Corporation Of Chennai-COC has published Supply , Installation , Testing And Commissioning And Maintence For 1Year Of Fire Protection Systems In Community Health Center ( 100 Beds ) At Manali In Dn-19 , Zone-02. Submission Date for this Tender is 23-10-2019. Fire Protection System Tenders in Ripon Building Tamil Nadu. Bidders can get complete Tender details and download the document.
| Name of Work:– Supply,Installation, testing and commissioning and maintence for 1year of Fire protection systems in Community Health Center (100 beds) at Manali in Dn-19,Zone-02 | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump Rated for 2280 LPM at 70 metres head with Electrical Motor of 60 HP of 415 volt 3 phase connection complete with base plate and accessories. (Make: Kirloskar or Equivalent). The rate inclusive of necessary vibration, bad mounting etc., as per standard method as directed by the Departmental Officers. | 1 | Each | |
| 2 | 2 | Supply, Installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of following and complete in all respects as required. a. End suction, top discharge centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg. / sq. cm at highest and farthest outlet at specified flow of 2280 LPM at 70m head conforming to IS 1520 b. 68 BHP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete. Auto starting mechanism, 12 volts / 24 volts electric starting equipment like self motor, dynamo, solenoid switches etc. c. 110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle, providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre-filter, after filter etc (Make:Kirloskar / Equivalent). d. Exhaust systemhaving flexible metallic mufler, 100mm dia MS heavy pipe extended upto 1m, outside pump house duly insulated with 50mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencer with necessary MS support arrangements from wall or ceiling as per side condition. e. Dash board consisting the instruments like temperature gauge, galvano type DC Ammeter, lubricant oil pressure gauge, ignition switch, emergency stop and all other protection equipment as per specification, stop seleneid for auto stop in the event of fault with audio indications, painted with post office red colour etc., as required f. 12V / 24 V storage battery, maintenance free tape, 180 AH rating, MS fabricated common base plate, coupling guard, foundation bolts etc., as required g. Positioning the diesel engine driven fire pump over cement concrete foundation using suitable size anti-vibration mounting arrangement. All works carried out as per standard methods and as instructed by the manufacturer and as directed by the Departmental Officers. (Make: Kirloskar / Equivalent) | 1 | Each | |
| 3 | 3 | Supply, erection, testing and commissioning of 180 LPM, 70 metres Head Pressurization Pump with 10HP electrical motor of Kirloskar make with suitable base frame Including necessary vibration bad mounting etc., including conveying, fixing and Incidental charges etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIRLOSKAR / EQUIVALENT. | 1 | Each | |
| 4 | 4 | Supply and providing 1000 litres capacity Priming Tank made up of PVC. Make: SINTEX EQUIVALENT | 1 | Each | |
| 5 | 5 | Priming Tank mounted with supporting arrangement fabricated using MS angle for the height of 3 metres from the floor level, inlet, outlet, and drain arrangements Inside the fire fighting pump room, as directed by the Departmental Officers. | 1 | Each | |
| 6 | 6 | Supplying, installation, testing and commissioning of Fire mounted type fabricated using Floating Electrical Control Panel of cubical construction, floor CRCA sheet compartmentalised with hinged lockable door dust and vermin proof, cable alley, Interconnection having switch gears and accessories mounting and internal wiring, earth terminals, numberings, necessary metering protections and Indications complete in all respect suitable for operation on 415 volt, 3 phase, 50 Hz AC supply with enclosure protection class IP 54 and mounted with the followings.\nA. Common Panel in Fire Pump House\n(i). Incomer\na. 1 No. 600A TP & N SDFU with HRC fuses\nb. 1 set of 600A, 4 bar aluminium bus bar, 415 V, 50 HZ AC supply\nc. 1 No. (0-500A) digital ammeter with selector switch & CTS\nd. 1 No. (0-500V) digital voltmeter with selector switch and control fuses\ne. 3 Nos. phase indication lamp LED type with toggle switches with control fuses\n(II). Outgoing\na. Main Fire Pump\n400 A TPN SDFU with HRC fuses with suitable HP fully automatic starter / delta starter with overload protection, digital ammeter with bullt-In selector switch and suitable CTS current sensing type single phasing preventer complete with all accessories and Internal wiring required for automatic operation, selector switch for auto / manual/OFF operation\n1 No..\nb. Jockey Pump\n125 A TPN SFU with HRC fuses with suitable HP fully automatic starter / delta starter with overload protection, current sensing type single phasing preventer complete with al accessories and Internal wiring required for automatic operation, selector switch for auto / manual operation - 1 No.\nc. Diesel Engine Control comprising of:\n1. Auto/manual selector switch and 3 attempt starting\ndevice, timers and relays as required, push buttons, start stop in manual mode\n2. Indication lamp for high low lubricant oil pressure, high water temperature and engine ON indication,\n3. Battery charger suitable for 12V/24V DC with boost and tickle selector switch, 0-15V / 0-30V DC volt meter, 0-20A DC ammeter.\n4. Al standard relays and accessories for automatic operation of diesel engine\n5. The above combined panel mounted over MS channel fabricated frame with cement concrete platform, all other connection works carried out as per standard methods and including conveying, fixing and Incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers | 1 | Each | |
| 7 | 7 | Supplying, erection, testing and commissioning of Diesel Engine Pump Main |Control Panel & Jockey Pump including necessary auto cut-in, cut-off and manual operations, battery charger switch arrangements, voltmeter, ammeter and running indication siren provision, wall mounting type, etc., as per the standard mothod and as directed by the Departmental officers. | 1 | Each | |
| 8 | 8 | Supply and laying of sizes 3 core 95 sq.mm. armoured aluminium cable of Armoured Aluminium Cables for electrical motor, control panel, pressure switch, jockey motor etc., The rate inclusive of all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary , etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT. | 25 | Mtr | |
| 9 | 9 | Supply and laying of sizes 4 core 16 sq.mm. armoured aluminium cableof Armoured Aluminium Cables for electrical motor, control panel, pressure switch, jockey motor etc., The rate inclusive of all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary , etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT. | 30 | Mtr | |
| 10 | 10 | Supply and laying of sizes 4 core 10 sq.mm. armoured aluminium cable of Armoured Aluminium Cables for electrical motor, control panel, pressure switch, jockey motor etc., The rate inclusive of all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary , etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT. | 20 | Mtr | |
| 11 | 11 | Supply and laying of sizes 2 core 1.5 sq.mm. armoured multi strand aluminium cable of Armoured Aluminium Cables for electrical motor, control panel, pressure switch, jockey motor etc., The rate inclusive of all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary , etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT. | 50 | Mtr | |
| 12 | 12 | Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all solls and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated\nearth as per the standard specification and as directed by the Departmental Officers. | 2 | No | |
| 13 | 13 | Supply, erection, testing and commissioning of 250mm dia MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard by the Departmental Officers. Make: JINDAL / EQUIVALENT | 10 | Mtr | |
| 14 | 14 | Supply, erection, testing and commissioning of 200 mm dia MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard by the Departmental Officers. Make: JINDAL / EQUIVALENT | 15 | Mtr | |
| 15 | 15 | Supply, erection, testing and commissioning of 150 mm dia MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard by the Departmental Officers. Make: JINDAL / EQUIVALENT | 250 | Mtr | |
| 16 | 16 | Supply, erection, testing and commissioning of 100 mm dia MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard by the Departmental Officers. Make: JINDAL / EQUIVALENT | 125 | Mtr | |
| 17 | 17 | Supply, erection, testing and commissioning of 80mm dia MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard by the Departmental Officers. Make: JINDAL / EQUIVALENT | 96 | Mtr | |
| 18 | 18 | Supply, erection, testing and commissioning of 50mm dia MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard by the Departmental Officers. Make: JINDAL / EQUIVALENT | 65 | Mtr | |
| 19 | 19 | Supply, erection, testing and commissioning of 25mm dia MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard by the Departmental Officers. Make: JINDAL / EQUIVALENT | 405 | Mtr | |
| 20 | 20 | Wrapping and coating anti-corrosive treatment for the 150 mm dia under ground MS pipe having one coat of anti corrosive metal primer, one layer of asphalt tar tape wound over the MS pipe as per standard methods as per standard specifications and as directed by the Departmental Officers. | 30 | Mtr | |
| 21 | 21 | Supply, erection, testing and commissioning 200mm dia of cast iron body and bronze internal non-risng spindly sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMES / KARTAR / EQUIVALENT | 2 | Nos | |
| 22 | 22 | Supply, erection, testing and commissioning 150mm dia of cast iron body and bronze internal non-risng spindly sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMES / KARTAR / EQUIVALENT | 6 | Nos | |
| 23 | 23 | Supply, erection, testing and commissioning 80mm dia of cast iron body and bronze internal non-risng spindly sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMES / KARTAR / EQUIVALENT | 2 | Nos | |
| 24 | 24 | Supply, erection, testing and commissioning of 200 mm sizes of Heavy Duty Foot Valve including all accessories, such as, MS flange of table ‘E’, Gaskets, bolts & nuts, etc., installed at end of 150 / 200mm dia suction pipe line at sump including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete and as per standard specification and as directed by the Departmental Officers. Make: NORMES / KARTAR / EQUIVALENT | 2 | Nos. | |
| 25 | 25 | Supply, erection, testing and commissioning of 150mm sizes of Heavy Duty Foot Valve including all accessories, such as, MS flange of table ‘E’, Gaskets, bolts & nuts, etc., installed at end of 150 / 200mm dia suction pipe line at sump including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete and as per standard specification and as directed by the Departmental Officers. Make: NORMES / KARTAR / EQUIVALENT | 2 | Nos. | |
| 26 | 26 | Supply, erection, testing and commissioning of 100mm sizes of Heavy Duty Foot Valve including all accessories, such as, MS flange of table ‘E’, Gaskets, bolts & nuts, etc., installed at end of 150 / 200mm dia suction pipe line at sump including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete and as per standard specification and as directed by the Departmental Officers. Make: NORMES / KARTAR / EQUIVALENT | 1 | Nos. | |
| 27 | 27 | Supply, erection, testing and commissioning of 150mm dia Cast iron body and Gun metal or stainless steel internal Non return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary Ms flange of table ‘E’, gaskets, bolts & nuts, etc., as per IS 5312 including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. | 2 | Nos | |
| 28 | 28 | Supply, erection, testing and commissioning of 100mm dia Cast iron body and Gun metal or stainless steel internal Non return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary Ms flange of table ‘E’, gaskets, bolts & nuts, etc., as per IS 5312 including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. | 2 | Nos | |
| 29 | 29 | Supply, erection, testing and commissioning of Gun metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., completer as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT. | 2 | Nos | |
| 30 | 30 | Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed\nat delivery pipe line in pump house to read the developing pressure including conveyance all Incidental charges, neccessary scaffolding and re-doing\nthe dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: H-GURU/ISI MAKE/EQUIVALENT | 5 | Nos | |
| 31 | 31 | Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Danfoss Including necessary valves, couplings, etc. connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc.,\ncompleted as per standard specification and as directed by the Departmental Officers. Make: DANFOSS / INDFOS / ISI MAKE EQUIVALENT. | 6 | Sets | |
| 32 | 32 | Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including\nconveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc. complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT. | 6 | Nos. | |
| 33 | 33 | Supply and fixing of Fire fighting application oblique type stainless steel Hydrant valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. | 4 | Nos | |
| 34 | 34 | Supply and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. | 20 | Nos | |
| 35 | 35 | Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary., etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. | 4 | Nos | |
| 36 | 36 | Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. | 10 | Nos | |
| 37 | 37 | Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. | 10 | Nos | |
| 38 | 38 | Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary qunol metal 63mm dia non return spring shutter\narrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all\nincidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per\nstandard specification and as directed by the Departmental Officers. Make: KARTAR / OMEX / EQUIVALENT. | 1 | Nos | |
| 39 | 39 | Supply, erection, testing and commissioning of Fire Fighting 2 Way Fire Brigade Inlet with necessary qunol metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all\nincidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per\nstandard specification and as directed by the Departmental Officers. Make: KARTAR / OMEX / EQUIVALENT. | 1 | Nos | |
| 40 | 40 | Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., Including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY / FIRST / EQUIVALENT | 12 | Nos | |
| 41 | 41 | Supply and fixing of Carbon-di-Oxide Gas Type 2 kg capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc. complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT | 10 | Nos | |
| 42 | 42 | Supply and kept in position of Trolley Mounted Water CO2 Stored Pressure Type 50 litres capacity Fire Extinguisher as per IS13385, complete with control\nvalve, gun metal cap, pressure gauge, operation sticker, discharge hose, mounting trolley with moving wheel, safety clip, etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY\nFIRST / EQUIVALENT | 1 | Nos | |
| 43 | 43 | Supply and kept in position of Trolley Mounted Type 22.5 kg. Carbon-di-Oxide Fire Extinguisher as per IS 15683, complete with control valve, gun metal cap,\npressure gauge, operation sticker, discharge hose, mounting trolley with moving wheel, safety clip, etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY / FIRST / EQUIVALENT | 1 | Nos | |
| 44 | 44 | Supply, erection, testing and commissioning of 65 mm dia MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard by the Departmental Officers. Make: JINDAL / EQUIVALENT | 65 | Mtr | |
| 45 | 45 | Supply, erection, testing and commissioning of 40 mm dia MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard by the Departmental Officers. Make: JINDAL / EQUIVALENT | 30 | Mtr | |
| 46 | 46 | Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., completer as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT. | 200 | Nos | |
| 47 | 47 | Supply, Installation, testing and commissioning of Micro Processor based Conventional 12 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volts, 7AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. | 1 | Nos | |
| 48 | 48 | Supply, Installation, testing and commissioning of Micro Processor based Conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volts, 7AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. | 1 | Set. | |
| 49 | 49 | Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS junction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent) | 110 | Nos | |
| 50 | 50 | Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Equivalent) | 8 | Nos | |
| 51 | 51 | Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Equivalent) | 8 | Nos | |
| 52 | 52 | Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm Armoured Copper Cable on Ceiling / wall using fixing accessories like screws, plug, clamp, etc., as per standard methods and as directed by the Departmental Officers. | 1200 | Nos | |
| 53 | 53 | Supply, fixing, testing and commissioning of air vessel tank shall be fabricated out of of 250 mm dia MS pipe to 1000 mm long complete with 25mm inlet, 25mm drain, 25mm dia connection for air release valve including legs, painting with red oxide primer and finished with fire red enamel paint. It shall be inclusive of all relevant pipes, valves, specials upto pump header and other accessories etc.(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works ) | 1 | Nos | |
| 54 | 54 | Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 500 mm. Size of the tray shall be suitable for laying the above mentioned cables.(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works ) | 55 | Mtr | |
| 55 | 55 | Supplying, installing, testing and commissioning C.I. butterfly valves as per BS 5155 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works )\n200mm dia | 2 | Nos | |
| 56 | 56 | Supplying, installing, testing and commissioning C.I. butterfly valves as per BS 5155 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works )\n150mm dia | 4 | Nos | |
| 57 | 57 | Supplying, installing, testing and commissioning C.I. butterfly valves as per BS 5155 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works )\n100mm dia | 4 | Nos | |
| 58 | 58 | Supplying, installing, testing and commissioning C.I. butterfly valves as per BS 5155 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works )\n50mm dia | 4 | Nos | |
| 59 | 59 | Supplying, installing and commissioning C.I.flanged "Y" type Strainer with SS mesh,suitable flanges, nuts, bolts, gaskets etc. complete.(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works )\n100mm dia | 2 | Nos | |
| 60 | 60 | Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Medium grade (Class-B), ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls whereever required and making them good with filler material. The aboveground pipes shall be proteected by one coat of zinc chromate or red oxide primer and two coats of synthetic enamel paing of fire red in colour shade 536 as per IS 5.\n(Including Transportation & Miscellaneous Works )\nExhuast pipe for Diesel engine of 150 mm dia M.S. Medium grade with mineral wool insulation with aluminum sheet. The quoted rate shall include 150 mm diameter MS pipe medium grade conforming to IS 1239 Part-1 and mineral wool insulation with aluminum sheeting and Pipe supports also. (Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works ) | 18 | Mtr | |
| 61 | 61 | Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type.(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works )\nA) 25mm nominal dia | 6 | No. | |
| 62 | 62 | supply and fixing of pre-fabricated steel structural materials using MS angle, channel, plate and similar sections for supporting suction and delivery pipe and manifold of fire pumps. The quoted rate shall includes necessary bolt, nut etc. and one coat of promer and synthetic enamal painting of approved shade. (Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works )\n | 500 | Kg | |
| 63 | 63 | Fire buckets round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket. Fire bucket stand fabricated by MS angles to install 4 Nos. of buckets.(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works ) | 6 | Nos | |
| 64 | 64 | Supplying, installing, testing and commissioning of C.I. wafer type butterfly valves as per BS 5155 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works )\n80 mm dia | 2 | Nos | |
| 65 | 65 | PUBLIC ADDRESS SYSTEM: Providing & Fixing of duly wired Equipment Rack to accommodate all above mentioned control equipment like console, amplifier, DVD player etc.(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works ) | 1 | Nos | |
| 66 | 66 | Supplying, installing, testing and commissioning of 6- zone selector P.A. console (call station) and with feather type Switches and All accessories.(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works ) | 1 | Nos | |
| 67 | 67 | Providing and Fixing of Gooseneck Microphone with Features : Dynamic Directivity: Cardioid Frequency response : 100Hz÷12 kHz Sensitivity: (OdB-1V/micro bar,1000 Hz) -75dB±3dBOutput impedance :500ohm (Approved by CE Buildings) | 1 | Nos | |
| 68 | 68 | Supplying, installing, testing and commissioning solid state Amplifier of 500W RMS out put in rack, including necessory control wires, jacks etc. complete. (Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works ) | 1 | Nos | |
| 69 | 69 | Supplying, installing, testing and commissioning 6W ceiling Mount type speakers. (Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works ) | 50 | Nos | |
| 70 | 70 | Supply,Installation,Testing & Commisioning of DVD player with USB Content Playback Multi Disc and Format Playback Fast and Slow Playback with Sound Multi Disc Resume Progressive Scan Child Lock(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works ) | 1 | Nos | |
| 71 | 71 | Supplying, installing, testing and commissioning of 2C x 1.0 mm², armoured, single strand, outer sheathed, FRLS, PVC insulated copper conductor cable confirming to specified IS standards .(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works ) | 440 | MTR | |
| 72 | 72 | Supplying, installing, testing and commissioning of 2C x 0.6 mm², unarmoured, single strand, outer sheathed, FRLS, PVC insulated copper conductor cable confirming to specified IS standards .(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works ) | 520 | MTR | |
| 73 | 73 | Supplying, installing, testing and commissioning approved make 20 mm diameter PVC conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.(Approved by CE Buildings)\n(Including Transportation & Miscellaneous Works ) | 360 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
