Indo Tibetan Border Police Force-ITBP has published Construction Of Platoon Office With Ops Room , Gos Living Accommodation , Sos Living Accommodation , Ration , Clothing And Misc Store , Kote , Ammunition Store , Wt Station Store And Mi Room Toilet Block At Kota Dogri Post Of 19Th Bn Itbp , Bonda . Submission Date for this Tender is 30-10-2019. Building Work Tenders in COMMANDANT 19TH BN ITBP, BONDA, SARAHAN HP Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: Construction of GO's living accommodation,SO's Living Accommodation,PL office with OPS Room,Ration,Clothing & Misc store, Kote ,Arms, & Ammunition Store, WT station,Store ,MI Room & 03Nos Toilet And 03Nos Bathroom at Kota Dogri Post of 19th Bn ITBP. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | KOTA | |||
| 2 | 2 | Earth work in exevation over areas (excluding 30 cm in depth 1.5 m in width as well as 10 sqm on plan ) including disposal of excavated earth, lead upto 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dresse Ordinary rock | 63.14 | Cum | |
| 3 | 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kinds of soil | 4.06 | Cum | |
| 4 | 4 | Earth work in excavation by mechanical means( hydraulic excavator)/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed All kinds of soilas directed, within a lead of 50m. Ordinary rock | 495.56 | Cum | |
| 5 | 5 | P/L cement concrete - all works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cement Should be used ACC/Ambuja/J.K 43 grade | 1.62 | Cum | |
| 6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:5:10 (1 Cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)Cement should be used of ACC/Ambuja/ L&T/ Birla make | 62.94 | Cum | |
| 7 | 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). | 166.5 | Cum | |
| 8 | 8 | Providing and fixing upto floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). Cement should be used of ACC/Ambuja/ L&T/ Birla make | 208.3 | Cum | |
| 9 | 9 | Centring and shuttering including strutting, propping etc. and removal of form for:removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers. | 486.1 | Sqm | |
| 10 | 10 | Centring and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases of columns, etc. for mass concrete | 110.4 | Sqm | |
| 11 | 11 | Centring and shuttering including strutting, propping etc. and removal of form for:removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts | 361.44 | Sqm | |
| 12 | 12 | Centring and shuttering including strutting, propping etc. and removal of form for:removal of form for: slab tank\ | 4.62 | Sqm | |
| 13 | 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars. | 29028.4 | Kg | |
| 14 | 14 | Providing and fixing 1mm thik M.S. Sheet door with frame of 40x40x6mm angle iron and 3mm M.S gusset plates at the junction and corners, all necessary fitting complete , including applying coat of approved steel primer.Using M.S. angles 40x40x6mm for diagonal braces. | 11.62 | Sqm | |
| 15 | 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Hollock wood/1st class local wood | 3.23 | Cum | |
| 16 | 16 | Providing wood work in frames of false ceiling, partition etc. sawn and put up in position. Hollock wood/1st class local wood | 5.13 | Cum | |
| 17 | 17 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws (screw should be stainless steel and brand Magnum/ nettle fold/Amul)excluding, panelling which will be paid for separately(thickness of shutter should be 35mm). Kiln seasoned and chemically treated hollock wood. | 55.4 | Sqm | |
| 18 | 18 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Kiln seasoned and chemically treated hollock wood | 35.48 | Sqm | |
| 19 | 19 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35 mm thick | 48.36 | Sqm | |
| 20 | 20 | Providing and fixing 20mm thick ceiling tongued and grooved on and including wooden plugs complete with necessary screws and priming coat on unexposed surface with :Hollock/ Ist class Local wood. | 435 | Sqm | |
| 21 | 21 | 25 mm wooden planking in eve Board including fixing with iron screws complete with. Hollock / Ist class Local wood. | 64.6 | Sqm | |
| 22 | 22 | Providing and fixing 25 mm thick shutters for cupboards etc. including ISI marked black enamelled M.S. butt hinges with necessary screws Hollock wood/1st class local wood panelled , panelled &Glazed shutters. | 15.2 | Sqm | |
| 23 | 23 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16mm | 32 | Nos | |
| 24 | 24 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x10mm | 20 | Nos | |
| 25 | 25 | Providing and fixing ISI marked aluminium tower bolts ISI marked anodised (anodic coating not less then grade AC 10 as per IS : 1868 ) transparent or dyed to required coulor or shad with nuts and screws etc. complete: 150x10 mm | 124 | Nos | |
| 26 | 26 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125 mm | 216 | Nos | |
| 27 | 27 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 100 mm | 88 | Nos | |
| 28 | 28 | Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 200x10 mm | 168 | Nos | |
| 29 | 29 | Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. | 96 | Nos | |
| 30 | 30 | Providing and fixing oxidised M.S. hasp and staple (Safety type) conforming to IS : 363 with necessary screws etc. complete 115 mm: | 8 | Nos | |
| 31 | 31 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate | 626.7 | Sqm | |
| 32 | 32 | Providing and fixing glass strips in joints of terrazo / cement concrete floors.40 mm wide and 4 mm thick. | 176.88 | M | |
| 33 | 33 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc.complete Hot finished welded type tubes. | 15889.4 | Kg | |
| 34 | 34 | Structural steel work in single section fixed without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 439.26 | Kg | |
| 35 | 35 | Extra for providing and fixing wind ties of 40x 6mm flat iron section 40x6mm flats | 31.62 | m | |
| 36 | 36 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) | 192 | Nos | |
| 37 | 37 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 909.07 | Sqm | |
| 38 | 38 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | 173.57 | M | |
| 39 | 39 | Providing and fixing plain multipurpose cement board (High Pressure steam cured) as per IS: 14862 : 2000) with suitable fibre cement screw in ceiling etc. complete (frame work to be paid seprately) 6mm thick cement board | 168.24 | Sqm | |
| 40 | 40 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 ( thickness to be specified by the manufacture) of approved make in all colours, shade except burgundy, bottle green, black of any size as approved by engineer in charge in skirting, riser of steps and dados over 12mm thick bed of cement mortar 1:3 ( 1cement:3 course sand ) and jointing with grey cement slurry @ 3.3 kg/ sqm including pointing in white cement mixed with pigments of matching shade complete. | 100 | Sqm | |
| 41 | 41 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) | 1966.08 | Sqm | |
| 42 | 42 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water tinnable priming coat with cement primer. | 1376.26 | Sqm | |
| 43 | 43 | Finishing walls with water proofing cement paint of required shade : \nNew work (Two or more coats applied @ 3.84 kg/10 sqm) | 589.82 | Sqm | |
| 44 | 44 | Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) | 884.12 | Sqm | |
| 45 | 45 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. | 884.12 | Sqm | |
| 46 | 46 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. | 103.24 | Sqm | |
| 47 | 47 | Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, rryware/Hindware /Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.White Vitreous china Orissa pattern W.C. pan.of size 580x440mm with integral type foot rests | 11 | Nos | |
| 48 | 48 | Providing and fixing wash basin with C.I./M.S. brackets, 15 mm C.P. brass pillar taps, Kingston/Gem/Techno/Parko, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :A] White Vitreous china Wash basin size 630x450 mm with 15 mm C.P.brass pillar taps | 11 | Nos | |
| 49 | 49 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required.White vitreous china laboratory kitchen sink 610X510X200 mm | 2 | Nos | |
| 50 | 50 | 17.31 P/F 600x450mm beveled edge mirror of superior glass ( of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 3 | Nos | |
| 51 | 51 | Providing and fixing soil, waste and vent pipes : 100 mm dia. Sand cast iron S&S pipe | 118 | M | |
| 52 | 52 | Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement :2 fine sand) in S.C.I./ C.I. pipes | 30 | Nos | |
| 53 | 53 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. Sand cast iron S&S as per IS 1729 | 8 | Nos | |
| 54 | 54 | 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 17.73.1 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weight not less than 170gms. | 3 | Nos | |
| 55 | 55 | 17.74 Providing and fixing PTMT shelf 440mm long, 124mm width and 36mm height of approved quality and colour. Weighing not less than 190gms. | 3 | Nos | |
| 56 | 56 | 18.11 Providing and Fixing GI pipes medium class make TATA complete with GI fitting make UNIK and intello tech support clamps U clamp of size 22mm and 23x1.0x2.5mm make chilly,Concealed pipe i/c paintig with corrosive bitumastic paint, cutting chases and making good the walls. 18.11.1 15mm dia nominal bore. Internal fitting | 100 | Mtr | |
| 57 | 57 | 18.15 Providing and Fixing brass bib cock of SANT / L&K 15mm Nominal Bore. | 6 | Nos | |
| 58 | 58 | 18.16.2 Providing and Fixing brass stop cock of SANT / L&K 20mm Nominal Bore. | 6 | Nos | |
| 59 | 59 | 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: 18.18.2 20mm nominal bore | 3 | Nos | |
| 60 | 60 | 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked indicating the BIS license No with cover and suitable locking arrangement and making necessary holes for inlet, out let and over flow pipes but with out fittings and the base support for tank (Sitix, Electroplate, Star, Lotus, or equivalent having valid ISI license) 500 Ltr capacity | 7 | Nos | |
| 61 | 61 | Constructing Randum Rubble masonry manhole in cement mortar 1.6( 1 cement 6 coarse sand ) RCC slab with 1:2:4 mix ( 1 cement : 2 coarse sand : 10 graded stone 40mm agg nominal size) foundation concrete 1:5:10 mix ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:6 (1 cement : 6 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone agg 20mm nominal size) finished with floating coat of neat cement complete as per standard design. Inside size 90x80cm and 45 cm deep including CI cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15 kg) ( light duty) | 5 | Nos | |
| 62 | 62 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry stone masonery honey comb shaft with stone and S.W. drain pipe 100 mm diameter, 1.8 m long make NECO/SRIF/RIF complete as per standard design. With dry stone masonery. | 3 | Nos | |
| 63 | 63 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. | 41.62 | Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
