Jharkhand State Building Construction Corporation Limited has published Construction Of New Academic Building And Renovation Of Existing Academic Building Of Silli College , Silli . . Submission Date for this Tender is 18-11-2019. Building Work Tenders in SILLI Jharkhand. Bidders can get complete Tender details and download the document.
Name of Work: Construction of New Academic Building and Renovation of existing Academic Building of Silli College, Silli. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I. | BI01010001010000000000000515BI0100001114 | 562.28 | cum |
2 | 2 | Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item - B) | BI01010001010000000000000515BI0100001115 | 373.412 | cum |
3 | 3 | Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). | BI01010001010000000000000515BI0100001116 | 337.571 | cum |
4 | 4 | Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume). | BI01010001010000000000000515BI0100001117 | 101.834 | cum |
5 | 5 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001118 | 428.712 | sqm |
6 | 6 | Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening maerials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001119 | 28.199 | cum |
7 | 7 | Providing designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:6) in superstructure with approved quality of clean sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001120 | 89.485 | cum |
8 | 8 | Providing designation 112mm thick reinforced designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carraige of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforced) all complete as per building specification direction of E/I. | BI01010001010000000000000515BI0100001121 | 45.127 | sqm |
9 | 9 | Providing P.C.C. M-75 with nominal mix of (1:4:8) in foundation with approved quality of stone metal grade - III (50mm to 25mm) size clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001122 | 23.586 | cum |
10 | 10 | Providing P.C.C. M-100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade - III (50 mm to 25mm size) clean coarse sand of F.M 2.5 to 3 including screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, skirting, curing, taxes and royalty all complete all complete as per building specification and direction of Engineer-incharge. | BI01010001010000000000000515BI0100001123 | 31.838 | cum |
11 | 11 | Providing R.C.C. M-200 with normal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I | BI01010001010000000000000515BI0100001124 | 127.889 | cum |
12 | 12 | Providing R.C.C. M-200 in band at plinth level with nominal mix of (1:1.5:3) of approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001125 | 23.812 | cum |
13 | 13 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in lintel with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001126 | 1.671 | cum |
14 | 14 | Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001127 | 62.602 | cum |
15 | 15 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in beam of all types with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001128 | 19.467 | cum |
16 | 16 | Providing R.C.C. M-200 with nominal mix of (1:1½:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001129 | 15.904 | cum |
17 | 17 | Providing av. 63mm thick R.C.C. M-200 with nominal mix of (1:1.5:3) Chajja with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, centering, shuttering and mixing cement concrete in mixer and placing in position, vibrating, striking 6mm cement plaster (1:4) in ceiling and sides of chajja with sand of F.M. 1.5 curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001130 | 11.571 | sqm |
18 | 18 | Providing Toe steel reinforcement of 8mm dia to 32mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd., Bokaro and Vizag (RINL)) | BI01010001010000000000000515BI0100001131 | ||
19 | 18.01 | 8 mm to 10 mm dia (TMT coil Fe 500) (Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd., Bokaro and Vizag (RINL)) | BI01010001010000000000000515BI0100001132 | 7.988 | MT |
20 | 18.02 | 12 mm to 32 mm dia (TMT coil Fe 500) (Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd., Bokaro and Vizag (RINL)) | BI01010001010000000000000515BI0100001133 | 17.409 | MT |
21 | 19 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001134 | ||
22 | 19.01 | EXTERNAL WALL | BI01010001010000000000000515BI0100001135 | 993.533 | sqm |
23 | 19.02 | INTERNAL WALL | BI01010001010000000000000515BI0100001136 | 765.557 | sqm |
24 | 20 | Providing 6mm thick cement plaster (1:4) in ceiling with clean of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001137 | 556.966 | sqm |
25 | 21 | Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding curing and taxes all complete as per building specification and direction of E/I. INTERNAL PLASTER | BI01010001010000000000000515BI0100001138 | 1180.98 | sqm |
26 | 22 | Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding curing and taxes all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001139 | ||
27 | 22.01 | EXTERNAL PLASTER | BI01010001010000000000000515BI0100001140 | 447.071 | sqm |
28 | 23 | Providing and laying double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001141 | ||
29 | 23.01 | Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001142 | 1881.28 | sqm |
30 | 24 | Providing and laying double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001143 | ||
31 | 24.01 | Size of Tile 600x600 mm Skirting | BI01010001010000000000000515BI0100001144 | 39.297 | sqm |
32 | 25 | Supplying, fitting and fixing M.S. grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) | BI01010001010000000000000515BI0100001145 | ||
33 | 25.01 | @1.50 Kg Per Sft | BI01010001010000000000000515BI0100001146 | 3083.26 | KG |
34 | 26 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specificatio). | BI01010001010000000000000515BI0100001147 | 177.587 | sqm |
35 | 27 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001148 | 508.256 | sqm |
36 | 28 | Supplying, fitting & fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneeres of standard makew with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001149 | 19.517 | sqm |
37 | 29 | Supplying, fitting & fixing 35mm thick solid core type non-decorative double leaf flush shutter in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneeres of standard makew with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001150 | 6.506 | sqm |
38 | 30 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales, smokes, grease and sand preparing, including cost of scaffolding and taxes all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001151 | 42.286 | sqm |
39 | 31 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001152 | 4271.09 | sqm |
40 | 32 | Dsimantling old plaster and pointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. | BI01010001010000000000000515BI0100001153 | 644.065 | sqm |
41 | 33 | Providing and laying water proofing treatment on roofs of slabs by\napplying cement slurry mixed with water proofing cement compound\nconsisting of applying:\n(a) after surface preparation, first layer of slurry of cement\n@ 0.488 kg/sqm mixed with water proofing cement compound\n@ 0.253 kg/sqm.\n(b) laying second layer of Fibre glass cloth when the first layer is\nstill green. Overlaps of joints of fibre cloth should not be less\nthan 10 cm.\n(c) third layer of 1.5 mm thickness consisting of slurry of cement\n@ 1.289 kg/sqm mixed with water proofing cement compound\n@ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will\nbe allowed to air cure for 4 hours followed by water curing for 48\nhours. The entire treatment will be taken upto 30 cm on parapet\nwall and tucked into groove in parapet all around.\n(d) fourth and final layer of brick tiling with cement mortar (which\nwill be paid for separately.For the purpose of measurement the\n entire treated surface will be measured. | BI01010001010000000000000515BI0100001154 | 929.91 | sqm |
42 | 34 | Covering of treated surface with PCC .- Providing 25 mm thick Cement Alf, Concrete M20 1:1. :3) maintaining slope in alternate 2 mt x 2 mt panels\nwith aaproved of stone chips of 20 mm to 6 mm size graded and cleaned sand 2.5 to 3 including screening,shuttering,and mixing cement concret . fixer with admixture of integral water proofing and\nplacing in posi . ing curing,taxes and royality all complete as per building specifi nd direction of Ell. Panels that has been left shoul be casted next dysThere should be 6 mm gap between Panels .Brand Sika _Plastocrate Aus,MYK proof WP10, Fosroc- Conplast X421 lc& Dr Fixit Pidiproof LW+ \n | BI01010001010000000000000515BI0100001155 | 929.91 | sqm |
43 | 35 | Providing and filling of 6 mm thick Groove between 25 mm PCC Panels with Polysulphide Sealant (Poring Grade)as Per drawings and technical specifications and direction of E in Charge (with 18% GST Polysulphicle Fosroc-Thoflex 600.Dr Fixit Pidiseal PS(42P) !MraYndK -Seikaal PS or Euivalent | BI01010001010000000000000515BI0100001156 | 929.91 | M |
44 | 36 | Labour for scrapping old paint with paint remover and below lamp as required on wooden or steel surface including cost of all labour and materials and scaffolding all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001157 | 195.121 | sqm |
45 | 37 | Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20 x 6mm M.S. falts or 16mm M.S. square bars fitted on 25 x 25 x 6mm M.S. Angle frame of size 60 x 60 x 6mm including cost of fabrication, providing necessary locking arrangement with haskal and dommy duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. | BI01010001010000000000000515BI0100001158 | 341.543 | KG |
46 | 38 | Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales, smokes, grease and sand preparing, including cost of scaffolding and taxes all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001159 | 191.264 | sqm |
47 | 39 | Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. | BI01010001010000000000000515BI0100001160 | 1538.43 | sqm |
48 | 40 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. | BI01010001010000000000000515BI0100001161 | 1.672 | cum |
49 | 41 | Taking down C.A. of G.C.I. sheet in roofs with ridges including stacking the serviceable materials within 15M lead and disposal of unserviceable materials with all leads as per direction of E/I. | BI01010001010000000000000515BI0100001162 | 20.385 | sqm |
50 | 42 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001163 | 0.123 | cum |
51 | 43 | Taking down chaukhats in doors including stacking serviceable materials with all leads all complete as per direction of E/I. | BI01010001010000000000000515BI0100001164 | 3 | Each |
52 | 44 | Providing P.C.C. M-15 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and mixing cement sand of F.M 2.5 to 3 including screening, shuttering, vibrating, skirting, curing, taxes and royalty all complete all complete as per specification and direction of Engineer-incharge. | BI01010001010000000000000515BI0100001165 | 1.497 | cum |
53 | 45 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001166 | 64.005 | sqm |
54 | 46 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001167 | 64.005 | sqm |
55 | 47 | Providing Precast R.C.C. M-200 with nominal mix of (1:1.5:3) slab of desired size with approved quality of stone chips and clean coarse sand of F.M. 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. | BI01010001010000000000000515BI0100001168 | 1.707 | cum |
56 | 48 | Labour for laying, fitting and fixing NP2 R.C.C. spu pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak, proof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complete as per specification and direction of E/I.\n150mm dia RCC spun pipe - Upto 3.0 metre depth of invert below G.L. | BI01010001010000000000000515BI0100001169 | 30 | M |
57 | 49 | Supplying of 150 mm dia NP2 hume pipe ………….do…………….do of E/I. | BI01010001010000000000000515BI0100001170 | 30 | M |
58 | 50 | HYDT: Cost of Drilling 200 mm x 165 mm x 125 meter deep bore well in all kinds of soil and rock in Rural) area for Installation of pump set with Hydraulic DTH Ring machine, all complete including supplying all materials, tools, drilling, rig, Air Compressor and Equipments, as well as fuel, lubricants and cost of Transportation of Rig Machine and other Vehicle up to site. (i)From 0.0M to 50.0 M | BI01010001010000000000000515BI0100001171 | ||
59 | 50.01 | (i)From 0.0M to 50.0 M | BI01010001010000000000000515BI0100001172 | 30 | M |
60 | 51 | Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600x450mm Internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1.6) with 600x475mm G.I. Cover with frame (weight not less than 36kg.) alongwith earth work in excavation and 80 mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/l.\n | BI01010001010000000000000515BI0100001173 | 5 | Each |
61 | 52 | Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408) | BI01010001010000000000000515BI0100001174 | ||
62 | 52.01 | Using Concrete Mixer | BI01010001010000000000000515BI0100001175 | 188 | M |
63 | 53 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge\n100 mm nominal size dia | BI01010001010000000000000515BI0100001176 | 30 | M |
64 | 54 | Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for allleads & lifts, all complete as per direction of Engineer-in-charge | BI01010001010000000000000515BI0100001177 | 4.239 | cum |
65 | 55 | Supplying, filling, spreading & leveling gravels of size range 5 mm to10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge | BI01010001010000000000000515BI0100001178 | 4.239 | cum |
66 | 56 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mmto 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge | BI01010001010000000000000515BI0100001179 | 6.359 | cum |
67 | 57 | Providing and laying 60mm thick factory made cement concrete interlockingpaver block of M -30 grade made by block making machine with strongvibratory compaction, of approved size, design & shape, laid in requiredcolour and pattern over and including 50mm thick compacted bed of coarsesand, filling the joints with fine sand etc. all complete as perthe direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001180 | 693 | sqm |
68 | 58 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey\ncomb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long\ncomplete as per standard design.\nWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001181 | 1 | Each |
69 | 59 | Providing and fixing PVC rigid foam sheet 1 mm thick on existing door\nshutters (bathroom and W.C. doors) using synthetic rubber based\nadhesive | BI01010001010000000000000515BI0100001182 | 9.758 | sqm |
70 | 60 | Providing and laying water proofing treatment in sunken portion of\nWCs, bathroom etc., by applying cement slurry mixed with water\nproofing cement compound consisting of applying :\n(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with\nwater proofing cement compound @ 0.253 kg/ sqm. This layer\nwill be allowed to air cure for 4 hours.\n(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with\nwater proofing cement compound @ 0.126 kg/sqm. This layer\nwill be allowed to air cure for 4 hours followed with water curing\nfor 48 hours.\n(The rate includes preparation of surface, treatment and sealing of\nall joints, corners, junctions of pipes and masonry with polymer mixed\nslurry.) | BI01010001010000000000000515BI0100001183 | 14.026 | sqm |
71 | 61 | Dismantling tile work in floors and roofs laid in cement mortar including\nstacking material within 50 metres lead | BI01010001010000000000000515BI0100001184 | 79.941 | sqm |
72 | 62 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : | BI01010001010000000000000515BI0100001185 | ||
73 | 62.01 | 25 mm thick. | BI01010001010000000000000515BI0100001186 | 30.078 | sqm |
74 | 63 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | BI01010001010000000000000515BI0100001187 | 20.922 | sqm |
75 | 64 | Finishing walls with Premium Acrylic Smooth exterior paint with\nSilicone additives of required shade | BI01010001010000000000000515BI0100001188 | ||
76 | 64.01 | New work (Two or more coats applied @ 1.43 ltr/10 sqm\nover and including priming coat of exterior primer applied\n@ 2.20 kg/10 sqm) | BI01010001010000000000000515BI0100001189 | 1902.99 | sqm |
77 | 65 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Internal | BI01010001010000000000000515BI0100001190 | 5057.28 | sqm |
78 | 66 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. External | BI01010001010000000000000515BI0100001191 | 1902.99 | sqm |
79 | 67 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | BI01010001010000000000000515BI0100001192 | 5996.08 | sqm |
80 | 68 | Providing and fixing 18 mm thick gang saw cut, mirror polished,\npremoulded and prepolished, machine cut for kitchen platforms, vanity\ncounters, window sills, facias and similar locations of required size,\napproved shade, colour and texture laid over 20 mm thick base cement\nmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,\nmixed with matching pigment, epoxy touch ups, including rubbing, curing,\nmoulding and polishing to edges to give high gloss finish etc. complete\nat all levels | BI01010001010000000000000515BI0100001193 | ||
81 | 68.01 | Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble | BI01010001010000000000000515BI0100001194 | 17.106 | sqm |
82 | 69 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming\nto IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :\n4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001195 | 19.3 | sqm |
83 | 70 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to\nIS: 15622 (thickness to be specified by the manufacturer), of approved\nmake, in all colours, shades except burgundy, bottle green, black of\nany size as approved by Engineer-in-Charge, in skirting, risers of steps\nand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3\ncoarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,\nincluding pointing in white cement mixed with pigment of matching shade\ncomplete. | BI01010001010000000000000515BI0100001196 | 88.034 | sqm |
84 | 71 | Providing and fixing pressed steel door frames conforming to IS: 4351,\nmanufactured from commercial mild steel sheet of 1.60 mm thickness,\nincluding hinges, jamb, lock jamb, bead and if required angle threshold\nof mild steel angle of section 50x25 mm, or base ties of 1.60 mm,\npressed mild steel welded or rigidly fixed together by mechanical means,\nincluding M.S. pressed butt hinges 2.5 mm thick with mortar guards,\nlock strike-plate and shock absorbers as specified and applying a coat\nof approved steel primer after pre-treatment of the surface as directed\nby Engineer-in-charge | BI01010001010000000000000515BI0100001197 | ||
85 | 71.01 | Fixing with adjustable lugs with split end tail to\neach jamb | BI01010001010000000000000515BI0100001198 | 56.098 | M |
86 | 72 | Providing and fixing aluminium work for doors, windows, ventilators\nand partitions with extruded built up standard tubular sections/\nappropriate Z sections and other sections of approved make\nconforming to IS: 733 and IS: 1285, fixing with dash fasteners of\nrequired dia and size, including necessary filling up the gaps at\njunctions, i.e. at top, bottom and sides with required EPDM rubber/\nneoprene gasket etc. Aluminium sections shall be smooth, rust free,\nstraight, mitred and jointed mechanically wherever required including\ncleat angle, Aluminium snap beading for glazing / paneling, C.P.\nbrass / stainless steel screws, all complete as per architectural\ndrawings and the directions of Engineer-in-charge. (Glazing, paneling\nand dash fasteners to be paid for separately | BI01010001010000000000000515BI0100001199 | ||
87 | 72.01 | Powder coated aluminium (minimum\nthickness of powder coating 50 micron | BI01010001010000000000000515BI0100001200 | 152.45 | KG |
88 | 73 | For shutters of doors, windows & ventilators including\nproviding and fixing hinges/ pivots and making provision\nfor fixing of fittings wherever required including the cost\nof EPDM rubber / neoprene gasket required (Fittings\nshall be paid for separately) | BI01010001010000000000000515BI0100001201 | 60 | KG |
89 | 74 | Providing and fixing glazing in aluminium door, window, ventilator shutters\nand partitions etc. with EPDM rubber / neoprene gasket etc. complete as\nper the architectural drawings and the directions of engineer-in-charge .\n(Cost of aluminium snap beading shall be paid in basic item): | BI01010001010000000000000515BI0100001202 | 48.138 | sqm |
90 | 75 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes | BI01010001010000000000000515BI0100001203 | ||
91 | 75.01 | 110 mm Rain water pipe | BI01010001010000000000000515BI0100001204 | 110.366 | M |
92 | 76 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. | BI01010001010000000000000515BI0100001205 | ||
93 | 76.01 | Coupler - 110mm | BI01010001010000000000000515BI0100001206 | 40 | Each |
94 | 76.02 | Bend - 110mm | BI01010001010000000000000515BI0100001207 | 40 | Each |
95 | 76.03 | Shoe - 110 | BI01010001010000000000000515BI0100001208 | 40 | Each |
96 | 77 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete | BI01010001010000000000000515BI0100001209 | ||
97 | 77.01 | 110 mm | BI01010001010000000000000515BI0100001210 | 80 | Each |
98 | 78 | Carriage of materials | BI01010001010000000000000515BI0100001211 | ||
99 | 78.01 | Fly ash = 8 km | BI01010001010000000000000515BI0100001212 | 40513.9 | Thou |
100 | 78.02 | Bricks Lead = 8 km | BI01010001010000000000000515BI0100001213 | 25280.3 | Thou |
101 | 78.03 | Sand lead = 10 km | BI01010001010000000000000515BI0100001214 | 235.136 | cum |
102 | 78.04 | Stone chips lead = 22 km | BI01010001010000000000000515BI0100001215 | 220.273 | cum |
103 | 78.05 | Stone metal lead = 20 km | BI01010001010000000000000515BI0100001216 | 52.099 | cum |
104 | 78.06 | Local Sand lead = 3km | BI01010001010000000000000515BI0100001217 | 101.51 | cum |
105 | 78.07 | ELECTRICAL | BI01010001010000000000000515BI0100001218 | ||
106 | 79 | Point wiring in PVC conduit, with modular type switch - \nPoint wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box etc. as required. | BI01010001010000000000000515BI0100001219 | ||
107 | 79.01 | Group - B | BI01010001010000000000000515BI0100001220 | 225 | Point |
108 | 80 | Wiring for twin control light point with 1.5 sq.mm FRPVC insulated copper conductor single/core cable in surface/recessed PVC conduit 2 way modular type switch phenolic laminated sheet cover suitable size M.S. box and earthing the paint with 1.5 sq.mm FRPVC | BI01010001010000000000000515BI0100001221 | 2 | Point |
109 | 81 | Wiring for light/power plug with 2 x 4 sq.mm FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 No. 4 sq.mm FRPVC insulated copper conductor single core cable for loop earthing as required | BI01010001010000000000000515BI0100001222 | 120 | M |
110 | 82 | Wiring for Curcuit submain wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC sonduit as required | BI01010001010000000000000515BI0100001223 | ||
111 | 82.01 | 2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. earth wire | BI01010001010000000000000515BI0100001224 | 680 | M |
112 | 82.02 | 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire | BI01010001010000000000000515BI0100001225 | 310 | M |
113 | 83 | S/F PVC conduit - \nSupplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case recessed conduit as required. | BI01010001010000000000000515BI0100001226 | ||
114 | 83.01 | 20mm | BI01010001010000000000000515BI0100001227 | 30 | M |
115 | 84 | S/F PVC /G.I. boxes - \nSupplying and fixing PVC/G.I. box of following sizes on surface or in recess with suitable size of phenolic laminated sheet cover infront including painting etc. as required. | BI01010001010000000000000515BI0100001228 | ||
116 | 84.01 | 75mm x 75mm x 50mm deep/(4" x 4") | BI01010001010000000000000515BI0100001229 | 32 | Each |
117 | 85 | S/F Modular type switch/socket on the existing switch box including connection etc. as required | BI01010001010000000000000515BI0100001230 | ||
118 | 85.01 | 5/6 amp. Switch & 3 pin 5/6 amp. Socket/outlet | BI01010001010000000000000515BI0100001231 | 30 | Each |
119 | 85.02 | 3 pin 5/6 amp. Socket/outlet | BI01010001010000000000000515BI0100001232 | 20 | Each |
120 | 86 | S/F Modular type electronic fan regulator -\nSupplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | BI01010001010000000000000515BI0100001233 | 66 | Each |
121 | 87 | S/F suitable size G.I. box with modular plate and cover in front on surface or in recess including P.F. 3 pin 5/6 amp. Modular socket outlet and 5/6 amp. Modular switch connection painting etc. as required | BI01010001010000000000000515BI0100001234 | 20 | Each |
122 | 88 | S/F suitable size G.I. box with modular plate and cover in front on surface/recess including P/F 6 pin 15/16 amp. And 5/6 amp modular socket outlet and 15/16 amps. Modular switch connection as painting etc. as required | BI01010001010000000000000515BI0100001235 | 20 | Each |
123 | 89 | S/F 3 pin 5 amp ceiling rose on the existing junction box wooden block including connection etc. as required | BI01010001010000000000000515BI0100001236 | 143 | Each |
124 | 90 | S/F brass vatton/Angle Holder including connection etc. as required | BI01010001010000000000000515BI0100001237 | 82 | Each |
125 | 91 | ITC fluorescent fitting directly on surface - \nInstalltion, testing and commissioning of Pre-wired, fluorescent fitting/compact fluorescent fitting of all type, complete with all accessories and tube etc. directly on ceiling/wall, including connection with 1.5 sq.mm. FR PVC insulated, copper conduit. | BI01010001010000000000000515BI0100001238 | 73 | Each |
126 | 92 | I.T.C of ceiling fan including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq.mm FRPVC with 1.5 sq.mm. FRPVC insulated copper conductor single core cable etc. as required | BI01010001010000000000000515BI0100001239 | 66 | Each |
127 | 93 | I.T.C of exhaust fan up to 450mm sweep in the existing opening including making the hole to suit the size of the above fan making good the damage connection testing commissioning etc. as required | BI01010001010000000000000515BI0100001240 | 4 | Each |
128 | 94 | S/F T.P. MCB DB - \nSupplying and fixing following way, three pole and netural, sheet MCB ditribution board, 415 volts, on surface/recess, complete with tinned copper busbar, netural busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) | BI01010001010000000000000515BI0100001241 | ||
129 | 94.01 | 4 way (4 + 12), Double door, Horizontal type | BI01010001010000000000000515BI0100001242 | 2 | Each |
130 | 94.02 | 6 way (4 + 18), Double door, Horizontal type | BI01010001010000000000000515BI0100001243 | 2 | Each |
131 | 95 | S/F 5 amp. To 32 amp rating 240 volt "B" series miniature circuit breaker suitable for inductive load of following pole in the existing MCB DB complete with connection testing and commissioning etc. as required.\n6/32 amps, single pole, "B" series | BI01010001010000000000000515BI0100001244 | 2 | Each |
132 | 96 | S/F 'C' series, MCB - \nSupplying and fixing following 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connection, testing and commossioning etc. as required. | BI01010001010000000000000515BI0100001245 | ||
133 | 96.01 | 40 amps, TPN | BI01010001010000000000000515BI0100001246 | 2 | Each |
134 | 96.02 | 50/63 amps, TPN | BI01010001010000000000000515BI0100001247 | 2 | Each |
135 | 97 | S/F following rating single pole 240 volts isolator in the existing MCB DB complete with connection testing and commissioning etc. a srequired | BI01010001010000000000000515BI0100001248 | ||
136 | 97.01 | 40 amp | BI01010001010000000000000515BI0100001249 | 2 | Each |
137 | 97.02 | 63 amp | BI01010001010000000000000515BI0100001250 | 2 | Each |
138 | 98 | Earthing with G.I. earth pipe 4.5 mtr. Long, 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. | BI01010001010000000000000515BI0100001251 | 1 | Set |
139 | 99 | Copper earth plate elecrtode - \nEarthing with copper earth plate 600mmx 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required (But without charcoal or coke and salt) | BI01010001010000000000000515BI0100001252 | 1 | Set |
140 | 100 | Salt/Charcoal for plate earth electrode - \nExtra for using salt and charcoal for G.I. or copper plate earth electrode as required. | BI01010001010000000000000515BI0100001253 | 1 | Set |
141 | 101 | S/L 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode including soldering etc. as required | BI01010001010000000000000515BI0100001254 | 30 | M |
142 | 102 | P/F lighting conductor final made of 25mm dia 30omm long copper tube having single pole at top with 85mm dia 3mm thick copper base plate including holes etc. complete as required | BI01010001010000000000000515BI0100001255 | 1 | Each |
143 | 103 | Reverting sweating and soldering of copper/G.I. tape (with another copper G.I. tape base of the final or any other metalic object) as required | BI01010001010000000000000515BI0100001256 | 1 | Each |
144 | 104 | P/F copper lightning conductor tape in horizontal run - \nProviding and fixing copper tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) | BI01010001010000000000000515BI0100001257 | 30 | M |
145 | 105 | P/F copper lighning conductor tape in vertical run - \nProviding and fixing copper tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run) | BI01010001010000000000000515BI0100001258 | 30 | M |
146 | 106 | P/F testing joint made of 20 x 3mm thick copper strip 125mm long with 4 nos. of tinned brass bolts nuts check nuts and spring washers etc. complete as required | BI01010001010000000000000515BI0100001259 | 1 | Each |
147 | 107 | Supply of Ceiling Fan: Supplying and fitting of 1400 mm Sweep regular/ standared model AC ceiling fan , including connection with 1.5 sq mm copper wire, down rod of standared length(upto 30cm) withall accessories as required. Make :- Polar/Bajaj/Crompton / Havells / GEC. | BI01010001010000000000000515BI0100001260 | 66 | Each |
148 | 108 | Supply of Exhaust metal Fan: Supply and fitting of 300 mm, 230V AC metal exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc as required( Make- Polar/ Havells/Crompton) | BI01010001010000000000000515BI0100001261 | 4 | Each |
149 | 109 | Supply 15/16W LED BULB | BI01010001010000000000000515BI0100001262 | 82 | Each |
150 | 110 | 1X28 watt T5 Tube light fitting | BI01010001010000000000000515BI0100001263 | 73 | Each |
151 | 110.01 | SANITATION | BI01010001010000000000000515BI0100001264 | ||
152 | 111 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'P' trap 15 liters C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware ware footrest to be fixed than 50 gms, 15mm PVC connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001265 | ||
153 | 111.01 | With 12.5 lit. low level PVC cistern | BI01010001010000000000000515BI0100001266 | 3 | Each |
154 | 112 | Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘p’ trap of parry hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001267 | ||
155 | 112.01 | (i) E.W.C. with 'P' trap | BI01010001010000000000000515BI0100001268 | ||
156 | 112.02 | (b) 12.5 lit. low level PVC Cistem | BI01010001010000000000000515BI0100001269 | 1 | Each |
157 | 113 | Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthen ware urinal of Hindustan 'Parry' or any other approved I.S.S. make with 5 litres capacity C.i. automatic flusing cistern of reliance for any other I.S.S. approved make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grams, 15mm PVC/Alkthene pipe 450mm longwith brass coupling at both ends and doing plumber joints including priming coat of red oxide, cutting wall and floor making good the same etc. all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001270 | ||
158 | 113.01 | Flat back or standard corner (600mm x 350mm) | BI01010001010000000000000515BI0100001271 | 3 | Each |
159 | 114 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001272 | 4 | Each |
160 | 115 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall | BI01010001010000000000000515BI0100001273 | ||
161 | 115.01 | 25 mm nominal outer dia .Pipes. | BI01010001010000000000000515BI0100001274 | 15 | M |
162 | 115.02 | 32 mm nominal outer dia. Pipes. | BI01010001010000000000000515BI0100001275 | 25 | M |
163 | 115.03 | 40 mm nominal outer dia. Pipes. | BI01010001010000000000000515BI0100001276 | 20 | M |
164 | 116 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. | BI01010001010000000000000515BI0100001277 | ||
165 | 116.01 | 15 mm nominal outer dia .Pipes. | BI01010001010000000000000515BI0100001278 | 30 | M |
166 | 116.02 | 20 mm nominal outer dia .Pipes. | BI01010001010000000000000515BI0100001279 | 40 | M |
167 | 116.03 | 25 mm nominal outer dia .Pipes. | BI01010001010000000000000515BI0100001280 | 35 | M |
168 | 116.04 | 32 mm nominal outer dia .Pipes. | BI01010001010000000000000515BI0100001281 | 40 | M |
169 | 117 | Providing and fixing Gun metal full way valve of approved quality, all complete, as per specification and direction of E/I. | BI01010001010000000000000515BI0100001282 | ||
170 | 117.01 | (d) 32mm dia and weight not less than 700gms. | BI01010001010000000000000515BI0100001283 | 3 | Each |
171 | 117.02 | (e) 40mm dia and weight not less than 1.0 Kg.. | BI01010001010000000000000515BI0100001284 | 2 | Each |
172 | 117.03 | (f) 50mm dia and weight not less than 1.5 Kg. | BI01010001010000000000000515BI0100001285 | 2 | Each |
173 | 118 | Providing and fixing Male ended 15mm dia brass bib cock of approved quality (Wt. Not less than 350 gms) with extra socket all complete as per specification and direction of E/I. : | BI01010001010000000000000515BI0100001286 | 5 | Each |
174 | 119 | Providing and fixing brass/C.I stop cock of approved quality all complete as per specification and direction of E/I. | BI01010001010000000000000515BI0100001287 | ||
175 | 119.01 | 15mm nominal bore | BI01010001010000000000000515BI0100001288 | 7 | Each |
176 | 120 | Providing and fixing 15mm size C.P. brass pillar cock (Weight not less than 350gms). C.I. body brass spindle pillar cock of approved quality as per specification and direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001289 | ||
177 | 120.01 | (b) C.I. body brass spindle | BI01010001010000000000000515BI0100001290 | 6 | Each |
178 | 121 | Polythene water storage tank of ISI mark (eg sintex /sinter/himgiri/gangotri ) with cover & locking system | BI01010001010000000000000515BI0100001291 | 2000 | LIT |
179 | 122 | Providing and fixing PTMT grating of approved quality and colour. | BI01010001010000000000000515BI0100001292 | ||
180 | 122.01 | Circular type\n | BI01010001010000000000000515BI0100001293 | ||
181 | 122.02 | 100 mm nominal dia | BI01010001010000000000000515BI0100001294 | 5 | Each |
182 | 122.03 | 125 mm nominal dia with 25 mm waste hole | BI01010001010000000000000515BI0100001295 | 7 | Each |
183 | 122.04 | Drainage | BI01010001010000000000000515BI0100001296 | ||
184 | 123 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. | BI01010001010000000000000515BI0100001297 | ||
185 | 123.01 | 110 mm diameter | BI01010001010000000000000515BI0100001298 | 40 | M |
186 | 124 | Add 12 % GST (in Basic Rate must fill 12) | BI01010001010000000000000515BI0100001299 | 1 | Percentage |
187 | 125 | Add 1% Labour Cess (in Basic Rate must fill 1) | BI01010001010000000000000515BI0100001300 | 1 | Percentage |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail