Sales : +91-777 804 8217
| Name of Work: Construction of new 120 Nos Type-III Qtrs for Nurses staff in Dr. R.P. Govt. Medical College at Tanda in Distt Kangra (HP) Deposit Work (SH:- Construction of 72 Nos. Type-III Qtrs (12 Nos. block) civil work including water Supply & Sanitary Installation, Rain Water Harvesting System and Septic Tank etcetera). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation, trenches etcetera. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, shoring, strutting or bailing out water (Surface and sub soil water) upto any depth or height any quantum of water including de-watering removal of slush, lift upto any height, stacking the excavated soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimetre)layers, when required into plinths, sides of foundation etcetera; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 3938.7 | Per cubic metre | |
| 2 | 2 | Excavation in earth work and filling in 15 cm (Fifteen Centimetres) layers in foundation and plinths including ramming, watering and consolidating upto all leads, lifts and in all classification of soil as directed by the Engineer-Incharge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 2070 | Per cubic metre | |
| 3 | 3 | Excavation in drains and channels etcetera; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, (hard and soft) and work doing in saturated soil including chiseling or wedging out rocks where blasting work is prohibited including shoring, strutting and pumping or bailing out water (Surface and sub soil water) upto any depth or any height, any quantum of water including slush which may arrise during dewatering, any other mixed variety of soil, lift upto any height, stacking the excavated soil for all heights clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers when required into plinths, sides of foundations etcetera; consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specifications, approved drawing, design, and as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 106.18 | Per cubic metre | |
| 4 | 4 | Sand filling under floor including watering, ramming, consolidating and dressing complete as per specification and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 157.87 | Per cubic metre | |
| 5 | 5 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1407.84 | Per square metre | |
| 6 | 6 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings including curved surfaces where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 6670.94 | Per square metre | |
| 7 | 7 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, where ever required, sides and soffits of beams haunchings, cantilevers, bressumers and lintels upto all depths including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 8791.28 | Per square metre. | |
| 8 | 8 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering, strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular or polygonal in plan etcetera; and carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 6731.3 | Per square metre. | |
| 9 | 9 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 399.331 | Per square metre. | |
| 10 | 10 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in edges of slab and breaks in floors and walls under any thickness including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 2866.4 | Per running metre | |
| 11 | 11 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls (any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 146.39 | Per square metre | |
| 12 | 12 | Providing and laying cement concrete 1:4:8 (One cement; four sand; eight graded crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 336.75 | Per cubic metre | |
| 13 | 13 | Stone filling in plinth with hard stone of approved quality under floor including watering, ramming, consolidating and dressing complete and carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 156.75 | Per cubic metre | |
| 14 | 14 | Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum comprassive strength of 20 N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic meter as per approval design mix mechanically mixed and vibrated including curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concrete including etcetera specifications, approved drawing, design and as per the entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 888.77 | Per cubic metre | |
| 15 | 15 | Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic metre, as per approved design mix mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in walls any thickness (but not less than 0.10 m) (Zero decimal one zero metre) including attached pilasters, buttresses, plinth and string courses etc. from the top of the foundation as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 35.95 | Per cubic metre | |
| 16 | 16 | Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum comressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depths/thickness etcetera; upto all floor levels as per specifications, approved drawing, design as per entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 2114.47 | Per cubic metre | |
| 17 | 17 | Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic meter mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depth/thickness for all floors height as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 401.11 | Per cubic metre | |
| 18 | 18 | Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetres) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic metre mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 42.15 | Per cubic metre | |
| 19 | 19 | Providing and laying cement concrete work M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetres) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic metre mechanically mixed and vibrated to give smooth and even surfaces including centring, shuttering but excluding reinforcement as in mouldings, cornices, window sills etcetera to any girth, as per specifications, drawing and design complete, as directed by the Engineer-in-charge.upto floor all levels including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 36.15 | Per cubic metre | |
| 20 | 20 | Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic metre, mechanically mixed, vibrated and curing complete for reinforced concrete Chhajjas for all thickness in all floor levels including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work but excluding the cost of reinforcement for reinforced concrete work up to all floor levels up to all height and as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 47.37 | Per cubic metre | |
| 21 | 21 | Providing Tor steel reinforcement of TATA/Sail/Tisco for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 587099 | Per kilo-gram | |
| 22 | 22 | Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : Six sand : Twelve graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) at plinth level in cement mortar 1:6 (One cement: Six sand) complete, including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 518.57 | Per cubic metre | |
| 23 | 23 | Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints with cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 48.63 | Per cubic metre | |
| 24 | 24 | Providing and laying Damp Proof Course 100mm (One Hundred millimetres) thick with cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate) 12.5mm (Twelve decimal five millimetres nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 160.63 | Per Square metre | |
| 25 | 25 | Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) or equivalent using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 160.63 | Per Square metre | |
| 26 | 26 | Second class brick masonry using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement: Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 2250.72 | Per cubic metre | |
| 27 | 27 | Second class half brick masonry using common brunt clay building bricks in super-structure upto all floor level in cement mortar 1:4 (1 cement :4 sand) with hoop iron and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 5635.2 | Per square metre | |
| 28 | 28 | Providing and fixing 12mm (Twelve millimetres) thick prelaminated board both side bwp phenol bonded exterior/interior grade shutters with frame of first class deodar wood for doors including bright finished piano hinges with 40mm (Forty five millimetres) thick frame upto all floor levels complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1284.12 | Per square metre | |
| 29 | 29 | Providing and fixing 40mm (Forty millimetres) thick second class deodar wood wire gauge shutters using galvanised M.S. wire guage of I.S. Guage designation 85-G with wire of dia 0.56 mm (Zero point five six millimetres) for doors, windows and clearstorey windows including bright finished black enamelled iron hinges with necessary screws upto all floor leves complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 295.2 | Per square metre | |
| 30 | 30 | Providing and fixing 19mm (Nineteen millimetres) thick water proof termit resistant commercial board of Kitply/Duraply for shutter of cup board with 6/12mm (six/twelve five millimetres) thick hard wood edging to be finished with 1mm (One millimetres) thick lamination of century/greenlam/Tera of approved shade fixing with nickel plated piano hinges with necessary screws upto all floor levels complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 442.8 | Per square metre | |
| 31 | 31 | Providing and fixing 19mm (Nineteen millimetres) thick water proof termit resistant commercial board in shelves/box of Kit ply /Centuary/Duraply for cup board including its shelves and all cut portions of the board shall have 6/12mm (Six/Twelve millimetres) thick hard wood edging with butt joints nails & screws etcetera upto all floor levels complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 961.2 | Per square metre | |
| 32 | 32 | Providing and fixing 6mm (Six millimetres) thick wateproof ply wood lining of Kitply/Century ply with butt jointing (frame work and cover fillets to be measured and paid for separately) upto all floor levels complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 309.66 | Per square metre | |
| 33 | 33 | Providing and fixing 19mm (Nineteen millimetres) thick water proof commercial board for SDB shutter of Kitply/Centuary ply and all cut portions of the board shall have 6/12mm (Six/Twelve millimetres) thick hard wood edging and inner side of the shutter shall be finished with 0.63mm (Zero point six three milimetre) thick PGI (plain galvanised iron) sheet lining including fixing with nickel plated piano hinges with screws etcetera upto all floor levels complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 110.7 | Per square metre | |
| 34 | 34 | Providing and laying cement concrete 1:5:10 (1cement : 5 sand; 10 graded crushed stone aggregate 40mm(Forty millimetres) nominal size) mechanically mixed vibrated and curing complete excluding cost of form work in Foundation and plinth complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 15.84 | Per cubic metre | |
| 35 | 35 | Providing and fixing cup-board shutter magnetic catcher with necessary screws etcetera upto all floor levels complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 610 | Each | |
| 36 | 36 | Providing and fixing 65x35mm (Sixty five into Thirty five milimetres) size special quality chromium plated brass cup board lock with six leavers including necessary screws etcetera complete (Indian make) including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 144 | Each | |
| 37 | 37 | Providing and fixing M.S. (mild steel) grill of required pattern in M.S. (mild steel) frames of windows etc with M. S flat 20x5mm (Twenty into Five milimetres), square bars in combination as per detail with round headed bolts and nuts or by screws complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 22894.9 | Per Kilo-gram | |
| 38 | 38 | Providing and fixing 25mm (Twenty five milimetres) dia chromium plated etcetera curtain rod with bracket etcetera where ever required for pelmet with necessary fittings complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1454.4 | Per Running metre | |
| 39 | 39 | Providing and fixing 300x16mm (Three hundred into Sixteen milimetres) size aluminium Pilot/sheel sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 576 | Each | |
| 40 | 40 | Providing and fixing aluminium Tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 41 | 40.1 | 200x10mm (Two hundred into Ten millimetres) nominal size | 1008 | Each | |
| 42 | 40.2 | 150x10mm (One hundred fifty into Ten millimetres) nominal size | 3024 | Each | |
| 43 | 41 | Providing and fixing aluminium Pilot oxidized seccuolar anodized transparent or dyed to required colour and shade handles with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 44 | 41.1 | 125mm (One hundred twenty five millimetres) nominal size | 1296 | Each | |
| 45 | 41.2 | 100mm (One hundred millimetres) nominal size | 2016 | Each | |
| 46 | 41.3 | 75mm (Seventy five millimetres) nominal size | 864 | Each | |
| 47 | 42 | Providing and fixing M.S. (mild steel) hooks and eyes of 250mm (Two hundred fifty millimetres) size of approved quality to required colour and shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1008 | Each | |
| 48 | 43 | Providing and fixing 100mm (One hundred milimetres) bright finished Aluminium floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 360 | Each | |
| 49 | 44 | Providing and fixing 150mm (One hundred fifty millimetres) oxidized M.S. single acting spring hinges with necessary screw etc. complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1872 | Each. | |
| 50 | 45 | White glazed tiles 6mm (Six millimetres) thick in skirting and dado up to all heights laid on a bed of 12mm (Twelve millimetres) thick cement mortar 1:3(One cement :Three sand) finished with flush pointing in white cement complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1729.86 | Per square metre | |
| 51 | 46 | Providing and laying 25mm (Twenty five millimetres) thick Kota Stone flooring (Mirror polished) of 55x55cms (Fifty five into fifty five centimetres) size of approved shade laid over base of cement mortar 1:4(One cement: Four sand) and jointed with Grey cement slurry mixed with pigment to match the shade of the slab in treads steps and landing including rubbing and polishing/moulding single or double, nosing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 602.82 | Per square metre | |
| 52 | 47 | Providing and fixing 10mm thick water proof stain and impect resistent heavy duty vetrified tiles of Somany/Nitco/Rak having size 600x600mmx10mm (Six hundred into Six hundred into ten millimetres) manufactured of approved shade and colour in flooring, skirting and laid over 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 4365.81 | Per square metre | |
| 53 | 48 | Providing and laying anti skid ceramic tiles of Orient/Somany/Rak/kajaria or equivalent as per approved shade in flooring 300x300mm (Three hundred into Three hundred milimetres) size on a bed of 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : three sand) finished with flush pointing in white cement upto all floor levels complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 355.65 | Per square metre | |
| 54 | 49 | Providing and laying 20mm (Twenty miliimetres) thick Marble work (table rubbed and polished) in flooring 2.5 cm (Two point five centimetres) thick in cement mortar 1:3 (1 cement:3 sand) including pointing with cement mortar 1:2 (1 White cement : 2 marble dust) with an admixture of pigment to match the marble shade upto all floor levels complete including moulding, nosing, polishing and carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 162 | Per square metre | |
| 55 | 50 | Providing and laying heavy duty precast cement concrete 60mm (Sixty millimetres) thick inter locking paver blocks ISI marked of NTC IS No 15658 in PVC/fibre moulds with vibro compacted upto M-50(M-Fifteen) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (Twenty five millimetres) thick average thickness of cement mortar 1:4 (One cement : Four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks and curing rubbing & polishing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1927.2 | Per square metre | |
| 56 | 51 | Providing and fixing 0.60mm (Zero decimal Six Zero millimetres) thick prepainted steel sheet TATA / Shakti in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 10 (Ten) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six millimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 3836.02 | Per square metre | |
| 57 | 52 | Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all with 0.60mm (Zero decimal Sixty miliimetres) thick prepainted steel sheet ridges (Factory made) shall be having proper Gola/Shape of steel sheet Tata/ Sakti with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material within all leads, lifts of material and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 372 | Per running metre | |
| 58 | 53 | Providing and fixing valleys 90 cm (Ninety centimetres) over all with 0.60mm (Zero decimal Sixty milimetres) thick prepainted sheet Tata/Shakti in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty)microns primer coating back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 228 | Per running metre | |
| 59 | 54 | Providing and fixing 30 cm (Thirty centimeters) wide 30cm (Thirty centimeters) deep of 0.60mm (Zero decimal six zero millimetres) thick plain G.I. sheet gutter with iron brackets 40x3mm (Forty into Three millimetres) size shall be provided with dome shape grating including bolts, nuts and washers etcetera and making necessary connections with rain water pipe complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 786.15 | Per running metre | |
| 60 | 55 | Providing and fixing plain M.S. (mild steel) B.P. sheet 2mm (Two millimetres) thick fixed in eaves board/ceiling/soffits/including jointing with gas/electric welding in position and applying a coat of red lead primer complete (frame work is to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 4617.72 | Per square metre | |
| 61 | 56 | Providing and fixing 150 mm (One hundred fifty millmetres) dia pipes on wall face P.V.C (D-Plast) rain water pipes of Supreme/Kisan/finolex of working pressure not less than 4.5/6.0 kg/Scm2 (Four point five/six point zero kilograms per sqaure centimetres) high density pipe confiming to IS Code 4985-2000 including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1860 | Per running metre | |
| 62 | 57 | Providing and fixing on wall face P.V.C. (D-plast) acessories for rain water pipes of working pressure not less than 4.5/6.0 kgs/Scm2 (Four pont five/six point zero kilograms per sqaure centimetres) supreme/kisan as per IS mark of supreme/kisan un plastisized PVC D-Plast high denesity pipe for rain water pipe fixed with approved adhesive including filling the joints complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 63 | 57.1 | 150mm (One hundred fifty milimtres)diameteres PVC Plain bend | 296 | Each | |
| 64 | 57.2 | 150mm (One hundred fifty milimtres)diameteres PVC Plain shoe | 296 | Each | |
| 65 | 58 | Providing and fixing galvanised M.S. holder bat clamps of approved design to PVC rain water pipe embedded in cement concrete blocks 10x10x20cm (Ten into ten into twenty centimetres) of 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size including cost of cutting holes and making good the walls etcetera; including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 216 | Each | |
| 66 | 59 | Steel work welded in built up sections, of TATA/TISCO/SAIL in trusses, trussed purlins, main and cross beams, hips jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and; placing in position and applying a coat of red lead paint complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 843.92 | Per quintal | |
| 67 | 60 | Providing and fixing angle iron door frames (Single rebate) manufactured from M.S. angle section of 35x35x4mm (Thirty five into Thirty five into Four milimetres) and M.S, flat 50x4mm (Fifty into four millimetres) as per design and drawing including jambs, lock jambs beeds if required angles threshold of M.S. angle 50x5mm (Fifty into Five milimetres)welded or rigidly fixed by mechanical means lugs with split ends tails to each jambs including steel butt hinges 2.5mm (Two decimal Five milimetres) thick with a provision of locking arrangements and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surfaces including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 2546.1 | Per running metre | |
| 68 | 61 | Providing and fixing angle iron frames manufactured from M.S. Angle iron section 25x25x5mm (Twenty five into Twenty five into Five millimetres) thickness including hinges jamb,lock jamb,beed and if required angle threshold of mild steel angle 25x25x5mm (Twenty five into Twenty five into five millimetres) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two decimal Five millimetres) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface complete in all respect as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 905.4 | Per running metre | |
| 69 | 62 | Providing and fixing door frames manufactured from M.S. channel section 75x40x6 mm (Seventy five into forty into six millimetres) and M.S. flat 75x6mm (Seventy five into six millimetres) as per design and drawing including jamb, lock jamb, beed and if required angle threshold of M.S. angles 50x20 mm (Fifty into twenty millimetres) welded or regidly fixed by mechanical means lugs with split end tails to each jamb including steel butt hinges 2.5 mm (Two point five millimetres) thick with a provision a locking arrangement and shock absorbers as specified and applying a coat of approved primer after pre-treatment of the surfaces including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 7649.6 | Per running metre | |
| 70 | 63 | Providing and fixing factory made double steel shutter windows side hung ( One glazed and other wire gauge) of standard rolled steel section jointing mitered and welded manufactured to relevant ISI standard specification with 16x3.15 (Sixteen into Three point fifteen millimetres) lugs 20cm (Twenty centimetres) long embeded in cement concrete block 1:3:6 (One cement: three sand: Six graded broken/crushed stone aggregate 20mm(Twenty millimeters)nominal size with wooden plugs and screws or rawl plug or fixing with clips, bolts and nuts as required iron fitting including providing and fixing 4mm thick of glass pans with special putty of glazed side of shutter and wire gauge of IS designation 85G (Eighty five-G) with metal beading on other side complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 71 | 63.1 | Side hung windows (One glazed and other wire gauge shutter) | 1752.3 | Per square metre | |
| 72 | 63.2 | Fixed steel windows (Only fixed glazed shtter) | 525.69 | Per square metre | |
| 73 | 64 | Providing and fixing 6mm (six millimetres) thick cement bonded partical board sheet ceiling of approved quality with butt jointing and screws (frame work and cover fillets to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1418.44 | Each | |
| 74 | 65 | Steel work welded in built up sections of TATA/TISCO/SAIL in trusses and framed work including cutting, hoisting, fixing in position in beams, joists, channels, angles, tees flat with connecting plates or angle cleats etcetera in main and cross beams, hips, jack rafters, purlins connect to common rafters and the like including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1125.11 | Per quintal | |
| 75 | 66 | Providing and fixing false ceiling of everest fibre cement and ceiling with frame work of angles and tees including all fittings complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 363.2 | Per square metre | |
| 76 | 67 | Providing and laying double coat water proofing treatment done with Dr. Fixit Torch felt over depressive toilet area including maintain clean and saturated surface a coverage of 6 Sq.ft. (Six) square feet per Kg to achieve 1mm (One milimetre) thickness. This coating shall also be extended upto 300 mm (Three hundred milimetres) vertically. The second coat shall be applied of first coat. Then sprinkle sand on top surface of applied Dr. fixit- Fastflex while stilltacky over the second coat. Then apply cement mortar (1:4) one cement : four sand admixed with 200ml (Two hundred mililitres) of pidiproof LW@200ml/50kg of cement over the floor with the suitable gradient towards drain pipe, while the second coat of Dr. Fixit is still tacky complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 125.52 | Per square metre | |
| 77 | 68 | Providing and fixing 90cms (Ninety centimetres) high balcony railing having 50mm (Fifty millimetre) dia meter hollow pipe railing over 50x4mm (Fifty into four millimetres) M.S (Mild steel) fleat at top of verticaldiagnally balurters having sixe 19x19mm dully welded as per specifications and drawing including one coat of red oxide primer and carriage of material with in all leads, lifts and other incidentals and the rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the goverment. | 194.4 | Per running meter | |
| 78 | 69 | Providing and fixing 300x16mm (Three hundred into Sixteen millimetres) size aluminium Pilot/sheel sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 340 | Each | |
| 79 | 70 | Providing and fixing railing 85cms (Eighty five centimetres) high for stair care having baluster of 19x19mm nineteen into nineteen millimetres) M.S. solid square bras @60Cms (Sixty centimetres) centre to centre embeded in cement concrete steps and jointing with electric/Gas welding at top alongwith hand rail of 50mm (Fifty millimetre) dia M.S. hollow pipe (SWG-16) vertical balustars to welded/jointed with each with 2 nos M.S. flat of 50x5mm (Fifty into five millimetres) at top and bottam and applying priming coat of red load paint complete in all respact as per specifications approved drawing design and as directed by the Engineer-in-Chagre. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 269.57 | Per running metre | |
| 80 | 71 | Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 12652.5 | Per square metre | |
| 81 | 72 | Painting two or more coats (excluding priming coat) with Nerolac/ Asian paint on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 12652.5 | Per square metre | |
| 82 | 73 | Applying priming coat over new wood and wood based surfaces with Nerolac/ Asian paint after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting with ready mixed paint brushing wood primer pink including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 3383.64 | Per square metre | |
| 83 | 74 | Painting two or more coats (excluding priming coat) on over new wood and wood based surfaces with Nerolac/ Asian paint other than white brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters including carriage of material wthin all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 3383.64 | Per square metre | |
| 84 | 75 | 6mm (Six milimetres) thick cement plasters in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights including carriage of material wthin all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 6027.91 | Per square metre | |
| 85 | 76 | 15mm (Fifteen millimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) upto floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 9293.88 | Per square metre | |
| 86 | 77 | 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 9293.88 | Per square metre | |
| 87 | 78 | 15mm (Fifteen millimetres) thick cement plasters in single coat on brick/concrete/stone walls for exterior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement: Five sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 6495.12 | Per square metre | |
| 88 | 79 | 15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:3 (One cement: Three sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 117 | Per square metre | |
| 89 | 80 | Applying Birla J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 31110.8 | Per square metre | |
| 90 | 81 | White washing with slacked lime white on undecorated wall/Ceiling surfaces two coats to give an even shade including thoroghly brooming the surface to remove all dirt, dust, mortar drops and loose scale of lime wash and other foreign matter within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 4148.98 | Per square metre | |
| 91 | 82 | Distempering (two or more coats) with oil bound distemper of Asian paints of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 20466.7 | Per square metre | |
| 92 | 83 | Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 6495.12 | Per square metre | |
| 93 | 84 | Providing under layer for plinth protection of 75mm (Seventy five millimetres) thick bed of dry brick/stone aggregate 40mm (Forty milimertres) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 436.32 | Per square metre | |
| 94 | 85 | Providing plinth protection 50mm (Fifty millimetres) thick cement concrete 1:3:6 (One cement: Three sand: Six graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) including finishing the top surfaces of concrete smooth surfaces including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 436.32 | Per square metre | |
| 95 | 86 | Providing and laying brick bats in soak pit 40mm nominal size as per specifications approved drawing dreesing including carriage of material with in all leads, lifts and other incidantals and further as per the direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 8.22 | Per Cubic metres | |
| 96 | 87 | Construction course rubble hammer dressed ‘U’ shape open surfaces drain with side wall 15x23cms (Fifteen into twenty three centimeters) in cement mortar 1:6 (one cement :six sand) and inside plastering with cement plaster 1:3(one cement :three sand) including earth work and laying 10cm (Ten centimeters) cement concreter in 1:5:10 (One cement: five sand: ten graded) crushed stone aggregate 40mm(Forty millimeters) nominal size and 7.5cm (Seven decimal five centimetres)cement concrete 1:2:4 (One cement: two sand: four graded) crushed stone aggregate 20mm(Twenty millimeters) nominal size and finished with a floating coat of neat cement complete including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 756 | Per running metre | |
| 97 | 88 | Providing and laying cement concrete 1:4:8 (One cement; four sand; eight graded crushed stone aggregate 25mm (TWenty five milimetres nominal size) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth complete including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 7.32 | Per cubic metre | |
| 98 | 89 | Providing and fixing Polythyelene – Aluminium -Polyethylene (PE-AL-PE) composite pressure pipe Kitec /Kisan U.V. stabilized with carbon black Conforming to IS-15450-2004 for water supply including clamp at appropriate spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall including filling the joints with approved adhesive complete as per specifications, approved drawing, design and including entire carriage of material within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 99 | 89.1 | 1216 (16mm (Sixteen millimetres) Outer diameters pipe | 612 | Per running metre | |
| 100 | 89.2 | 1620 (20mm (Twenty millimetres) Outer diameters pipe | 648 | Per running metre | |
| 101 | 90 | Providing and fixing composite end seal compression fittings as per IS-15450-2004 for water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc; including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 102 | 90.1 | 1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) female Thread connector of Kitec /Kisan | 360 | Each | |
| 103 | 90.2 | 1620 x 20 mm (One thousand six hundred twenty into twenty millimetres) female Thread connector of Kitec /Kisan | 360 | Each | |
| 104 | 90.3 | 1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) male Thread connector of Kitec /Kisan | 360 | Each | |
| 105 | 90.4 | 1620 x 20 mm (One thousand six hundred twenty into twenty millimetres) male Thread connector of Kitec /Kisan | 108 | Each | |
| 106 | 90.5 | 1216x16mm (One thousand two hundred sixteen into Sixteen millimetres) Equal Tee of Kitec/Kisan | 288 | Each | |
| 107 | 90.6 | 1620x20mm (One thousand six hundred twenty into Twenty millimetres) Equal Tee Kitec/Kisan | 144 | Each | |
| 108 | 90.7 | 1216 x 15mm (One thousand two hundred sixteen into fifteen millimetres) Female Elbows of Kitec /Kisan | 432 | Each | |
| 109 | 90.8 | 1620 x 20 mm (One thousand six hundred twenty into twenty millimetres) Female Elbow of Kitec/Kisan | 216 | Each | |
| 110 | 91 | Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty millimetres to Forty millimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each. | |
| 111 | 92 | Providing and fixing in trenches P.V.C. Supreme/ Kisan/Finolex pipe soil, waste and ventilating pipes conforming to IS No- 13592-92 fixing with adhesive mixure complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 112 | 92.1 | 110mm (One hundred one millimetres) nominal bore/diametres (2.7 mm (Two point seven millimetres) thick pipe | 1080 | Per running metre | |
| 113 | 92.2 | 75mm (Seventy five millimetres) nominal bore/diametres (2.2mm (Two point two millimetres) thick pipe | 2196 | Per running metre | |
| 114 | 93 | Providing and fixing PVC Clamps of Supreme/Kisan conforming to IS No. 14735-99 of approved design with steel screws and rawl plugs etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 115 | 93.1 | 110mm (One hundred one millimetres) nominal bore/diametres | 360 | Each | |
| 116 | 93.2 | 75mm (Seventy five millimetres) nominal bore/diametres | 720 | Each | |
| 117 | 94 | Providing and fixing PVC pipe plain bend of Supreme/Kisan/Finolex conforming to IS No. 14735-99 including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 118 | 94.1 | 110mm (One hundred ten millimetres) nominal bore/diametres | 144 | Each | |
| 119 | 94.2 | 75mm (Seventy five millimetres) nominal bore/diametres | 432 | Each | |
| 120 | 95 | Providing and fixing P.V.C. tee medium class of Supreme/ Kisan/Finolex Conforming to IS No-14735-99 ISI marked including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 121 | 95.1 | 110mm (One hundred ten millimetres) diametres | 144 | Each | |
| 122 | 95.2 | 75mm (Seventy five millimetres) diametres | 288 | Each | |
| 123 | 96 | Providing and fixing P.V.C. Supreme/ Kisan/Finolex heal rest Conforming to IS No-14735-99 ISI marked including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 124 | 96.1 | 110mm (One hundred ten millimetres) diametres | 72 | Each | |
| 125 | 96.2 | 75mm (Seventy five millimetres) diametres | 144 | Each | |
| 126 | 97 | Providing and fixing P.V.C. Supreme/ Kisan/Finolex Collar ISI marked Conforming to IS No-14735-99 including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 127 | 97.1 | 110mm (One hundred ten millimetres) diametres | 216 | Each | |
| 128 | 97.2 | 75mm (Seventy five millimetres) diametres | 432 | Each | |
| 129 | 98 | Providing and fixing PVC Supreme/ Kisan/Finolex door bend with oval access door, insertion rubber washer 3mm (Three millimetres) dia thick bolts and nuts ISI marked Conforming to IS No-14735-99 complete including fixing with approved adhesive etcetra complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 130 | 98.1 | 110mm (One hundred ten millimetres) diametres | 72 | Each | |
| 131 | 98.2 | 75mm (Seventy five millimetres) diametres | 144 | Each | |
| 132 | 99 | Providing and fixing 100mm(One hundred millimetres) ISI marked PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 216 | Each | |
| 133 | 100 | Providing and fixing PVC double equal branch with oval access door, of Supreme/Kisan/Finolex insertion rubber washer 3mm (Three millimetres) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 134 | 100.1 | 110mm (One hundred ten millimetres) diametres | 216 | Each | |
| 135 | 100.2 | 75mm (Seventy five millimetres) diametres | 432 | Each | |
| 136 | 101 | Providing and fixing Anglo Indian No-2061 of Hindware /Cera of approved shade vitreous china wash down water closet (European type W.C. pan) with internal P or S trap including jointing the trap with soil pipe with approved adhesive complete (seat and cover to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each | |
| 137 | 102 | Providing and fixing PVC 10 (Ten) litres capacity European standard control low level flushing cistern with dual flushing system ISI marked of CERA/Hindware and fittings with a pair of C.I. or M.S. brackets and other fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, C.P. brass handles, union and push button, couplings for connection with inlet,outlet and over flow pipe, 40mm dia C.P. (Cromium Plated) flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each | |
| 138 | 103 | Providing and fixing in position with clamps 32mm (Thirty two millimetres) nominal size internal diametres galvanised steel tubes flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors complete within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 72 | Each | |
| 139 | 104 | Providing and fixing plastic seat solid type and cover for wash down water closet with C.P. brass hinges and rubber buffers matching with shade of European W.C. pan including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each | |
| 140 | 105 | Providing and fixing vitreous china wash basin IS marked No. 1025 (Clair) of Cera / Hindware of approved shade having size 55x40cm (Fifty five into forty centimetres) with single hole for pillar tap and C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each | |
| 141 | 106 | Providing and fixing 610x510mm (Six hundred ten into five hundred ten milimetres) Size bowl depth 200mm (Two hundred millimeters) stainless steel Kitchen sink of Cera/Hindware/Jaquar/Diamond/Unik of approved standard ISI marked with drain board and C.P. waste with C.I or M.S bracket painted white including cutting holes in walls and making good the same including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each | |
| 142 | 107 | Providing and fixing vitreous china pedestal I.S. marked No. 1025 of Cera/Hindware of approved shade for wash basin complete with hole at the back for the reception of pipe and fittings including entire carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each. | |
| 143 | 108 | Providing and fixing 32mm (Thirty two millimetres) nominal size diametres rubber plug for wash basin (Heavy duty ISI marked No. 8931) of Jal/ESS ESS including entire carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 144 | Each | |
| 144 | 109 | Providing and fixing 32mm (Thirty two millimetre) diametre M.I. union of Jal/ESS for wash basin or sink.complete, including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 144 | Each | |
| 145 | 110 | Providing and fixing 32mm (Thirty two millimetres) diametre ISI marked IS No. 8934 of Jal/ESS ESS waste pipe for wash basin or sink including brass check nut complete, including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 144 | Each | |
| 146 | 111 | Providing and fixing 100mm (One hundred millimetres) diametres C.P. (Chromium plated) Grating of Jal/ESS (Heavy duty make ISI marked IS. No. 8934) for gully floor or Nahni trap including entire carriage of material within all leads, lifts and other incidental as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 216 | Each. | |
| 147 | 112 | Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty millimetres) beveled edge mirror of Hindware/Cera of superior glass mounted on 6mm (Six millimetres) thick A.C. (As bertos cement) sheet or ply wood sheet and fixed to wooden plugs with C.P. (Chromium plated) brass screws and washers including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each | |
| 148 | 113 | Providing and fixing 600x20mm (Six hundred into Twenty millimetres) C.P. (Chromium plated) brass Towel rail ISI marked IS No. 8934 of Jal/ESS ESS complete with C.P. (Chromium plated) brass brackets fixed to wooden plugs with C.P. brass screws etcetera including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each | |
| 149 | 114 | Providing and fixing 600x120mm (Six hundred into One hundred twenty millimetres) glass shelf with C.P. (Chromium plated) brass Jal/ESS ESS Jaguar (Heavy duty make ISI marked IS. No. 8934) brackets and guard rail complete fixed to wooden plugs with C.P. (Chromium plated) brass screws including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each | |
| 150 | 115 | Providing and fixing C.P. (Chromium plated) brass toilet paper holder (Heavy duty make ISI marked No- 8934) of Jal/ESS ESS/Jaguar including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each | |
| 151 | 116 | Providing and fixing Chromium plated Jet spray of approved quality and ISI marked No 8934 of Jal / ESS ESS/Jaguar of approved quality and colour with one metre tube including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each | |
| 152 | 117 | Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated PTMT push cock tap of ISI marked IS NO 8934 of Jal / ESS/Jaguar including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each | |
| 153 | 118 | Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated fancy bib tap of ISI marked No. 8934 of Jal / ESS ESS/Jaguar complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 360 | Each | |
| 154 | 119 | Providing and fixing 15mm (Fifteen millimetres) diametres C.P. brass pillar tap with capstan head IS marked No. 8934 of Jal/ESS ESS/Jaguar including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each | |
| 155 | 120 | Providing and fixing 15mm (Fifteen millimetres) diametres brass angle valve without nuts IS marked IS No. 8934 of Jal/ESS ESS/Jaguar as per specifications including entire carriage of material within all leads, lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 360 | Each | |
| 156 | 121 | Providing and fixing C.P. brass full way valve with wheel ISI marked IS No. 8934) of Jal/ESS ESS/Jaguar as per specifications including entire carriage of material within all leads, lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||
| 157 | 121.1 | 15mm (Fifteen millimetres) nominal bore | 72 | Each | |
| 158 | 121.2 | 20mm (Twenty millimetres) nominal bore | 72 | Each | |
| 159 | 122 | Providing and fixing 15mm (Fifteen millimetres) nominal bore C.P. (Chromium plated) brass valve (Horizontal plunger type) of Jal/ESS ESS/Jaguar high pressure with copper plate as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 72 | Each | |
| 160 | 123 | Providing and fixing 15mm (Fifteen millimetres) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetres) length complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 360 | Each | |
| 161 | 124 | Providing and fixing P.V.C. SINTEX water storage tank (Tripple layers) having capacity of 1000 (One thousand) liters of ISI marked IS No. 12701 with G.I. (Galvanised iron) inlet and outlet connection, 15mm (Fifteen millimetres) nominal bore ball valve and mosquito proof P.V.C. cover with locking arrangment including hoisting upto all heights above ground level as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 36 | Each | |
| 162 | 125 | Providing and fixing 150mm (One hundred fifty millimetres) nominal bore/diametres to level or slopes PVC pipe ISI marked or its equivalent for sewerage line including joint with approved adhesive complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 400 | Per running metre | |
| 163 | 126 | Construction of manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/ stone aggregate 40mm(Forty millimetres nominal size) inside plastering 15mm (Fifteen millimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimetres) 500mm(Five hundred millimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred ten millimetres) internal dimensions. Total weight of cover and frame should be 38 Kgs (Thirty eight kilograms) i.e. weight of cover 23 Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred millimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 50 | Each | |
| 164 | 127 | Construction of manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/ stone aggregate 40mm(Forty millimetres nominal size) inside plastering 15mm ( Fifteen millimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimetres) 1.00 mtrs(One metre) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten millimetres) internal dimensions. Total weight of cover and frame should be 38 Kgs (Thirty eight kilograms) i.e. weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred millimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 50 | Each | |
| 165 | 128 | Constructing brick masonry chamber for under ground inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5(One cement: Five sand) having C.I. cover with frame(light duty) 455x610mm(Four hundred fifty five into Six hundred ten milimetres)internal dimensions total weight of cover and frame to be not less than 38Kgs (Thirty eight Kilograms) i.e. weight of cover 23 Kgs (twenty three kilograms) i.e. and weight of frame 15 Kgs (Fifteen kilograms), RCC top slab with 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres nominal size), foundation concrete 1:5:10 (One cement: Five sand: Ten graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size), inside plastering 15mm ( Fifteen milimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement on walls and bed concrete etc. complete. Inside dimensions 455mmx610mmx450mm deep (Four hundred fifty five into six hundred ten into four hundred fifty milimeter) complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 24 | Each | |
| 166 | 129 | Providing and laying cement concrete 1:5:10 (one cement into five sand into ten graded stone aggregate 40mm (Forty millimeter) nominal size bedding for 150mm (one hundred fifty milimetre) dia pipe including necessary form work and curing complete including carriage of material with in all leads, lifts and other incidentals, as per specification and as directed by the Engineer-in-Charge. The rete is inclusive of Octori, Royality, Malkana, Toll Tax, Sale Tax, GST and any other takex imported by the Government. | 400 | Per running metre | |
| 167 | 130 | Providing and fixing 20mm (Twenty milimetres) nominal bore peet valve ISI marked or its equivalent without nut and pipe complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 2 | Each | |
| 168 | 131 | Supplying and fixing cast iron manhole cover with frame weight not less than 38 Kgs (Thirty eight kilograms) i.e. weight of cover should be 23 kgs (Twenty Three Kilograms) and weight of frame 15 kgs (Fifteen Kilograms) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 6 | Each | |
| 169 | 132 | Proviiding and fixing 20mm (Twenty millimetres) dia in trenches mild steel tube (Medium quality) tube fitting (Earth work in trenches to be measured and paisd for separately) complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 105 | Per running metre |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
