Replacement Of Damaged Drums , Idlers Etc . Of Various Conveyors In Np / Offsite Area , Fact-Cd . , AMBALAMEDU-Kerala

Replacement Of Damaged Drums , Idlers Etc . Of Various Conveyors In Np / Offsite Area , Fact-Cd . , Replacement Of Damaged Drums , Idlers Etc . Of Various Conveyors In Np / Offsite Area , Fact-Cd . , Replacement Of Drive Drums , Tripper Drums Tail Drums , Bend Pulleys , Snub Pulleys Etc . Of Bagging Plant / Product Conveyors . Work Involves: The Belt Shall Be Arrested Properly With Belt Clamps , After Lifting The Gravity Weight . The Damaged Drum With Plummer Block And Bearings Shall Be Dismantled And Taken To Offsite Mechanical . Spare Drum Shall Be Transported To Work Site From Off Site / Stores / Workshop And Positioned At The Required Place . New Bearings And Plummer Block At Both Side Shall Be Fixed Properly With Lubricant . The Drum Shall Be Aligned / Fixed To The Connecting Part , As Per Instruction Of The Engineer-In -Charge . If Required , Zero Speed Sensor Shall Be Provided For Tail End Drum . Release Belt Clamps , Provide Required Gravity Weight And Service The Conveyor On Load , With Out Any Sway . , Replacement Of Troughing Idlers In Bagging Plant / Product Conveyors . Work Involves: The Required Troughing Idlers Shall Be Transported From Plant Area / Stores To Site . The Damaged Troughing Idlers Of Conveyors In Np Offsite / Bagging Plant Area Shall Be Replaced , As Per The Instructions Of Engineer - In -Charge . Damaged Troughing Idlers Shall Be Transported To Off Site / Scrap Yard . , Replacement Of Return Idlers / Clamps Of Bagging Plant / Product Conveyors . Work Involves: The Required Return Idlers / Clamps Shall Be Transported From Plant Area / Stores To Site . The Damaged Return Idlers / Clamps Of Conveyors In Np Offsite / Bagging Plant Area Shall Be Replaced , As Per The Instructions Of Engineer - In -Charge . Damaged Return Idlers / Clamps Shall Be Transported To Off Site / Scrap Yard . , Servicing Of Damaged Return Idlers Of 750Mm Wide Bagging Plant / Product Conveyors . Work Involves : Re Usable Rubber Disc Shall Be Removed From The Damaged Return Idlers . Return Idlers Shall Be Serviced / Repaired By Replacing The Rubber Discs / Bearings As Per The Instructions Of The Engineer-In -Charge . The Serviced Return Idlers Shall Be Kept Properly At Off Site Area As Spare . , Replacement / Servicing Bearings Of Various Conveyor Drums . Work Involves: The Belt Shall Be Arrested Properly With Belt Clamps , After Lifting The Gravity Weight . The Bearings / Plummer Blocks At Both Side Of Drum Shall Be Replaced With New / Serviced One . Bearings Shall Be Lubricated Properly With Grease . The Drum Shall Be Aligned / Fixed To The Connecting Part , As Per Instruction Of The Engineer-In -Charge . Release Belt Clamps , Provide Required Gravity Weight And Service The Conveyor On Load , With Out Any Sway . [One Set Means , 02 Bearings] .

Refer document

INR 12000.0 /-

Refer document