| 1 | 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. (15.7.4) | BI01010001010000000000000515BI0100001113 | 1.547 | cum |
|---|
| 2 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). (4.1.2) | BI01010001010000000000000515BI0100001114 | 1.75 | cum |
|---|
| 3 | 3 | Centering and shuttering including strutting, propping etc. and removal of form for all heights: Columns, Pillars, Piers, Abutments, Posts and Struts. (5.9.6) | BI01010001010000000000000515BI0100001115 | 14 | sqm |
|---|
| 4 | 4 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand). (13.1.1) | BI01010001010000000000000515BI0100001116 | 6.748 | sqm |
|---|
| 5 | 5 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( + 0.05 %), total coated thickness with zinc coating 120 gm per sqm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (12.50) | BI01010001010000000000000515BI0100001117 | 240.915 | sqm |
|---|
| 6 | 6 | Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (50.10.1) | BI01010001010000000000000515BI0100001118 | 4523.52 | kg |
|---|
| 7 | 7 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 gm per sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm). (12.51.1) | BI01010001010000000000000515BI0100001119 | 47.5 | m |
|---|
| 8 | 8 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction ofEngineer-in-charge. Made of G.I. wire of dia 4 mm. (16.70.1) | BI01010001010000000000000515BI0100001120 | 19.845 | sqm |
|---|
| 9 | 9 | Providing and fixing bolts including nuts and washers complete. (10.20) | BI01010001010000000000000515BI0100001121 | 5.525 | Kg |
|---|
