| 1 | 1 | Demolition of reinforced cement concrete as in roof, beam, etc. and in any position not otherwise specifically provided for complete all as specified and directed. | | 8 | Cum |
|---|
| 2 | 2 | Material and labour for reinforced cement concrete 1:1/2:3 type A-1 using 20mm graded crushed trap stone aggregate for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. | | 8 | Cum |
|---|
| 3 | 3 | Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. | | 60 | Kg |
|---|
| 4 | 4 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. | | 750 | Kg |
|---|
| 5 | 5 | Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished, flat surfaces of concrete complete all as specified and directed. | | 60 | Sqm |
|---|
| 6 | 6 | Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for rough finished, flat surfaces of concrete complete all as specified and directed. | | 12 | Sqm |
|---|
| 7 | 7 | Demolition of existing water proofing treatment, any type from top surface of roof slab and remove the material obtained to low lying area complete all as specified and as directed. | | 20 | Sqm |
|---|
| 8 | 8 | Material and labour for water proofing treatment using 4mm thick APP modified membrane consisting five layer membrane with features as specified weighing not less than 4kg per Sqm laid over a coat of cold applied bituminous primer @ 0.4liters per sqm on surface to provide a layer of APP membrane by torching applications including sealing the overlap while torching with 150mm on length side and 100mm wide side as per manufacturer’s instructions including joints and change in directions be curved with cement mortar 1:3 mixed with SBR latex @ 200ml/bag of cement cured well before laying of membrane and provide a finishing coat with solar reflective bituminous aluminium paint @ 0.1kg per sqm complete all as specified and as directed. | | 90 | Sqm |
|---|
| 9 | 9 | Material and labour for plain cement concrete 1:2:4, type B-0 using 12.5mm graded crushed trap stone aggregate as in padding over flat roof 25mm average thick, finished even and smooth without using extra cement complete all as specified and directed. | | 2 | Cum |
|---|
| 10 | 10 | Taking down cement plaster of any description, thickness including raking out joints hacking for key scrubbing down with water complete all as specified and as directed. | | 250 | Sqm |
|---|
| 11 | 11 | Material and labour for 15mm thick rendering in cement mortar 1:6 on fair faces of bricks or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed. | | 60 | Sqm |
|---|
| 12 | 12 | Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of bricks or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. | | 150 | Sqm |
|---|
| 13 | 13 | Material and labour for 10mm thick rendering in cement mortar 1:3 on fair faces of bricks or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. | | 112 | Sqm |
|---|
| 14 | 14 | Supply only integral water proofing compound complete all as specified and as directed. | | 42 | Kg |
|---|
| 15 | 15 | Material and labour for applying three coats of (lime) white wash including preparation of new plastered surfaces of wall complete all as specified and as directed. | | 30 | Sqm |
|---|
| 16 | 16 | Material and labour for applying two coats of oil bond distemper over a coat of white (lime) wash including preparation of new plastered surfaces of wall complete all as specified and as directed. | | 30 | Sqm |
|---|
| 17 | 17 | Material and labour for applying one coat of oil emulsion distemper on old decorated surface of wall including preparation of surface by washing, rubbing down, and stopping of distempered and painted surface complete all as specified and directed. | | 100 | Sqm |
|---|
| 18 | 18 | Material and labour for applying three coats of (lime) white wash including preparation of new plastered surfaces of ceiling complete all as specified and as directed. | | 112 | Sqm |
|---|
| 19 | 19 | Material and labour for applying two coats of cement base paint including preparation of new plastered surfaces of wall complete all as specified and as directed. | | 150 | Sqm |
|---|
| 20 | 20 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.5Sqm each complete all as specified and directed. | | 45 | Each |
|---|
| 21 | 21 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. | | 18 | Each |
|---|
| 22 | 22 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed. | | 12 | Each leaf |
|---|
| 23 | 23 | Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed. | | 40 | Each leaf |
|---|
| 24 | 24 | Taking down shutters of any description (aluminium/ wooden window) not exceeding 1 Sqm each and refixing in same opening complete all as specified and directed. | | 20 | Each leaf |
|---|
| 25 | 25 | Taking down shutters of any description (aluminium/ wooden door) exceeding 1 Sqm but not exceeding 2 Sqm each and refixing in same opening complete all as specified and directed. | | 12 | Each leaf |
|---|
| 26 | 26 | Supply and fix 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fitted to opening complete all as specified and directed. | | 1 | Cum |
|---|
| 27 | 27 | Supply and fix factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplied and fitted to frame at site as per specification and drawing shown in SSR Part II complete all as specified and directed. | | 30 | Sqm |
|---|
| 28 | 28 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube supplied and fitted to opening as per specification and drawing shown in SSR Part II complete all as specified and directed. | | 75 | RM |
|---|
| 29 | 29 | Supply and fix 35mm thick, 2nd class hard wood rail and style plain framed, factory made paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkats complete all as specified and directed. | | 30 | Sqm |
|---|
| 30 | 30 | Material and labour for 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing gauze or glass etc size of members of shutters as specified in SSR Part-I section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed. | | 25 | Sqm |
|---|
| 31 | 31 | Supply and fix powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. | | 250 | Kg |
|---|
| 32 | 32 | Supply and fix powder coated aluminium window and ventilator shutters, fixed, open-able or sliding type without sash bar, aluminium section weighing not less than 0.55kg/m including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc. complete all as specified and as directed. | | 40 | Sqm |
|---|
| 33 | 33 | Material and labour for 25mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing gauze or glass etc. size of members of shutters as specified in SSR Part-I section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed | | 25 | Sqm |
|---|
| 34 | 34 | Supply and fix 25mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with wooden lipping complete all as specified and as directed. | | 12 | Sqm |
|---|
| 35 | 35 | Supply and fix 18/19mm thick block board Gde-1 quality exterior grade commercial type fixed with screw to timber frame as in cup board, selves, drawer, etc. or in narrow width not exceeding 15cm, with and including 6mm thick teak wood lipping fixed with nails in repairs complete all as specified and directed. | | 5 | Sqm |
|---|
| 36 | 36 | Supply and fix aluminium alloy wire cloth 0.45 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples/ wooden beads in repairs to existing shutter of any description complete all as specified and directed. | | 20 | Sqm |
|---|
| 37 | 37 | Supply and fix aluminium alloy wire cloth 0.45 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples/ wooden complete all as specified and directed. | | 25 | Sqm |
|---|
| 38 | 38 | Hacking out old broken glass (any thickness size quality or description) from wooden or steel frame glazed fixed with putty or fixed with beads etc complete all as specified and as directed. | | 5 | Sqm |
|---|
| 39 | 39 | Supply and fix 5.5mm thick sheet glass ordinary quality and glazing with aluminium beading and rubber packing in square not exceeding 0.5 Sqm each pane complete all as specified and directed. Note: Cost of aluminium beading and rubber packing included under serial item No 32 here in before. | | 5 | Sqm |
|---|
| 40 | 40 | Supply and fix 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm each pane complete all as specified and directed. | | 25 | Sqm |
|---|
| 41 | 41 | Supply and fix 4mm thick figured glass pin head type glazed with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed. | | 4 | Sqm |
|---|
| 42 | 42 | Supply and fix 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. | | 120 | Each |
|---|
| 43 | 43 | Supply and fix 75mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. | | 100 | Each |
|---|
| 44 | 44 | Supply and fix 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. | | 120 | Each |
|---|
| 45 | 45 | Supply and fix 125mm size aluminium handles, cast type, anodised complete all as specified and as directed. | | 60 | Each |
|---|
| 46 | 46 | Supply and fix 150mm size aluminium handles, cast type, anodised complete all as specified and as directed. | | 120 | Each |
|---|
| 47 | 47 | Supply and fix 250 mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. | | 18 | Each |
|---|
| 48 | 48 | Supply and fix cast iron body door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg fixed in repair complete all as specified and as directed. | | 10 | Each |
|---|
| 49 | 49 | Supply and fix 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate fixed in repair complete all as specified and directed. | | 12 | Each |
|---|
| 50 | 50 | Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed. | | 150 | Sqm |
|---|
| 51 | 51 | Material and labour for applying one coat (finishing coat) synthetic enamel paint on old painted wood based surfaces of any description not otherwise described, over 10cm width or girth including preparation of surfaces complete all as specified and directed. | | 50 | Sqm |
|---|
| 52 | 52 | Demolition of cement concrete (unreinforced) concrete in ground floors and paving not exceeding 15cm thickness (below or above ground floors) complete all as specified and directed. | | 3 | Cum |
|---|
| 53 | 53 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed. | | 60 | Sqm |
|---|
| 54 | 54 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring etc complete all as specified and directed. | | 45 | Sqm |
|---|
| 55 | 55 | Material and labour for coloured nonskid ceramic designer pattern tiles of size 400mm x 400mm x 7mm thick, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. | | 45 | Sqm |
|---|
| 56 | 56 | Material and labour for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick laid in vertical surfaces of wall such as skirting, dados and riser to step set and jointed in neat cement slurry and pointed in white or colour cement to match the tile surface laid over and including10mm thick backing coat in cement mortar 1:4 complete all as specified and directed. | | 30 | Sqm |
|---|
| 57 | 57 | Taking down or up 15mm bore steel tubing and connections complete all as specified and directed. | | 100 | RM |
|---|
| 58 | 58 | Taking down or up 20mm bore steel tubing and connections complete all as specified and directed. | | 40 | RM |
|---|
| 59 | 59 | Supply and laying 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed. | | 100 | RM |
|---|
| 60 | 60 | Supply and laying 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed. | | 40 | RM |
|---|
| 61 | 61 | Supply and fix 20mm dia CPVC brass elbow (3/4x1/2) complete all as specified and directed. | | 25 | Each |
|---|
| 62 | 62 | Supply and fix 20mm dia CPVC brass Tee complete all as specified and directed. | | 6 | Each |
|---|
| 63 | 63 | Supply and fix 25mm dia CPVC male brass threaded adaptor (MTA/ MBTA) complete all as specified and directed. | | 6 | Each |
|---|
| 64 | 64 | Supply and fix 20mm dia CPVC male brass threaded adaptor (MTA/ MBTA) complete all as specified and directed. | | 8 | Each |
|---|
| 65 | 65 | Supply and fix 20mm dia CPVC female brass threaded adaptor (FTA/ FBTA) complete all as specified and directed. | | 4 | Each |
|---|
| 66 | 66 | Supply and fix 25mm dia CPVC tank adaptor complete all as specified and directed. | | 5 | Each |
|---|
| 67 | 67 | Supply and fix 20mm dia CPVC ball valve complete all as specified and directed. | | 5 | Each |
|---|
| 68 | 68 | Supply and fix 25mm dia CPVC ball valve complete all as specified and directed. | | 5 | Each |
|---|
| 69 | 69 | Supply and fix 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repair (Minimum weight 90gms) complete all as specified and directed. | | 100 | Each |
|---|
| 70 | 70 | Supply and fix 15mm bore brass chromium plated fancy type bib taps, with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified and as directed. | | 15 | Each |
|---|
| 71 | 71 | Supply and fix 15mm bore stop cock fancy type brass chromium plated, screwed down high pressure with capstan head screwed both ends for iron pipe or for union and fixed in repair complete all as specified and directed. | | 20 | Each |
|---|
| 72 | 72 | Supply and fix 15mm bore stop cock fancy type brass chromium plated with long shank and cup (Concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe or for union and fixed in repair complete all as specified and directed. | | 9 | Each |
|---|
| 73 | 73 | Supply and fix 15mm bore pillar taps, cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts screwed for iron pipe and fixed in repair complete all as specified and directed. | | 12 | Each |
|---|
| 74 | 74 | Supply and fix aluminium anodized tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed in repair complete all as specified and directed. | | 24 | Each |
|---|
| 75 | 75 | Supply and fix brass chromium plated health faucet with telephonic arm, cord and sprayer fixed in repair complete all as specified and as directed. Make: Jaquar/ Marc/ ESS-ESS. | | 24 | Each |
|---|
| 76 | 76 | Supply and fix 32mm size PVC waste pipe, 1.20m long flexible type for wash hand basin and sink fixed in repair complete all as specified and directed. | | 20 | Each |
|---|
| 77 | 77 | Supply and fix 10 litres capacity PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with and including brackets and PVC flush pipe fixed in repair complete all as specified and directed. | | 24 | Each |
|---|
| 78 | 78 | Dismantling water tanks of any type exceeding 250 litres but not exceeding 500 litres complete all as specified and as directed, | | 8 | Each |
|---|
| 79 | 79 | Dismantling water tanks of any type exceeding 500 litres but not exceeding 1000 litres complete all as specified and as directed, | | 4 | Each |
|---|
| 80 | 80 | Supply and fix 500litres capacity double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed. | | 8 | Each |
|---|
| 81 | 81 | Supply and fix 1000litres capacity double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed. | | 4 | Each |
|---|
| 82 | 82 | Supply and fix 20mm dia ball valves brass high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repair for 20mm dia pipe complete all as specified and as directed. | | 12 | Each |
|---|
| 83 | 83 | Supply and fix PVC connection 15mm bore size with PTMT nuts of length 45cm complete all as specified and directed. | | 50 | Each |
|---|
| 84 | 84 | Supply and fix 150mm size brass chromium plated grating fixed in repair complete all as specified and directed. | | 5 | Each |
|---|
| 85 | 85 | Supply and fix in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580mm x 440mm white with integral foot rest, with and including 100mm size cast iron ‘P’ trap set in concrete, provision of lime concrete bedding, connection to drain (or outgoing pipe) and to flush pipe, antisphonage pipe, etc. complete all as specified and directed. | | 10 | Each |
|---|
| 86 | 86 | Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern) white including providing and fixing bolts, connection to drain (or outgoing pipe) and to flush pipe, antisphonage pipe, etc. complete all as specified and directed. | | 4 | Each |
|---|
| 87 | 87 | Supply and fix plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium plated or aluminium hinging device fixed in repair complete all as specified and directed. | | 4 | Each |
|---|
| 88 | 88 | Supply and fix wash hand basin of size 550mm x 400mm white flat back including 32mm brass chromium plated waste fittings with PVC waste pipe, including cutting for and pinning in ends of brackets with and including provision of brackets fixed in repair complete all as specified and directed | | 4 | Each |
|---|
| 89 | 89 | Supply and fix brass chromium plated shower rose 125mm size with arms fixed in repair complete all as specified and as directed. | | 15 | Each |
|---|
| 90 | 90 | Material and labour for 75mm thick plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection, joint filled with 50mm thick bitumen and sand mixer finished even and smooth without using extra cement complete all as specified and as directed. | | 30 | Sqm |
|---|
| 91 | 91 | Supply and fix 25mm dia aluminium powder coated decorative/ fancy type curtain rod complete all as specified and directed. | | 70 | RM |
|---|
| 92 | 92 | Supply and fix aluminium powder coated decorative/ fancy type brackets for securing curtain rod complete all as specified and directed. | | 60 | Each pair |
|---|
| 93 | 93 | Supply and fix PVC (SWR) floor trap with grating and 75 mm dia of outlet, plain including jointing with solvent cement complete all as specified and as directed. | | 5 | Each |
|---|
| 94 | 94 | Supply and fix PVC (SWR) multi floor trap with grating, 75mm dia of outlet, plain including jointing with solvent cement complete all as specified and as directed. | | 2 | Each |
|---|
| 95 | 95 | Taking up cast iron water mains 80 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. | | 10 | RM |
|---|
| 96 | 96 | Taking up cast iron water mains 100 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. | | 10 | RM |
|---|
| 97 | 97 | Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. | | 10 | RM |
|---|
| 98 | 98 | Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. | | 10 | RM |
|---|
| 99 | 99 | Supply and fix 75 mm dia PVC (SWR) bend complete all as specified and as directed. | | 3 | Each |
|---|
| 100 | 100 | Supply and fix 110 mm dia PVC (SWR) bend complete all as specified and as directed. | | 3 | Each |
|---|
