | 1 | Nos |
254 | 1.0254 | 1010 EQPT: PORTABLE SUBMERSIBLE SALVAGE PUMPS MAKE : MODI INDUSTRIES (FC), Model- M-504 NM,,Capacity- 40 TPH | Item no 254 | 1 | FIRM NOT TO QUOTE |
255 | 1.0255 | 1010 EQPT: PORTABLE SUBMERSIBLE SALVAGE PUMPS (1) Pumps to be overhauled,Pump to be proved for satisfactory performance post work completion. if declared BER , to be procured and provided for stand by / Emergency pumping out of bilge systems(with hoses, dia-100 mm, length- 25 meter). | Item no 255 | 1 | Nos |
256 | 1.0256 | 1011 EQPT: PORTABLE SUBMERSIBLE FIRE PUMP MAKE : MODI INDUSTRIES (FC), Model- M-554 NT,,Capacity- 100 TPH | Item no 256 | 1 | FIRM NOT TO QUOTE |
257 | 1.0257 | 1011 EQPT: PORTABLE SUBMERSIBLE FIRE PUMP (1) Submersible pump to be overhauled, Pump to be proved for satisfactory performance post work completion. | Item no 257 | 1 | Nos |
258 | 1.0258 | 1012 EQPT: HAND PUMPS (E/R Bilge,FO,LO,FW,Forward Bilge) ( All pumps are Hard to Operate) MAKE: M/S WESTINDIA TRADERS | Item no 258 | 5 | FIRM NOT TO QUOTE |
259 | 1.0259 | 1012 EQPT: HAND PUMPS (1) Dismantle and Clean pumps internally, renew wear down parts if required. | Item no 259 | 5 | Nos |
260 | 1.026 | 1012 EQPT: HAND PUMPS (2) Renew Wooden handles of all pumps. | Item no 260 | 5 | Nos |
261 | 1.0261 | 1012 EQPT: HAND PUMPS (3) Pump to be boxed back and proved for satisfactory performance. | Item no 261 | 5 | Nos |
262 | 1.0262 | 1012 EQPT: HAND PUMPS (4) Pump Suction cocks to be overhauled | Item no 262 | 5 | Nos |
263 | 1.0263 | 1013 EQPT: DD COMPRESSOR ENGINE MAKE: HATZ DIESEL, MODEL- IB20 | Item no 263 | 1 | FIRM NOT TO QUOTE |
264 | 1.0264 | 1013 EQPT: DD COMPRESSOR ENGINE (1) Renew injector nozzle and calibrate Injector . | Item no 264 | 1 | Nos |
265 | 1.0265 | 1013 EQPT: DD COMPRESSOR ENGINE (2) Calibrate FIP and governor assembly . | Item no 265 | 1 | Nos |
266 | 1.0266 | 1013 EQPT: DD COMPRESSOR ENGINE (3) Drain Lub oil sump, Clean and charge with new oil supplied. | Item no 266 | 1 | Nos |
267 | 1.0267 | 1013 EQPT: DD COMPRESSOR ENGINE (4) Renew air filter element, fuel filter element, and lub oil filter element. | Item no 267 | 1 | Nos |
268 | 1.0268 | 1013 EQPT: DD COMPRESSOR ENGINE (5) Renew piston rings. | Item no 268 | 1 | Nos |
269 | 1.0269 | 1013 EQPT: DD COMPRESSOR ENGINE (6) Renew Exhaust silencers. | Item no 269 | 1 | Nos |
270 | 1.027 | 1013 EQPT: DD COMPRESSOR ENGINE (7) Chemical Cleaning of exhaust line.and renew insulation/lagging of the exhaust pipe. | Item no 270 | 15 | Rmtrs |
271 | 1.0271 | 1013 EQPT: DD COMPRESSOR ENGINE (8) Securing clamp of exhaust trunking. | Item no 271 | 6 | Nos |
272 | 1.0272 | 1013 EQPT: DD COMPRESSOR ENGINE (9) Engine to be proved for satisfactory performance along with compressor post work completion. | Item no 272 | 1 | Nos |
273 | 1.0273 | 1014 EQPT: AIR COMPRESSOR, MAKE : ATLAS COPCO MODEL-LT5-60KE (Main compressor),LT- 3-60Khe(DD compressor), TYPE: 2 STAGE RECIPROCATING TYPE,CAPACITY:- 12.4 CMH at 30 Bar Complete overhaul of compressors to be carried out including following jobs :- | Item no 273 | 2 | FIRM NOT TO QUOTE |
274 | 1.0274 | 1014 EQPT: AIR COMPRESSOR (1) Inspect both big end and small end bearings of connecting rod . Renew if recommended by QC. | Item no 274 | 4 | Nos |
275 | 1.0275 | 1014 EQPT: AIR COMPRESSOR , (2) Lub oil sump to be drained, Cleaned, renew the sight glass if required. and new oil to be charged in sump.(lub oil will be provided by the Navy) | Item no 275 | 2 | Nos |
276 | 1.0276 | 1014 EQPT: AIR COMPRESSOR (3) Piston rings to be renewed | Item no 276 | 4 | Nos |
277 | 1.0277 | 1014 EQPT: AIR COMPRESSOR (4) Luboil pressure gauge (glycerin filled) to be renewed.(0-100 psi) | Item no 277 | 2 | Nos |
278 | 1.0278 | 1014 EQPT: AIR COMPRESSOR (5) Air inlet filter element of compressor to be renewed | Item no 278 | 2 | Nos |
279 | 1.0279 | 1014 EQPT: AIR COMPRESSOR (6) Instrumentation gauges pipes with suitable end fittings to be renewed mat: CuNi dia:1/4” | Item no 279 | 6 | Rmtrs |
280 | 1.028 | 1014 EQPT: AIR COMPRESSOR (7) Suction and discharge pressure gauges(Glycerin filled) to be renewed. range 0-10 bar and 0-50 bar | Item no 280 | 2 | No's |
281 | 1.0281 | 1014 EQPT: AIR COMPRESSOR (8) Pressure switches to be calibrated (cut in 15 and cut out at 30 bar).if found defective same to be renewed. | Item no 281 | 2 | Nos |
282 | 1.0282 | 1014 EQPT: AIR COMPRESSOR (9) Oil separator of compressors to be Cleaned. | Item no 282 | 1 | Nos |
283 | 1.0283 | 1014 EQPT: AIR COMPRESSOR (10) Chemical Cleaning and pressure testing of air bottles to be carried out capacity: 500ltrs TP: 45 bar | Item no 283 | 2 | Nos |
284 | 1.0284 | 1014 EQPT: AIR COMPRESSOR (11) Relief valves on air bottles to be set to 48 bar. Clibrate the same.Renew if required. | Item no 284 | 2 | Nos |
285 | 1.0285 | 1014 EQPT: AIR COMPRESSOR (12) Renew air system cocks(dia 20mm) | Item no 285 | 8 | Nos |
286 | 1.0286 | 1014 EQPT: AIR COMPRESSOR (13) Lub oil pressure gauge to be renewed.range 0-4kg/cm2 | Item no 286 | 2 | Nos |
287 | 1.0287 | 1014 EQPT: AIR COMPRESSOR (14) Survey the condition of the foundation, renew if recommended by QC. | Item no 287 | 2 | Nos |
288 | 1.0288 | 1014 EQPT: AIR COMPRESSOR (15) Coupling/Belt Guard to be renewed / Manufactured if required. | Item no 288 | 2 | Nos |
289 | 1.0289 | 1014 EQPT: AIR COMPRESSOR (16) Check condition of shock and vibration mountings. Replace if necessary as per OEM specs. | Item no 289 | 2 | Nos |
290 | 1.029 | 1014 EQPT: AIR COMPRESSOR (17) Pressure test of the valves, renew if required Sea chest blow through isolating valve 12mm Ø globe | Item no 290 | 4 | Nos |
291 | 1.0291 | 1014 EQPT: AIR COMPRESSOR (18) Pressure test of the valves, renew if required Shore supply isolating valve 40mm Ø globe | Item no 291 | 2 | Nos |
292 | 1.0292 | 1014 EQPT: AIR COMPRESSOR (19) Pressure test of the valves, renew if required "Air to general usage" valves 12mm Ø globe | Item no 292 | 5 | Nos |
293 | 1.0293 | 1014 EQPT: AIR COMPRESSOR (19 a) " Air to sea chest main isolating valve" 30mm Ø globe | Item no 293 | 1 | Nos |
294 | 1.0294 | 1014 EQPT: AIR COMPRESSOR (20) Pressure test of the valves, renew if required Main Engine Air system relief valve. set pressure : 15 bar | Item no 294 | 2 | Nos |
295 | 1.0295 | 1014 EQPT: AIR COMPRESSOR (21) Pressure test of the valves, renew if required Main engine air Starting system reducer 40mm Ø, SP : 10 bar | Item no 295 | 2 | Nos |
296 | 1.0296 | 1014 EQPT: AIR COMPRESSOR ,(22) Pressure test of the valves, renew if required -Air bottles outlet to main engines 40mm Ø globe | Item no 296 | 2 | Nos |
297 | 1.0297 | 1014 EQPT: AIR COMPRESSOR (23) Pressure test of the valves, renew if required Compressor to be boxed back and carry out capacity trials of compressor. | Item no 297 | 2 | Nos |
298 | 1.0298 | 1015 EQPT/SYSTEM: SEWAGE TREATMENT PLANT MAKE/MODEL: M/S Wartsila Hamworthy, STA-2C, Cap 27 Persons Note : Firms to quote after on sight inspection of equipment / plant, \ncomplete STP system to be overhauled and proved, including all components, Pumps, compressor, all valves, guages, strainers, filters and renew all components declared BER, all tanks, system pipes to be cleaned, all chemicals / catalists to be charged amd complete system to be proved on completion of work | Item no 298 | 1 | FIRM NOT TO QUOTE |
299 | 1.0299 | 1015 EQPT/SYSTEM: SEWAGE TREATMENT PLANT (1) Surge tanks to be chemically Cleaned | Item no 299 | 2 | Nos |
300 | 1.03 | 1015 EQPT/SYSTEM: SEWAGE TREATMENT PLANT (2) Portable Compressor to be overhauled. | Item no 300 | 1 | Nos |
301 | 1.0301 | 1015 EQPT/SYSTEM: SEWAGE TREATMENT PLANT (3) Overboard pump to be overhauled. | Item no 301 | 1 | Nos |
302 | 1.0302 | 1015 EQPT/SYSTEM: SEWAGE TREATMENT PLANT (4) Ventury to be dismantled Cleaned internally and boxed back | Item no 302 | 1 | Nos |
303 | 1.0303 | 1015 EQPT/SYSTEM: SEWAGE TREATMENT PLANT (5) Inline strainer to be dismantled and strainer element to be renewed | Item no 303 | 2 | Nos |
304 | 1.0304 | 1015 EQPT/SYSTEM: SEWAGE TREATMENT PLANT (6) Air filter element to be renewed. | Item no 304 | 1 | Nos |
305 | 1.0305 | 1015 EQPT/SYSTEM: SEWAGE TREATMENT PLANT (7) Air regulator to be dismantled Cleaned and boxed up and set pressure to be set at range 1-150 psi | Item no 305 | 1 | Nos |
306 | 1.0306 | 1015 EQPT/SYSTEM: SEWAGE TREATMENT PLANT (8) Electro catalytic cell to be dismantled and acid Cleaned using 6%-10% solution of water and muriatic acid. | Item no 306 | 1 | Nos |
307 | 1.0307 | 1015 EQPT/SYSTEM: SEWAGE TREATMENT PLANT (9) All flexible hoses to be renewed | Item no 307 | 2 | Nos |
308 | 1.0308 | 1015 EQPT/SYSTEM: SEWAGE TREATMENT PLANT (10) Complete assembly and system pipe to be painted post work completion as per color code. | Item no 308 | 1 | NOs |
309 | 1.0309 | 1016 EQPT: HARBOUR DIESEL GENERATOR, MAKE: M/s KOEL ,MODEL: 4R1040T, 50 KVA (i) 1000 hourly routine is to be carried out on DG inclunding following jobs. | Item no 309 | 1 | FIRM NOT TO QUOTE |
310 | 1.031 | 1016 EQPT: HARBOUR DIESEL GENERATOR, (1) Carry out visual examination of engine for Cleanliness and leakages if any, rectify them. | Item no 310 | 1 | Nos |
311 | 1.0311 | 1016 EQPT: HARBOUR DIESEL GENERATOR, (2) Replace all v belts | Item no 311 | 3 | Nos |
312 | 1.0312 | 1016 EQPT: HARBOUR DIESEL GENERATOR, (3) Check valve clearance and adjust if reqd. | Item no 312 | 1 | Nos |
313 | 1.0313 | 1016 EQPT: HARBOUR DIESEL GENERATOR, (4) Check turbo charger for abnormal sound if any. | Item no 313 | 1 | Nos |
314 | 1.0314 | 1016 EQPT: HARBOUR DIESEL GENERATOR, (5) Change centrifuge filter and Replace it with sealing kit. | Item no 314 | 1 | Nos |
315 | 1.0315 | 1016 EQPT: HARBOUR DIESEL GENERATOR, (6)Change engine oil. | Item no 315 | 50 | ltrs |
316 | 1.0316 | 1016 EQPT: HARBOUR DIESEL GENERATOR, (7) Replace duplex lube oil filters. | Item no 316 | 2 | Nos |
317 | 1.0317 | 1016 EQPT: HARBOUR DIESEL GENERATOR, (8) Replace element of dry type air filter. | Item no 317 | 1 | Nos |
318 | 1.0318 | 1016 EQPT: HARBOUR DIESEL GENERATOR, (9) Replace duplex fuel filters | Item no 318 | 1 | Nos |
319 | 1.0319 | 1016 EQPT: HARBOUR DIESEL GENERATOR, (10) Change joint of rocker cover | Item no 319 | 1 | Nos |
320 | 1.032 | 1016 EQPT: HARBOUR DIESEL GENERATOR, (11) Coolant to be tooped up | Item no 320 | 1 | ltrs |
321 | 1.0321 | 1016 EQPT: HARBOUR DIESEL GENERATOR, (12) carry out perfomance trial post work completion. | Item no 321 | 1 | Nos |
322 | 1.0322 | 1017 EQPT:DIESEL GENERATOR, (1) Carry out visual examination of engine for Cleanliness and leakages if any.Rectify them. | Item no 322 | 2 | Nos |
323 | 1.0323 | 1017 EQPT:DIESEL GENERATOR (2)Check the valve clearance & adjust if required. | Item no 323 | 2 | Nos |
324 | 1.0324 | 1017 EQPT:DIESEL GENERATOR, (3)Clean sea water strainer. | Item no 324 | 2 | Nos |
325 | 1.0325 | 1017 EQPT:DIESEL GENERATOR, (4)Clean the heat exChanger internally. | Item no 325 | 2 | Nos |
326 | 1.0326 | 1017 EQPT:DIESEL GENERATOR, (5)Clean the centrifuge filter and Replace with sealing kit. | Item no 326 | 2 | Nos |
327 | 1.0327 | 1017 EQPT:DIESEL GENERATOR, (6) Change the engine lube oil. | Item no 327 | 40 | ltrs |
328 | 1.0328 | 1017 EQPT:DIESEL GENERATOR, (7)Replace the cartridge of duplex lube oil filter. | Item no 328 | 2 | Nos |
329 | 1.0329 | 1017 EQPT:DIESEL GENERATOR, (8)Replace the element of dry type air Cleaner. | Item no 329 | 2 | Nos |
330 | 1.033 | 1017 EQPT:DIESEL GENERATOR, (9) Replace the V belts. | Item no 330 | 2 | Nos |
331 | 1.0331 | 1017 EQPT:DIESEL GENERATOR, (10) Replace the cartridge of duplex fuel filter. | Item no 331 | 2 | Nos |
332 | 1.0332 | 1017 EQPT:DIESEL GENERATOR, (11) Change joint of rocker cover. | Item no 332 | 2 | Nos |
333 | 1.0333 | 1017 EQPT:DIESEL GENERATOR, (12) Top up the coolant. | Item no 333 | 100 | ltrs |
334 | 1.0334 | 1017 EQPT:DIESEL GENERATOR, (13) Replace fuel hoses. | Item no 334 | 2 | Nos |
335 | 1.0335 | 1017 EQPT:DIESEL GENERATOR, (14) Replace wire braded hoses. | Item no 335 | 2 | Nos |
336 | 1.0336 | 1017 EQPT:DIESEL GENERATOR, (15) Replace high pressure fuel pipes. | Item no 336 | 2 | Nos |
337 | 1.0337 | 1017 EQPT:DIESEL GENERATOR, (16) Replace the ' o' ring of the drain plug. | Item no 337 | 2 | Nos |
338 | 1.0338 | 1017 EQPT:DIESEL GENERATOR, (17) Replace the rubber hoses of charge air cooler inlet & outlet pipe. | Item no 338 | 2 | Nos |
339 | 1.0339 | 1017 EQPT:DIESEL GENERATOR, (18) Clean CAC and Replace with service kit. | Item no 339 | 2 | Nos |
340 | 1.034 | 1017 EQPT:DIESEL GENERATOR, (19) Replace the air Cleaner hose. | Item no 340 | 2 | Nos |
341 | 1.0341 | 1017 EQPT:DIESEL GENERATOR, (20) Disconnect the expansion bellow and Replace the joints. | Item no 341 | 2 | Nos |
342 | 1.0342 | 1017 EQPT:DIESEL GENERATOR, (21) Disconnect the lub oil inlet pipe to turbocharger.Replace the joints. | Item no 342 | 2 | Nos |
343 | 1.0343 | 1017 EQPT:DIESEL GENERATOR, (22) Disconnect the lube oil drain pipe to turbocharger. Replace the joint. | Item no 343 | 2 | Nos |
344 | 1.0344 | 1017 EQPT:DIESEL GENERATOR, (23) Replace the joint of turbo charger exhaust manifold. | Item no 344 | 2 | Nos |
345 | 1.0345 | 1017 EQPT:DIESEL GENERATOR, (24) Replace old joints of exhaust manifold. | Item no 345 | 2 | Nos |
346 | 1.0346 | 1017 EQPT:DIESEL GENERATOR, (25) Remove the sealing rings and Replace sealing rings of ex manifold. | Item no 346 | 2 | Nos |
347 | 1.0347 | 1017 EQPT:DIESEL GENERATOR, (26) Replace the sealing washers venting pipe of cylinder head. | Item no 347 | 2 | Nos |
348 | 1.0348 | 1017 EQPT:DIESEL GENERATOR, (27) Replace the joint of rocker supply oil pipe banjo. | Item no 348 | 2 | Nos |
349 | 1.0349 | 1017 EQPT:DIESEL GENERATOR, (28) Replace injector. | Item no 349 | 2 | Nos |
350 | 1.035 | 1017 EQPT:DIESEL GENERATOR, (29) Replace the nozzle sealing washers. | Item no 350 | 2 | Nos |
351 | 1.0351 | 1017 EQPT:DIESEL GENERATOR, (30) Replace the cylinder head bolts if length is increased beyond limit value. | Item no 351 | 2 | Nos |
352 | 1.0352 | 1017 EQPT:DIESEL GENERATOR, (31) Replace thermostat element | Item no 352 | 4 | Nos |
353 | 1.0353 | 1017 EQPT:DIESEL GENERATOR, (32) Replace the joint of oil sump. | Item no 353 | 2 | Nos |
354 | 1.0354 | 1017 EQPT:DIESEL GENERATOR, (33) Replace the joint of suction tube assembly. | Item no 354 | 2 | Nos |
355 | 1.0355 | 1017 EQPT:DIESEL GENERATOR, (34) Replace piston rings. | Item no 355 | 12 | Nos |
356 | 1.0356 | 1017 EQPT:DIESEL GENERATOR, (35) Replace the cylinder liner if bore has reached the wear limit. | Item no 356 | 12 | Nos |
357 | 1.0357 | 1017 EQPT:DIESEL GENERATOR, (36) Overhaul cylinder head. | Item no 357 | 2 | Nos |
358 | 1.0358 | 1017 EQPT:DIESEL GENERATOR, (37) Replace cylinder head gasket. | Item no 358 | 2 | Nos |
359 | 1.0359 | 1017 EQPT:DIESEL GENERATOR, (38) Replace All inlet and exhaust valves. | Item no 359 | 12 | Nos |
360 | 1.036 | 1017 EQPT:DIESEL GENERATOR, (39) Replace valve guides. | Item no 360 | 24 | Nos |
361 | 1.0361 | 1017 EQPT:DIESEL GENERATOR, (40) Replace inlet valve seat. | Item no 361 | 12 | Nos |
362 | 1.0362 | 1017 EQPT:DIESEL GENERATOR, (41) Replace exhaust valve seat. | Item no 362 | 12 | Nos |
363 | 1.0363 | 1017 EQPT:DIESEL GENERATOR, (42) Replace valve seals. | Item no 363 | 24 | Nos |
364 | 1.0364 | 1017 EQPT:DIESEL GENERATOR, (43) Replace valve collets. | Item no 364 | 24 | Nos |
365 | 1.0365 | 1017 EQPT:DIESEL GENERATOR, (44) Replace valve springs inner. | Item no 365 | 24 | Nos |
366 | 1.0366 | 1017 EQPT:DIESEL GENERATOR, (45) Replace valve springs outer. | Item no 366 | 24 | Nos |
367 | 1.0367 | 1017 EQPT:DIESEL GENERATOR, (46) Replace valve spring cup. | Item no 367 | 24 | Nos |
368 | 1.0368 | 1017 EQPT:DIESEL GENERATOR, (47) Replace connecting rod bolts. | Item no 368 | 24 | Nos |
369 | 1.0369 | 1017 EQPT:DIESEL GENERATOR, (48) Service sea water pump. | Item no 369 | 2 | Nos |
370 | 1.037 | 1017 EQPT:DIESEL GENERATOR, (49) Replace set of joints. | Item no 370 | 2 | Nos |
371 | 1.0371 | 1017 EQPT:DIESEL GENERATOR, (50) Replace set of 'o' rings. | Item no 371 | 2 | Nos |
372 | 1.0372 | 1017 EQPT:DIESEL GENERATOR, (51) Replace set of copper washers. | Item no 372 | 2 | Nos |
373 | 1.0373 | 1017 EQPT:DIESEL GENERATOR, (52) Replacement of all the hoses. | Item no 373 | 2 | Nos |
374 | 1.0374 | 1017 EQPT:DIESEL GENERATOR, (53) Check & caliberate engine sensors & switches and undertake safety Checks. | Item no 374 | 2 | Nos |
375 | 1.0375 | 1017 EQPT:DIESEL GENERATOR, (54) Replace fresh water pump. | Item no 375 | 2 | Nos |
376 | 1.0376 | 1017 EQPT:DIESEL GENERATOR, (55) Calibration of governor to be carried out | Item no 376 | 2 | Nos |
377 | 1.0377 | 1017 EQPT:DIESEL GENERATOR, (56) Replace fuel supply and return line fuel system. | Item no 377 | 2 | Nos |
378 | 1.0378 | 1017 EQPT:DIESEL GENERATOR, (57) Droop setting and load trials. | Item no 378 | 2 | Nos |
379 | 1.0379 | 1017 EQPT:DIESEL GENERATOR, (58) Safety guard of S/W and FW pump drive deteriorated.to be renewed.Mat: MS,area to be protected 2 mt sq,width:100mm | Item no 379 | 2 | Nos |
380 | 1.038 | 1018 \nEQPT : VALVES Following valves to be overhauled, repaired and pressure tested. Up to 1.5 times working pressure. Job includes renewal of 10% BER valaves if any. ENGINE ROOM SEA WATER COOLING ME ,DG,VOITH, GS PUMP SYSTEMS | Item no 380 | 1 | FIRM NOT TO QUOTE |
381 | 1.0381 | 1018 EQPT : VALVES (1) Main Sea Chest Gate Valves, 200 mm | Item no 381 | 4 | Nos |
382 | 1.0382 | 1018 EQPT : VALVES (2) ME cooling and Voith suction Valves, Gate vv, 100 mm | Item no 382 | 4 | Nos |
383 | 1.0383 | 1018 EQPT : VALVES (3) Voith discharge vv,SD, 80 mm | Item no 383 | 2 | Nos |
384 | 1.0384 | 1018 EQPT : VALVES (4) DG seawater supply and dis valves, SD, 50 mm | Item no 384 | 4 | Nos |
385 | 1.0385 | 1018 EQPT : VALVES (5) DG overboard angle SDNR valves, 50 mm | Item no 385 | 2 | Nos |
386 | 1.0386 | 1018 EQPT : VALVES (6) MEoverboard & angle SDNR valves, 100 mm | Item no 386 | 2 | Nos |
387 | 1.0387 | 1018 EQPT : VALVES (7) GS pump suction chest (02) valves, SD, 65mm, | Item no 387 | 7 | Nos |
388 | 1.0388 | 1018 EQPT : VALVES (8) GS pump Discharge vv, SSDNR, 65mm | Item no 388 | 4 | Nos |
389 | 1.0389 | 1018 EQPT : VALVES (9) GS pump overboard vv, Angle SDNR, 65mm | Item no 389 | 2 | Nos |
390 | 1.039 | 1018 EQPT : VALVES (10) GS pump vv to firemain and isolating, Gate&SDNR, 65mm | Item no 390 | 2 | Nos |
391 | 1.0391 | 1018 EQPT : VALVES (11) Engine seachest vent valves, Angle, 80mm | Item no 391 | 2 | Nos |
392 | 1.0392 | 1018 EQPT : VALVES (12) FIREMAIN SYSTEM ,Fire hydrant valves, 65 mm | Item no 392 | 5 | Nos |
393 | 1.0393 | 1018 EQPT : VALVES (13) FIREMAIN SYSTEM, fire hydrant chests valves | Item no 393 | 8 | Nos |
394 | 1.0394 | 1018 EQPT : VALVES (14) FIREMAIN SYSTEM,Fire sea chest vent valves,SD, 80 m, | Item no 394 | 3 | Nos |
395 | 1.0395 | 1018 EQPT : VALVES (15) FIREMAIN SYSTEM, Gate valves, 40 mm | Item no 395 | 4 | Nos |
396 | 1.0396 | 1018 EQPT : VALVES (16) FIREMAIN SYSTEM, Gate valves, 65 mm | Item no 396 | 1 | Nos |
397 | 1.0397 | 1018 EQPT : VALVES (17) FIREMAIN SYSTEM, Foam supply line valves, SD, Gate, 50 mm | Item no 397 | 2 | Nos |
398 | 1.0398 | 1018 EQPT : VALVES (18) AIR SYSTEM, Air system cocks( bottle in and outlet), 50 mm | Item no 398 | 4 | Nos |
399 | 1.0399 | 1018 EQPT : VALVES (19) AIR SYSTEM, Air system valves (Statring motor), 50 mm | Item no 399 | 2 | Nos |
400 | 1.04 | 1018 EQPT : VALVES (20) AIR SYSTEM, Air system Valves, SD, 20 mm | Item no 400 | 4 | Nos |
401 | 1.0401 | 1018 EQPT : VALVES (21) AIR SYSTEM, Air system Valves, angle, 20 mm | Item no 401 | 2 | Nos |
402 | 1.0402 | 1018 EQPT : VALVES (22) AIR SYSTEM, Air system relief Valves, SD, 20 mm | Item no 402 | 2 | Nos |
403 | 1.0403 | 1018 EQPT : VALVES (23) AIR SYSTEM, Air reducer 20 mm and 40mm | Item no 403 | 4 | Nos |
404 | 1.0404 | 1018 EQPT : VALVES (24) FUEL SYSTEM Main Quick shut off ( storage /RU tank outlet to ME/DG) valves, SD, 50 mm | Item no 404 | 5 | Nos |
405 | 1.0405 | 1018 EQPT : VALVES (25) FUEL SYSTEM Angle vv, 32mm | Item no 405 | 1 | Nos |
406 | 1.0406 | 1018 EQPT : VALVES (26) FUEL SYSTEM SD valves, 32mm | Item no 406 | 2 | Nos |
407 | 1.0407 | 1018 EQPT : VALVES (27) FUEL SYSTEM Fuel seperator valves, SD, 20 mm | Item no 407 | 2 | Nos |
408 | 1.0408 | 1018 EQPT : VALVES (28) FRESH WATER SYSTEM Suction ,discharge and filling vvs, of FW Pump,Tank and Hand pp SD, 65mm | Item no 408 | 2 | Nos |
409 | 1.0409 | 1018 EQPT : VALVES (29) VOITH SYSTEM inlet outlet of coolers, SD, 40mm | Item no 409 | 4 | Nos |
410 | 1.041 | 1018 EQPT : VALVES (30) VOITH SYSTEM Overboard valves, Angle SDNR, 65mm | Item no 410 | 2 | Nos |
411 | 1.0411 | 1019 EQPT: STRAINERS, Following system strainers to be manufactured as per sample material: brass | Item no 411 | 1 | FIRM NOT TO QUOTE |
412 | 1.0412 | 1019 EQPT: STRAINERS, Following system strainers to be manufactured as per sample material: brass, \n(1) Main sea water supply manifold strainers | Item no 412 | 4 | Nos |
413 | 1.0413 | 1019 EQPT: STRAINERS, Following system strainers to be manufactured as per sample material: brass (2) Main engine cooling water system strainers | Item no 413 | 4 | Nos |
414 | 1.0414 | 1019 EQPT: STRAINERS, Following system strainers to be manufactured as per sample material: brass \n(3) Main fire pump suction system strainers | Item no 414 | 4 | Nos |
415 | 1.0415 | 1020 EQPT: SEA WATER COOLERS, Following sea water system coolers to be chemically Cleaned, zinc plugs to be renewed, drain plugs to be Replaced with drain cocks of same size(mat. brass)and presuure tested, renew if declared BER. | Item no 415 | 1 | FIRM NOT TO QUOTE |
416 | 1.0416 | 1020 EQPT: SEA WATER COOLERS, Following sea water system coolers to be chemically Cleaned, zinc plugs to be renewed, drain plugs to be Replaced with drain cocks of same size(mat. brass)and presuure tested, renew if declared BER. (1) Voith sea water coolers | Item no 416 | 2 | Nos |
417 | 1.0417 | 1020 EQPT: SEA WATER COOLERS, Following sea water system coolers to be chemically Cleaned, zinc plugs to be renewed, drain plugs to be Replaced with drain cocks of same size(mat. brass)and presuure tested, renew if declared BER .(2) DA Sea water coolers | Item no 417 | 2 | Nos |
418 | 1.0418 | 1020 EQPT: SEA WATER COOLERS, Following sea water system coolers to be chemically Cleaned, zinc plugs to be renewed, drain plugs to be Replaced with drain cocks of same size(mat. brass)and presuure tested, renew if declared BER. (3) FiFipump gear box lub oil Sea water coolers | Item no 418 | 2 | Nos |
419 | 1.0419 | 1021 EQPT: SYSTEM PIPES Following sea water system pipes to be Removed chemically Cleaned, repaired, pressure tested and fitted back (Jobs includes renewal of approximately 20% of pipes if required ) Also quote for system lines along with all necessary joints etc. | Item no 419 | 1 | FIRM NOT TO QUOTE |
420 | 1.042 | 1021 EQPT: SYSTEM PIPES (1) ENGINE ROOM SEA WATER COOLING ME ,DG, GS PUMP SYSTEMS 200mm Ø sea water system pipes (Mat.- CuNi) | Item no 420 | 20 | Rmtrs |
421 | 1.0421 | 1021 EQPT: SYSTEM PIPES (2) ENGINE ROOM SEA WATER COOLING ME ,DG, GS PUMP SYSTEMS100mm Ø sea water system pipes (Mat.- CuNi) | Item no 421 | 50 | Rmtrs |
422 | 1.0422 | 1021 EQPT: SYSTEM PIPES (3) ENGINE ROOM SEA WATER COOLING ME ,DG, GS PUMP SYSTEMS80mm Ø sea water system pipes (Mat.- CuNi) | Item no 422 | 50 | Rmtrs |
423 | 1.0423 | 1021 EQPT: SYSTEM PIPES (4) ENGINE ROOM SEA WATER COOLING ME ,DG, GS PUMP SYSTEMS60mm Ø sea water system pipes (Mat.- CuNi) | Item no 423 | 40 | Rmtrs |
424 | 1.0424 | 1021 EQPT: SYSTEM PIPES (5) ENGINE ROOM SEA WATER COOLING ME ,DG, GS PUMP SYSTEMS50mm Ø sea water system pipes (Mat. - CuNi) | Item no 424 | 65 | Rmtrs |
425 | 1.0425 | 1021 EQPT: SYSTEM PIPES (6) BILGE SYTEM 65mm Ø sea water system pipes (Mat. - CuNi) | Item no 425 | 4 | Rmtrs |
426 | 1.0426 | 1021 EQPT: SYSTEM PIPES (7) BILGE SYTEM 50mm Ø sea water system pipes (Mat.- CuNi) | Item no 426 | 10 | Rmtrs |
427 | 1.0427 | 1021 EQPT: SYSTEM PIPES (8) BILGE SYTEM 20mm Ø sea water system pipes (Mat.- CuNi) | Item no 427 | 4 | Rmtrs |
428 | 1.0428 | 1021 EQPT: SYSTEM PIPES (9) AIR SYSTEM 50mm Air bottles outlet pipe to main engines | Item no 428 | 5 | Rmtrs |
429 | 1.0429 | 1021 EQPT: SYSTEM PIPES (10) AIR SYSTEM 20mm air system pipes | Item no 429 | 10 | Rmtrs |
430 | 1.043 | 1021 EQPT: SYSTEM PIPES (11) AIR SYSTEM Flexible pipes to engine damaged, needs renewal. With end fittngs( for Air horn) | Item no 430 | 10 | Rmtrs |
431 | 1.0431 | 1021 EQPT: SYSTEM PIPES (12) FRESH WATER SYSTEM 30 mm Ø fresh water system pipes (Mat.-CuNi) | Item no 431 | 3 | Rmtrs |
432 | 1.0432 | 1021 EQPT: SYSTEM PIPES (13) FRESH WATER SYSTEM 20 mm Ø fresh water system pipes (Mat.-CuNi) | Item no 432 | 3 | Rmtrs |
433 | 1.0433 | 1021 EQPT: SYSTEM PIPES (14) VOITH SYSTEM inlet outlet of coolers, 40mm | Item no 433 | 4 | Rmtrs |
434 | 1.0434 | 1021 EQPT: SYSTEM PIPES (15) FUEL SYSTEM 40 mm Ø fuel system pipes (Mat:- MS) | Item no 434 | 5 | Rmtrs |
435 | 1.0435 | 1021 EQPT: SYSTEM PIPES (16) FUEL SYSTEM 20mm Ø fuel system pipes (Mat.-MS) | Item no 435 | 5 | Rmtrs |
436 | 1.0436 | 1021 EQPT: SYSTEM PIPES (17) FUEL SYSTEM 20mm Ø fuel filling pipes upto RU tanks by separator. (Mat.-MS) | Item no 436 | 5 | Rmtrs |
437 | 1.0437 | 1021 EQPT: SYSTEM PIPES (18) FUEL SYSTEM 200mm Ø sea water system pipes (Mat.- CuNi) | Item no 437 | 5 | Rmtrs |
438 | 1.0438 | 1021 EQPT: SYSTEM PIPES (19) FUEL SYSTEM 100mm Ø sea water system pipes (Mat.- CuNi) | Item no 438 | 15 | Rmtrs |
439 | 1.0439 | 1021 EQPT: SYSTEM PIPES (20) FUEL SYSTEM 50mm Ø sea water system pipes (Mat.- CuNi) | Item no 439 | 20 | Rmtrs |
440 | 1.044 | 1021 EQPT: SYSTEM PIPES (21) FUEL SYSTEM 65mm Ø sea water system pipes (Mat. - CuNi) | Item no 440 | 10 | Rmtrs |
441 | 1.0441 | 1021 EQPT: SYSTEM PIPES (22) FUEL SYSTEM 50mm Ø bilge water system pipes (Mat.- CuNi) | Item no 441 | 6 | Rmtrs |
442 | 1.0442 | 1021 EQPT: SYSTEM PIPES (23) FUEL SYSTEM 65mm Ø bilge water system pipes (Mat. - CuNi) | Item no 442 | 2 | Rmtrs |
443 | 1.0443 | 1021 EQPT: SYSTEM PIPES (24) FUEL SYSTEM 20mm Ø bilge water system pipes (Mat.- CuNi) | Item no 443 | 4 | Rmtrs |
444 | 1.0444 | 1022 EQPT: FOAM GUNS, MAKE: JASON, MODEL:FM200HJF-V-C-02, SL NO:1882-5217-3 | Item no 444 | 1 | FIRM NOT TO QUOTE |
445 | 1.0445 | 1022 EQPT: FOAM GUNS, MAKE: JASON, MODEL:FM200HJF-V-C-02, SL NO:1882-5217-3 External Fire fighting system to be proved for operation, Foam guns and other accessaries to be completely overhauled, fitted back and proved for satisfactory operation. All perished rubber fittings to be renewed. Make Jason Engg pvt ltd. | Item no 445 | 2 | Rmtrs |
446 | 1.0446 | 1023 EQPT: CO2 FIRE EXTINGUISHING SYSTEM MAKE: ZEAL Marketing Pvt Ltd, mumbai - 400104 | Item no 446 | 1 | FIRM NOT TO QUOTE |
447 | 1.0447 | 1023 EQPT: CO2 FIRE EXTINGUISHING SYSTEM MAKE: ZEAL Marketing Pvt Ltd, mumbai - 400104 \n(1) All CO2 cylinders to be weighed. If weight falls below the 10% of initial weight recharge the cylinders. Weight of the CO2 is 45kg each. | Item no 447 | 11 | Nos |
448 | 1.0448 | 1023 EQPT: CO2 FIRE EXTINGUISHING SYSTEM MAKE: ZEAL Marketing Pvt Ltd, mumbai - 400104 \n(2)CO2 cylinders of master control boxes to be Removed pressure tested and recharged. | Item no 448 | 2 | Nos |
449 | 1.0449 | 1023 EQPT: CO2 FIRE EXTINGUISHING SYSTEM MAKE: ZEAL Marketing Pvt Ltd, mumbai - 400104 (3)Non return valves (11 No's), QA valves (11 no's) , on cylinder heads to be overhauled. | Item no 449 | 22 | Nos |
450 | 1.045 | 1023 EQPT: CO2 FIRE EXTINGUISHING SYSTEM MAKE: ZEAL Marketing Pvt Ltd, mumbai - 400104 \n(4) Flexible hoses of the entire system to be pressure tested and replaced if required. | Item no 450 | 22 | Nos |
451 | 1.0451 | 1023 EQPT: CO2 FIRE EXTINGUISHING SYSTEM MAKE: ZEAL Marketing Pvt Ltd, mumbai - 400104 \n(5) All CO2 discharge multi jet nozzles in E/R to be opened, Checked for chockages, Cleaned and fitted back. (2.5mm & 2mm)(11&4) | Item no 451 | 15 | Nos |
452 | 1.0452 | 1023 EQPT: CO2 FIRE EXTINGUISHING SYSTEM MAKE: ZEAL Marketing Pvt Ltd, mumbai - 400104 \n(6) Overhaul of shuttle valve and relief valve assembly | Item no 452 | 1 | Nos |
453 | 1.0453 | 1023 EQPT: CO2 FIRE EXTINGUISHING SYSTEM MAKE: ZEAL Marketing Pvt Ltd, mumbai - 400104 \n(7) Overhaul of pressure operated switch. | Item no 453 | 1 | Nos |
454 | 1.0454 | 1023 EQPT: CO2 FIRE EXTINGUISHING SYSTEM MAKE: ZEAL Marketing Pvt Ltd, mumbai - 400104 \n(8) Complete drenching system piping to be blown through using HP air to prove system free of blockages. | Item no 454 | 1 | Nos |
455 | 1.0455 | 1023 EQPT: CO2 FIRE EXTINGUISHING SYSTEM MAKE: ZEAL Marketing Pvt Ltd, mumbai - 400104 \n(9) All CO2 cylinders and system pipes to be painted as per color coding post work completion. | Item no 455 | 11 | Nos |
456 | 1.0456 | 1023 EQPT: CO2 FIRE EXTINGUISHING SYSTEM MAKE: ZEAL Marketing Pvt Ltd, mumbai - 400104 \n(10) CO2 fire extinguish system alarm panel to be proved for operation. Renew defctive relays / solenoids /parts if any. And provr the system functionality with compressed air. | Item no 456 | 1 | Nos |
457 | 1.0457 | 1023 EQPT: CO2 FIRE EXTINGUISHING SYSTEM MAKE: ZEAL Marketing Pvt Ltd, mumbai - 400104 \n(11) Call bell for CO2 system in ECR found broken, to rectify. | Item no 457 | 1 | Nos |
458 | 1.0458 | 1024 EQPT: AIR SYSTEM RESERVOIRS | Item no 458 | 1 | FIRM NOT TO QUOTE |
459 | 1.0459 | 1024 EQPT: AIR SYSTEM RESERVOIRS (1) Air system reservoirs to be completely drained, and inspected. | Item no 459 | 2 | Nos |
460 | 1.046 | 1024 EQPT: AIR SYSTEM RESERVOIRS (2) All additional fittings on the reservoirs to be Checked for proper operation, renewed if required and tested.(including relief valves, drain valves, pr guages, pr guage isolating valves and piping etc) | Item no 460 | 2 | Nos |
461 | 1.0461 | 1025 EQPT:STARTING AIR MOTOR MAKE:- TDI TURBOSTART TWO, CAT ,PART NO 3829606 (PORT) RH CW | Item no 461 | 1 | FIRM NOT TO QUOTE |
462 | 1.0462 | 1025 EQPT:STARTING AIR MOTOR (1) Starting Air motors of Main Engine (Port) is defective not developing Torque, to be Replaced with new one. | Item no 462 | 1 | Nos |
463 | 1.0463 | 1026 EQPT:STARTING AIR MOTOR MAKE:- TDI TURBOSTART TWO, CAT ,PART NO 3982385 (STBD) LH CCW | Item no 463 | 1 | FIRM NOT TO QUOTE |
464 | 1.0464 | 1026 EQPT:STARTING AIR MOTOR (1)Starting Air motors of Main Engine (Stbd) is defective not developing Torque, to be Replaced with new one. | Item no 464 | 1 | Nos |
465 | 1.0465 | 1029 EQPT: MISCELLANEOUS | Item no 465 | 1 | FIRM NOT TO QUOTE |
466 | 1.0466 | 1029 EQPT: MISCELLANEOUS (1) All M/E instumentation / pressure gauge lines to be renewed. Mat cu ni. | Item no 466 | 20 | Rmtrs |
467 | 1.0467 | 1029 EQPT: MISCELLANEOUS (2) Both M/E fresh water cooler to be chemical Cleaned and presure tested to 1.5 times of operating pressure.. | Item no 467 | 2 | No's |
468 | 1.0468 | 1029 EQPT: MISCELLANEOUS (3) Both D/A exhaust line to be chemical Cleaned. | Item no 468 | 25 | Rmtrs |
469 | 1.0469 | 1029 EQPT: MISCELLANEOUS (2) Both M/E exhaust line to be chemical Cleaned | Item no 469 | 30 | Rmtrs |
470 | 1.047 | 1029 EQPT: MISCELLANEOUS (3) Portable pump to be repaired / renewed.Make:Johonson,Type: Centrifugal, 1Hp | Item no 470 | 2 | Nos |
471 | 1.0471 | 1029 EQPT: MISCELLANEOUS (4) Engine room work bench vise to be renewed along with foundation table. | Item no 471 | 1 | Nos |
472 | 1.0472 | 1029 EQPT: MISCELLANEOUS (5) Exhaust funnel to be Cleaned and painted internally. | Item no 472 | 2 | Nos |
473 | 1.0473 | 1029 EQPT: MISCELLANEOUS (6) Voith cooling pump Priming tank filling line diameter to be increased, job requires insitu drilling on priming tank and welding of 2'' pipe(length-10 cm) and to be fitted with cock. | Item no 473 | 2 | Nos |
474 | 1.0474 | 1029 EQPT: MISCELLANEOUS (7) Emergency cooling connection to voith cooling water system from general service sea water system, Job involves Manufacturing of 02 T pieces(50 mm) with flanges and piping length of 05 mtrs,(dia (50mm) and 02 screw down valves of 2''.location as convinient by Operators | Item no 474 | 1 | Nos |
475 | 1.0475 | 1029 EQPT: MISCELLANEOUS (8) Emergency cooling connection to DG cooling water system from general service sea water system, Job involves Manufacturing of 02 T pieces(50 mm) with flanges and piping length of 05 mtrs,(dia (50mm) and 02 screw down valves of 2''.location as convinient by Operators | Item no 475 | 1 | Nos |
476 | 1.0476 | 1029 EQPT: MISCELLANEOUS (9) Emergency cooling connection to Main Engine cooling water system from general service sea water system, Job involves Manufacturing of 02 T pieces(100 mm) with flanges and piping length of 05 mtrs,(dia (50mm) and 02 screw down valves of 4''.location as convinient by Operators. | Item no 476 | 1 | Nos |
477 | 1.0477 | 1029 EQPT: MISCELLANEOUS (10) Fuel transfer pump dischare to be provided with additional connection with valve to defuel the tanks to jetties. | Item no 477 | 1 | Nos |
478 | 1.0478 | 1029 EQPT: MISCELLANEOUS (11) M/E expansion tank to be chemical Cleaned & preserved with OM 30. | Item no 478 | 1 | Nos |
479 | 1.0479 | 1029 EQPT: MISCELLANEOUS (12) Fuel RU tank to be chemical Cleaned and preserved with OM 30. | Item no 479 | 1 | Nos |
480 | 1.048 | 1029 EQPT: MISCELLANEOUS (13) Quick closing valves not operating due loose wires including wire broken for ME RU tank (P&S), to be rectified. | Item no 480 | 5 | Nos |
481 | 1.0481 | 1029 EQPT: MISCELLANEOUS (14) Alarm monitoring system for ME & Auxiliary machineries in ECR found non operational, to be rectified. | Item no 481 | 1 | Nos |
482 | 1.0482 | 1029 EQPT: MISCELLANEOUS (15) Diesel driven Bilge pump found non operational. | Item no 482 | 1 | Nos |
483 | 1.0483 | 1029 EQPT: MISCELLANEOUS (16) Self closing cock for sounding pipe in ER found jammed, to rectify. | Item no 483 | 3 | Nos |
484 | 1.0484 | 1029 EQPT: MISCELLANEOUS (17) Various lekage in Air horn system to be rectified.Post rectify horn to be proved for satisfactory perfomance. | Item no 484 | 1 | Nos |
485 | 1.0485 | 1029 EQPT: MISCELLANEOUS (18) Level gauge i.w.o Lube oil,dirty oil & Bilge holding tanks to be provided as per IRS recomendetion. | Item no 485 | 3 | Nos |
486 | 1.0486 | 1029 EQPT: MISCELLANEOUS (19) Drip trays i.w.o FODS tank (P&S) and drain line end connection of LO purifier & FO purifier to be provided as per IRS recomendetion. | Item no 486 | 4 | Nos |
487 | 1.0487 | 1029 EQPT: MISCELLANEOUS (20) Drain line to be provided in exhaust line of DG(port,stbd & harbour) | Item no 487 | 3 | Nos |
488 | 1.0488 | 1029 EQPT: MISCELLANEOUS (21) Bilge high level alarm and emergency bilge suction remains pending to be shown. | Item no 488 | 1 | Nos |
489 | 1.0489 | 1030 EQPT : DIESEL GENERATOR, MAKE: M/s KOEL ,MODEL: 6R1080TA, 100 KVA & HARBOUR DIESEL GENERATOR,MAKE: M/s KOEL ,MODEL: 4R1040T, 50 KVA Calibrate the following cutouts as per their set points. Renew if defective D/G (Port, Stbd & Harbour ) AV alaram panel system to be completely overhauled,caliberated and prove for satisfactory operation inclunding following jobs:- | Item no 489 | 1 | FIRM NOT TO QUOTE |
490 | 1.049 | 1030 EQPT : DIESEL GENERATOR, (1) Fresh water temperature sensor Alarm. Set point 92°C | Item no 490 | 3 | Nos |
491 | 1.0491 | 1030 EQPT : DIESEL GENERATOR, (2) Fresh water temperature Tripping cut out Set point 97°C | Item no 491 | 3 | Nos |
492 | 1.0492 | 1030 EQPT : DIESEL GENERATOR, (3) Lub oil Pressure sensor for alarm set point 1.5 kg/sq cm | Item no 492 | 3 | Nos |
493 | 1.0493 | 1030 EQPT : DIESEL GENERATOR, (4) Lub oil pressure sensor for tripping set point 0.5 kg/sq cm | Item no 493 | 3 | Nos |
494 | 1.0494 | 1030 EQPT : DIESEL GENERATOR, (5) Over speed sensor for tripping set point 1650 rpm | Item no 494 | 3 | Nos |
495 | 1.0495 | 1030 EQPT : DIESEL GENERATOR, (6) High temperature of alternator for tripping set point 70°C\nNote: above repairs/ routines to be undertaken by OEM/ authorised firms of OEM | Item no 495 | 3 | Nos |
496 | 1.0496 | 1031 EQPT : FIRE FIGHTING PUMP REDUCTION GEARING / GEARBOX, Make : Jason Engg, Model :SRGO-255VK-1.12-CCW-02 | Item no 496 | 1 | FIRM NOT TO QUOTE |
497 | 1.0497 | 1031 EQPT : FIRE FIGHTING PUMP REDUCTION (1) FiFi pump reduction gearing / gear box, Engaging and disengaging mechanisim to be completely opened and overhauled, to be proved on completion along with Fire Fighting pump. | Item no 497 | 2 | Nos |
498 | 1.0498 | 1032 EQPT :VOITH PROPULSION , MAKE:VOITH TURBO SCHNEIDER PROPULSION, MODEL:VSP 21R5/150-2 | Item no 498 | 1 | FIRM NOT TO QUOTE |
499 | 1.0499 | 1032 EQPT :VOITH PROPULSION , (1) Inspect the screw joints. | Item no 499 | 2 | Nos |
500 | 1.05 | 1032 EQPT :VOITH PROPULSION , (2)Inspect the shaft sealing for leaks. | Item no 500 | 2 | Nos |
501 | 1.0501 | 1032 EQPT :VOITH PROPULSION , (3)Check the condition of blades. | Item no 501 | 2 | Nos |
502 | 1.0502 | 1032 EQPT :VOITH PROPULSION , (4)Inspect the axial clearance of blades. | Item no 502 | 2 | Nos |
503 | 1.0503 | 1032 EQPT :VOITH PROPULSION , (5)Inspect the condition of rotor casing coating & anodes. | Item no 503 | 2 | Nos |
504 | 1.0504 | 1032 EQPT :VOITH PROPULSION , (6)Check for any leaks in rotor casing. | Item no 504 | 2 | Nos |
505 | 1.0505 | 1032 EQPT :VOITH PROPULSION , (7)Inspect the input gear when the propeller is running. | Item no 505 | 2 | Nos |
506 | 1.0506 | 1032 EQPT :VOITH PROPULSION , (8)Check for any leaks in mounting cover. | Item no 506 | 2 | Nos |
507 | 1.0507 | 1032 EQPT :VOITH PROPULSION , (9)Check for lekage in propeller well. | Item no 507 | 2 | Nos |
508 | 1.0508 | 1032 EQPT :VOITH PROPULSION , (10)Inspect the condition of permanent magnet filter rods. | Item no 508 | 2 | Nos |
509 | 1.0509 | 1032 EQPT :VOITH PROPULSION , (11)Check the correct functioning of rotor space ventilation. | Item no 509 | 2 | Nos |
510 | 1.051 | 1032 EQPT :VOITH PROPULSION , (12)Change the sump oil with fresh oil. SP 150 | Item no 510 | 1200 | ltrs |
511 | 1.0511 | 1032 EQPT :VOITH PROPULSION , (13)Replace oil filter of system. | Item no 511 | 2 | Nos |
512 | 1.0512 | 1032 EQPT :VOITH PROPULSION , (14)Caliberate the pressure transducer.(p1,p2 &p3) | Item no 512 | 2 | Nos |
513 | 1.0513 | 1032 EQPT :VOITH PROPULSION , (15)Clean elevated oil tank of system. | Item no 513 | 2 | Nos |
514 | 1.0514 | 1033 EQPT : MAIN ENGINE, MAKE : CATERPILLAR, MODEL:3512C Running hours PME : 6040 hrs, SME: 6040hrs All 6000 hourly routines on main engine to be carried out | Item no 514 | 1 | FIRM NOT TO QUOTE |
515 | 1.0515 | 1033 EQPT : MAIN ENGINE (1) Air Starter Motor Lubricator oil to be changed | Item no 515 | 2 | Nos |
516 | 1.0516 | 1033 EQPT : MAIN ENGINE (2) Air Tank Moisture and Sediment Drain and recharge | Item no 516 | 2 | Nos |
517 | 1.0517 | 1033 EQPT : MAIN ENGINE (3) Control Panel Inspect and Test | Item no 517 | 2 | Nos |
518 | 1.0518 | 1033 EQPT : MAIN ENGINE (4) check and refill coolant level. | Item no 518 | 2 | Nos |
519 | 1.0519 | 1033 EQPT : MAIN ENGINE (5) Inspect and Replace Air Cleaner service indicator. | Item no 519 | 2 | Nos |
520 | 1.052 | 1033 EQPT : MAIN ENGINE (6) Air filter to be Replaced. | Item no 520 | 2 | Nos |
521 | 1.0521 | 1033 EQPT : MAIN ENGINE (7) Check oil filter differential pressure and Replace the oil filter. | Item no 521 | 2 | Nos |
522 | 1.0522 | 1033 EQPT : MAIN ENGINE (8) Change engine oil. | Item no 522 | 2 | Nos |
523 | 1.0523 | 1033 EQPT : MAIN ENGINE (9) Check fuel filter differential pressure and Replace the fuel filter. | Item no 523 | 2 | Nos |
524 | 1.0524 | 1033 EQPT : MAIN ENGINE (10) Change fuel primary filter. | Item no 524 | 2 | Nos |
525 | 1.0525 | 1033 EQPT : MAIN ENGINE (11) Check transmission oil level. | Item no 525 | 2 | Nos |
526 | 1.0526 | 1033 EQPT : MAIN ENGINE (12) Clean/ Inspect engine speed/timing sensor.if required to be Replaced. | Item no 526 | 2 | Nos |
527 | 1.0527 | 1033 EQPT : MAIN ENGINE (13) Check engine valve lash. | Item no 527 | 2 | Nos |
528 | 1.0528 | 1033 EQPT : MAIN ENGINE (14) Inspect and caliberate fuel injector. | Item no 528 | 2 | Nos |
529 | 1.0529 | 1033 EQPT : MAIN ENGINE (15) Inspect /adjust alternator belt adjustment.if required to be Replaced. | Item no 529 | 2 | Nos |
530 | 1.053 | 1033 EQPT : MAIN ENGINE (16) Change engine oil filter. | Item no 530 | 2 | Nos |
531 | 1.0531 | 1033 EQPT : MAIN ENGINE (17) Inspect and Replace hoses & clamps. | Item no 531 | 2 | Nos |
532 | 1.0532 | 1033 EQPT : MAIN ENGINE (18) Caliberate Air shutoff .if required to be Replaced. | Item no 532 | 2 | Nos |
533 | 1.0533 | 1033 EQPT : MAIN ENGINE (19) Clean crankcase breather.if required to be Changed. | Item no 533 | 2 | Nos |
534 | 1.0534 | 1033 EQPT : MAIN ENGINE (20) Replace fuel system secondary filter. | Item no 534 | 2 | Nos |
535 | 1.0535 | 1033 EQPT : MAIN ENGINE (21) Clean Air starting motor lubricator bowl. | Item no 535 | 2 | Nos |
536 | 1.0536 | 1033 EQPT : MAIN ENGINE (22) Inspect crankshaft vibration damper. | Item no 536 | 2 | Nos |
537 | 1.0537 | 1033 EQPT : MAIN ENGINE (23) Inspect engine mounts. | Item no 537 | 2 | Nos |
538 | 1.0538 | 1033 EQPT : MAIN ENGINE (24) Inspect turbocharger. | Item no 538 | 2 | Nos |
539 | 1.0539 | 1033 EQPT : MAIN ENGINE (25) Inspect auxiliary water pump.if required to be rectify. | Item no 539 | 2 | Nos |
540 | 1.054 | 1033 EQPT : MAIN ENGINE (26) remove and Check Air shutoff damper. | Item no 540 | 2 | Nos |
541 | 1.0541 | 1033 EQPT : MAIN ENGINE (27) Replace coolant temperature regulator. | Item no 541 | 2 | Nos |
542 | 1.0542 | 1033 EQPT : MAIN ENGINE (28) Inspect prelube pump.if found defective to be rectify. | Item no 542 | 2 | Nos |
543 | 1.0543 | 1033 EQPT : MAIN ENGINE (29) Inspect starting motor.if found abnormal to be rectify. | Item no 543 | 2 | Nos |
544 | 1.0544 | 1033 EQPT : MAIN ENGINE (30) Inspect water pump.if found defective to be rectify. | Item no 544 | 2 | Nos |
545 | 1.0545 | 1033 EQPT : MAIN ENGINE (31) Inspect camshaft roller followers. | Item no 545 | 2 | Nos |
546 | 1.0546 | 1033 EQPT : MAIN ENGINE (32) Inspect sea water pump.if found defective to be rectify. | Item no 546 | 2 | Nos |
547 | 1.0547 | 1033 EQPT : MAIN ENGINE (33) Fresh water cooler to be chemical Cleaned. | Item no 547 | 2 | Nos |
548 | 1.0548 | 1033 EQPT : MAIN ENGINE (34) Lub oil cooler to be chemical Cleaned. | Item no 548 | 2 | Nos |
549 | 1.0549 | 1033 EQPT : MAIN ENGINE (35) Air reducer to be caliberated.if required to be Replaced. | Item no 549 | 2 | Nos |
550 | 1.055 | 1033 EQPT : MAIN ENGINE (36) Freshwater coolers to be removed, completely dismentled, chemically cleaned and pressure tested. | Item no 550 | 2 | Nos |
551 | 1.0551 | 1034 EQPT : MAIN ENGINE, MAKE: CATERPILLAR, MODEL:3512C Following items to be required as spares for general maintenance of main engines:- | Item no 551 | 2 | FIRM NOT TO QUOTE |
552 | 1.0552 | 1034 EQPT : MAIN ENGINE, (1) Mechanical seal, Bearing, Shaft,impeller, Key for Voith cooling Pump | Item no 552 | 4 | Nos |
553 | 1.0553 | 1034 EQPT : MAIN ENGINE, (2)CAT coolant | Item no 553 | 800 | ltrs |
554 | 1.0554 | 1034 EQPT : MAIN ENGINE, (3)CAT lub oil | Item no 554 | 1600 | ltrs |
555 | 1.0555 | 1034 EQPT : MAIN ENGINE, (4)Air filter | Item no 555 | 64 | Nos |
556 | 1.0556 | 1034 EQPT : MAIN ENGINE, (5)Lo filter | Item no 556 | 120 | Nos |
557 | 1.0557 | 1034 EQPT : MAIN ENGINE, (6)Fuel filter | Item no 557 | 120 | Nos |
558 | 1.0558 | 1034 EQPT : MAIN ENGINE, (7)Fresh water cooler elements (plates) | Item no 558 | 2 | Nos |
559 | 1.0559 | \n ELECTRICAL WORK PACKAGE\n\nFIRM NOT TO QUOTE\nQUANTIFIED DEFECT LIST - SR 1 (DL) ELECTRICAL EQUIPMENT MOTORS.\n(A) BLOW THROUGH MOTOR WITH COMPRESSED AIR. CHECK INSULATION OF THE MOTOR, SHOULD NOT BE LESS THAN 2 M OHMS. \n(B) BEARINGS RENEWALS AT BOTH ENDS OF THE MOTOR.\n(C) INSPECT SHOCK MOUNTS, WASHERS, NUTS AND BOLT. CHECK FOUNDATIONS SECURING NUTS OF THE MOTOR FOR TIGHTNESS.\n1.Carryout compleat overhaul routines and proove them for satisfactory performance / Made operational \n2.Clean & Tighten the all connections with proper lugs, ferrules & connecters. \n3. Check all circuits continuities \n4.Check circuitry functions with control voltages | Item no 559 | 1 | FIRM NOT TO QUOTE |
560 | 1.056 | 2001 MSB SWITCH BOARD , OEM: Marine Electrical , Mumbai | Item no 560 | 1 | FIRM NOT TO QUOTE |
561 | 1.0561 | 2001 \nMSB SWITCH BOARD \n 01 no Switch board with common bus bar system with four incoming feeders from two DAs.one harbour DG & shore supply And these four are electrically interlocked & connected to the two bus bars which is connected by bus coupler in swbd. Make Marine Electrical , mumbai | Item no 561 | 1 | Switch board\nFIRM NOT TO QUOTE |
562 | 1.0562 | 2001 \n MSB SWITCH BOARD \n (B) Check performance of switchboard and associated switch gear during load trials of generator.\n(NOTE: ETMU to access the performance) | Item no 562 | 1 | Switchboard |
563 | 1.0563 | 2001\n MSB SWITCH BOARD \n (C) MSB to be overhauled (includes defective switches to be renwed, perished control wiring to be renewed with crimping of proper lugs, marking sleeves to be put on control wiring and loose wirng to be tied with cable ties) Carryout routines mentioned below and prove them for satisfactory performance (calibration certificates/test reports from NABL recognised Labs are to be submitted)\n\n\n\n . | Item no 563 | 1 | Switchboard |
564 | 1.0564 | 2001 \n MSB SWITCH BOARD \n (D) Renewal of MCCBs,make Schneider | Item no 564 | 1 | No |
565 | 1.0565 | 2001\n MSB SWITCH BOARD\n (E) Motor operated plug in type MCCB non ops. Renew Motor operated plug in type MCCB along with all its accessories. Rated:-415v,50 Hz,3phase, 250Amps. Make:schneider Model-NSX250B 3P LV431140 | Item no 565 | 2 | No's |
566 | 1.0566 | 2001 \nMSB SWITCH BOARD \n (F)Check ,Calibrate all parameters of advanced digital protection relays (generator protection ), & made operational.(presently it was not working) (CT ratio 200/5A,415V,50Hz,aux voltage 24DC,DI-DO supply unit.24V DC modbus communication port,Can Bus Redundant &with Governor O/P suitable for GAC make speed control unit model ESD 5200) Make:Stucke Electronik, Model: SYMAP-Y (G) | Item no 566 | 2 | No's |
567 | 1.0567 | 2001\nMSB SWITCH BOARD \n(G) Renew the advanced digital protection relays (generator protection ) unit, \n (CT ratio 200/5A,415V,50Hz,aux voltage 24DC,DI-DO supply unit.24V DC modbus communication port,Can Bus Redundant &with Governor O/P suitable for GAC make speed control unit model ESD 5200) Make:Stucke Electronik, Model: SYMAP-Y (G) | Item no 567 | 2 | Nos |
568 | 1.0568 | 2001\nMSB SWITCH BOARD\n(H) check & calibrate the synschroscope with check synchronising relay 380V-440V AC size 96X96,(rectify the fault if there is any fault(presently it was not working)) make:DEIF,Model:CSQ-3,415V,AC Marine | Item no 568 | 1 | Nos |
569 | 1.0569 | 2001\nMSB SWITCH BOARD \n (J) Rubber mat : Insulating Rubber Mat deteriorated. To be Renewed with high voltage Electrical rubber mat in front of MSB.(Thickness- 3mm) Make vardhaman model class c | Item no 569 | 20 | SQMTR |
570 | 1.057 | 2002 \nDGS Eqpt/System: Generators/Alternator Make:Stamford,415V,3Ph,50Hz,1500RPM,(100KVA-2nos,50KVA-1no) | Item no 570 | 1 | FIRM NOT TO QUOTE |
571 | 1.0571 | 2002 \nDGS Eqpt/System: Generators/Alternator\nCarryout routines mentioned below and prove them for satisfactory performance.(routine may be carried out with assistance of OEM or authorised Rep). | Item no 571 | 3 | Nos |
572 | 1.0572 | 2002\nDGSEqpt/System: Generators/Alternator\n(A) Overhaul the generators/alternator | Item no 572 | 3 | Nos |
573 | 1.0573 | 2002\nDGS Eqpt/System: Generators/Alternator \n (B) Check the insulation of Alternator with 500V Megger. The insulation resistance should not be less than 2 mega ohm. If less isolate the system and improve the insulation. Check inductance and capacitance of the alternator winding. | Item no 573 | 3 | Nos |
574 | 1.0574 | 2002\nDGS Eqpt/System: Generators/Alternator\n (C) Carryout varnishing of rotor and stator winding. | Item no 574 | 3 | Nos |
575 | 1.0575 | 2002\nDGS Eqpt/System: Generators/Alternator(\nD) Carryout balancing of rotor. | Item no 575 | 3 | Nos |
576 | 1.0576 | 2002 \nDGS Eqpt/System: Generators/Alternator \n(E) Inspection of Lugs, clean the lugs with zero paper and replace if damaged. | Item no 576 | 3 | Nos |
577 | 1.0577 | 2002 \n DGS Eqpt/System: Generators/Alternator\n(F) Check the condition \n(1) All sealing of the alternators, repaired if required.\n(2) Check the rotating rectifier assembly for any loose connection and check proper connection. | Item no 577 | 3 | Nos |
578 | 1.0578 | 2002\nDGS Eqpt/System: Generators/Alternator\n(G) Take SPM reading of DE/NDE bearing of alternators; carry out greasing by grease gun if required (yellow zone). Change the bearing if unset (red zone). | Item no 578 | 3 | Nos |
579 | 1.0579 | 2002\n DGS Eqpt/System: Generators/Alternator\n(H) Carryout alignment of Alternator and AVR | Item no 579 | 3 | Nos |
580 | 1.058 | 2002\n DGS Eqpt/System: Generators/Alternator \n(I) Renew the AVR (Aumatic Voltage Regulator) | Item no 580 | 2 | Nos |
581 | 1.0581 | 2002\nDGS Eqpt/System: Generators/Alternator \n(J) Renew the Diode set (6diodes with suppessor) RSK2001 | Item no 581 | 1 | Nos |
582 | 1.0582 | 2003\n DG TRAILS\n DG Load trails (SHIP LOAD | Item no 582 | 3 | FIRM NOT TO QUOTE |
583 | 1.0583 | 2003\n DG TRAILS \nPost repair/routines. Trials to be conducted as per details/ regimes mentioned below. Observations / Defects observed to be liquidated and Trials to be reconducted.(with ship load) Post completion of the routines/overhaul, the machinery should be proved to rated/designed power / capacity without limitations/observations and vibration levels at all points should be less than 5 mm/sec. The equipment performance will be considered satisfactory only if it the performance trials are cleared by Naval Inspection Agency. SPM readings of generator to be in green zone. Stable supply for communication, navigation and survey equipment to be proved under total power failure condition. (a) Insulation of Generator Rotor and Starter to be 10M Ohm (b) Frequency Range to be 49.5 - 50.5 (c) Rate of change of frequency permissble limit is 0.2 - 0.4 Hz/sec (d) Drop values limit is 3.5 - 4% (e) Peak variation of frequency to be 0-100%, 50-75%, 75-100%, 100-75% and 100-0% (f) 02 sec recovery should be at all regimes (g) Peak variation of voltage recovery to be in 01 sec for all regimes. (h) Difference between average of 3 line RMS value wrt Normal at 100% load to be proved. (i) M-Load trial to be offered. (j) Overvoltage and Undervoltage protection to be proved. | Item no 583 | 3 | nos |
584 | 1.0584 | 2004\n MOTORS \nEqpt:Motors / Blowers \ncarry out complete over hauling of the following motors (including blower parts for blowers) and prove for satisfactory operation. Renew the deffictive parts. | Item no 584 | 21 | FIRM NOT TO QUOTE |
585 | 1.0585 | 2004\nMOTORS\n(A) Carry out complete over hauling of the following motors (including blower parts for blowers) and prove for satisfactory operation. Renew the deffictive parts. Sea water pumps 415V,3Ø,20HP | Item no 585 | 1 | Nos |
586 | 1.0586 | 2004\nMOTORS\n(B) Carry out complete over hauling of the following motors (including blower parts for blowers) and prove for satisfactory operation. Renew the deffictive parts. Domesting FW pump motor 415V,3Ø,0.5HP | Item no 586 | 1 | Nos |
587 | 1.0587 | 2004\nMOTORS\n (C) Carry out complete over hauling of the following motors (including blower parts for blowers) and prove for satisfactory operation. Renew the deffictive parts. Engine room supply Blower motor 415v,3ph,50Hz,10HP. | Item no 587 | 1 | Nos |
588 | 1.0588 | 2004\nMOTORS\n(D) Carry out complete over hauling of the following motors (including blower parts for blowers) and prove for satisfactory operation. Renew the deffictive parts. Fire & Bilge service pumps 415V,3Ø,12.5HP | Item no 588 | 1 | Nos |
589 | 1.0589 | 2004\nMOTORS\n (E) Carry out complete over hauling of the following motors (including blower parts for blowers) and prove for satisfactory operation. Renew the deffictive parts. GS pump 415V,12.5Hp,3Ø | Item no 589 | 1 | Nos |
590 | 1.059 | 2004\nMOTORS \n(F) Carry out complete over hauling of the following motors (including blower parts for blowers) and prove for satisfactory operation. Renew the deffictive parts. Supply fan voith 415V,3Ø,2HP | Item no 590 | 1 | Nos |
591 | 1.0591 | 2004\nMOTORS \n(G) Carry out complete over hauling of the following motors (including blower parts for blowers) and prove for satisfactory operation. Renew the deffictive parts. Engine room supply/Exaust Blower motor (Reversable) 415V,3Ø,50Hz,10HP. | Item no 591 | 1 | Nos |
592 | 1.0592 | 2005 \nGroup starter panel | Item no 592 | 1 | FIRM NOT TO QUOTE |
593 | 1.0593 | 2005\nGroup starter panel\n(A) Group starter panel in MCR room.(it was having two sections & each section having 8 in nos starter controls including remote copntrol Push Buttens & group wise remote Emergency buttens) | Item no 593 | 1 | Nos |
594 | 1.0594 | 2005\nGroup starter pane\n (B) GSP to be carry out complete overhauling (includes defective switches to be renwed, perished control wiring to be renewed with crimping of proper lugs, marking sleeves to be put on control wiring and loose wirng to be tied with cable ties) (calibration certificates/test reports from NABL recognised Labs are to be submitted)\n\n\n . | Item no 594 | 1 | Nos |
595 | 1.0595 | 2005\nGroup starter panel\n(C) Renew the remote emergency push buttons switches | Item no 595 | 4 | Nos |
596 | 1.0596 | 2005\nGroup starter panel \n (D)Time Delay Switch (Make: selec,Model 800XU) to be provided for reversable E/R supply fan starter & etc & made operational. | Item no 596 | 3 | Nos |
597 | 1.0597 | 2006\n Eqpt/System: Shore Supply Box\n. Make:Marine Electrical,100amps,415V,3ph\nCarryout routines mentioned below and prove them for satisfactory performance | Item no 597 | 1 | FIRM NOT TO QUOTE |
598 | 1.0598 | 2006\nEqpt/System: Shore Supply Box\n (A) Renew the indication lamps with holders-3Nos | Item no 598 | 3 | Nos |
599 | 1.0599 | 2006 \nEqpt/System: Shore Supply Box. \n(B)Renew the window glass size 500mmX20mm(approximatly) including rubber gasket. | Item no 599 | 1 | Nos |
600 | 1.06 | 2006\nEqpt/System: Shore Supply Box.\n(C)Provide the Phase Sequence Change over switch 2 Way with OFF 415V,4 pole,100A.near the shore supply panel box & connect the switch in shore supply circuit & made operational. | Item no 600 | 1 | Nos |
601 | 1.0601 | 2006\nEqpt/System: Shore Supply Box.\n(D)provide the water proof (IP65)panel with door type for Phase Sequence Change over switch. | Item no 601 | 1 | Nos |
602 | 1.0602 | 2006\nEqpt/System: Shore Supply Box.\n(E)Renewal of shore suppply cable 3x50 sqmm, rubber insulated, Copper multi stranded wire marine cable (presntly the existing cable was damaging condition) | Item no 602 | 100 | Mtrs |
603 | 1.0603 | 2007 \nEqpt/System:-shore supply cable reel drum mechanisam | Item no 603 | 1 | FIRM NOT TO QUOTE |
604 | 1.0604 | 2007\nEqpt/System:-shore supply cable reel drum mechanisam\n(A)carry out complete over hauling of the cable drum incuding slip ring mechanisam and prove for satisfactory operation. Renew the deffictive parts. | Item no 604 | 1 | nos |
605 | 1.0605 | 2007\nEqpt/System:-shore supply cable reel drum mechanisam\n(B)Renew the slip ring set (presently it was deffective) | Item no 605 | 1 | nos |
606 | 1.0606 | 2007\nEqpt/System:-shore supply cable reel drum mechanisam\n(C)Renew the Bearings. | Item no 606 | 1 | Set |
607 | 1.0607 | 2008 \nEqpt/System: Light fittings. \nRenewal of following navigation lights | Item no 607 | 1 | FIRM NOT TO QUOTE |
608 | 1.0608 | 2008 \nEqpt/System: Light fittings.\n (A)Renew the AC navigational bulbs 230V,60w | Item no 608 | 10 | Nos |
609 | 1.0609 | 2008\nEqpt/System: Light fittings.\n (B)Renew the DC navigational bulbs 24V,60w | Item no 609 | 10 | Nos |
610 | 1.061 | 2008\nEqpt/System: Light fittings. \n\n(C) Follwing Light Fittings corroded, to be renewed: Watertight 24V,10W,Bulkhead Emergency Light Fittings Renew the total light fittings with LED fittings 10W,24V,DC along with necessary accessories and wiring renewal as required (the bulb must be operated 15V DC to 30V DC)(WT (ip65)surface type-25nos,flash type 25nos | Item no 610 | 30 | Nos |
611 | 1.0611 | 2008\nEqpt/System: Light fittings.\n (D) Renew Flush mounting Type indoor Twin LED tube light lamp Fittings 230V, 2X20W,LED light fittings, Make- Sysca/philips | Item no 611 | 20 | Nos |
612 | 1.0612 | 2008\nEqpt/System: Light fittings.\n(E) Renew Industrial Type watertightTwin LED tube light lamp Fittings 230V, 2X20W,LED light fittings, Make- Sysca/philips | Item no 612 | 30 | Nos |
613 | 1.0613 | 2008\nEqpt/System: Light fittings.\n (F) Renew LED Flood Light Fitting (WT) in Deck area. 120W,230V,AC; Make Sysca/philips | Item no 613 | 6 | Nos |
614 | 1.0614 | 2008 \nEqpt/System: Light fittings. \n(G) Renew LED Flood Light Fitting (WT) in E/R 120W,230V,AC; Make Sysca/philips | Item no 614 | 2 | Nos |
615 | 1.0615 | 2009 \nEqpt/System: Navigational Lighting Panels(AC & DC) Make:Edna 230V for AC,24V for DC | Item no 615 | 1 | FIRM NOT TO QUOTE |
616 | 1.0616 | 2009 \nEqpt/System: Navigational Lighting Panels(AC & DC) \n(A) Carryout routines mentioned below and prove them for satisfactory performance Clean & Tighten the all connections with proper lugs, ferrules & connecters | Item no 616 | 2 | Nos |
617 | 1.0617 | 2009\nEqpt/System: Navigational Lighting Panels(AC & DC) \n (B) Check the functions of all fuse units,control cards, indication lamps & horn. (1) If deffective repair them (2) If un repairable than renew them. | Item no 617 | 2 | Nos |
618 | 1.0618 | 2009\nEqpt/System: Navigational Lighting Panels(AC & DC)\n(C) Renew the fault detection module cards. | Item no 618 | 10 | Nos |
619 | 1.0619 | 2009\nEqpt/System: Navigational Lighting Panels(AC & DC) \n(D) Rectify the faults in the MIMIC along with led lamps -24V-1no,230V-1no (presently n/w) | Item no 619 | 1 | Nos |
620 | 1.062 | 2010 \nEqpt/System: Batteries Accomadation Boxes (Wooden) | Item no 620 | 1 | FIRM NOT TO QUOTE |
621 | 1.0621 | 2010\nEqpt/System: Batteries Accomadation Boxes \n (A) Renew the complete box along with top opene door type(for accommodate 2 in nos 180AH 12V batteries in each box) with 12mm Hylam sheet & provide led sheet as inside layer for every box (i.e bottem & sides) & painted the boxes with gray color for outside | Item no 621 | 6 | no's |
622 | 1.0622 | 2011\nEqpt/System:DG Engine (Make:KOEL;MODEL:6R1080T) starting control pannel | Item no 622 | 3 | FIRM NOT TO QUOTE |
623 | 1.0623 | 2011\nEqpt/System:DG Engine\n (1) Carryout compleat overhaul routines and proove them for satisfactory performance / Made operational \n(2) Clean & Tighten the all connections with proper lugs, ferrules & connecters. (3) Check all circuits continuities. (4) Check circuitry functions with control voltages.\n(5) Check all other accessories replace them if there is any deffective part | Item no 623 | 3 | sets |
624 | 1.0624 | 2011\nEqpt/System:DG Engine \n (A) Renew the speed control unit for ESD5200 series | Item no 624 | 2 | Nos |
625 | 1.0625 | 2011\n Eqpt/System:DG Engine \n(B)Renew the generator engine protection display unit | Item no 625 | 2 | Nos |
626 | 1.0626 | 2011 \nEqpt/System:DG Engine \n(C) Renew the magnetic switches 24v DC for self starter circuit | Item no 626 | 2 | Nos |
627 | 1.0627 | 2011\n Eqpt/System:DG Engine\n(D)Renew the self starters 24V DC for above engine | Item no 627 | 1 | Nos |
628 | 1.0628 | 2011\nEqpt/System:DG Engine\n (E)Renew the dynamos 24V DC for above engine models | Item no 628 | 1 | Nos |
629 | 1.0629 | 2011\nEqpt/System:DG Engine \n(F)Renew the self starters 12V DC for KOEL engine | Item no 629 | 1 | Nos |
630 | 1.063 | 2011\nEqpt/System:DG Engine \n(G)Renew the dynamos 12V DC for KOEL engine | Item no 630 | 1 | Nos |
631 | 1.0631 | 2012\n Eqpt/System: Fire Detection & Alaraming System Make:Marinelec Technolgies; \nModel:D109_MANUEL_GB REV2 | Item no 631 | 1 | FIRM NOT TO QUOTE |
632 | 1.0632 | 2012 \nEqpt/System: Fire Detection & Alaraming System\n(A) Check circuitry functions with control voltages | Item no 632 | 1 | Nos |
633 | 1.0633 | 2012\nEqpt/System: Fire Detection & Alaraming System\n (B) Renew the Fire Detection panel display system unit Model:D109_MANUEL_GB REV2 | Item no 633 | 1 | Nos |
634 | 1.0634 | 2013\nEqpt/System: Digital Tank Content Level Indication System\nMake:pune Techtrol Pvt Ltd Model:SLT-11SFW | Item no 634 | 1 | FIRM NOT TO QUOTE |
635 | 1.0635 | 2013\nEqpt/System: Digital Tank Content Level Indication System\n (A) Carryout compleat overhaul routines and proove them for satisfactory performance / Made operational (presently not working) | Item no 635 | 1 | Nos |
636 | 1.0636 | 2013\nEqpt/System: Digital Tank Content Level Indication System\n(B) Provide the bilge level sencers along with cableling & indication cum alaram system | Item no 636 | 1 | Nos |
637 | 1.0637 | 2014\nEqpt/System:Battery control switch | Item no 637 | 1 | FIRM NOT TO QUOTE |
638 | 1.0638 | 2014 \nEqpt/System:Battery control switch\n(A) Provide the 100A TP MCCB along with suitable accommodate box at entrance of E/R in allaway area.and connect in the circuit. | Item no 638 | 1 | Nos |
639 | 1.0639 | 2014\nEqpt/System:Battery control switch\n(B) Renew the 1core 30sq.mm copper multi satand flexible rubber cable | Item no 639 | 80 | Rmtrs |
640 | 1.064 | 2014\nEqpt/System:Battery control switch\n(C) Laying of cableing (4 lines of 1core 30sq.mm copper cable)from DCDB (located at under w/h) to entance of E/R in allaway area | Item no 640 | 20 | Rmtrs |
641 | 1.0641 | 2015\nEqpt/System: Cooking Range with 2 hot plates with oven;430V 3ph 6kw. Make:M/S Krist Engineering & Mfg compeny | Item no 641 | 1 | FIRM NOT TO QUOTE |
642 | 1.0642 | 2015 \nEqpt/System: Cooking Range with 2 hot plates with oven \n (A) Carryout compleat overhaul routines and proove them for satisfactory performance / Made operational | Item no 642 | 2 | Nos |
643 | 1.0643 | 2015\nEqpt/System: Cooking Range with 2 hot plates with oven (B)Clean & Tighten the all connections with proper lugs, ferrules & connecters | Item no 643 | 2 | Nos |
644 | 1.0644 | 2015\nEqpt/System: Cooking Range with 2 hot plates with oven (C)Check all circuits continuities | Item no 644 | 2 | Nos |
645 | 1.0645 | 2015\nEqpt/System: Cooking Range with 2 hot plates with oven (D) Renew the Heating elements ("W" type) 430V,1500W | Item no 645 | 10 | Nos |
646 | 1.0646 | 2015 \nEqpt/System: Cooking Range with 2 hot plates with oven (E) Redisgn the hot plate as per sample provided by the ship staff. | Item no 646 | 4 | Nos |
647 | 1.0647 | 2015 \nEqpt/System: Cooking Range with 2 hot plates with oven (F) Check circuitry functions with control voltages | Item no 647 | 2 | Nos |
648 | 1.0648 | 2015\nEqpt/System: Cooking Range with 2 hot plates with oven (G) Renew the temperature sensers | Item no 648 | 2 | Nos |
649 | 1.0649 | 2015 \nEqpt/System: Cooking Range with 2 hot plates with oven (H) Renew the W/T iron clad 3ph 430V 30A plug top along with socket. | Item no 649 | 2 | Nos |
650 | 1.065 | 2015\nEqpt/System: Cooking Range with 2 hot plates with oven (I) Renew the internal wiring with heat resistance multi stand flexible copper cable 4sq.mm \n | Item no 650 | 40 | Rmtrs |
651 | 1.0651 | 2016\n Eqpt/System: SCR control rectifier unit 2kw for M/E Make:ELTEK SGS PVT LTD \nModel type:FP2-2000W; Input 230V AC,out put 24v DC | Item no 651 | 2 | FIRM NOT TO QUOTE |
652 | 1.0652 | 2016 \nEqpt/System: SCR control rectifier unit 2kw for M/E \n(A) Carryout compleat overhaul routines and proove them for satisfactory performance / Made operational | Item no 652 | 2 | Nos |
653 | 1.0653 | 2016 \nEqpt/System: SCR control rectifier unit 2kw for M/E \n(B)Clean & Tighten the all connections with proper lugs, ferrules & connecters | Item no 653 | 2 | Nos |
654 | 1.0654 | 2016\nEqpt/System: SCR control rectifier unit 2kw for M/E \n(C)Check all circuits continuities | Item no 654 | 2 | Nos |
655 | 1.0655 | 2016 \n Eqpt/System: SCR control rectifier unit 2kw for M/E \n(D)Check circuitry functions with control voltages | Item no 655 | 2 | Nos |
656 | 1.0656 | 2016\n Eqpt/System: SCR control rectifier unit 2kw for M/E \n(E)Check all other accessories replace them if there is any deffective part | Item no 656 | 2 | Nos |
657 | 1.0657 | 2017 \n Eqpt/System: Wall mounted Electrical fans (Oscillating) Make:C&G, Type- 400 mm Sweep | Item no 657 | 18 | FIRM NOT TO QUOTE |
658 | 1.0658 | 2017 \n Eqpt/System: Wall mounted Electrical fans (Oscillating) \n(A) Renew the fans fitted at various places and prove them for satisfactory performance | Item no 658 | 10 | nos |
659 | 1.0659 | 2017\nEqpt/System: Wall mounted Electrical fans (Oscillating) \n(B)Renew the fans fitted at crew acomidation place prove them for satisfactory performance | Item no 659 | 8 | nos |
660 | 1.066 | 2018\nEqpt/System:split A/Cs | Item no 660 | 1 | FIRM NOT TO QUOTE |
661 | 1.0661 | 2018\nEqpt/System:split A/Cs \n(A) Renew & installing the 3 in nos spilt A/Cs at acommidation-2nos (1.5 Tons),2ton for W/H- 1nos,master cabin -1no(1.5ton),Engineer cabin-1no (1.5ton) (the job included the gutting & regutting,laying of cabling) | Item no 661 | 5 | Nos |
662 | 1.0662 | 2018\nEqpt/System:split A/Cs\n(B) Provide the 1 in no Delta/Delta transformer 25KVA input3Ph,415V,50Hz & out put 3Ph,230V,50Hz at under W/H area (installation,conections & prove satisfactory operation) | Item no 662 | 1 | Nos |
663 | 1.0663 | 2018\nEqpt/System:split A/Cs\n(C) Renew & layin of 3X10sq.mm multi stant copper marine cable (from MSB to under W/H) &(trnasformer to MCB DB) | Item no 663 | 100 | Rmtr's |
664 | 1.0664 | 2018\nEqpt/System:split A/Cs\n(D) Renew & laying of 3X6sq.mm multi stant copper marine cable (from under W/H to variou ac locations via switches) | Item no 664 | 300 | Rmtr's |
665 | 1.0665 | 2018 \nEqpt/System:split A/Cs\n(E) Renew & install the 1 in no MCB DB panel box Which is required to have 10 in nos DP MCB 20A,2 nos TP 60A mcb,3 in nos LED indication lamps,name tally plates,connecting clips. | Item no 665 | 1 | Nos |
666 | 1.0666 | 2018\nEqpt/System:split A/Cs\n(F) Renew the 3 in nos industrial sockets for Acs. | Item no 666 | 3 | Nos |
667 | 1.0667 | 2018\n Eqpt/System:split A/Cs\n(G) Renew the 3 in nos Ac stebilisers | Item no 667 | 3 | Nos |
668 | 1.0668 | 2019 \nEqpt/System:Hot Water Boiler\nMake:M/s kantilal chunilal &sons. | Item no 668 | 1 | FIRM NOT TO QUOTE |
669 | 1.0669 | 2019\nEqpt/System:Hot Water Boiler\n (A) Repair/overhauling of hot water boiler 20ltrs 230V | Item no 669 | 1 | Nos |
670 | 1.067 | 2020\nEqpt/System: Water cooler & water purifier 20ltrs 230V Make:M/s.Alfa Aircon & M/s Bombay Gas light. | Item no 670 | 1 | FIRM NOT TO QUOTE |
671 | 1.0671 | 2020\nEqpt/System: Water cooler & water purifier 20ltrs \n (A) Repair/overhauling of water cooler & water purifier 20ltrs 230V Make:M/s.Alfa Aircon & M/s Bombay Gas light. | Item no 671 | 1 | Nos |
672 | 1.0672 | 2021 \nEqpt/System:Main Engine (Make:Caterpillar ,Model-CAT3512C Engines,1194KW@1600RPM) starting control pannel (including Local & Remote Panels) Make:GMMCO | Item no 672 | 2 | FIRM NOT TO QUOTE |
673 | 1.0673 | 2021\nEqpt/System:Main Engine (Make:Caterpillar)\n (A) Carryout compleat overhaul routines and proove them for satisfactory performance / Make operational | Item no 673 | 2 | Nos |
674 | 1.0674 | 2021\nEqpt/System:Main Engine (Make:Caterpillar)\n(B) Clean & Tighten the all connections with proper lugs, ferrules & connecters | Item no 674 | 2 | Nos |
675 | 1.0675 | 2021\nEqpt/System:Main Engine (Make:Caterpillar)\n(C) Check all circuits continuities | Item no 675 | 2 | Nos |
676 | 1.0676 | 2021\nEqpt/System:Main Engine (Make:Caterpillar)\n(D)Check circuitry functions with control voltages | Item no 676 | 2 | Nos |
677 | 1.0677 | 2021\nEqpt/System:Main Engine (Make:Caterpillar) \n(E) renew the indication lamps along with holdfers. | Item no 677 | 20 | Nos |
678 | 1.0678 | 2021\nEqpt/System:Main Engine (Make:Caterpillar)\n(F) Renew the ON key switches | Item no 678 | 4 | Nos |
679 | 1.0679 | 2021\nEqpt/System:Main Engine (Make:Caterpillar) \n(G) Renew the push butons along contacts | Item no 679 | 10 | Nos |
680 | 1.068 | 2021\nEqpt/System:Main Engine (Make:Caterpillar)\n(H) Renew the control pcb | Item no 680 | 1 | Nos |
681 | 1.0681 | 2021\nEqpt/System:Main Engine (Make:Caterpillar)\n (I) Renew the emergency stop butons along with safety cap | Item no 681 | 4 | Nos |
682 | 1.0682 | 2022 \nEqpt/System:Electrical Horn | Item no 682 | 1 | FIRM NOT TO QUOTE |
683 | 1.0683 | 2022\nEqpt/System:Electrical Horn\n (A) Provide the suitable ship electrical horn for 50mtrs to 75 mtrs length vessels along with control panel.sound >130db,weather proof,& rust proof material | Item no 683 | 1 | Nos |
684 | 1.0684 | 2023\nEqpt/System:Air Horn controling system.\nMake:M/s Krist Eng & Mant corp. Ghaziabad \n1.Carryout compleat overhaul routines and proove them for satisfactory performance / Made operational \n 2.Clean & Tighten the all connections with proper lugs, ferrules & connecters. \n 3. Check all circuits continuities\n 4.Check circuitry functions with control voltages | Item no 684 | 1 | FIRM NOT TO QUOTE |
685 | 1.0685 | 2023\nEqpt/System:Air Horn controling system.\n(A) Renew the control pcb | Item no 685 | 1 | Nos |
686 | 1.0686 | 2023\n Eqpt/System:Air Horn controling system.\n(B) Renew the air soilnoid valves along with coil 230V AC | Item no 686 | 1 | Nos |
687 | 1.0687 | 2023\n Eqpt/System:Air Horn controling system. \n(C) Renew the air soilnoid valves along with coil 24V DC | Item no 687 | 1 | Nos |
688 | 1.0688 | 2023\nEqpt/System:Air Horn controling system\n (D) Renew the Timer pcb | Item no 688 | 1 | Nos |
689 | 1.0689 | 2024 \nEqpt/System:Engine Room Ventilation Fans.Make:M/s Heinen & hopman engineering pvt ltd, kolkatta | Item no 689 | 1 | FIRM NOT TO QUOTE |
690 | 1.069 | 2024 \nEqpt/System:Engine Room Ventilation Fans \n(A) Ventilation fans running with abnormal sound..Required to noise level to be decreses <50db by redesign the equipments | Item no 690 | 2 | Nos |
691 | 1.0691 | RECOMMENDED SPARE LIST FOR MAIN ENGINES (02)\nCAETRPILLAR 3512C | Item no 691 | 1 | FIRM NOT TO QUOTE |
692 | 1.0692 | ELEMENT-F\nPART NO. 9M-2342\nHSN CODE- 7326 | Item no 692 | 6 | NO'S |
693 | 1.0693 | GASKET\nPART NO.8H-2778\nHSN CODE - 4016 | Item no 693 | 6 | NO'S |
694 | 1.0694 | SEAL-O-RING\nPART NO.6V-3907\nHSN CODE - 4016 | Item no 694 | 4 | NO'S |
695 | 1.0695 | FILTER A\nPART NO.1R-0726\nHSN CODE -8421 | Item no 695 | 16 | NO'S |
696 | 1.0696 | ELEMENT AS\nPART NO.1R-0756\nHSN CODE - 7326 | Item no 696 | 28 | NO'S |
697 | 1.0697 | PRI ELEMENT AIR\nPART NO.226-2779\nHSN CODE - 7326 | Item no 697 | 8 | NO'S |
698 | 1.0698 | SEAL-O-RING\nPART NO.6V-9027\nHSN CODE - 4016 | Item no 698 | 8 | NO'S |
699 | 1.0699 | BREATHER A\nPART NO.4W-3027\nHSN CODE -8341 | Item no 699 | 16 | NO'S |
700 | 1.07 | SEAL-O-RING\nPART NO.033-6031\nHSN CODE - 4016 | Item no 700 | 16 | NO'S |
701 | 1.0701 | CLAMP\nPART NO.4W-3034\nHSN CODE - 7326 | Item no 701 | 16 | NO'S |
702 | 1.0702 | O RING SEAL\nPART NO.8T-7877\nHSN CODE -4016 | Item no 702 | 4 | NO'S |
703 | 1.0703 | ROD AS ZINC\nPART NO.116-7011\nHSN CODE - 8409 | Item no 703 | 16 | NO'S |
704 | 1.0704 | ROD \nPART NO.6L-2280\nHSN CODE -8431 | Item no 704 | 16 | NO'S |
705 | 1.0705 | HOSE (BULK) (length IN CM)\nPART NO.371-1253\nHSN CODE - 4009 | Item no 705 | 386 | NO'S |
706 | 1.0706 | ELE PREMIX 20 LTR (OLD NO 3658396)\nPART NO 4692718\nHSN CODE -3820 | Item no 706 | 16 | NO'S |
707 | 1.0707 | CAT DEO C14 BARREL (208 LTR)\nPART NO 3E9840\nHSN CODE - 2710 | Item no 707 | 10 | NO'S |
708 | 1.0708 | CAT DEO C14 PAIL (20 LTR)\nPART NO.3E9848\nHSN CODE - 2710 | Item no 708 | 16 | NO'S |
709 | 1.0709 | BOTTLE GP\nPART NO.169-8373\nHSN CODE - 7326 | Item no 709 | 4 | NO'S |
710 | 1.071 | PROBE HOLDER\nPART NO.162-8374\nHSN CODE - 7307 | Item no 710 | 2 | NO'S |
711 | 1.0711 | CLAMP\nPART NO 5P-0597\nHSN CODE - 7326 | Item no 711 | 8 | NO'S |
712 | 1.0712 | CLAMP\nPART NO 5P-9848\nHSN CODE - 7326 | Item no 712 | 4 | NO'S |
713 | 1.0713 | HOSE T\nPART NO 217-6692\nHSN CODE - 4009 | Item no 713 | 4 | NO'S |
714 | 1.0714 | REGULATOR\nPART NO 4W-4011\nHSN CODE - 9032 | Item no 714 | 8 | NO'S |
715 | 1.0715 | GASKET\nPART NO 7N-4927\nHSN CODE - 4016 | Item no 715 | 2 | NO'S |
716 | 1.0716 | GASKET\nPART NO 2N-0931\nHSN CODE - 4016 | Item no 716 | 8 | NO'S |
717 | 1.0717 | SEAL-O-RING\nPART NO 6V-1454\nHSN CODE - 4016 | Item no 717 | 8 | NO'S |
718 | 1.0718 | LIP- SEAL\nPART NO 3S-9843\nHSN CODE - 4016 | Item no 718 | 8 | NO'S |
719 | 1.0719 | GASKET\nPART NO 148-7996\nHSN CODE - 4016 | Item no 719 | 2 | NO'S |
720 | 1.072 | REGULATOR 30 DEG\nPART NO 219-3240\nHSN CODE - 9032 | Item no 720 | 8 | NO'S |
721 | 1.0721 | LIP- SEAL\nPART NO 3S-9643\nHSN CODE - 4016 | Item no 721 | 8 | NO'S |
722 | 1.0722 | SEAL-O-RING\nPART NO 6V-1454\nHSN CODE - 4016 | Item no 722 | 4 | NO'S |
723 | 1.0723 | PLUG\nPART NO 287-7296\nHSN CODE 8536 | Item no 723 | 8 | NO'S |
724 | 1.0724 | PLUG\nPART NO 223-8525\nHSN CODE 8536 | Item no 724 | 4 | NO'S |
725 | 1.0725 | JOINT AS TUBE\nPART NO 7L-3201 | Item no 725 | 16 | NO'S |
726 | 1.0726 | PLATE GP - HEAT EXCHANGER\nPART NO300-5623 | Item no 726 | 2 | NO'S |
727 | 1.0727 | SEAL-O-RING\nPART NO 8L-8585 | Item no 727 | 4 | NO'S |
728 | 1.0728 | DRIVE AS MOTOR\nPART NO 6N-3826 | Item no 728 | 2 | NO'S |
729 | 1.0729 | SOLENOID AS STARTING MOTOR\nPART NO 318-2082 | Item no 729 | 2 | NO'S |
730 | 1.073 | KIT TERMINAL\nPART NO 3N-3763 | Item no 730 | 2 | NO'S |
731 | 1.0731 | KIT SEAL & VANE\nPART NO 5N-8390 | Item no 731 | 2 | NO'S |
732 | 1.0732 | KIT VALVE SEAL\nPART NO 7C-5105 | Item no 732 | 2 | NO'S |
733 | 1.0733 | FILTER ELEMENT AS-AIR\nPART NO 208-9065 | Item no 733 | 4 | NO'S |
734 | 1.0734 | RECOMMENDED SPARE LIST FOR 5K ROUTINES\nDIESEL GENERATORS - KIRLOSKAR 6R 1080 | Item no 734 | 1 | FIRM NOT TO QUOTE |
735 | 1.0735 | CENTRIFIGUAL FILTER SERVICE KIT FR SL.90 & 6R \nPART NO.F6.999.100.0.00 | Item no 735 | 1 | NO'S |
736 | 1.0736 | KOEL CARE SUPER GENUNINE OIL 20 LTRS CAN\nPART NO.82.050.10.0.20 | Item no 736 | 1 | NO'S |
737 | 1.0737 | LUB OIL FILTER\nPART NO.DV0.014.02.0.00 | Item no 737 | 2 | NO'S |
738 | 1.0738 | PRIMARY ELEMENT\nPART NO.6H.411.02.0.00 | Item no 738 | 2 | NO'S |
739 | 1.0739 | V BELT ROULANDS (1250) MAKE\nPART NO.4H.1531.01.0.00 | Item no 739 | 1 | NO'S |
740 | 1.074 | V BELT COGGED (BX-48)\nPART NO.47.305.01.0.00 | Item no 740 | 1 | NO'S |
741 | 1.0741 | FUEL FILTER CARTRIDGE DUPLEX TYPE\nPART NO.4H.333.03.0.00 | Item no 741 | 2 | NO'S |
742 | 1.0742 | KOEL CARE SUPER GENUNINE OIL 26 LTRS CAN\nPART NO.82.020.35.1.25 | Item no 742 | 1 | NO'S |
743 | 1.0743 | FUEL PIPE (PRIMARY TO SECONDARY)\nPART NO.F6.353.112.0.00 | Item no 743 | 2 | NO'S |
744 | 1.0744 | 1 METER LONG FUEL HOSES WIRE BREADED \nPART NO.6H.466.35.0.00 | Item no 744 | 1 | NO'S |
745 | 1.0745 | 1 METER LONG FUEL HOSES WIRE BREADED \nPART NO6H.466.36.0.00 | Item no 745 | 1 | NO'S |
746 | 1.0746 | WIRE BRAIDED PIPE FROM JACKED LEAFOFF TO FUEL COLLECTOR \nPART NO 6H.945.14.0.00 | Item no 746 | 1 | NO'S |
747 | 1.0747 | LUB OIL SUPPLY HOSE (CRANK CASE TO FIP) FOR IRS \nPART NO .4H.333.01.0.00 | Item no 747 | 1 | NO'S |
748 | 1.0748 | WIRE BRAIDED OIL PIPE FOR DUPLEX FILTER \nPART NO.4H.333.11.0.00 | Item no 748 | 1 | NO'S |
749 | 1.0749 | WIRE BRAIDED OIL PIPE FOR DUPLEX FILTER(LONG)\nPART NO.4H.333.29.0.00 | Item no 749 | 1 | NO'S |
750 | 1.075 | HP PIPE ASSEMBLY (DIA 6.35 x 1.8)\nPART NO.6H.945.50.0.00 | Item no 750 | 1 | NO'S |
751 | 1.0751 | COMBINED LEAK OFF PIPE ASSLY\nPART NO.6H.945.40.0.00 | Item no 751 | 1 | NO'S |
752 | 1.0752 | O-RING FOR DRAIN PLUG\nPART NO.F6.024.47.0.00 | Item no 752 | 2 | NO'S |
753 | 1.0753 | THERMOSTAT BYPASS HOSE \nPART NO.4H.023.02.0.00 | Item no 753 | 1 | NO'S |
754 | 1.0754 | HOSE STRAIGHT 70 MM LENGTH WITH CENTRAL HUMP\nPART NO.4H.366.07.0.00 | Item no 754 | 1 | NO'S |
755 | 1.0755 | L.O. SUPPLY HOSE (FIP) M10 BANJO ENDS X 235 L \nPART NO.4H.006.01.0.00 | Item no 755 | 1 | NO'S |
756 | 1.0756 | RUBBER HOSE (FOR 'TR55' TURBO, COMPRESSOR OUTLET)\nPART NO.4H.168.11.0.00 | Item no 756 | 1 | NO'S |
757 | 1.0757 | HOSE FOR AIR CLEANER (70 IDX80 L)\nPART NO.6H.466.47.0.00 | Item no 757 | 1 | NO'S |
758 | 1.0758 | HOSE (DANALDSON P532944-3 RINGS -4 PLY 102X152 260 DEGC CAC- INLET\nPART NO.4H.073.01.0.00 | Item no 758 | 2 | NO'S |
759 | 1.0759 | HOSE FOR WATER PUMP INLET TO RAD OUTLET\nPART NO.4H.073.02.0.00 | Item no 759 | 1 | NO'S |
760 | 1.076 | HOSE ( RADIATOR TO WATER PUMP PIPE (45X45X130L)\nPART NO.6H.073.01.0.00 | Item no 760 | 1 | NO'S |
761 | 1.0761 | HOSE ( PIPE TO WATER PUMP PIPE (45X45X130L)\nPART NO.4H.073.02.0.00 | Item no 761 | 2 | NO'S |
762 | 1.0762 | HOSE MAKE UP CONNECTION\nPART NO.6H.036.14.0.00 | Item no 762 | 1 | NO'S |
763 | 1.0763 | SS JOINT (4")\nPART NO.F6.503.02.0.00 | Item no 763 | 2 | NO'S |
764 | 1.0764 | JOINT FOR ADAPTOR (TURBO SIDE)\nPART NO.4H.132.27.0.00 | Item no 764 | 1 | NO'S |
765 | 1.0765 | JOINT FOR ADAPTOR CRANKCASE SIDE\nPART NO.4H.132.31.0.00 | Item no 765 | 1 | NO'S |
766 | 1.0766 | JOINT SS (FOR TURBO CHARGER)\nPART NO.6H.029.01.0.00 | Item no 766 | 1 | NO'S |
767 | 1.0767 | R RINGS (DIN 70910-65X2.5)\nPART NO.F6.168.02.0.00 | Item no 767 | 8 | NO'S |
768 | 1.0768 | S.SS JOINT FOR EXHAUST MANIFOLD\nPART NO P2.106.01.0.00 | Item no 768 | 6 | NO'S |
769 | 1.0769 | INJECTOR ASSLY (V.S TURBOCHARGERD ENGINE)\nPART NO.4H.154.10.0.00 | Item no 769 | 6 | NO'S |
770 | 1.077 | WASHER FOR INJ (BOSCH NO 243999032/ 2430105020)\nPART NO.10.029.07.0.00 | Item no 770 | 6 | NO'S |
771 | 1.0771 | O RING FOR NOZZLE\nPART NO.3H.009.11.0.00 | Item no 771 | 6 | NO'S |
772 | 1.0772 | THERMOSTAT ELEMEMNT (74 DEG) WTIL NO DEV358\nPART NO.39.040.09.0.00 | Item no 772 | 1 | NO'S |
773 | 1.0773 | JOINT FOR THERMOSTAQT COVER (METALLIC)\nPART NO.4H.053.08..0.00 | Item no 773 | 1 | NO'S |
774 | 1.0774 | PISTON RING SET (105 DIA\nPART NO.2H.009.30.0.00 | Item no 774 | 6 | NO'S |
775 | 1.0775 | INLET AND EXHAUST VALVE PAIR \nPART NO 4H.007.40.0.00 | Item no 775 | 6 | NO'S |
776 | 1.0776 | VALVE GUIDE (FOR INLET & EXHAUST)\nPART NO.4H.007.02.0.00 | Item no 776 | 12 | NO'S |
777 | 1.0777 | VALVE SHEET INSERT INLET\nPART NO.4H.007.03.0.00 | Item no 777 | 6 | NO'S |
778 | 1.0778 | VALVE SHEET INSERT EXHAUST \nPART NO.4H.007.04.0.00 | Item no 778 | 6 | NO'S |
779 | 1.0779 | VALVE SEAL\nPART NO.06.631.02.0.00 | Item no 779 | 12 | NO'S |
780 | 1.078 | VALVE COLLET (PAIR)\nPART NO.02.022.12.0.00 | Item no 780 | 12 | NO'S |
781 | 1.0781 | VALVE SPRING\nPART NO.02.022.13.0.00 | Item no 781 | 12 | NO'S |
782 | 1.0782 | VALVE SPRING CUP\nPART NO 34.013.13.0.00 | Item no 782 | 12 | NO'S |
783 | 1.0783 | CONNECTING ROD BOLT\nPART NO.04.692.03.0.00 | Item no 783 | 12 | NO'S |
784 | 1.0784 | BEARING C/R KIR HA 694\nPART NO B.075.4.00.003 | Item no 784 | 1 | NO'S |
785 | 1.0785 | SET OF JOINTS FOR 6H.4598\nPART NO .6H.522.76.0.00 | Item no 785 | 1 | NO'S |
786 | 1.0786 | SET OF O RINGS FOR 6H.4598\nPART NO.6H.522.80.0.00 | Item no 786 | 1 | NO'S |
787 | 1.0787 | SET OF WASHERS FOR 6H.4598\nPART NO 6H.522.77.0.00 | Item no 787 | 1 | NO'S |
788 | 1.0788 | ANTI VIBRATION MOUNTING 144 CRS CORI RUBBER\nPART NO 6H.118.02.0.00 | Item no 788 | 4 | NO'S |
789 | 1.0789 | SHOCK MOUNT\nPART NO 6H.720.07.0.00 | Item no 789 | 6 | NO'S |
790 | 1.079 | BOLT FOR CYLLINDER HEAD\nPART NO 4H.007.07.0.00 | Item no 790 | 26 | NO'S |
791 | 1.0791 | CYLLINDER LINER (105MM DIA)\nPART NO 2H.008.01.0.00 | Item no 791 | 6 | NO'S |
792 | 1.0792 | EXHAUST TEMEPERATURE SENSOR, 1/4" CONNECTION RADIX MAKE TYPE- K)\nPART NO 6H.715.31.0.00 | Item no 792 | 1 | NO'S |
793 | 1.0793 | PRESSURE TRANSMITTER (DANSFOSS MAKE TYPE -MBS 3250, RANGE 0 TO 10 BAR OUT PUT 4 TO 20 mA)\nPART NO 6H.715.27.0.00 | Item no 793 | 1 | NO'S |
794 | 1.0794 | LUB OIL PRESSURE SENSOR WITH SWITCH THREE POINT DUAL WIPER TYPE, CONTINTENTAL MAKE\nPART NO 46.252.05.0.00 | Item no 794 | 1 | NO'S |
795 | 1.0795 | TEMP SENSOR WITH INBUILD TRANSMITTER ( DANSOSS MAKE TYPE mbt5560 , RANGE 0 TO 150 DEG OUTPUT 4 TO 20mA)\nPART NO 6H.715.26.0.00 | Item no 795 | 2 | NO'S |
796 | 1.0796 | COOLENT TEMP.SWITCH 95+1/3 DEG(RICO/ RIDDHI SIDDH)\nPART NO 4H.907.01..0.00 | Item no 796 | 1 | NO'S |
797 | 1.0797 | AVR-MX321 TYPE FOR STAMFORD ALTERNATOR 160 KVA AT NTP, 415 VOLTS, 50 HZ 3 PHASE, 0.8 PF\nPART NO 6H.892.06.0.00 | Item no 797 | 1 | NO'S |
798 | 1.0798 | LUB OIL PRESSURE GAUGE (0-10 KG/ SQ CM)\nPART NO 46.244.01.0.00 | Item no 798 | 1 | NO'S |
799 | 1.0799 | LUB OIL TEMP GAUGE ( 3METER CAPILLARY)\nPART NO 49.087.01.0.00 | Item no 799 | 1 | NO'S |
800 | 1.08 | WATER TEMP GAUGE, 1.8 M CAPPILARY\nPART NO 38.027.02.0.00 | Item no 800 | 1 | NO'S |
801 | 1.0801 | INDICATING LAMP, SCHINDER MAKE 24 VDC XB7EVO3BPN (GREEN)\nPART NO 6H.717.31.0.00 | Item no 801 | 1 | NO'S |
802 | 1.0802 | TEMPERATURE INDICATOR 24V DC\nPART NO 6H.715.08.0.00 | Item no 802 | 1 | NO'S |
803 | 1.0803 | MCB 10 AMP 2 POLE\nPART NO 06.980.12.0.00 | Item no 803 | 1 | NO'S |
804 | 1.0804 | RELAY BOARD UL MAKE 4 CHANNEL 24 V DC 2 CHANGE OVER\nPART NO F6.865.05.0.00 | Item no 804 | 1 | NO'S |
805 | 1.0805 | 2.5 TERMINAL STRIP PHONIX MAKE UK 2.5\nPART NOF6.082.05.0.00 | Item no 805 | 1 | NO'S |
806 | 1.0806 | DIODE RECTIFIER SEMI CONDUCTOR MAKE 16 AMP. RECTIFIER 35-10\nPART NO DV2.860.34.0.00 | Item no 806 | 1 | NO'S |
807 | 1.0807 | RECOMMENDED SPARE LIST FOR STP\nWARTSILA HAMWORTHY MODEL - STC 02, GO No-98087-01 | Item no 807 | 1 | FIRM NOT TO QUOTE |
808 | 1.0808 | PUMP\n1) IMPELLER SCREW\n2)PEEL OFF SHIM\n3)MECHANICAL SEAL\n4)TAB WASHER | Item no 808 | 1 | set |
809 | 1.0809 | BLOWER\n1)BLOWER\n2)FILTER ELEMENTS\n3)SET OF BEARINGS\n4)SET SPACERS AND TOLERANCE RINGS | Item no 809 | 1 | set |
810 | 1.081 | CONTROLS\n1)CONTACTOR\n2)AUXIALARY CONTACTOR\n3)RELAY\n4)BULB | Item no 810 | 1 | set |
811 | 1.0811 | SAMPLING KIT\nSAMPLING KIT | Item no 811 | 1 | NO'S |
812 | 1.0812 | CHLORINATION CHEMICAL\n25 LITRE DRUM | Item no 812 | 1 | NO'S |
813 | 1.0813 | DE CHLORINATION SOLUTION\n25 LITRE DRUM | Item no 813 | 1 | NO'S |
814 | 1.0814 | CHLORINATION DOSING PUMP\nCOMPLETE SPARE KIT | Item no 814 | 1 | NO'S |
815 | 1.0815 | DECHLORINATION DOSING PUMP\nCOMPLETE SPARE KIT | Item no 815 | 1 | NO'S |
816 | 1.0816 | DIFFUSERS\nDIFFUSERS | Item no 816 | 1 | NO'S |
817 | 1.0817 | HATCH COVER JOINTS\nFULL SET | Item no 817 | 1 | NO'S |
818 | 1.0818 | AIR FLOW METER\nCOMPLETE REPLACEMENT | Item no 818 | 1 | NO'S |
819 | 1.0819 | RECOMMENDED SPARE LIST FOR VOITH PROPULSION | Item no 819 | 1 | FIRM NOT TO QUOTE |
820 | 1.082 | GREASE | Item no 820 | 5 | NO'S |
821 | 1.0821 | REACTIVE ANODE 45X160X405, TYPE:20-Z\nPOSITION:FLOATING | Item no 821 | 10 | NO'S |
822 | 1.0822 | FILTER ELEMENT\nPOSITION:DRYDOCK | Item no 822 | 8 | NO'S |
823 | 1.0823 | AERATION ELEMENT\nPOSITION:FLOATING | Item no 823 | 4 | NO'S |
824 | 1.0824 | SEAL 605X545X3\nPOSITION:DRYDOCK | Item no 824 | 2 | NO'S |
825 | 1.0825 | SEAL 310X250X3\nPOSITION:DRYDOCK | Item no 825 | 4 | NO'S |
826 | 1.0826 | SEAL 2X335X490\nPOSITION:FLOATING | Item no 826 | 4 | NO'S |
827 | 1.0827 | FUSIBLE PLUG\nPOSITION:FLOATING | Item no 827 | 6 | NO'S |
828 | 1.0828 | MTS SWITCH ELEMENT\nPOSITION:FLOATING | Item no 828 | 2 | NO'S |
829 | 1.0829 | SEAL RING 42X49\nPOSITION:DRYDOCK | Item no 829 | 2 | NO'S |
830 | 1.083 | LIST OF ANTICIPATORY SPARES:- | Item no 830 | 1 | FIRM NOT TO QUOTE |
831 | 1.0831 | CONTAMINATIUON INDICATOR\nPOSITION:FLOATING | Item no 831 | 4 | NO'S |
832 | 1.0832 | THERMOMETER\nPOSITION:FLOATING | Item no 832 | 2 | NO'S |
833 | 1.0833 | THERMOMETER\nPOSITION:FLOATING | Item no 833 | 2 | NO'S |
834 | 1.0834 | THERMOMETER\nPOSITION:FLOATING | Item no 834 | 2 | NO'S |
835 | 1.0835 | THERMOMETER\nPOSITION:FLOATING | Item no 835 | 2 | NO'S |
836 | 1.0836 | THERMOMETER\nPOSITION:FLOATING | Item no 836 | 2 | NO'S |
837 | 1.0837 | PRESSURE SWITCH\nPOSITION:FLOATING | Item no 837 | 4 | NO'S |
838 | 1.0838 | PRESSURE SWITCH\nPOSITION:FLOATING | Item no 838 | 2 | NO'S |
839 | 1.0839 | THERMOMETER PROB HOUSING\nPOSITION:FLOATING | Item no 839 | 2 | NO'S |
840 | 1.084 | FLOAT SWITCH\nPOSITION:FLOATING | Item no 840 | 2 | NO'S |
841 | 1.0841 | FLOAT SWITCH\nPOSITION:FLOATING | Item no 841 | 2 | NO'S |
842 | 1.0842 | SWITCH\nPOSITION:FLOATING | Item no 842 | 2 | NO'S |
843 | 1.0843 | RESIST THERMOMETER\nPOSITION:FLOATING | Item no 843 | 4 | NO'S |
844 | 1.0844 | GASKET\nPOSITION:DRYDOCK | Item no 844 | 4 | NO'S |
845 | 1.0845 | SCREW PLUG\nPOSITION:DRYDOCK | Item no 845 | 2 | NO'S |
846 | 1.0846 | IF REQUIED - CONTRACTOR / CUSTOMER SCOPE:- | Item no 846 | 1 | FIRM NOT TO QUOTE |
847 | 1.0847 | PROPELLER OILS | Item no 847 | 3200 | LTRS |
848 | 1.0848 | TURBO COUPLING OILS | Item no 848 | 40 | LTRS |
849 | 1.0849 | PEDASTAL BEARING | Item no 849 | 2 | LTRS |
850 | 1.085 | GEAR COUPLING | Item no 850 | 2 | LTRS |
851 | 1.0851 | DOCKING AND ALLIED SERVICES | Item no 851 | 1 | FIRM NOT TO QUOTE |
852 | 1.0852 | (A) Docking and undocking charges (Both Versions) | Item no 852 | 2 | Version\nFIRM NOT TO QUOTE |
853 | 1.0853 | (B) Dock blocks preparation & laying out as per docking plan | Item no 853 | 2 | LS\nFIRM NOT TO QUOTE |
854 | 1.0854 | Dock hire charges for an estimated duration of 60 Days as per OCR | Item no 854 | 1 | FIRM NOT TO QUOTE will be provided by ND(V) |
855 | 1.0855 | Wet basin/alongside hire charges for the remaining duration (i.e. total refit duration of 90 days – 60 days docking period) | Item no 855 | 1 | FIRM NOT TO QUOTE will be provided by ND(V) |
856 | 1.0856 | Provision of sufficient lighting for duty staff | Item no 856 | 120 | Days |
857 | 1.0857 | (a) Quote for maintenance of two in no. fire lines for the refit duration . | Item no 857 | 120 | Days |
858 | 1.0858 | (b) Two each connection/ disconnection charges for for the refit duration | Item no 858 | 120 | Days |
859 | 1.0859 | Provision of two transports (cars) for entire refit duration (one for refit Co-ordinating staff and one for ND(V) monitoring Team) for 10 hrs or 100KM/day whichever is less | Item no 859 | 120 | Days |
860 | 1.086 | Mail Man services (02) Nos for entire refit duration (one for user Department and one for planning /Co-ordinating department )to be provided for 10 Hrs per day | Item no 860 | 120 | days |
861 | 1.0861 | QC inspection for the entire scope of work by third party IRS/LRS/ABS/QC/TPI for the refit duration as per the QIS | Item no 861 | 1 | as per QIS\nFirm not to quote |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail