Bso Engg Development Of New A Site Retail Outlet At Kumhari Kadwa Dist Katihar Under Begusarai Divisional Office Of Bihar State Office, Kumhari Kadwa Katihar-Bihar

TDR : 22434959

Tender Notice
BOQ

Expired

Kumhari Kadwa Katihar , Bihar

Tender Brief : Bso Engg Development Of New A Site Retail Outlet At Kumhari Kadwa Dist Katihar Under Begusarai Divisional Office Of Bihar State Office

Document Fees
Refer document

EMD
₹ 127000.0 /-

Tender Value
₹ 1.26 Crore /-

Submission Date
21-11-2019

Competition Type
Indian

Bidding Type
Auction

Need a Business Loan? Apply Now !

Name of Work: Development of New \"A\" Site Retail Outlet at Kumhari, Kadwa, Dist: Katihar under Begusarai Divisional Office of Bihar State Office
1	1	Civil Work (Building, Canopy, Extended Driveway with Hume Pipe Culvert Including Allied Mechanical & Electrical Works) (Other than used in P & M)	b1
2	2	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.	b2
3	3	i) All kinds of Soil	b3	297	M3
4	4	Extra for excavation for every additional lift of 1.5m or part thereof in ALL KIND OF SOIL	b4	34	M3
5	5	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidation each deposited layer by ramming and watering, within premises and lift upto 1.5m	b5	72	M3
6	6	Supplying and Local sand filling within the grading zone V of fine aggregates specified in table 3.1 , clause 3.1.3 of attached specifications, in plinth, under floors etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming watering and dressing complete	b6	95	M3
7	7	Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :	b7
8	8	iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)	b8	11	M3
9	9	v)1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)	b9	12	M3
10	10	viii)1:4:8(1 Cement :4 Coarse Sand : 8 Graded stone aggregate of 40mm)	b10	15	M3
11	11	Centering and shuttering including strutting, propping etc. and removal of form work for PCC	b11
12	12	i) C&S for PCC in foundations,footings,bases of column	b12	79	M2
13	13	Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level	b13
14	14	ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm upto plinth level	b14	37	M3
15	15	Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets,columns, pillars,piers, abutments, posts and struts etc.UP TO FLOOR V LVL excluding cost of centering,shuttering, finishing and reinforcement :	b15
16	16	ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm	b16	3	M3
17	17	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).	b17	16	M3
18	18	Providing and laying RCC work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).	b18	1	M3
19	19	Centering and shuttering including strutting, propping etc. and removal of form for :	b19
20	20	i) Foundations,footings,bases of columns, etc. for mass concrete	b20	110	M2
21	21	v) Columns, Pillars, Piers, Abutments, Posts and Struts.	b21	74	M2
22	22	vii)Vertical and horizontal fins individually or forming box, louver bands facias and eaves boards.	b22	31	M2
23	23	vii) Suspended floors, roofs,landings balconies and access platform with water proof ply 12mm thick.	b23	98	M2
24	24	vii)Lintels, beams, plinth beams, girders, bressumers , columns, cantilevers. with water proof ply 12mm thick.	b24	64	M2
25	25	Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels	b25
26	26	ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786	b26	4315	KG
27	27	Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :	b27
28	28	ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH	b28	35	M3
29	29	iv) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand) in superstructure ABVOE PLINTH & UP TO FLOOR V LEVEL	b29	21	M3
30	30	x) Half brick masonry in Cement mortar 1:4 (1 cement : 4 coarse sand) superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL	b30	43	M2
31	31	Providing and laying Dry brick on edge flooring in required pattern with bricks of Class designation 75 on a bed of 12mm mud mortar including filling joints with fine sand complete.	b31	82	M2
32	32	Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters,sills,facias,Pump Island & similar locations of required size of shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement mixed with matching pigment,epoxy touch ups, including rubbing,curing moulding & polishing to edge to give high gloss finish etc. complete at all levels.	b32
33	33	iv) Granite of any colour and shade having Area of slab over 0.50 sqm	b33	7	M2
34	34	Providing & fixing MS grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.	b34	282	KG
35	35	Providing & fixing chrome plated brass100mm mortise latch with one dead bolt with 6 levers & a pair of lever handles with necessary screws etc. complete (best make of approved quality).	b35	3	EA
36	36	Providing and fixing chrome plated brass hanging type floor door stopper with necessary screws, etc. complete.	b36	3	EA
37	37	Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.	b37	3	EA
38	38	Providing & fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868 )transparent or dyed to required colour or shade with necessary screws etc. complete :	b38
39	39	i) 250 x10 mm	b39	6	EA
40	40	ii) 200x10 mm	b40	8	EA
41	41	Providing & fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868)transparent or dyed to required colour or shade with necessary screws etc. complete :	b41
42	42	i) 125 mm	b42	14	EA
43	43	Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	b43	1000	KG
44	44	Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:	b44	10200	KG
45	45	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length,jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire as per IS 4454 Part-I & M.S. top cover of required thickness for rolling shutters:- 80x1.25mm MS laths with1.25 mm thick top cover.	b45	31	M2
46	46	Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in- charge.(area of grill to be measured).	b46	7	M2
47	47	i) Hot finished welded type tubes.	b47	1850	KG
48	48	Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). TILES OF DARK SHADE USING ORDINARY CEMENT	b48	37	M2
49	49	Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness as specified by the manufacturer ) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade.	b49	56	M2
50	50	Providing & laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete.	b50	12	M2
51	51	Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand, including grouting the joints with white cement and matching pigments etc., complete for flooring/skirting as specified.	b51
52	52	i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4	b52	28	M2
53	53	iii) Skirting with size of Tiles 60x60Cm in Cement mortar 1:3	b53	11	M2
54	54	KLIPPON GALVALUME PLAIN SHEET RIDGES	b54	13	M2
55	55	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes.	b55
56	56	ii) 110 mm diameter	b56	33	M
57	57	160MM PVC RAIN WATER PIPE	b57	30	M
58	58	150F/200F FALSE CEILING	b58	168	M2
59	59	Providing and laying cement plaster on surfaces with Coarse sand including curing etc.	b59
60	60	ii) 12mm Cement plaster of mix1:6 (1 cement: 6 coarse sand)	b60	328	M2
61	61	i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand)	b61	132	M2
62	62	Providing Neat cement punning	b62	10	M2
63	63	Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete	b63	459	M2
64	64	Applying one coat of cement primer of approved brand and manufacture on wall surface :	b64	184	M2
65	65	Finishing walls with Acrylic Smooth exterior paint of required shade with Two or more coat applied @ 1.67 ltr/10 sqm over & including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.	b65	133	M2
66	66	Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade with 2 or more coats	b66	184	M2
67	67	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture.	b67	268	M2
68	68	Lettering with paint of approved colour and brand (unit/letter/cm ht)	b68	500	EA
69	69	Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mixer plant at Optimum Moisture Content, carriage of mixed material by tippers to work site, for all lead and lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and roller to achieve the desired density, complete as per specification compacting with vibratory power & direction of Engineer-in-charge.	b69
70	70	iii) With material confirming to grade-I (size 26.5 mm to .075 mm) having CBR value -20, Thickness as desired	b70	240	M3
71	71	Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to .075 mm) to wet mix macadam (WMM) specifications including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub-base/base course on well prepared surface and compacting with vibratory roller of 8 to 10 ton capacity to achieve the desired density, complete as per specifications of Engineer-in- charge	b71	252	M3
72	72	i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern.	b72	2	EA
73	73	i) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.	b73	4	EA
74	74	Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan)with seat lid with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend 20mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.	b74	4	EA
75	75	Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.	b75	4	EA
76	76	Providing & fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete	b76
77	77	iv) With Flexible pipe of 40 mm dia	b77	4	EA
78	78	Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.	b78	4	EA
79	79	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall	b79
80	80	i) B class 15 mm dia nominal bore	b80	20	M
81	81	ii) B class 20 mm dia nominal bore	b81	120	M
82	82	ii) B class 25 mm dia nominal bore	b82	28	M
83	83	v) 40 mm nominal outer dia .Pipes.	b83	42	M
84	84	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.	b84
85	85	ii) 20 mm nominal outer dia .Pipes.	b85	27	M
86	86	iii) 25 mm nominal outer dia .Pipes.	b86	32	M
87	87	Providing and fixing B class G.I. pipes complete with G.I. fittings & clamps, i/c cutting & making good the walls etc. Internal work Exposed on wall.	b87
88	88	i) B class 15 mm nominal outer dia .Pipes.	b88	12	M
89	89	Providing and fixing brass bib cock of approved quality :	b89
90	90	i) 15 mm nominal bore	b90	4	EA
91	91	Providing and fixing brass stop cock of approved quality :	b91
92	92	i) 15 mm nominal bore	b92	4	EA
93	93	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :	b93
94	94	i) 25 mm nominal bore	b94	1	EA
95	95	iii) 40 mm nominal bore	b95	1	EA
96	96	Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design,With Common burnt clay bricks of class designation 75	b96	12	EA
97	97	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank	b97	1000	L
98	98	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty	b98
99	99	ii) 150 mm dia. R.C.C. pipe	b99	50	M
100	100	iv) 300 mm dia. R.C.C. pipe	b100	40	M
101	101	Providing and laying non-pressure NP3 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc.complete: Medium Duty, Laying Mechanically/manual	b101
102	102	iii) 1200 mm dia. R.C.C. pipe	b102	35	M
103	103	Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.with common burnt clay bricks of class designation 75	b103	1	EA
104	104	Boring, Providing & installing cast in situ single under reamed piles of specified diameter and length below pile cap in M 25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :	b104
105	105	i) 300 mm dia piles	b105	88	M
106	106	Extra over item for Single UR pile for providing additional bulb in under reamed piles, under specified dia meter (Only the quantity of extra bulbs are to be paid).	b106
107	107	i) 300 mm dia piles	b107	14	EA
108	108	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately.	b108
109	109	i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections	b109	280	KG
110	110	iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)	b110	171	KG
111	111	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):	b111
112	112	i) With float glass panes of 4.0 mm thickness	b112	1	M2
113	113	ii) With float glass panes of 6.0 mm thickness	b113	32	M2
114	114	iii) With float glass panes of 8.0 mm thickness	b114	4	M2
115	115	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot & single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.	b115
116	116	i) With stainless steel cover plate	b116	1	EA
117	117	Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.	b117
118	118	i) Powder coated minimum thickness 50 micron aluminium tubular handle bar.	b118	2	EA
119	119	Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge :	b119
120	120	v) 25mm dia x 1000mm long with 100 mm dia x 8 mm thick plate	b120	40	EA
121	121	Boring/drilling bore well of required dia for casing/ strainer pipe by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge,	b121
122	122	i) Up to 300mm dia in all type of soil up to 90m depth below ground	b122	90	M
123	123	vii) Up to 300mm dia in all type of soil 90m to 150m depth	b123	10	M
124	124	Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticised PVC medium well casing(CM) pipe of required dia,conforming to IS:12818, including required hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.	b124
125	125	ii) 110 mm nominal size dia.	b125	15	M
126	126	Supply and packing Gravel in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.	b126	1	M3
127	127	Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:	b127
128	128	ii) 150 mm dia	b128	1	EA
129	129	Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete	b129
130	130	ii) 150 mm dia clamp	b130	1	EA
131	131	Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).	b131
132	132	ii) 150 mm dia	b132	1	EA
133	133	Providing & laying 80mm thick factory made Lacquered finish Grey/ Coloured Pre-cast cement concrete, interlocking paver block of M 40 grade made by block making machine with strong vibratory compaction & of approved size and design/ shape ,shade and manufacturers and as per IOCL's specifications. The paver blocks shall have peripheral chamfer, with average crushing strength than 40 N/Sq.mm as per IS15658 maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length & width and +/- 3mm on thickness. The job includes supplying & laying a layer of 50mm thick clean course sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand,compacting with machine vibrator to required line and level, etc. complete .(Payment for provision of edge restraints shall be made separately)	b133	1180	M2
134	134	CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items	b134
135	135	Supply and Laying 3 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of Engineer in charge	b135	610	M
136	136	Supply and Laying 4 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of Engineer in charge	b136	10	M
137	137	Supply and Laying 3 Core x 1.5 sq.mm Copper Cable FRLS as per specifications and direction of Engineer in charge	b137	25	M
138	138	Supply and Laying 3.5 Core x 50 sq. mm Aluminium Cable FRLS as per specifications and direction of Engineer in charge	b138	100	M
139	139	SUPPLY AND LAYING OF FLAT CABLES	b139
140	140	3core, 2.5 sq.mm copper Flat Cable for submersible pump	b140	90	M
141	141	Supplying, fabricating and installing following sizes of perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling and/or fix to steel/RCC columns, beams or any other structure members with MS suspenders, angles, channels, etc complete as per the direction of IndianOil	b141
142	142	S/F/I Perforated GI trays of 200mm x 50mm x 2mm with bends, tees, cross members etc. as per specifications and direction of Engineer in charge	b142	150	M
143	143	Supply & Fixing of Weatherproof (IP-65) Thermoplastic Cable Junction Box with terminal block fitted inside the box suitable for following cable sizes.	b143
144	144	for 2.5 sq.mm. cable entry size with 9 terminals	b144	1	EA
145	145	Providing, fixing, testing and commissioning of FLP junction box of approved make for cable connection/ jointing.	b145
146	146	For cables 2.5 to 4 sqmm XLPE / AYFY	b146	1	EA
147	147	Providing & fixing flexible copper cable PVC insulated of 16sqmm for connecting the earth grid/earth strip with the crocodile clip including cost of 1no.crocodile clip (for tanker earthing & other job)	b147	2	EA
148	148	12mm thick Rubber floor mat suitable for working on equipment upto 33 KV working voltage of size 2mtr x 1mtr near switchboards, etc as per direction of Engineer In charge	b148	2	M2
149	149	6 mm thick chequered plate on cable trench inside switch room, DG room, earthing pit including cutting, painting, lifting hooks, etc	b149	6	M2
150	150	Supply and fixing of shock treatment chart in English, Hindi & local language framed in glass framework.	b150	1	EA
151	151	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.	b151	35	EA
152	152	Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following. Make of Insulated wires shall be as per approved make	b152
153	153	Sub-main/power wiring with PVC insulated Copper wire of 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire, as per specifications and direction of Engineer in Charge.	b153	75	M
154	154	5 Amp modular type switch	b154	30	EA
155	155	5 Amp Piano type 3 pin socket	b155	5	EA
156	156	15Amp modular type switch	b156	5	EA
157	157	15Amp modular type 6 pin socket	b157	5	EA
158	158	Supplying and fixing of following MCBs with necessary inter connections on existing DB, Panel board etc.	b158
159	159	Upto 32A DP MCB	b159	9	EA
160	160	Supply and installation of MCB distribution board having Double door complete with tinned cu bus bar, neutral bus bar, earth bar, din bar, interconnection, earthing etc. without incoming isolator and MCBs	b160
161	161	S/I of MCB distribution board /double door with 2+8 way SPN, as per specifications and direction of Engineer in Charge	b161	1	EA
162	162	S/F approved make 4 pole change over switch in 63 Amps., 4 Pole, as per specifications and direction of Engineer in Charge	b162	1	EA
163	163	CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type:1200 mm sweep	b163	4	EA
164	164	EXHAUST FANS -9\" dia light duty, make Khaitan or equivalent	b164	3	EA
165	165	SUBMERSIBLE PUMP Supply,erection,testing & Commissioning of foll.submersible water pump with starter panel board, non return valve, gate valve etc. complete.	b165
166	166	33 LPM 100m head	b166	1	EA
167	167	S/F of 18 Watt RECESS MOUNTED LED Light	b167	8	EA
168	168	S/F of 09 Watt LED Bulb	b168	20	EA
169	169	S/F of 10 MM Granite	b169	16	SQM
170	170	S/F OF ACP SHEET IN ALUM - DOORS	b170	7	SQM
171	171	S/F TOWEL RAIL	b171	4	EA
172	172	S/F SOAP TRAY	b172	4	EA
173	173	HEALTH FAUCET & JET SPRAYS WITH 02 WAY BIB COCK IN TOILET	b173	4	EA
174	174	S/I OF 02 Nos Emergency Shut Down Devices as per OISD 225(One in office room and the other at RO exit on wall ,complete in all respects except cable which will be paid separately)-Emergency stop system shall be provided to cut off the power supply to all metering pumps/ dispensing equipment and associated equipment, other\nthan certified intrinsically safe equipment at PDP and in / on Sales Building. On actuating any of these push buttons, electrical power supply to entire PRO shall be isolated instantaneously. The push button shall be of red colour, mushroom type, marked and a key to open.\n	b174	1	LS
175	175	P/F 100 to 120 W LED LIGHT FITTING UNDER CANOPY	b175	12	EA
176	176	P/F 80 TO 90 W LED LIGHT FITTING UNDER CANOPY	b176	4	EA
177	177	FRP Septic Tank	b177	1	EA
178	178	Providing & fixing BARE Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of bare metal thickness 0.55 mm as per ASTM A446 having yield stress of 275mpa, surface shall have hot dip metallic coating of Aluminium Zinc alloy comprising of 55% aluminium,43.5% zinc & 1.5% silicon, Sheet shall have protective guard film of 25 microns minimum to avoid scratches while transportation & should be supplied in single length up to 6m or as desired by Engineer-in-charge.	b178	168	M2
179	179	P&M Works (Including allied Civil/ Electrical/ Mechanical Works)	b179
180	180	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.	b180
181	181	i) All kinds of Soil	b181	21	M3
182	182	Supplying and Local sand filling within the grading zone V of fine aggregates specified in table 3.1 , clause 3.1.3 of attached specifications, in plinth, under floors etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming watering and dressing complete	b182	26	M3
183	183	Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :	b183
184	184	iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)	b184	2	M3
185	185	v)1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)	b185	3	M3
186	186	Centering and shuttering including strutting, propping etc. and removal of form work for PCC	b186
187	187	i) C&S for PCC in foundations,footings,bases of column	b187	8	M2
188	188	Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level	b188
189	189	ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm	b189	8	M3
190	190	Centering and shuttering including strutting, propping etc. and removal of form for :	b190
191	191	i) Foundations,footings,bases of columns, etc. for mass concrete	b191	35	M2
192	192	Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels	b192
193	193	ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786	b193	550	KG
194	194	Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :	b194
195	195	ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH	b195	16	M3
196	196	Providing and laying Dry brick on edge flooring in required pattern with bricks of Class designation 75 on a bed of 12mm mud mortar including filling joints with fine sand complete.	b196	20	M2
197	197	Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters,sills,facias,Pump Island & similar locations of required size of shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement mixed with matching pigment,epoxy touch ups, including rubbing,curing moulding & polishing to edge to give high gloss finish etc. complete at all levels.	b197
198	198	iv) Granite of any colour and shade having Area of slab over 0.50 sqm	b198	20	M2
199	199	Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:	b199	700	KG
200	200	Steel work in built up tubular trusses including cutting,hoisting fixing in position & applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete.	b200
201	201	i) Hot finished welded type tubes.	b201	150	KG
202	202	Providing and laying cement plaster on surfaces with Coarse sand including curing etc.	b202
203	203	ii) 12mm Cement plaster of mix1:6 (1 cement: 6 coarse sand)	b203	25	M2
204	204	Applying one coat of cement primer of approved brand and manufacture on wall surface :	b204	25	M2
205	205	Finishing walls with water proofing cement paint of required shade with Two or more coats applied @ 3.84 kg/10 sqm	b205	25	M2
206	206	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture.	b206	15	M2
207	207	Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for valves etc., with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With Common burnt clay bricks of class designation 75	b207	5	EA
208	208	Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge :	b208
209	209	ii) 16mm dia x 400mm long with 75 mm dia x 5 mm thick plate	b209	52	EA
210	210	Installation of supplied 20 KL Tank as per specified drawings as per work description but excluding all works of kerb wall and Gasket for manhole complete as per attached specifications. RCC works wherever mentioned shall be of grade M20	b210
211	211	In brick masonry pit with RCC matt under driveway including RCC top slab as per standard Drg. ENG/318.Man hole cover plates and frame to be paid separately .	b211	2	LS
212	212	Supply, fabrication, laying and testing of MS, BLACK, ERW, threaded pipes, heavy class conforming to IS 1239, PART I as per IOCL specifications including pipeline fittings like bends, tee etc as required and as directed for Underground pipeline with doping	b212
213	213	S/L Threaded U/G HD MS Pipes of 80 mm dia with fittings,doping	b213	10	M
214	214	S/L Threaded U/G HD MS Pipes of 40 mm dia with fittings,doping	b214	40	M
215	215	Supply, fabrication, laying and testing of MS, BLACK, ERW, threaded pipes, heavy class conforming to IS 1239, PART I as per IOCL Specifications including pipeline fittings like bends, tee etc as required and as directed for Above Ground pipeline including painting 2 coats of red oxide zinc phosphate primer and 2 coats of Synthetic enamel / aluminium finish paint as per IOCL specifications	b215
216	216	S/L Threaded A/G HD MS Pipes of 80 mm dia with fittings,Painting	b216	2	M
217	217	S/L Threaded A/G HD MS Pipes of 40 mm dia with fittings,Painting	b217	12	M
218	218	Supply, fabrication, laying and testing of MS black, ERW welded, pipes, heavy class conforming to IS 1239, PART I as per IOCL specifications including pipeline fittings like bends, tee etc as required and as directed for Underground pipeline with doping	b218
219	219	S/L Welded U/G HD MS Pipes of 50mm dia with fittings,doping	b219	5	M
220	220	Supply and installation of screwed type gun metal valves as per IOC specifications: Ball Valve	b220
221	221	S/I Cast Steel class 150 Flanged Ball Valve of 50 mm dia with nuts,bolts, gaskets etc as per specifications.	b221	4	EA
222	222	Supply and installation of ‘U’ type CS bend on the vent pipes including painting as per specifications and supplying and brazing wire mesh of 11 mesh per linear centi-meter of non-corrosive metal in two layers on both ends.	b222
223	223	Supply and installation of U type CS bend on vent pipe of 50 mm dia	b223	1	EA
224	224	Installation of supplied Multi Product Pumps / Dispensers on pump island as per manufacturers installation manual, drawings, including supplying, providing necessary frame of ISMC 100, foundation bolts, supplying and filling required quantity of dry sand in	b224
225	225	2 product - 4 nozzle MPPs/MPDs	b225	2	EA
226	226	Air compressor S&I of horizontal air compressor assembly including civil works.	b226
227	227	S/I of Horizontal air compressor Assembly of 3 HP (160-220 LITRES) including civil works	b227	1	EA
228	228	Supply & installation of Digital tyre inflator which is microprocessor based, automatic air pressure controller with solenoid controlled nozzle for automatic fill and release functions. Complete with weather proof cabinet, 3 digit LCD displays with backlight illuminations i.e. one for actual tyre pressure and another for set pressure. Air filter, remote controller, cables, PVC hose pipe and working pressure upto 10bar( Excluding civil work for foundation,etc.)	b228	1	EA
229	229	Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose ( In case of tank same shall be loaded by the tank fabrication contractor). Octroi if any, shall be paid on production of receipt.	b229
230	230	Transportation of Mono/Duo pump/Air Comp./All other pumps (Each) : 0-3	b230	2	LS
231	231	Extra for every additional Km above 30km for item M**ME004907	b231	460	KM
232	232	Transportation of MPD pumps (Each) : 0 - 30 Km	b232	2	LS
233	233	Transportn of Pumps(Each): Extra for every additional Km above 30 km	b233	460	KM
234	234	Supplying & drawing inside the poles 3 core 2.5 sq.mm PVC insulated flexible copper conductor, fixing of junction box at the pole base (excluding supply of JB), making all connections on both ends, all complete as per specification and direction of Engineer In-charge.	b234	13	EA
235	235	Replacing existing manhole gaskets for 15/20/50/70 KL U/G & A/G tanks including disconnecting the pipelines, removing nuts, bolts & manhole cover and supplying and fixing permanite oil gaskets, nuts & bolts and reconnecting the pipeline.	b235	4	LS
236	236	Supply and fixing Pressure Vacuum Valves of 2 inches for fixing to the Vent Pipes of Underground MS tanks. The valve should be in closed position at normal operating pressure of the tank. The Valve shall be capable for activation at set pressure of 3\" ± 0.5 water column to release excess pressure of tank to the atmosphere and open at vacuum of 8\" ± 2.0 water column to induce the atmosphere pressure to the tank. PV valve should be diaphragm of dead weight or spring loaded type or combination of any. The weight of the PV valve shall not exceed 2.0 kg. top of the valve shall be provided with cover/cap/ weather hood to prevent the entry of rain water. Valve material,Cover and adopter shall be of Aluminium/polypropylene, diaphragm if used should be of Neoprene, O ring should be of rubber/neoprene, Net/Mesh Pressure puppet ,Vacuum puppet,screws and spring should be of stainless steel. Suitable adopter with one end fitted with valve and the other end should have threading for fixing on Vent pipe of 40mm. PV valves shall have: UL 842 certification of CARB approval or test certificate from any Govt.lab. PV valve shall have PESO approval.	b236	1	EA
237	237	Installation of Corporation supplied Standard Submersible Turbine Pump on the existing Manhole Cover as per drawing and direction of Engineer in Charge	b237	2	EA
238	238	CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items	b238
239	239	Supply and Laying 3 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of Engineer in charge	b239	600	M
240	240	CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compression cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.	b240
241	241	P/F cable termination for 3 Core x 1.5 sq. mm. with Non FLP double compression glands,lugs etc. as per specifications and direction of Engineer-in charge.	b241	10	EA
242	242	P/F cable termination for 3 Core x 2.5 sq. mm with Non FLP double compression glands,lugs etc. as per specifications and direction of Engineer-in charge.	b242	30	EA
243	243	P/F cable termination for 4 Core x 2.5 sq. mm with Non FLP d double compression glands,lugs etc. as per specifications and direction of Engineer-in charge.	b243	10	EA
244	244	FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination(FLP):Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Beluga/CEAG-FCG /Flexor/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.	b244
245	245	P/F Cable termination for 3 Core x 1.5 sq. mm. with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.	b245	10	EA
246	246	P/F Cable termination for 3 Core x 2.5 sq. mm with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.	b246	46	EA
247	247	P/F Cable termination for 4 Core x 2.5 sq. mm with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.	b247	10	EA
248	248	Providing and laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumen	b248	20	M
249	249	PROVISION OF EARTHING	b249
250	250	Providing earthing with 80 mm dia,3.0 M long GI (Heavy duty) perforated pipe as per IS:3043 (with latest amendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drwng. etc. all complete as per specif. & direction of Engineer-In-charge.	b250	2	EA
251	251	Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following :	b251
252	252	Supply & Laying Earthing 50 x 6 mm G.I. Strip as per specifications and direction of Engineer in Charge.	b252	220	M
253	253	Supply & Laying Earthing 32 x 6 mm G.I.strip as per specifications and direction of Engineer in Charge.	b253	30	M
254	254	Supply & Laying Earthing 25 x 3 mm GI strip as per specifications and direction of Engineer in Charge.	b254	150	M
255	255	Supply & Laying Earthing 10 S.W.G. G.I. Wire (bare) as per specifications and direction of Engineer in Charge.	b255	10	M
256	256	Supplying and providing 100mm square Hansel weather proof junction box for emblem pole/ light pole/yard light	b256	13	EA
257	257	PANEL BOARDS AND DISTRIBUTION BOARDS	b257
258	258	Supply, installation, testing and commissioning of cubicle type power and motor control centre with 6nos of LED type (RYB) indicating lamps, 3 Nos. of ammeters,1No.of voltmeter with selector switch, 3nos. of 100/5A CTs, control fuses, control wiring etc., and to be fabricated out of 16 SWG MS sheet undergone 7 tank process and painted with anticorrosive primer and two coats of grey enamel paint and having following specific components complete as per enclosed standard drawings: 125A FP SFCOS with 125A HRC fuse as incomer-1 No 125A TPN busbar chamber with Aluminium bus 63A TPN SDFU with 50A HRC fuse as outgoings - 4 Nos 63A 100mA RCBO (MCB+ELCB) - 3 Nos. 63A 300mA RCBO (MCB+ELCB) - 1 No. 6-32A SP MCB - 40 Nos. 10A DP MCB - 12 Nos. 25A TP MCB - 3 Nos. Dummy plates - 23 Nos.	b258	1	EA
259	259	Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following. Make of Insulated wires shall be as per approved make	b259
260	260	Sub-main/power wiring with PVC insulated Copper wire of 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire, as per specifications and direction of Engineer in Charge.	b260	55	M
261	261	Supplying & drawing inside the poles 3 core 2.5 sq.mm PVC insulated flexible copper conductor, fixing of junction box at the pole base (excluding supply of JB), making all connections on both ends, all complete as per specification and direction of Engineer In-charge.	b261	13	EA
262	262	OCTAGONAL POLES Supply & Fixing of Octagonal Poles of following type (Civil job shall be paid separately) :	b262
263	263	S/E of 5 Meter high galvanised Octagonal pole with top 60mm (A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 210 x 210 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides)	b263	13	EA
264	264	6V, 10AH dry rechargeable battery	b264	2	EA
265	265	DISPENSING PUMP CONNECTIONS	b265
266	266	Providing dispensing pump power circuit connection with copper conductor single core PVC sheathed wire as per recommendations of the pump manufacturer (make of pumps: L&T /MIDCO /AVERY / Tatsuno/ Nouvopignone)	b266	2	EA
267	267	Supply and Laying of 50 mm dia single wall flexible piping system comprising of Non-metallic HDPE (flexible) pipelines as per IOCL specifications and with manufacturer supplied fittings including all bends, tees, elbows, reducers, end connectors at DU & tank side etc and as required for complete underground piping job. The joints in the pipelines, except the end connections at tanks and dispensers shall be made by electro-fusion welding. The pipes shall be suitable for use with petroleum and ethanol blended fuels. The maximum operating pressure shall be 7Kg/sq.cm. Note: The make of HDPE Pipe should be CCOE approved. Pressure testing shall be done before the final backfilling. The civil works for installation viz. excavation, sand filling & back filling etc. shall be paid seperately. All metallic parts in the piping system shall be grounded as per the requirements of EN14125.	b267	100	RM
268	268	S/F OF FRP TANK MANHOLE COVER OF 900 MM DIA	b268	4	EA
269	269	S/I OF FRP TANK MANHOLE COVER HANDLE	b269	1	EA
270	270	INSTALLATION CHARGE FOR INSTALLATION OF FRP MANHOLE COVER	b270	4	EA
271	271	Supply & Fixing of 90 to 100W LED fixtures with fittings and accessories for yard lighting purposes. The LED (Light emitting diode) of 100W should be operating under voltage range of 140-277V with power factor more than 0.9CCT (Correlated colour temperature) shall be 5700 Kelvin (5665K +/- 335K), CRI (Colour rendering index) not less than 65 and LED efficacy of minimum 120 Lumens / watt. The fittings shall conform to IP65 protection class with under pressure die cast Aluminium housing with 4mm thick toughened glass. The luminaire system should have a minimum efficacy of 90 Lumens per watt. The driver shall be of constant current type with internal surge protection. Supply of complete fitting with all accessories as per specifications attached and as per direction of engineer in-charge. Light fittings shall be shipped from the manufacturer's warehouse directly to Indian Oil site irrespective of quality and location of IOC's site. Each lot of fittings shall accompany test certificates LM79 / IS:16106 and reference / Batch Nos of LEDs & fittings for vertification at site.	b271	21	EA
272	272	Intelligent Line Conditioner (ILC),Supply, Installation and Commissioning of IGBT based Static Voltage Stabilizer of Capacity 15kVA Three Phase with three phase surge protection device and Manual bypass switch; Voltage regulation done by High Frequency(20kHz) PWM driven IGBT.ensuring that the output voltage complies with the requirements of ITIC curve for regulated voltage supply to electronic machineryby superimposing generated wave on input wave, without any break or switching in the power path, current interruption, transition or step changingNo moving part like Relay or Brush to be used for voltage regulation; The Architecture to be fully Solid State; The output voltage must be free of harmful all spikes and EMI/RFI noises; Full Regulation Input Voltage Range 170-290VAC L-N: 295-505VAC L-L; Full Regulation Output Voltage 230VAC L-N ±1%: 400VAC L-L ±1%; Relaxed Regulation Input Voltage Range 140-300VAC L-N: 245-515VAC L-L; Relaxed Regulation Output Voltage 200-240VAC L-N; Operation Frequency 47-53Hz; Correction Speed at least 6000V/s; Efficiency at least 96% even at partial load; MCB at Input; Contactor at Output; Manual Bypass Switch; Overload, Short- Circuit, Double Phase, Overvoltage (at 300VAC L-N), Undervoltage (at 140VAC L-N) Protections; Class II Surge Protection on all three phases independently, for at least 6kV, 8x20??s waveform; Ingress Protection at least IP20; Class H Insulation for Galvanic Components; Digital Annunciation for status; Operating Temperature 0-60° C	b272	1	LS
273	273	As built Drawing for Cable Route & Earthing Layout, Complete site layout clearly showing tanks, sales building, Hoarding, Pipelines, Monolith. Size of Strip and cable size to be shown in layout. Three set of drawing in A3 Size to be submitted. Autocad drawing shall be provided by IOCL for developing these layouts.	b273	1	LS
274	274	As built Drawing for Pipline Route in Complete site layout clearly showing tanks and DU, Filling point all with different colors. Three set of drawing in A3 Size to be submitted. Autocad drawing shall be provided by IOCL for developing these layouts.	b274	1	LS

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Bihar Tenders

Construction Tenders

Excavation Tenders

Land Development Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Bso Engg Development Of New A Site Retail Outlet At Kumhari Kadwa Dist Katihar Under Begusarai Divisional Office Of Bihar State Office, Kumhari Kadwa Katihar-Bihar

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Bso Engg Development Of New A Site Retail Outlet At Kumhari Kadwa Dist Katihar Under Begusarai Divisional Office Of Bihar State Office, Kumhari Kadwa Katihar-Bihar

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us