| 1 | 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. | BI01010001010000000000000515BI0100001113 | 10 | CuM. |
|---|
| 2 | 2 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m In ground floor including roof.(a) upto 150 mm. thick | BI01010001010000000000000515BI0100001114 | 5 | CuM. |
|---|
| 3 | 3 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge | BI01010001010000000000000515BI0100001115 | 15 | CuM. |
|---|
| 4 | 4 | Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed. Payment to be made on measurement of portion of roof or wall removed.) | BI01010001010000000000000515BI0100001116 | 500 | SqM. |
|---|
| 5 | 5 | Dismantling carefully wood work in posts,\npost,plates, rafters, partition etc., sorting and\nstacking serviciable materials at site and removing rubbish as directed | BI01010001010000000000000515BI0100001117 | 1 | CuM. |
|---|
| 6 | 6 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. | BI01010001010000000000000515BI0100001118 | 5 | CuM. |
|---|
| 7 | 7 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. | BI01010001010000000000000515BI0100001119 | 110 | SqM. |
|---|
| 8 | 8 | Labour for laying single brick flat soling including ramming and dressing bed to proper level and filling joints with powdered earth | BI01010001010000000000000515BI0100001120 | 110 | SqM. |
|---|
| 9 | 9 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor\nas per relevant IS codes.\n(b) River bazree | BI01010001010000000000000515BI0100001121 | 50 | CuM. |
|---|
| 10 | 10 | Hire and labour charges for shuttering with centreing and necessary staging up to 4m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs beams and columns, lintels, curved or straight including fitting, fixing and striking out after completion of work (up to roof of ground floor).\n25mm to 30mm thick wooden shuttering as per decision & direction of the E.I.C. | BI01010001010000000000000515BI0100001122 | 150 | SqM. |
|---|
| 11 | 11 | (II) Cement concrete with 30 mm down graded shingles excluding shuttering. \nN.B. Variety\nIn ground floor\n(a) 1:3:6 proportion | BI01010001010000000000000515BI0100001123 | 5 | CuM. |
|---|
| 12 | 12 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone\nchips (20 mm nominal size) excluding shuttering and\nreinforcement if any, in ground floor as per relevant IS codes.\n(ii ) River Bazree | BI01010001010000000000000515BI0100001124 | 1 | CuM. |
|---|
| 13 | 13 | Reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection complete as per drawing and direction. a) For works in foundation, basement and upto roof of ground floor/upto 4 m. (i) Tor steel/ Mild steel. I. SAIL/ TATA/RINL | BI01010001010000000000000515BI0100001125 | 0.1 | MT |
|---|
| 14 | 14 | Brick work with 1st class bricks in cement mortar (1:6) \n(a) In foundation and plinth | BI01010001010000000000000515BI0100001126 | 30 | CuM. |
|---|
| 15 | 15 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor | BI01010001010000000000000515BI0100001127 | 25 | Sq.m |
|---|
| 16 | 16 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 15 mm thick plaster | BI01010001010000000000000515BI0100001128 | 200 | SqM. |
|---|
| 17 | 17 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 20 mm thick plaster | BI01010001010000000000000515BI0100001129 | 100 | SqM. |
|---|
| 18 | 18 | Neat cement punning about 1.5mm thick in wall,dado,window\nsill,floor etc.\nNOTE:Cement 0.152 cu.m per100 sq.m.. | BI01010001010000000000000515BI0100001130 | 100 | SqM. |
|---|
| 19 | 19 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.\nIn Ground floor\n(iii) Two coats. | BI01010001010000000000000515BI0100001131 | 100 | Sq.m |
|---|
| 20 | 20 | Synthetic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.\nTwo Coats | BI01010001010000000000000515BI0100001132 | 200 | Sq.M |
|---|
| 21 | 21 | Supplying and laying true to line and level vitrified tiles of\napproved brand (size not less than 600 mm X 600 mm X 10\nmm thick) in floor, skirting etc. set in 20 mm sand cement\nmortar (1:4) and 2 mm thick cement slurry back side of tiles\nusing cement @ 2.91Kg./sqM or using polymerised adhesive\n(6 mm thick layer applied directly over finished artificial stone\nfloor/Mosaic etc without any backing course) laid after\napplication slurry using 1.75 Kg of cement per sqM below\nmortar only, joints grouted with admixture of white cement\nand colouring pigment to match with colour of tiles / epoxy\ngrout materials of approved make as directed and removal of\nwax coating of top surface of tiles with warm water and\npolishing the tiles using soft and dry cloth upto mirror finish\ncomplete including the cost of materials, labour and all other\nincidental charges complete true to the manufacturer's\nspecification and direction of Engineer-in-Charge. (White \ncement, synthetic adhesive and grout material to be supplied\nby the contracter)\n(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand\ncement mortar (1:4) & 2 mm thick cement slurry at back side\nof tiles, 0.2 kg/ Sq.m white cement for joint filling with\npigment\n(B) Light Colour | BI01010001010000000000000515BI0100001133 | 250 | SqM. |
|---|
| 22 | 22 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.\n(A) Floor\nWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m \n(ii) Other than Coloured decorative including white | BI01010001010000000000000515BI0100001134 | 150 | Sq.m |
|---|
| 23 | 23 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc(B) Wall \nWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m (a) Area of each tile upto 0.09 Sq.m \n (ii) Other than Coloured decorative including white | BI01010001010000000000000515BI0100001135 | 50 | Sq.m |
|---|
| 24 | 24 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)\n(A) For Exposed Work\n(ii) 25 mm dia. medium quality | BI01010001010000000000000515BI0100001136 | 50 | Mtr |
|---|
| 25 | 25 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)\n(a) For Exposed Work\nPVC Pipes\n(Dia) 25 mm | BI01010001010000000000000515BI0100001137 | 30 | Mtr |
|---|
| 26 | 26 | 15 mm | BI01010001010000000000000515BI0100001138 | 20 | Mtr |
|---|
| 27 | 27 | 50 mm | BI01010001010000000000000515BI0100001139 | 20 | Mtr |
|---|
| 28 | 28 | 100mm | BI01010001010000000000000515BI0100001140 | 40 | Mtr |
|---|
| 29 | 29 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer\n(b) 1000 litre capacity | BI01010001010000000000000515BI0100001141 | 1 | each |
|---|
| 30 | 30 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes & fittings conforming to IS-15778: 2007\n(Q) Ball Valve\n(Dia)\n25 mm\n | BI01010001010000000000000515BI0100001142 | 8 | each |
|---|
| 31 | 31 | Supplying, fitting and fixing bib cock or stop cock.\n(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). | BI01010001010000000000000515BI0100001143 | 8 | each |
|---|
| 32 | 32 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand). | BI01010001010000000000000515BI0100001144 | 12 | each |
|---|
| 33 | 33 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc | BI01010001010000000000000515BI0100001145 | 5 | each |
|---|
| 34 | 34 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.\nb) With 'S' trap | BI01010001010000000000000515BI0100001146 | 5 | each |
|---|
| 35 | 35 | (c) Chromium plated Hand shower 70mm dia Round Shape Single flow\nwith Flexible Tube & fittings(Equivalent to Code No. ESH-5512 & Model Tropical / Sumthing Special of ESSCO or similar). | BI01010001010000000000000515BI0100001147 | 5 | each |
|---|
| 36 | 36 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).\n(vii) 25 mm dia | BI01010001010000000000000515BI0100001148 | 2 | each |
|---|
| 37 | 37 | Supplying, fitting and fixing pillar cock of approved make.\na) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand). | BI01010001010000000000000515BI0100001149 | 4 | each |
|---|
| 38 | 38 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.\n(ii) 470 mm X 280 mm X 340 mm | BI01010001010000000000000515BI0100001150 | 5 | each |
|---|
| 39 | 39 | Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge.\nIn ground floor.\n | BI01010001010000000000000515BI0100001151 | 3 | Sq.M. |
|---|
| 40 | 40 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,PartI.Payment will be made separetly on the basis of actual height based on relevant\nI.S.Code\n(i) For 10 users\nB) With Bazree (N.B Varity) (SAIL/TATA/RINL) | BI01010001010000000000000515BI0100001152 | 1 | each |
|---|
| 41 | 41 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.\n(SAIL/TATA/RINL) | BI01010001010000000000000515BI0100001153 | 1 | each |
|---|
| 42 | 42 | Wash basin vitreous china of approved make (without fittings)\nsupplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.\n(i) 450 mm X 300 mm size | BI01010001010000000000000515BI0100001154 | 2 | each |
|---|
| 43 | 43 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.\n(ii) 600 mm X 450 mm | BI01010001010000000000000515BI0100001155 | 3 | each |
|---|
| 44 | 44 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals\n(i) Other Local Wood. | BI01010001010000000000000515BI0100001156 | 0.5 | Cu.M |
|---|
| 45 | 45 | Panel shutter of doors and windows as per design (each panel consisting of single plank without joint) including fitting and fixing the same in position but excluding cost of hinges and other fittings. In ground floor \n i) 35 mm thick shutters with 19 mm th. panel \n a) Local wood | BI01010001010000000000000515BI0100001157 | 10 | Sq.M. |
|---|
| 46 | 46 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. \n (vii) 75mm x 47mm x 1.7mm | BI01010001010000000000000515BI0100001158 | 30 | Each |
|---|
| 47 | 47 | Anodised aluminium barrel/tower/socket bolt (full covered) of approved quality manufactured from extrended section conferming to IS 204/74 fitted and fixed with cadmium plated screws.\n (i) 100mm long x 10mm dia. | BI01010001010000000000000515BI0100001159 | 10 | Each |
|---|
| 48 | 48 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:\n(a) With continuous plate base (Hexagonal/ Round rod)\n(vi) 150 mm grip x 10 mm dia rod. | BI01010001010000000000000515BI0100001160 | 20 | Each |
|---|
| 49 | 49 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.\n(c) 300mm long. | BI01010001010000000000000515BI0100001161 | 4 | Each |
|---|
| 50 | 50 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.\n I) For structural members of specified sections weighing less than\n22.5 Kg./m | BI01010001010000000000000515BI0100001162 | 2.5 | MT |
|---|
| 51 | 51 | Galvanised corrugated iron sheet work (excluding the\nsupporting frame work) fitted and fixed with 10 mm. dia J or\nL hook-bolts, limpet and bitumen washers and putty complete\nwith 150 mm. end lap and one corrugation minimum side lap.\n(Payment to be made on area of finished work)(GCI sheet to\nbe supplied by contractor)\n(i) In Roof:-\nb) With 0.63 mm thick sheet | BI01010001010000000000000515BI0100001163 | 300 | Sq.M. |
|---|
| 52 | 52 | Galvanised corrugated iron sheet work (excluding the\nsupporting frame work) fitted and fixed with 10 mm. dia J or\nL hook-bolts, limpet and bitumen washers and putty complete\nwith 150 mm. end lap and one corrugation minimum side lap.\n(Payment to be made on area of finished work)(GCI sheet to\nbe supplied by contractor)\n(i) In Wall:-\nb) With 0.63 mm thick sheet | BI01010001010000000000000515BI0100001164 | 100 | Sq.M. |
|---|
| 53 | 53 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001165 | 50 | Sq.m |
|---|
| 54 | 54 | (a)Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001166 | 1000 | Sq.m |
|---|
| 55 | 55 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : \n(a) On timber or plaster surface : \nWith other than hi-gloss of approved quality-\n(iv) Two coats (with any shade except white) | BI01010001010000000000000515BI0100001167 | 50 | Sq.m |
|---|
| 56 | 56 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : \n(b) On steel or other metal surface : With super gloss (hi-gloss) -\n(iv) Two coats (with any shade except white) | BI01010001010000000000000515BI0100001168 | 1000 | Sq.m |
|---|
| 57 | 57 | Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430/1510 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 4 mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling Board (Density > 1300 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge.\nIn ground floor\na) False Ceiling (with 4mm thick Fibre Cement Standard Ceiling Board and EGrid T-2430/1510). | BI01010001010000000000000515BI0100001169 | 50 | Sq.M. |
|---|
| 58 | 58 | Labour charge for fabrication and installation of composite door, window , partitions made from annodized extruded alloy aluminium sections for the following units:-(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Poly Shulphate sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleate angle etc. but excluded the cost of extruded aluminium sections, glass, neoprene / EPDM gasketing, locking arrangement and rollers \n i ) 2 track sliding window. | BI01010001010000000000000515BI0100001170 | 2 | SqM. |
|---|
| 59 | 59 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A)In 10-12 Micron thickness Annodizing film I)Natural white \na) 2- track sliding window \n i) Bottom frame | BI01010001010000000000000515BI0100001171 | 2 | M |
|---|
| 60 | 60 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white \na) 2- track sliding window \nii) Top and side frame. | BI01010001010000000000000515BI0100001172 | 6 | M |
|---|
| 61 | 61 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white \n d) Shutter for all track sliding window. \n i) Bottom & Top member. | BI01010001010000000000000515BI0100001173 | 4 | M |
|---|
| 62 | 62 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing film I) Natural white d) Shutter for all track sliding window \nii) Style side member. | BI01010001010000000000000515BI0100001174 | 4 | M |
|---|
| 63 | 63 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white \nd) Shutter for all track sliding window \n iii) Interlock member. | BI01010001010000000000000515BI0100001175 | 2 | M |
|---|
| 64 | 64 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835- 1987iii) 5mm thick clear glass. | BI01010001010000000000000515BI0100001176 | 2 | SqM. |
|---|
| 65 | 65 | Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.i) For sliding windowsb) 'U' shaped EPDM gasket for frames. | BI01010001010000000000000515BI0100001177 | 8 | M |
|---|
