Removing Leakages Choke Up Contamination And Repairing Valve And Lowering Laying Pipe Line At Various Places In Zone No 2 ., TOWN HALL AURANGABAD-Maharashtra

Removing Leakages Choke Up Contamination And Repairing Valve And Lowering Laying Pipe Line At Various Places In Zone No 2 . , excavation for foundation / pipe trenches in earth , soils of all types , sand , gravel and soft murum , including removing the excavated material upto a distance of 50 metres and lifts as below , stacking and spreading as directed , normal dewatering , preparing the bed for foundation and excluding backfilling , etc comp . lift 0 to 1 . 50 m a1mjp/dsr/2019-20/page no . 33 i . no . 1 , excavation for foundation / pipe trenches in hard murum and boulders , w . b . m . road including removing the excavated material upto a distance of 50 metres and lifts as below , stacking and spreading as directed , normal dewatering , preparing the bed for foundation and excluding backfilling , etc comp . lift 0 to 1 . 50 m mjp/dsr/2019-2020/ page no . 33 i . no . 3 , excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road by all means including removing the excavated material upto a distance of 50 metres and lifts as below , stacking and spreading as directed , normal dewatering , preparing the bed for foundation and excluding backfilling , etc comp . lift 0 to 1 . 50 m mjp/dsr/2019-2020/ page no . 33 i . no . 5 , excavation for foundation / pipe trenches in hard rock and concrete road by chiselling , wedging , line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed , removing the excavated material upto a distance of 50 metres and lifts as below , stacking and spreading as directed , normal dewatering , preparing the bed for foundation and excluding backfilling , etc comp . lift 0 to 1 . 50 m mjp/dsr/2019-2020/ page no . 34 i . no . 7 , providing and supplying asbestos cement pressure pipes manufactured and tested as per iso-160 standards of following class and diameter in standard lengths including cost of all taxes ( central and local ) , insurance , railway freight , inspection charges , unloading from railway wagon , loading into truck , transporting to departmental store/site , unloading , stacking etc . complete mjp/dsr/2012-2013/page no . 57 . i . no . 1 , a ) class 15 ( test pressure 1 . 5 mpa ) , 80mm , 100mm , 150mm , 200mm , 250mm , 300mm , lowering , laying and jointing with cid joints , a . c . pressure pipes and ci or ms specials of following class and diameters including conveyance from stores to site of works , cost of labour and material , giving satisfactory hydraulic testing , etc . as per isi code , etc . complete but excluding cost of c . i . d . joints , nut bolts , rubber rings . mjp/dsr/2012-2013/ p . no . 59 i . no . 4 ( a ) , a ) class 15 ( test pressure 1 . 5 mpa ) , 80mm , 100mm , 150mm , 200mm , 250mm , 300mm , providing and supplying c . i . detachable joints suitable for a . c . pressure pipes manufactured as per is- 1538 / 1993 standards of following class and dimeter including cost of insurance , railway freight , inspection charges , unloading from railway wagon , loading into truck , transporting to departmental store , unloading , stacking and cost of rubber rings , nut bolts , excluding gst levied by goi & gom in all respect etc . complete . mjp/dsr/2019-2020/page no . 64 i . no . 13 , class 10 /15 , 80 mm , 100 mm , 150 mm , 200 mm , 250 mm , 300 mm , checking & repairing private water connection and reconnecting the same etc complete , disconnection of unauthorised private water connection etc . complete . , providing and supplying i . s . i . mark rubber gasket suitable for c . i . or d . i . pipe of all class for tyton joints including inspection charges , transportation upto departmental stores excluding gst levied by goi & gom in all respect etc . complete . mjp/dsr/2019-2020/page no . 137 i . no . 21 ( a ) , 100mm , 150mm , 200mm , 250mm , supply of c . i . mechanical compression collar coupling suitable for c . i spun pipes ( as per is-1536 /2001 ) and complete with sealing rubber gasket of sbr , c . i . follower glands and m . s . nut bolts . the whole assembly should be mechanically and hydraulically tested to the provisions as laid down in is: 1538 / 1993 mjp/dsr/2018-2019/page no . 140 i . no . 2 , 200 mm , 250 mm , 300 mm , 400 mm , 450 mm , making cross connection to existing distribution main of any type including excavation , breaking and removing existing pipes , lowering , laying of specials and pipes in their position , refilling , closing the water supply in that area , dewatering and restarting the water supply , etc . complete as directed by engineer-in-charge for following diameters of existing pipeline , irrespective of diameter of branch line . ( the number of joints involved will be paid separately depending upon the nature of joints and required pipes , valves and specials will be supplied free of cost at stores ) mjp/dsr/2019-2020/page no . 47 i . no . 10 , 100 mm , 150 mm , 200 mm , 250 mm , 300 mm , 350 mm , providing double flanged sluice valves confirming to is- 2906 / 14846 including worm gear arrangements as per test pressure , stainless steel spindle , caps , including inspection charges , transportation upto departmental store , unloading , stacking excluding gst levied by goi & gom in all respect etc . complete . pn-1 . 0 ( without bypass arrangement ) mjp/dsr/2019-2020/page no . 127 i . no . 2 ( a ) , 80 mm , 100 mm , 150 mm , 200 mm , 250 mm , lowering laying and jointing in position following c . i . d/f reflux valves , butterfly valves and sluice valves including cost of all labour , jointing material , including nut bolts and giving satisfactory hydraulic testing , etc complete . sluice valves mjp/dsr/2019-2020/page no . 130 i . no . 4 , 80 mm , 100 mm , 150 mm , 200 mm , 250 mm , removing existing cross connection and remaking the same etc complete ( 70% rate of making cross connection . ) mjp/dsr/2019-2020/page no . 47 . i . no . 10 , 80 mm , 100 mm , 150 mm , 200 mm , 250 mm , 300 mm , 350 mm , removing and refixing the half body of sluice valves including excavation , refilling , cost of rubber packing , nut bolts , with gate , gland rope , repair by welding etc complete ( 70 % rate of laying sluice valves ) mjp/dsr/2019-2020/ page no . 131 i . no . 4 , 80 mm , 100 mm , 150 mm , 200 mm , 250 mm , 300 mm , 350 mm , 400 mm , 450 mm , 500 mm , 600 mm , providing and supplying s . s . spindle rod as per standard specifications and suitable for sluice valves etc complete . ( as per market rate ) , 80 mm , 100 mm , 150 mm , 200 mm , 250 mm , 300 mm , 350 mm , 400 mm , 450 mm , 500 mm , 600 mm , providing and supplying gun metal check nut of following diameter of sluice valves as per standard specifications , etc . complete , 80 mm , 100 mm , 150 mm , 200 mm , 250 mm , 300 mm , 350 mm , 400 mm , 450 mm , 500 mm , 600 mm , repair the gate by welding to make it in orignal position etc comp , 100 mm , 150 mm , 200 mm , 250 mm , 300 mm , providing and fixing m . s . extension rod as per site requirment to fix above existing sluice valve as directed by enginee

INR 600 /-

INR 20887.0 /-

INR 20.88 Lakhs /-

Name of Work: Removing Leackages Choke up Contamination and Repairing Valve and Lowering laying pipe line at various places in Zone no 2.
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 M A1MJP/DSR/2019-20/Page no.33 I.No.1	1	1000	Cum
2	2	Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 M MJP/DSR/2019-2020/ Page No.33 I.No.3	2	750	Cum
3	3	Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road by all means including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 M MJP/DSR/2019-2020/ Page No.33 I.No.5	3	350	Cum
4	4	Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc comp. Lift 0 to 1.50 M MJP/DSR/2019-2020/ Page No.34 I.No.7	4	100	Cum
5	5	Providing and Supplying Asbestos Cement Pressure Pipes manufactured and tested as per ISO-160 standards of following class and diameter in standard lengths including cost of all taxes (Central and local), insurance, railway freight, inspection charges, unloading from railway wagon, loading into truck, transporting to departmental store/site, unloading, stacking etc. complete MJP/DSR/2012-2013/Page no.57. I.no. 1	5	0.001	Nos
6	6	A) Class 15 ( Test Pressure 1.5 Mpa)	6	0.001	Nos
7	7	80mm	7	10	Rmt
8	8	100mm	8	50	Rmt
9	9	150mm	9	50	Rmt
10	10	200mm	10	20	Rmt
11	11	250mm	11	5	Rmt
12	12	300mm	12	5	Rmt
13	13	Lowering, laying and jointing with CID joints, A.C. pressure pipes and CI or MS specials of following class and diameters including conveyance from stores to site of works, cost of labour and material, giving satisfactory hydraulic testing, etc. as per ISI code, etc. complete but excluding cost of C.I.D. joints, nut bolts, rubber rings. MJP/DSR/2012-2013/ P.No.59 I.no. 4 (A)	13	0.001	Nos
14	14	A) Class 15 ( Test Pressure 1.5 Mpa)	14	0.001	Nos
15	15	80mm	15	10	Rmt
16	16	100mm	16	50	Rmt
17	17	150mm	17	50	Rmt
18	18	200mm	18	20	Rmt
19	19	250mm	19	5	Rmt
20	20	300mm	20	5	Rmt
21	21	Providing and supplying C.I.detachable joints suitable for A.C. pressure pipes manufactured as per IS- 1538 / 1993 standards of following class and dimeter including cost of insurance, railway freight, inspection charges, unloading from railway wagon, loading into truck, transporting to departmental store, unloading, stacking and cost of rubber rings, nut bolts, excluding GST levied by GOI & GOM in all respect etc. complete. MJP/DSR/2019-2020/Page no. 64 I.no.13	21	0.001	Nos
22	22	Class 10 /15	22	0.001	Nos
23	23	80 mm	23	20	No
24	24	100 mm	24	100	No
25	25	150 mm	25	100	No
26	26	200 mm	26	25	No
27	27	250 mm	27	5	No
28	28	300 mm	28	5	No
29	29	Checking & Repairing Private Water connection and reconnecting the same etc complete	29	50	No
30	30	Disconnection of unauthorised private water connection etc.complete.	30	50	No
31	31	Providing and supplying I.S.I. mark rubber gasket suitable for C.I. or D.I. pipe of all class for tyton joints including inspection charges, transportation upto departmental stores excluding GST levied by GOI & GOM in all respect etc. complete. MJP/DSR/2019-2020/Page no.137 I.No.21 (A)	31	0.001	Nos
32	32	100mm	32	2	No
33	33	150mm	33	2	No
34	34	200mm	34	2	No
35	35	250mm	35	2	No
36	36	Supply of C.I. Mechanical Compression Collar Coupling suitable for C.I Spun Pipes ( as per IS-1536 /2001) and complete with sealing rubber gasket of SBR, C.I. follower Glands and M.S. nut bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS: 1538 / 1993 MJP/DSR/2018-2019/Page no.140 I.No.2	36	0.001	Nos
37	37	200 mm	37	1	No
38	38	250 mm	38	1	No
39	39	300 mm	39	1	No
40	40	400 mm	40	1	No
41	41	450 mm	41	1	No
42	42	Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line. ( The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores) MJP/DSR/2019-2020/Page no.47 I.No.10	42	0.001	Nos
43	43	100 mm	43	1	No
44	44	150 mm	44	1	No
45	45	200 mm	45	1	No
46	46	250 mm	46	1	No
47	47	300 mm	47	1	No
48	48	350 mm	48	1	No
49	49	Providing double flanged Sluice Valves confirming to IS- 2906 / 14846 including worm gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. PN-1.0 ( without bypass arrangement) MJP/DSR/2019-2020/Page no.127 I.No.2 (A)	49	0.001	Nos
50	50	80 mm	50	1	No
51	51	100 mm	51	6	No
52	52	150 mm	52	6	No
53	53	200 mm	53	2	No
54	54	250 mm	54	1	No
55	55	Lowering laying and jointing in position following C.I. D/F Reflux Valves, Butterfly Valves and Sluice Valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc complete. Sluice Valves MJP/DSR/2019-2020/Page no.130 I.No.4	55	0.001	Nos
56	56	80 mm	56	1	No
57	57	100 mm	57	6	No
58	58	150 mm	58	6	No
59	59	200 mm	59	2	No
60	60	250 mm	60	1	No
61	61	Removing existing cross connection and remaking the same etc complete (70% Rate of making cross connection.) MJP/DSR/2019-2020/Page no.47. I.No.10	61	0.001	Nos
62	62	80 mm	62	1	No
63	63	100 mm	63	25	No
64	64	150 mm	64	25	No
65	65	200 mm	65	5	No
66	66	250 mm	66	2	No
67	67	300 mm	67	1	No
68	68	350 mm	68	1	No
69	69	Removing and refixing the half body of Sluice Valves including excavation, refilling, cost of rubber packing, nut bolts, with gate, gland rope, repair by welding etc complete (70 % Rate of laying Sluice Valves ) MJP/DSR/2019-2020/ Page no.131 I.No.4	69	0.001	Nos
70	70	80 mm	70	2	No
71	71	100 mm	71	40	No
72	72	150 mm	72	40	No
73	73	200 mm	73	10	No
74	74	250 mm	74	5	No
75	75	300 mm	75	5	No
76	76	350 mm	76	5	No
77	77	400 mm	77	5	No
78	78	450 mm	78	5	No
79	79	500 mm	79	5	No
80	80	600 mm	80	5	No
81	81	Providing and supplying S.S. spindle rod as per standard specifications and suitable for Sluice Valves etc complete. (As Per Market rate )	81	0.001	Nos
82	82	80 mm	82	5	No
83	83	100 mm	83	5	No
84	84	150 mm	84	5	No
85	85	200 mm	85	5	No
86	86	250 mm	86	5	No
87	87	300 mm	87	5	No
88	88	350 mm	88	5	No
89	89	400 mm	89	5	No
90	90	450 mm	90	2	No
91	91	500 mm	91	2	No
92	92	600 mm	92	2	No
93	93	Providing and supplying Gun metal check nut of following diameter of Sluice Valves as per standard specifications, etc. complete	93	0.001	Nos
94	94	80 mm	94	5	No
95	95	100 mm	95	5	No
96	96	150 mm	96	5	No
97	97	200 mm	97	5	No
98	98	250 mm	98	5	No
99	99	300 mm	99	5	No
100	100	350 mm	100	5	No
101	101	400 mm	101	5	No
102	102	450 mm	102	2	No
103	103	500 mm	103	2	No
104	104	600 mm	104	2	No
105	105	Repair the gate by welding to make it in orignal position etc comp	105	0.001	Nos
106	106	100 mm	106	1	No
107	107	150 mm	107	1	No
108	108	200 mm	108	1	No
109	109	250 mm	109	1	No
110	110	300 mm	110	1	No
111	111	Providing and fixing M.S. extension rod as per site requirment to fix above existing sluice valve as directed by engineer in charge etc. complete. (As per Market Rate)	111	0.001	No
112	112	100 mm	112	5	No
113	113	150 mm	113	5	No
114	114	200 mm	114	5	No
115	115	Providing and Supplying M.S. clamp for pipes of following diameters etc comp. (As Per Market rate )	115	0.001	No
116	116	80 mm	116	5	No
117	117	100 mm	117	10	No
118	118	150 mm	118	10	No
119	119	200 mm	119	10	No
120	120	250 mm	120	5	No
121	121	300 mm	121	2	No
122	122	350 mm	122	2	No
123	123	400 mm	123	2	No
124	124	450 mm	124	2	No
125	125	Providing and supplying ISI standard CI flanged / S & S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truk, transport to departmental stores, unloading, stacking, etc. complete. C) Plain ended/plain ended branch flanged specials - i) 80 mm dia to 300 mm dia MJP/DSR/2019-2020/ Page no.60, I.No.6 (C)	125	100	Kg
126	126	Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint ( Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding GST levied by GOI & GOM in all respect including inspection charges, transportation to stores and stacking, etc. complete. e) Plain ended specials or plain ended branch flanged specials of all diameters. MJP/DSR/2019-2020/Page no.61 I.no.7(e)	126	50	Kg
127	127	Providing ISI mark G.I. pipe of following class and diameter excluding GST levied by GOI & GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239 / 2004 (Note :- One coupler shall be provided with each full length of pipe cost of which is included in rates below) Medium Class. MJP/DSR/2019-2020/Page no.71, I.No.1, (b)	127	0.001	No
128	128	15 mm	128	2	Rmt
129	129	20 mm	129	2	Rmt
130	130	25 mm	130	2	Rmt
131	131	50 mm	131	2	Rmt
132	132	80 mm	132	2	Rmt
133	133	Lowering, laying and jointing G I pipes and specials of following class and diameter including conveyance from stores to site of works, all labour etc. complete, either underground or in vertical position, as directed by Engineer-in-charge. Medium Class. MJP/DSR/2019-2020/Page no.72, I.No.2 ( b )	133	0.001	No
134	134	15 mm	134	2	Rmt
135	135	20 mm	135	2	Rmt
136	136	25 mm	136	2	Rmt
137	137	50 mm	137	2	Rmt
138	138	80 mm	138	2	Rmt
139	139	Dismantlling dead pipe line of MS/RCC/CI/PSC and GI /AC/ PVC/SW/HDPE pipe including cost of necessary excavation & refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-charge with al leads and lifts including cleaning the surface, etc complete. A) MS/RCC/CI/PSC/DI pipes. MJP/DSR/2019-2020/Page no.48 I.no.11 (A)	139	0.001	No
140	140	100 mm	140	5	Rmt
141	141	150 mm	141	5	Rmt
142	142	200 mm	142	5	Rmt
143	143	250 mm	143	5	Rmt
144	144	Dewatering the excavated trenches and pools of water in the pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. MJP/DSR/2019-2020/Page no.35 I.no.14	144	50	HP/Hr
145	145	Providing & laying in situ cement concrete M-15/1:2:4 of trap/granite/ quartzite/ gness metal for foundation and bedding including dewatering, compacting and curing etc. complete. PWD/DSR/2015-16/P.NO 287 I no 29	145	5	Cum
146	146	Providing and Constructing B.B. masonary valve chamber with 15cm thick 1:2:4 proportion PCC bedding, excluding excavation, B.B.Masonary in CM 1:5 proportion, precast SFRC frame and cover, etc. complete as directed by Engineer-in-charge. Note: Wall thickness: 0.23 M for depth of 1.20 M and 0.35 M for balance depth exceeding 1.2 M. MJP/DSR/2019-2020/Page no.209 I.no.3(D)	146	0.001	No
147	147	D) As above of 90 x 90 cm internal size and depth upto 1.2 m with SFRC frame and cover.	147	1	No
148	148	Add Rs 1751.00 for every increase in depth of 30 cm or part thereof.	148	0.001	No
149	149	Providing and making lead caulked joint with molten lead to Cast Iron pipes and / or specials of all classes and fitting of following dia including cost of lead and all jointing material, labour, hydraulic testing etc. complete. MJP/DSR/2019-2020/Page no 60 I.no.4	149	0.001	No
150	150	250 mm	150	2	Rmt
151	151	300 mm	151	2	Rmt
152	152	Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc.complete. MJP/DSR/2019-2020/Page no.36 I.No.15	152	2200	Cum