Military Engineer Services-MES has published Provision Of Centralised Dg Power House Building And Cable Duct For Lps And Telemetry Centre Itr Tech Area Chandipur. Submission Date for this Tender is 18-11-2019. Cable Tray Tenders in Chandipur Odisha. Bidders can get complete Tender details and download the document.
| Name of Work : PROVISION OF CENTRALIZED DG POWER HOUSE BUILDING AND CABLE DUCT FOR LPS AND TELEMENTARY CENTRE, ITR TECH AREA CHANDIPUR | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Lump Sum amount worked out by the contractor for "Building Woks" as listed in Schedule 'A' section I. | 1 | Lump Sum | |
| 2 | 2 | Lump Sum amount worked out by the contractor for "Internal water Supply" as listed in Schedule 'A' section II. | 1 | Lump Sum | |
| 3 | 3 | Lump Sum amount worked out by the contractor for "Internal Electric Supply" as listed in Schedule 'A' section III. | 1 | Lump Sum | |
| 4 | 4 | Lump Sum amount worked out by the contractor for "Hard Standing" as listed in Schedule 'A' section IV. | 1 | Lump Sum | |
| 5 | 5 | Lump Sum amount worked out by the contractor for "Fire Detection and Alarm" as listed in Schedule 'A' section V. | 1 | Lump Sum | |
| 6 | 6 | Lump Sum amount worked out by the contractor for "Area Drainage" as listed in Schedule 'A' section VI. | 1 | Lump Sum | |
| 7 | 7 | Lump Sum amount worked out by the contractor for "External Cable duct (i.e. Out side building)" as listed in Schedule 'A' section VII. | 1 | Lump Sum | |
| 8 | 8 | Lump Sum amount worked out by the contractor for "Lightening Protection" as listed in Schedule 'A' section VIII. | 1 | Lump Sum | |
| 9 | 9 | Lump Sum amount worked out by the contractor for "External Water Supply" as listed in Schedule 'A' section IX. | 1 | Lump Sum | |
| 10 | 10 | Lump Sum amount worked out by the contractor for "External Electric Supply" as listed in Schedule 'A' section X. | 1 | Lump Sum | |
| 11 | 11 | Lump Sum amount worked out by the contractor for "Sewage Disposal" as listed in Schedule 'A' section XI. | 1 | Lump Sum | |
| 12 | 12 | Lump Sum price worked out by the contractor for "Site Clearance & Earth Work" as listed in Schedule 'A' section XII. | 1 | Lump Sum | |
| 13 | 13 | SUB TOTAL OF SCH 'A' SEC-I TO XII | |||
| 14 | 14 | Sch 'A' Sec-XIII (MISC ITEMS OF WORKS)\nNote : This schedule is not pre-priced by MES. Contractor has to quote his own rates. | |||
| 15 | 15 | TPN Distribution box, (DPX 160 MCCB DB VTPN 4 Way) for fixing of MCCB 63 Amps as incorner, vertical, double door of protection grade IP 54 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, 415 volt confirming to IS 13032 & 8623 complete. | 1 | EACH | |
| 16 | 16 | MCCB Continuously adjustable electronic release 4 pole, 415 volts, current rating 63 Amps, ultimate breaking capacity 63KA. | 1 | EACH | |
| 17 | 17 | MCB, SPN. 63 Amps, 240 volts AC 10 KA breaking capacity 'C' series for fixing in DBs catered above/Schedule 'A' Section III. | 1 | EACH | |
| 18 | 18 | MCB, SPN, 40 Amps, 240 volts AC, 10KA breaking capacity 'C' series for fixing in DBs catered in Sch 'A' section III or above. | 24 | EACH | |
| 19 | 19 | MCB, 'C' series SP 6 Amp to 32 Amps, 230/240 volts 10KA breaking capacity, IS-8828 marked and rating and fixing in DB's catered separately in schedule 'A' section III or here in-before. | 21 | EACH | |
| 20 | 20 | LED type light fitting 2 x 20W, 230 volts, luminaires in sleek and epoxy powder coated CRCA sheet housing with reflector cover channel, aesthetic soft contoured injection moulded ABS caps, polycarbonate lamp holder complete with energy efficient`LED on wall and ceiling by using suitable size 2 core flexible cable 23/.00076 from ceiling rose to tube fitting connection complete. | 21 | EACH | |
| 21 | 21 | LED type recess mounting 18 watt, 230 volts, with energy efficient LED on wall and ceiling by using suitable size 2 core flexible cable 23.00076 from ceiliing rose to tube fitting connection complete. | 9 | EACH | |
| 22 | 22 | Supply only ceiling fans 1200mm sweep, Fivestar (energy saving fan) white in colour of Aluminium blades (three numbers) and body, double ball bearing, down rod, fan motor, pair of canopy, shackle, assembly kit suitable for SP 230 to 250 Volts, 50HZ, AC supply includinig five step high speed electronic regulator (80 Watt) complete for fixing under schedule 'A' Section-III. \nNote:- Fan shall of make crompton Greaves, model HS-Plus or equivalent model of make specified in Appendix 'B' to Particular specifications. | 10 | EACH | |
| 23 | 23 | Supply only exhaust fan 380mm sweep, heavy duty, four blade, double ball bearing, 1400 RPM, minium air delivery discharge 3250 cubic metre per hour suitable for SP, 230/250 Volts, 50HZ, AC supply with louvres shutter complete to fix in schedule 'A' Section-III.\nNote:- Fan shall of make Cromption, Cat REF: EXHD380-4-1 or equivalent model of make specified in Appendix 'B' to Praticular specifications. | 150 | RM | |
| 24 | 24 | PVC insulated FRLS copper conductor cable twin core 1.5 Sqmm armoured 1100 volts drawn throughout and including 20mm external diameter of stove enamelled rigid steel conduit welded including fittings fixed to walls, floors, roofs and similar situation for fire detection system. | 1 | EACH JOB | |
| 25 | 25 | Cutting the existing GI pipe 150 Mtr dia bore for inserting Tee 150 x 150 x 80mm complete for external water supply. | 1 | EACH JOB | |
| 26 | 26 | Construction of masonry valve pit of internal dimension 900 x 900 x 600 mm with burnt fly ash bricks old size in cement mortar (1.6) and 10 mm thick plastering in CM 1:4 and PCC 1:4:8 type D-2 in foundation bed including MS sheet cover thickness not less than 1.6mm with locking arrangement hinged with 50x50x6mm angle iron frame embeded in PCC (1:3:6) type C-1 etc including painting with two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer to all steel surfacess and applying two coat of hot tar to embedded steel surfaces including necessary excavation and earth work in soft loose soil and removal of excavated material to a distance n.exc 50m complete. | 1 | EACH JOB | |
| 27 | 27 | Indoor type LT feeder pillar box as per the design approved by Engr-In-charge/GE, Double door type of suitable size with angle iron frame and legs,pedestal mounted CPRI approved/Certified factory made, totally enclosed,dust,vermin and water proof having IP 54 Protection, Front and rear openable type made out of CRCA sheet 2 mm thick, angle iron of suitable size conforming to relevent IS duly powder coated primer on external and internal surface, writing incoming/outgoing feeder names and having proper locking arrangements in both front and rear doors suitable for AC 440 Volts, 50 Hz, 3 phase 4 wire system including provision of cable glands of suitable size for incoming and outgoing cables,and mounted on PCC base above 60 cm from ground level and PCC platform 100 mm thick 0.5 mtr all around the panel board using PCC 1:3:6 type C1 with 20 mm graded using aggregate including necessary earthwork for protection of panel from grass/bushes, and including taking proper shutdown, disconnecting existing cable connections, dismantling/taking down old unserviceable LT Feeder pillar box with worn out switchgear/busbars/meters etc. subsequently reconnecting the cable, making good. The new feeder pillar box shall be comprising of the following incoming,busbars and outgoing accessories which will be a part of the LT Feeder pillar box\nBUSBAR :- 600 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round ) insulators of suitable size and good insulation resistance (Note- Busbar to MCCB will be connected through suitable size of Busbar/copper cable.\nINCOMING:- (i) 3 pole ACB of capacity 400 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 50 KA with microprocess based SR18G -01 No \n(ii) Indicator lamp with integral circuit (230/240 Volt)and cluster LED (RED, ORANGE, BLUE)-01 Set\n(iii) Surge Protection Device DIN mounted, 40 kA, 3P+N. Qty - 1. \n(iv) Digital Multifunction meter - 01 No.\nOutgoing :\n\n(i) MCCB 200 Amps TPN Thermal Magnetic release 25 KA - 02 Nos\n(i) MCCB 100 Amps TPN Thermal Magnetic release 25 KA - 01 No.\n(i) MCCB 63 Amps TPN Thermal Magnetic release 25 KA - 01 No. | 1 | EACH JOB | |
| 28 | 28 | All as per item No 13.13 here-in-before but suitable for housing the folowing \nBUSBAR :- 300 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite / DMC insulator bus bar support (Square / round ) insulators of suitable size and good insulation resistance (Note- Busbar to MCCB will be connected through suitable size of Busbar/copper cable.\nINCOMING:- (i) 4 pole MCCB of capacity 200 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 25 KA with thermal magnetic release type with overload adjustability -01 No \n(ii) On loadchangeover switch 4 pole 200 Amp- 01 No.\n(iii) Surge Protection Device DIN mounted, 40 kA, 3P+N. Qty - 1.\n(ii) Indicator lamp with integral circuit (230/240 Volt)and cluster LED (RED, ORANGE, BLUE)-01 Set\n(iv) Digital Multifunction meter - 01 No.\nOutgoing :\n(i) MCCB 100 Amps TPN 25 KA - 02 Nos\n(ii) MCCB 63 Amps TPN 25 KA - 02 Nos | 1 | EACH JOB | |
| 29 | 29 | MCCB 200 Amps 4 pole breaking capcity 25 KA with thermal magnaetic release including modification/extension of existing LT Panel for fixing of New MCCB by extending existing busbar and necesary sheet work using 2mm thick MS sheet including painting two coats of synthentic enamel paint over one coat red oxide zinc chrome primer and necesary connection of LT UG Cable complete all as per site requirement. | 2 | EACH JOB | |
| 30 | 30 | Cable end terminals Joints indoor/outdoor type (Epoxy joints) complete suitable for aluminum conductor cable of size 3 ½ core 185 to 240 Sqmm. | 4 | EACH | |
| 31 | 31 | LED street light fitting 75 Watt with all accessories, IP 65 attractively styled high pressure die cast housing having heat toughned glass cover housing epoxy powder coated in dark graphite grey colour complete with all accessories. | 4 | EACH JOB | |
| 32 | 32 | GI pipe Bracket made out of 40mm dia light grade pipe bend to shape of approx length 1.5mtr including 2 nos Ms clamp of flat iron of size 40x6mm complete with nut bolt washers for fixing street light fitting complete including applying two coat of aluminium paint over one coat of red oxide zinc chrome primer on all exposed steel surface. | 4 | EACH | |
| 33 | 33 | Cable junction box of size 205x255x112mm made of thermoplastic, halogen free, weather proof with metric Knock outs for cable entry from all side of box and cable entry glands for including out going and connection cable with protection grade IP-65 and suitable for LT under ground cable of 10-25 sqmm, Make : Hensel Model KF-2500 G or equivalent in Emiter & Elseka fixed to pole with two Nos clamps made out of MS flat Iron 40x6 mm with nuts, bolts and washers including painting with two coats of synthetic enamel paint over one coat zinc chrome primer on steel clamps surfaces complete. | 32 | RM | |
| 34 | 34 | PVC insulated copper conductor 1.5 sqmm 3 runs including PVC conduit heavy duty 20mm dia fixed with poles with MS clamps size 25x4.0 mm flat iron and bolts, nuts and washers at the interval of one metre and including painting on steel surfaces complete. | 12 | Each Set of one | |
| 35 | 35 | Earthing complete with copper plate electrode 60cmx60cmx6.3mm thick and copper earth strip 32x6mm from earth plate to test point approximate distance 2.5 Mtr all as shown in electrical plate No. 3 including provision of concrete pit RCC (1:3:6) type C-1, RCC pit cover of size 550x550x50mm cement concrete (1:2:4) type B-2 including handle using of 10mm dia MS Bar, funnel with wire mesh, 50mm bore galvanized iron or steel pipe including charcoal or coke, salt in alternate layers in any type of soil and testing including necessary excavation and earth work complete. | 30 | Per RM | |
| 36 | 36 | Drilling suitable dia horizontal bore holes for insertion/laying of 80/ 50mm and 40mm bore GI tubing of any description below/under road surface/floors not more than 6 mtr wide etc with using mechanical or manual devices as required at site including making good disturbed surface to match with the existing strata after laying pipes complete. | 2 | EACH | |
| 37 | 37 | Hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma for better indoor air quality with green gas technology (Non CFC refrigerant) and minimum ISEER 35 capacity 2 TR Inverter type. | 2 | EACH | |
| 38 | 38 | Contactor of 20 Amps (02 Nos) capacity and auto timer switch with connecting accessories adjustable type for operation of air conditioner with weather proof polycarbonet enclosure complete all as specified and directed. | 2 | EACH | |
| 39 | 39 | Air circulators create a 360° oscillating draught in the form of an invisible jet stream with tubo force of 750 mm sweep. | 2 | EACH | |
| 40 | 40 | Voltage stablizer for automatic operation/single phase AC supply 230V 50 Hz naturally air cooled indoor type designed for input variation between 130V to 280V with output valtage stablizer at 230V with accuracy of + 20% and capacity 5KVA. | 2 | EACH | |
| 41 | 41 | Providing, laying & consolidating 150 mm thick premix WMM (in two layers) from mix plant, including rolling by 08 to 10 tonne vibrating (Texdom) road roller to confirm uniform surface and compacted to required gradient and camber complete with mechanical paver including filler as per job design mix complete all as specified and directed | 62 | PER TEN SQUARE METRE | |
| 42 | 42 | SUB TOTAL OF SCH 'A' SEC-V |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
