Construction Of Rcc Building ( G Plus 1 ) For Office Of The Asstt Director Of Industries And Commerce Rangia Dis Kamrup, Rangia Kamrup (Rural)-Assam

TDR : 22059376

Tender Notice
BOQ

Expired

Rangia Kamrup (Rural) , Assam

Tender Brief : Construction Of Rcc Building ( G Plus 1 ) For Office Of The Asstt Director Of Industries And Commerce Rangia Dis Kamrup

Document Fees
₹ 3200 /-

EMD
₹ 317500.0 /-

Tender Value
₹ 1.58 Crore /-

Submission Date
16-10-2019

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Construction of RCC building (G+1) for office of the Asstt. Director of Industries & Commerce, Rangia, Dis- Kamrup.
1	1	CIVIL - Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil	item1	101.38	Cum
2	2	Shuttering & shoring the earth at diferent levels in foundations where necessary with required prop , struts, planks, timbers, nails etc. including dewatering if necessary , complete as direted and specified a) Upto a depth 1.5metre	item2	221.76	sqm
3	3	Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.	item3	218.53	Cum
4	4	Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city	item4	434.36	Cum
5	5	Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop 1cement: 3 sand :6 coarse aggregate by volume	item5	3.78	cum
6	6	Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3	item6	21.3	cum
7	7	ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. P) Using admixture, plasticiser etc b) M20 grade concrete or Prop. 1:1.5:3	item7	228.42	cum
8	8	c) Vertical and horizontal fins (thickness not more than 100mm) individually or forming box louvre and projected band.	item8	7.35	cum
9	9	Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.	item9	18.75	Sqm
10	10	Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.	item10	243.06	Sqm
11	11	Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (a) In Sub-structure upto plinth level including dewatering if necessary 1:4 in proportion	item11	35.17	Cum
12	12	Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary and curing complete as directed in super structure above plinth level up to 1st floor level.	item12	1.2	Cum
13	13	(b) In superstructure above plinth level up to 1st floor level.	item13	483.27	Sqm
14	14	Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work (a) Using 25mm thick plank	item14	1259.39	Sqm
15	15	20 mm thick cement plaster in two coats, backing coat 15mm and finishing coat 5mm on rough side of single or half brick wall for interior plastering upto 1st floor level including arrises and/or rounded angles not exceeding 80 mm in girth and finished even and smooth including curing complete as directed. a) In cement mortar 1:4	item15	601.43	Sq.m
16	16	20 mm thk. cement plaster in two coats, backing coat 10 mm and finishing coat 10mm thick on fair side of brick/ stone masonary walls for interior plastering upto 1st floor level including arrises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80 mm in grith and finished even and smooth including curing complete as directed. a) In cement mortar 1:4	item16	601.43	Sq.m
17	17	Extra for plastering on ceiling and soffits of stair up to 1st floor level including curing complete as directed.	item17	1023.47	Sq.m
18	18	10 mm thk. cement plaster in single coats on fair side of brick/concrete walls for interior plastering upto 1st floor level including arrises, internal rounded angles not exceeding 80 mm in girth and finished even and smooth including curing complete as directed. a) In cement mortar 1:3	item18	242	Sq.m
19	19	15 mm thk. cement plaster in single coats on rough side of single or half brick walls for interior plastering upto 1st floor level including arrises, internal rounded angles not exceeding 80 mm in girth and finished even and smooth including curing complete as directed.	item19	175	Sq.m
20	20	15 mm thick plain cement mortar bands in cement morter 1:4 above 300 mm in width including curing complete as directed.a) Flush Band	item20	50	Sq.m
21	21	b) Sunk Band	item21	70	Sq.m
22	22	c) Raised Band	item22	90	Sq.m
23	23	65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete 1:3:6: ( 1 cement : 3 coarse sand : 6 coarse agg. of size 25 mm down ) and 15 mm thick wearing layer in cement concrete 1:1:2 ( 1 cement : 1 coarse sand : 2 coarse agg. of size 10 mm down ) laid in panels and finished with a floating coat of neat cement finish ( using cement slurry for bond & 2.75 kg per Sq. m. of floor area ) including curing etc. complete as directed.	item23	100.1	Sq.m
24	24	Plain cement concrete floor base in prop 1:3:6 layed in alternative bays as specified with coarse agg. Of size 13mm to 32mm including dewatering if necessary and curing etc. compolete. 50mm thick	item24	180	Sq.m
25	25	Cement plaster skirting with cement mortar ( 1 cement : 3 coarse sand ) finished with a floating coat of neat cement including rounding of juctions with floor. a) 20 mm thick .	item25	43.93	Sq.m
26	26	Providing polished granite slab of approved quality , size ,shape and thickness not less than 18mm on floors ,skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop 1:3 including cutting where necessary finished with flush pointing with Fix -A- Tile Choksey/Sika/Pedelite/Rouf/ white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (i) Normal QUALITY (i) With Fix -A-Tile (Chokseys/ Sika /Pedelite/ Rouf)	item26	106.24	Sq.m
27	27	Providing ANTISKID tiles of approved quality size, shape and thickness not less than 8 mm on floors , skirtings over cement mortar bed 15 mm thick in prop 1:3 with Fix -A- Tiles (Choksey/ Sika/ Pedilite/Rouf )/ White cement complete at all levels as specified and directed. Ceramic tiles. Normal Range(300x300)	item27	14.29	Sq.m
28	28	Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Marbonite/ Make ii) Of size 600mmx600mm and above	item28	207.64	Sq.m
29	29	Providing polished ceramic wall tiles of approved quality size, shape and thickness not less than 8 mm on walls and skirtings over cement mortar bed 10mm thick in prop 1:3 including cutting where necessary finished with flush pointing with Fix -A- Tiles (Choksey/ Sika/ Pedilite/Rouf )/ White cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. b) Executive range ( Sizes 200mm x300mm and above) e) Nitco made	item29	82.23	Sq.m
30	30	Providing and laying machine made clay roof tiles on sloping roof and chajjas over 20 mm thick base of cement mortar 1:3 and jointed with grey cement slurry and jointed with grey cement slurry and joints flush with mortar 1:3 complete	item30	187.29	Sq.m
31	31	Providing, Transporting to site, laying, fitting and fixing at all levels tiles for following purpose of SUNROCK-Hi-CTS tiles of high density cement concrete designer coloured tiles made of 100% pure white cement tested as per IS-1237-1980 of approved quality, size shape of thickness 5mm to 50mm to be ancored by adhesive cement and copper wire anchoring including cutting where necessary finished with flush pointing with polymer modified cementations tile joint filler of ROOF RAINBOW TILE MATE -140 white cement slurry mixed with approved pigment to match shade of tiles complete as specified and directed.	item31	75.9	Sq.m
32	32	Providing and applying over roof slab/ raft slab , two coats of water proofing slurry like Sika Top Seal 107 of Sika India Ltd. @ 1.5 kg per sq.mt per coat, by brush after proper surface preparation as specified & directed by the Department complete	item32	187.29	Sqm
33	33	Providing wood work in frames (chowkat) of doors, windows, clearstory windows and other similar works wrought, framed and fixed in position in contact with C.C. or brick masonry walls including supplying, fitting and fixing with nails, screws, bolts and nuts complete with M.S. plate hold fasts (4mm X 3mm X 250mm) as per design and embeded in cement concrete block in prop. 1:1:4 and with 2 coats of kiricide oiling to the timber faces in contact with C.C. and masonry as directed and specified. a) With 1st class timber ( Hollock / Bonsum )	item33	0.59	Cum
34	34	Providing and fixing flush door shutters solid core construction with frame of first class hard wood with cross bend and face veneered plywood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100X75X3.5mm) 6 nos. with necessary wood screws. a) Decorative type face panel and block board core . I) 40 mm thick	item34	12.65	Sqm
35	35	Providing fitting and fixing anodised aluminium sliding windows and ventilators of standard section without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles,angle cleat rubber gasket, roller, bolting device,locking arrangements,screws etc as required complete as specified and directed for all levels. b) 3 track sliding window . I) 5 mm glass	item35	62.72	Sqm
36	36	Providing, fitting and fixing Coloured anodised aluminuim framed glazed doors with aodised aluminium frame made of 100mm x 45mm x2.5mm section with door style of size 88mm x 45mm x 2.5 mm top rail 50mm x45mm x2mm lock rails 100mm x45mm x 2mm and bottom rails 100mm x45mm x2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot tower bolt in each leaf , aluminium door handle, lock angles, cleat etc complete as specified and directed by the department at all levels. i) 6mm clear glass	item36	6.17	Sqm
37	37	Providing, fitting and fixing Coloured anodised aluminuim framed glazed doors with aodised aluminium frame made of 100mm x 45mm x2.5mm section with door style of size 88mm x 45mm x 2.5 mm top rail 50mm x45mm x2mm lock rails 100mm x45mm x 2mm and bottom rails 100mm x45mm x2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot tower bolt in each leaf , aluminium door handle, lock angles, cleat etc complete as specified and directed by the department at all levels ii) 5mm frosted glass	item37	10	Sqm
38	38	Providing, fitting and fixing Coloured anodised aluminuim framed glazed doors with aodised aluminium frame made of 100mm x 45mm x2.5mm section with door style of size 88mm x 45mm x 2.5 mm top rail 50mm x45mm x2mm lock rails 100mm x45mm x 2mm and bottom rails 100mm x45mm x2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot tower bolt in each leaf , aluminium door handle, lock angles, cleat etc complete as specified and directed by the department at all levels iv) Nepal Board / Bhutan Board/ Prelaminated Board	item38	14.56	Sqm
39	39	Providing, fitting and fixing Coloured anodised aluminuim fixed windows and ventilators of standard sections , joints mitred welded fitted with 6mm thick glass panes and 12mm prelaminated boards and providing and fixing handles, angle cleat , rubber gasket, roller bolting device , screws as required complete as specified and directed for all levels.	item39	2.46	Sqm
40	40	Providing, fitting and fixing coloured anodised aluminium partion wall of standard sections, joints mitred and welded (manufactured to relevant I.S. specification ) and providing and fitting angle cleat, rubber gasket, bolting devices screws etc. at all levels. ii) 6mm clear glass	item40	71.28	Sqm
41	41	Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for RCC work / RB walling including straightening, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL	item41	269.93	Qtl
42	42	c) ISI approved M.S. Rod	item42	3.33	Qtl
43	43	Providing, fitting and fixing M.S. Grill of required pattern for winddows / clearstory windows / openings with M.S. flats at required spacing and farmed alround square or round M.S. bars with round headed bolts and nuts or screws. a) Ornamental Grill c) Fixed to brickwork/ P.C.C/R.C.C.	item43	3038.51	Kg
44	44	Providing, fitting and fixing in position collapsible ms shutters with vertical channels 20 mm x 10 mm x 2mm braced with flat iron diagonals 200 x 5 mm size with top and bottom rails of T - iron 40mm x40mm x6mm with 38 mm dia steel pulleys complete with locking arrangment, handles including priming coat with red lead primer	item44	46.75	Sqm
45	45	Applying primary coat over new steel and other metal surfaces upto 100 mm in width or grith after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wood scrappers and sand paper. a) With ready mixed red lead red oxide primer	item45	444.8	Sqm
46	46	Painting two coats ( excluding priming coat ) on new steel and other metal surfaces with enamel paint of approved brand and manufacture( Asian paint/Berger paint/ICI paint/ J &Npaint/Nerolac to give an even shade including cleaning the surface of all dirt, dust and other foreign matter . (I) Surfaces over 100 mm in width or girth b) High gloss ( Asian paint/ Berger paint/ ICI paint / J& N paint / Nerolac)	item46	444.8	Sqm
47	47	Applying priming coat over new wood based surfaces over 10 cm in width/grith after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. a) With ready mixed paint, wood primer ( white).	item47	39.85	Sqm
48	48	Painting two coats ( excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of ditrt, dust and other foreign material , sand papering and stopping. (I) Surfaces over 100 mm in width or girth a) High gloss (Asian Paint/ Berger Paint /ICI paint/Nerolac	item48	39.85	Sqm
49	49	Providing two coats of acrylic water based wall putty/ wall filter of Asian Paints/ Berger/Dulux (ICI)/ Nerolac over concrete/cement plaster/ brick walls ( internal )and after removing all the loosely adhering material from the wall/ceiling surface with the help of emerey stone ,putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.	item49	1833.64	Sqm
50	50	Applying one coat of distemper primer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar drops and other foreign matter and including preparing the surface even and sand papered smooth.	item50	1833.64	Sqm
51	51	Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/Berger paint/ ICI Paint/ J& N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar dropping and other foreign matter and sand papered smooth. (a) Plastic Emulsion paint of approved brand and manufacture ( Asian paint/Berger paint/ICI paint/ J & N paint/ Nerolac)	item51	491.93	Sqm
52	52	Extra over item no 13.4.7 above for painting with Plastic emulsion paint of approved brand and manufacture (Asian paint/Berger paint/ ICI Paint/ J& N paint/ Nerolac) on ceiling & sloping roof. (a) Plastic Emulsion paint of approved brand and manufacture ( Asian paint/Berger paint/ICI paint/ J & N paint/ Nerolac)	item52	491.93	Sqm
53	53	Providing one coat of cement primer( on ext. wall) of approved brand and manufacture on new surfaces after thoroughly brooming the surface preparing the surface even and sand papered smooth.	item53	430.71	Sqm
54	54	Finishing old /new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish , finish of Sandex Matt brand of Snowcem India Ltd. Of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels ( two coats)	item54	430.71	Sqm
55	55	Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.	item55	263.38	Sqm
56	56	Providing plinth protection with bricks laid on edge and grouted with cement mortar 1:4 including finishing with cement painting in prop. 1:1 complete	item56	109.23	Sqm
57	57	Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.	item57	75	Rm
58	58	Providing ,fitting and fixing Godrej SS 304 grade railing with pipes/glass for diferent staircase, cutous areas, balcony etc with complete installation, Acrylic finish, etc which is fitted with mid pipes and top pipes of good quality steel. Moreover, depending on the requirement glass panels can also be fitted on specific railing. Good quality screws are provided for fixing up the railings.	item58	480	Kg
59	59	Providing and fixing 12mm thick and 150mm wide pelmet with 25mm dia wooden curtain rod and bracket including fixing with 15mm x3mm M.S. Flat 100mm long plugs complete .a) First clas Indian Teak wood/Sisu wood	item59	40	Sqm
60	60	Supplying, fitting and fixing MAC blinds horizontal and verticale complete as specified and directed by the department at all levels. (a) Vertical blinds Regular, 100 mm	item60	30	Sqm
61	61	Providing, fabrication and fixing of structural glazing made out of Coloured Anodised aluminium mother frame (INDAL 9303) and subframe (INDAL 9406 ) and 5 mm reflective glass of approved shade. The glass to be pasted using structural selicon (DC995) and weatherseal silicon to be used (DC 789), the structure complete with all accessories as and where necessary .	item61	34.11	Sqm
62	62	SANITARY WORKS : Supplying, fitting and fixing white vitreous water closet squatting pan (Indian type W.C.Orissa pattern W.C.) of size 580x 440mm with 100mm SCI \"P\" or \"S\" trap, 10 liter low level PVC flushing cistern of matching colour with manually controlled device (handle lever) of Parryware/Hindware/Cera make with all fittings and fixtures complete including cutting and making good the walls and floors whereever required. a) White	item62	3	Each
63	63	Providing and fixing vitreous china flat back type lipped front urinal basin of size (455x360x267) mm of Parryware/Cera make with automatic flushing cistern of similar colour and standard flush pipe and CP brass spreader with brass unions, etc. complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. (a) White. I) For 1 No. urinal basin with 5 ltr Flushing cistern	item63	1	Each
64	64	Providing and fixing vitreous china squatting plate of size 450mm x350mm with automatic flushing cistern of similar colour and an integral longitudinal flushing pipe of Parryware /Chera make with standard size PVC flush pipe for back and front flush with standard spreader pipes with fittings G.I. clamps etc. complete including painting of fittings and brackets cutting and making good the walls and floors wherever required. a) White i) For one squatting plate	item64	1	Each
65	65	Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) (iv) Cascade NXT 550 x 440 with long Pedestal (Cat. No.C0404/C0380)	item65	3	Each
66	66	Providing fitting and fixing decorative mirror of Agmeco make colour CP frame complete as directed and specified. (a) Size 800mm x 600mm	item66	3	Each
67	67	Providing fitting and fixing towel rail of Sona make complete as directed and specified . (iv) Queen's (450mm long) (Cat.No.AQN-7711A)	item67	3	each
68	68	Providing, fitting and fixing recessed soap tray of Hindware make complete as specified and directed. (a) Parryware Make (ii) Wall Soap tray (Cat. No.C9951)	item68	3	Each
69	69	Supplying fiting and fixing PVC pipes of 6 Kgf/sq cm( Supreme/Prince) or other ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels including G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia	item69	75	Rm
70	70	b) Concealed by chiselling or breaking brick wall/ C.C./ R.C.C and making good to the damages. (ii) 110mm dia	item70	30	Rm
71	71	Supplying fiting and fixing 87.5 degree PVC bend of (Supreme /Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches ii) 110 mm dia.	item71	25	each
72	72	Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme /Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches ii) 110 mm dia.	item72	20	Each
73	73	b) Concealed by chiselling or breaking brick wall / CC / RCC and making good to the damages. ii) 110 mm dia.	item73	12	each
74	74	Supplying fiting and fixing PVC plain single tee of (Supreme /Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches ii) 110 mm dia.	item74	15	each
75	75	b) Concealed by chiselling or breaking brick wall / CC / RCC and making good to the damages. ii) 110 mm dia.	item75	7	each
76	76	Providing fitting and fixing 100 mm dia PVC Cowel with ISI make complete as directed and specified.	item76	10	each
77	77	Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. b) 100 mm dia	item77	15	each
78	78	Providing fitting and fixing 450mm dia 90mm thick C.I. Man hole cover and frame of 38 kg Weight complete as directed and specified	item78	4	each
79	79	Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/ Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed ( sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table	item79	5.65	Cum
80	80	Construction of Inspection pit inside measurement 450 mm 450mmx 450mm flush with 100 mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling ,12 cm brick wall in cement morter in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor, 450mm x 450mm air tight C.I. inspection pit cover and frame complete including supplying of materiasls, necessary excavation of pit as directed.	item80	3	Each
81	81	WATER SUPPLY WORKS : Providing and fixing S.F.M.C. Brand 3 layer ( Outer green coloured UV Stabilised, middle black coloured UV Stabilised and inermost layer white coloured with antimicrobial property) Fusion welded PP-R ( Poly propylene - random copolymer ) Pipes , ADR 7.4 having thermal stability for hot and cold water supply including all plain PP-R fittings and brass trreaded PP-R fitting and clamping, cutting and making good to the damages. I) In exposed surfaces or in trenches. a) PN -16 Pipe, 16mm OD, SDR-7.4	item81	84	Rm
82	82	c) PN -16 Pipe, 25mm OD, SDR-7.4	item82	76	Rm
83	83	II) Concealed by chiselling or breaking brick wall /CC/ RCC and making good to the damages. a) PN -16 Pipe, 16mm OD, SDR-7.4	item83	84	Rm
84	84	c) PN -16 Pipe, 25mm OD, SDR-7.4	item84	76	Rm
85	85	Supplying fitting and fixing C.P.bib cock 15 mm dia of approved brand directed and specified ( G.I. & C.P pipes will be measured separately) II) Jaquar make a) Continental/ Clarion. I) Standard	item85	10	Each
86	86	Supplying fitting and fixing Chrome plated (C.P.) stop -cock of approved brand and size as mentioned below as directed and specified ( G.I. & C.P. pipes will be measured and paid separately) I) Jaquar (a) Continental /Clarion (ii) 15 mm dia ( Angular stop cock)	item86	8	Each
87	87	Supplying and fitting fixing C.P. pillar cock of 15 mm dia of approved brand as specified and directed. ii) Jaquar make a) Continental /Clarion -pillasr cock with areator	item87	4	Each
88	88	Supplying fitting and fixing Chroma Plated (CP) sink cock of approved brand as directed and specified Jaquar brand a) Continental/ Clarion i)Sink cock with swinging casted spout	item88	2	Each
89	89	Supplying and fitting gun metal country pit valve ( full way valve) I.S.I Make as specified and directed. b) 40 mm dia	item89	2	Each
90	90	Supplying fitting and fixing gun metal check valve include necessary threads to pipes. b) 40 mm dia( Heavy Type)	item90	2	Each
91	91	Supplying fitting and placing plastic cylindrical vertical closed top ( PCVC) tank of Sintex/ Polycon/ Patton make over the stagging with manhole cover with locking arrangement and cleaning arrangement including providing pads of sizes as required for inlet and outlet piped complete as directed with labour charge. ( III) 1000 litre (a) Sintex make	item91	1	Each
92	92	Deep tubewell : Preparation of site for placement of the drilling Rig including excavation of mud, circulation , drain, collection chamber etc all complete as directed.	item92	1	each
93	93	Transportation of all ancillary equipments, camp materials , welding set and rig accessories etc, including cost of POL all complete as directed i) Less than 100 Km	item93	70	km
94	94	Transportation of all store materials like pipes, strainer , cone socket clamp, bentonite etc including cost of POL all complete as directed .i) Less than 100 Km	item94	70	km
95	95	Transportation of air compressor with all accessories including cost of POL all complete as directed. i) Less than 100 Km	item95	70	km
96	96	Construction of temporary accommodation and low cost sanitary facility for drilling staf including cost of sanitary facilites for drilling staf including cost of camp materials , tables chair, utensils , dresses , safety helmets etc and dismantling the accommodation after completion of works.	item96	1	each
97	97	Providing water supply facilities at drilling sites all complete as directed.I) By installing 1no Singur Hand Pump.	item97	1	each
98	98	Boring in soft soil/normal clay/ sandy soil by bit of size either 5 5/8\" or 6 7/8\" or 7 7/8\" and collecting sample of soil at every 3.0m depth or wherever there is a change of strata in sample boxes with the distinguishing marks including arranging and carriage of necesary boring materials/ tools/ bentonite etc and withdrawing the pipe for lowering well assembly etc all complete as directed.	item98	120	R.MT
99	99	Re- boring in soft soil/ normal clay/sandy soil by bit of size either 8 1/2\" or 9 5/8\" or 12\" from either 5 5/8\" or 6 7/8\" or 7 7/8\" all complete as directed	item99	120	R.MT
100	100	Extraction of drilling pipes/ bits against skin friction at the end of each day and after completiion of operation including washing of the bore holes all complete..	item100	120	R.MT
101	101	Lowering sinking of well asembly including welding of pipe joints for 100 mm dia GI /MS casing pipe, stainer all complete as directrd.	item101	120	R.MT
102	102	Developing of the DTW with air compressor make Kirloskar /cumins all complete as directed.	item102	48	hour
103	103	Supplying and packing pea gravel around periphery of casing including screening washing etc all complete as directed.	item103	5.17	CUM
104	104	Supplying fitting and fixing MS clamp of sizes 15mm thick and 150 mm wide having projection of 30 mm and three holes of 20mm dia for clamping the plates by 16mm dia hexagon bolts of length 75mm and nuts on both sides encircling the column pipe for 150 mm dia including painting .	item104	1	set
105	105	Supply of UPVC end cap 160mm dia	item105	1	each
106	106	Supplying, fitting and fixing suction pipes ( plain/ bevel ended) , conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casting pipes complete as directed ( I) G.I. Pipe (a) TATA/SAIL (medium)( sockets should be welded to the pipes) iV)50 mm diameter	item106	56	R.M
107	107	Supplying, fitting and fixing pipes plain/ bevel ended for casing , conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the casting pipes complete as directed A) TATA / SAIL (Medium) iii)100 mm diameter	item107	110	R.M
108	108	Supplying, fitting and fixing brass Tez filter 2.00 meter long.	item108	5	each
109	109	Int. Electrification: Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete b)Medium point upto 6.00mtr length	item109	28	Each
110	110	c)Long point upto 10.00mtr length	item110	16	Each
111	111	Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Medium point up to 6.00 metre. Length.	item111	13	Each
112	112	Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Extra long point upto 25.00mtr length\n	item112	4	Each
113	113	Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. a) With 2x2.5sqmm +earth continuity with 1x2.5sqmm PVC insulated unsheathed single core copper conductor cable with 19mm dia 2.00 mm thick rigid PVC conduit pipes.	item113	454	Rm
114	114	b)with 2x4sqmm+ earth continuity with 1x2.5sqmm PVC insulated unsheathed single core copper conductor cable with 19mm dia rigid PVC conduits.	item114	240	Rm
115	115	Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 12way SPN Double door	item115	6	Each
116	116	Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 6way TPN ( 4+18)	item116	5	Each
117	117	Supplying with fittingand fixing single pole 10KA 240/ 415V 50HZ MCB of the following capacity complete with necessary connection as specified and directed by the deptt. B. Series 6 to 32 A	item117	12	Each
118	118	Supplying with fitting and fixing SPN 10KA 240V /415 V 50 HZ MCB of the following capacity complete with necessary connection as specified and directed by the deptt. b) 63A	item118	10	Each
119	119	Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 100 A	item119	1	Each
120	120	Supplying including fitting and fixing of high speed AC Ceiling fan complete with all accessories like , down rod, canopy etc.of following sweeps with making necessary connection etc.as reqd complete and directed by the deptt.(Without regulator) Premium model 1400 mm Sweep. (ORIENT PSPO make) /Premium model 1400 mm Sweep SS-390 Deco. Havells make)	item120	15	Each
121	121	Installation ,testing and commissioning of ceiling fan including the regulator, down rod of standard size(up to 300mm length) and connection etc complete as specified and directed by the department.	item121	15	Each
122	122	Supplying including fitting fixing of AC Exhaust fan in the existing hole on the wall of following sweeps and making necessary connection etc.as reqd complete ans as directed by the deptt. Heavy Duty 450 mm sweep 900 RPM Single phase (ORIENT make)	item122	4	Each
123	123	Supplying and fixing Call bell(Buzer) including 5 Amps capacity flush type bell push switch including connections as required complete .	item123	6	Each
124	124	Supplying fitting and fixing of single wall brackets model 37712 (or equivalent as approved by the Deptt.) on the wall in GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover with all accessories including connection as required complete. Without lamp.	item124	15	Each
125	125	Supplying installation, testing and commissioning of the following prewired CFL/ Fluorescent luminaires complete with all accessories such as ballast starter etc. directly on wall/ ceiling including connection with 1.5sqmm PVC insulated single core copper conductor as reqd and as directed by the deptt. Striplite luminaries complete with VPIT copper ballast/ Electronic ballast and decorative end cap and 1 X 36 / 40 watt Fluorescent tube.(Crompton Greaves make) Model- DSG1114LDB CROMGOLD / DSG1114LDBN CROM GOLD NEW / DSG1314EB CG GOLD / DSG 1414EB PLANET GOLD with Super Saver / Super Brite Lamp. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make.	item125	29	Each
126	126	WVF 53414 SGW 4 x 14 W FTL T5) Recess mounted indirect- direct luminaries with High Efficiency Translucence (HET) Technology suitable for FTL T5) Lamps. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent PHILIPS/ JAQUAR make).	item126	5	Each
127	127	Single phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar suitable for 100 mm bore well and above. 2 HP STAGE 6 to 30 with control panel.	item127	1	Each
128	128	.Supplying and laying of following size PVC/ XLPE insulated and PVC sheathed 11kv grade alluminium conductor LT armoured UG cable laid in ground / partially in air ( 10% of cable length) including excavation of cable trench upto depth of 75cm, refilling, protective brick covering, sand cushioning etc.complete handling of surplus spoil, debriesetc.to proper place as specified and directed by the deptt. 32.1.3.6 120.00sqmm 2, 3 & 1/2 core UG cable	item128	45	Rm
129	129	Installation of Earth station with 40mm dia . And 4.50 metre long G.I. pipe with necessary G.I. reducing socket 40 mm x20mm size locking arrangement with h' inged cover plate, funnel, G.I. nuts, through bolts etc. for putting pipe and re-fitting with necessary enclosure on the top etc. as required complete.	item129	4	Each
130	130	Extra for using salt (5 kg) and Charcoal (64 kg for pipe earth electrode as required.	item130	4	Each
131	131	Supplying and laying 8 S.W.G. Copper wire at 0.50 metre below ground level for conductor earth electrodes including soldering, excavation work and refilling etc. as required complete.	item131	150	Rm
132	132	Do with 6 S.W.G.GI Earth Wire	item132	175	Rm
133	133	Providing and fixing 25mm x4mm Copper Strip on surface or recessed fitted with necessary Copper Saddles including connection etc complete .	item133	24	Rm
134	134	Supply, fitting & fixing of Lighting Finial Arrestor made of 25 mm dia 300 mm long solid Copper tube having 85 mm dia. single prong at top and 3 mm thick base plate at bottom complete with fitting & fixing with Brass nuts & bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt.	item134	2	Each
135	135	Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt.	item135	50	Each
136	136	Supplying and fitting fixing of Electric storage water heater [Geyser] of Bajaj/Crompton/Racold/V. Guard or equivalent make including necessary connection cable, as approved by the Deptt.)etc. as required complete and as directed by the Department. (iv) 25.00 litres. Capacity (5 Star Model) (Crompton/Racold/V. Guard or equivalent make)	item136	1	Each
137	137	Supplying including installation, testing and commissioning of Readymade Panel board conforms to IS : 8623, IEC : 60439 made of Phosphatised powder painted wall mounting type complete with Ana log meter module cable Alley both LHS and RHS, Copper Bus bar, Din Rail, Neutral Bar, Earth Bar etc. with Provision for 1 No. 4 pole MCCB as incomer and provision for 6 Nos. FP MCCB out goings as specified and directed by the deptt. and comprising of the following electrical items: 1. Panel Board up to 250 A Incomer, O/G FP MCCBs. 2. Meter Module- Digital (Provision for Ammeter, Voltmeter, Selector Switch, Control Fuses, Indicating lights, MCBs etc. 3. cable Alley 6 Way for incoming 250A (Incoming and Outgoing MCCB of reqd. rating will be measured and paid separately)	item137	1	Each
138	138	5 KVA On-Line UPS System (Orion or equivalent make as approved by the Deptt.) with PWM-IGBT technology\n230V AC Input (160V – 280V A 1 Ph input- 1 Ph output\nWith Isolation Transformer\n4KW output with 0.8 output PF\n120 min backup using SMF battery	item138	1	Each
139	139	ASEB Load Security ( Meter & other)	item139	1	Job
140	140	External Electrification : Supplying and installation and commissioning of vermin and dust proof totally enclosed double cubical type compartmental floor mounting panel board of size 1.20m x1.00m x0.50m made of 16SWG (1.6 MM) thick CR Sheet and 35mm x 35mm x6 mm size angle and 35mm x 6 mm flat iron having 4 Nos legs at the bottom and GI Sheet roofing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint . The panel board is to be erected in 1:3:6 RCC pole foundation including exacavation of trench and brick soling etc. Complete neatly internal wiring done as specified and directed by the department comprising of the following electrical items. 1. 40 Amp 4 pole 415 Volt 50 Hz MCCB As incomer -1 no2. 32 Amp 2 pole open execution with HBC fuse switch dis-connector fuse unit as outgoing -3 nos3.25 mm x 5mm size -4 strip copper Bus - Bar -1 set.4. 0-40 Amp Electro - mechanical counter display 3 Phase 4 wire electronic hybrid energy meter -1 No 5. 40 AMP 4 pole On-Off power contactor -1	item140	1	Each
141	141	Pole Type BOP or equivalent-7030 Height 7m The materials of the pole as follows : Conforming to grade S355JO Conforming to grade S355JO , Base Plate Fe 410 Conforming to IS 226/ IS 2062, Foundation Bolts:- 6.8 Gr. As per IS 1367, Pole Sections :- The Octagonal Poles shall be in single piece with single longitudinal welding join, Galvanization :- The poles shall be hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 65 micron. The galvanizing shall be done in single dipping. Door opening :- The Octagonal poles shall have door of approximate 500 mm length at the elevation of 500 mm from the base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connection as approved by the Depts.. The door shall be flush with the exterior surface and shall have suitable locking arrangement. The pole shall be adequately strengthened at the location of the door compensate for the loss in section. There shall also be suitable arrangement for the purpose of earthing, Smart pack Junction box with 6 MCB & Terminals for mounting inside base compartment of Pole. Top Dia. (A/ 70mm Bottom Dia. (A/ 130mm , Sheet Thickness 3mm , Base Plate dimensions :- (L x B x 220 x 220 x 12, Foundation Bolt , Bolt Size :- (no. x dia.) 4 x 20 Dia, Pitch Circle Dia. (PC 205 Bolt Length 750, Projected Bolt Length 100mm, Anchor plate thickness:- 4 mm , Pole Foundation :- The octagonal poles shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. Foundation:- The foundation shall be done with ( Earth work:- 2.04 cubic Meters.RCC :- 1:1.5 : 3 proportion 0.65 cubic metres. Steel :- 22.43 Kg. Shuttering :- 4.32 square metres. = 22.43 Kg.	item141	2	Each
142	142	Supplying with fitting & fixing of the following integral type street light luminaries complete and consisting of single piece integral epoxy gray powder coated dia cast aluminium housing gasket, pot optic reflector, cast aluminium frame from heat resistance toughened clear glass cover and accessories such as Condenser, lamp Holder, Ballast, lamp etc. in the existing pole including making necessary connection as approved by the Deptt.)with 2× 2.50 sq.mm F.R. multistrand and P.V.C. insulated single core copper cable as specified and directed by the department. Philips make) Cat No.SRX086 1xSON150W For Lamp 1xSON/SONT150W/ / Havells make): LHYW00115099 For lamp 1x150W SON-T.	item142	2	Each
143	143	Supplying including fitting and fixing of Hot Dip galvanised arm bracket for installation of luminaries. \n Header with top cap 300 mm long pipe of thickness 3 with arrangement to fix on pole top with 3 Nos. of bolts. \ni Armed of required length size 48.3mm out side dia x 3.25mm thick (BAJAJ/ PHILIPS/ VALMONT/ PARUTHI ENGR/Nezone make) Single arm bracket 1000mm long for 3m to 10 metre. Poles.\n Stiffener plate from arm of the following types :	item143	2	Each
144	144	FIRE FIGHTENING Supplying, installing , fixing of dry chemical powder fire extinguisher conforming to IS: 2171 with ISI mark and CO2 cartridge will be conforming to IS : 4947 with IS: 4308 with ISI mark , Powder will be confirming to IS: 4308 with ISI Mark(10 Kg) BRAND: FIRESTOP/FIREND/ FIRE SHIELD/GETECH/MINMEX	item144	8	Each
145	145	LANDSCAPING Supplying and dibbing of selected lawn grass{ Doob grass(Cynodon dactylon) carpet grass (Axonopus affinins)} after preparing the land by ploughing/ working to a depth of 40-45 cm, removing of all unwanted debrises (rubbles, pebbles, plant, root etc.) , mixing of organic manure (10 kg-15kg /sq.mt) levelling the surface and initial maintenance by proper and periodic rolling, mowing and irrigation etc. (as specified) for a period of six months from the date of dibbing including the application of recommended doses of fertilizers (N:P:K) mixture as specified and directed by the department. a) By Doob Grass( Cynodon dactylon)	item145	20	sq.mt
146	146	b) By Carpet grass (Axonopus affinis)	item146	25	sq.mt
147	147	Supplying and planting of plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand , cow-dung, leaf mould, fertilizer , pesticides as per specification and necessary maintenance for a period of 4 month from the date of planting complete as specified and directed. ( Mixing of different ingredients of soil media to be made in presence of Deptt. Official/ Specialist concerned) ( A) With Bottle palm. I) Using earthen pot of 60cm dia	item147	20	each
148	148	( B) With Erica palm ( Butterfly palm)/ Ketia palm. I) Using earthen pot of 60cm dia	item148	20	each
149	149	( D) With Fan palm / Finger Palm. II) Using earthen pot of 60cm dia	item149	20	each
150	150	Edge Planting / Internal Hedge Supplying and planting of suitable plant materials for edge making (20cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per spefication and necessary maintenance for a period of one year from the date of planting complete as specified and directed. ( A) Adopting Single Row Planting Method ( I) With Duranta	item150	25	R.MT
151	151	(ii) With Brindavan / Latifolius/ Coleus	item151	20	R.MT
152	152	SHRUB PLANTINGSupplying and plantting of ornamental shrub (plant saplling height 1'-0\") including pit making (60 cm x 60cmx60cm) , filling the pit with appropriate soil media , manure and fertilizers and necessary maintenance for a period of one year from the date of planting complete as specified and directed B) Bougainvillea	item152	12	each
153	153	C)/ Thuja	item153	15	each
154	154	Providing polished GEMS CONCRETE tiles of approved quality, size, shape of specified thickness on pavers over a base of 100mm compacted sand gravel including cutting where necessary finished with flush pointing with Fix -A- Tile(Choksey/Sika/ Pedelite/ Rouf/ white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed .(Cement plastering to be measured and paid separately) (Coloured pigment should be in conormity with colour of tiles and as approved and directed by the Department ).( Walls means both interior and exterior walls)(a) 60mm thick	item154	120	SQ.M.
155	155	(A) Supplying and filling sand gravel in foundation trencehes of column footings over slushy soil including local carriage of materials within 8 km pumping out of water , ramming etc. complete for strengthening the bearing capacity of the soil as directed and specified including payment of forest royalty and sales tax and other duties and taxes as may be necessary.	item155	12	CUM
156	156	Boundary wall : Earth work in excavation for foundation trenches of walls, retain -ing walls, footings of columns, steps, septic tanks etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all leads and lifts as directed and specified in following classification of soils including bailing out water where necessary as directed and specified. I) Upto a depth of 2m below the existing ground level . a) In ordinary soil	item156	86.4	CU.M.
157	157	Plain cement concrete work with coarse aggregate of sizes 13mm to 32mm in foundation bed for footings, steps, walls, brick work etc. as directed and specifoed including dewatering if be measured and paid separately) a) In Prop. 1 cement : 3 Sand : 6 Coarse agg. by volume	item157	3.7	CU.M.
158	158	Providing and laying plain/reinforced cement concrete work with coarse sand & 20 mm down graded stone aggregate including dewatering if necessary and curing complete supply of materials but excluding cost of form work and reinfircement ( form work and rein-forcement will be measured and paid separately ) Using mixture machine i) In sub-structure upto plinth level. I) Foundations, footings, columns with base tie and plinth beam, grade beam ,pile cap ,base slab, retaining wall, walls of septic tank, inspection pit and the like and other works not less than 100mm thick upto plinth level. b) M 15 or Prop 1:2:4	item158	30.8	CU.M.
159	159	ii) In super structure from plinth level. b) Columns, pillars, posts, struts, suspanded floor, roof, landing, shelf and support, balcony, lintel,sill band , beam, girder, cantilever,staircase including preparing of top surface and finishing of nosing. b) M15 or Prop 1:2:4	item159	12.5	CU.M.
160	160	Providing brick soling in foundation and under floor with stone/ best quality picked jhama bricks, sand packed and laid to level and in panels after preparing the surface as directed including all labour and materials and if necessary dewatering complete . a) Brick on flat soling	item160	83.52	SQ.M.
161	161	Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary and curing complete as directed in sub structure upto plinth level. a) In prop 1:4	item161	17.1	CU.M.
162	162	112 mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in in super structuer above plinth upto first floor level (protruding M.S. rod / Tor steel of column to be embeded in cement morter and will be measured and paid separately) a) In cement morter in proportion 1:4	item162	156.8	SQ.M.
163	163	Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. hight of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for insitu reinforced cement concrete and plain concrete work in	item163	783	Sqm
164	164	15 mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arrises and/or rounded angles not exceeding 80 mm in girth and finished even and smooth including curing complete as directed a) In cement mortar 1:4	item164	136.8	SQ.M.
165	165	15 mm thk. cement plaster in single coat on fair side of brick/ concrete wall for interior plastering upto 1st floor level including arrises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80 mm in grith and finished even and smooth including curing complete as directed. a) In cement mortar 1:4	item165	136.8	SQ.M.
166	166	Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for RCC work / RB walling including straightening, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete ( upto first floor level ) b)ISI approved super ductile TMT Bar i) TATA/SAIL	item166	47.37	QNTL
167	167	Providing, fitting and fixing M.S. Grill of required pattern for winddows / clearstory windows / openings with M.S. flats at required spacing and farmed alround square or round M.S. bars with round headed bolts and nuts or screws. a) Ornamental Grillc) Fixed to brickwork/ P.C.C/R.C.C.	item167	1064	Kg
168	168	b) Supplying, fitting and fixing double leaf heavy duty iron gate , frame made from 50 m.m.x 6m.m. M.S.flat iron with another , frame made from 50 m.m.x 6m.m. M.S.flat iron with another, frame made from 50 m.m.x 6m.m. M.S.flat iron with another, frame made from 50 m.m.x 6m.m. M.S.flat iron with anotherhorizontal flat at the middle, 20 m.m. dia M.S.bars at 200 m.m.apart from bottom flat to the middle flat including drilling,weldingapart from bottom flat to the middle flat including drilling,welding etc complete. All vertical bars are to be protruded at least 100 m.m . above the middle and top flat is to be flattened and pointed as directed. Necessary locking arrangement on both faces, arangement for temporary closing the gate and 2 nos strong iron hinge of M.S.bars and flat of same size on each leaf to be embedded in C.C.brick pillars as necessary including a red oxide painting to all iron works as directed and specified.	item168	9.58	Qtl
169	169	Applying primary coat over new steel and other metal surfaces upto 100 mm in width or grith after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wood scrappers and sand paper. a) With ready mixed red lead red oxide primer	item169	136.8	SQ.M.
170	170	Painting two coats ( excluding priming coat ) on new steel and other metal surfaces with enamel paint of approved brand and manufacture( Asian paint/Berger paint/ICI paint/ J &Npaint/Nerolac to give an even shade including cleaning the surface of all dirt, dust and other foreign matter . (I) Surfaces over 100 mm in width or girth b) High gloss ( Asian paint/ Berger paint/ ICI paint / J& N paint / Nerolac)	item170	136.8	SQ.M.
171	171	Providing one coat of cement primer( on ext. wall) of approved brand and manufacture on new surfaces after thoroughly brooming the surface preparing the surface even and sand papered smooth.	item171	273.6	SQ.M.
172	172	Finishing old /new wall with water proofing weather coat smooth anti-fungal premium textured exterior finish , finish of Sandex Matt brand of Snowcem India Ltd. Of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels ( two coats)	item172	273.6	SQ.M.
173	173	DRAIN & R.C.C. BOX CULVERT: Plain cement concrete work with coarse aggregate of sizes 13mm to 32mm in foundation bed for footings, steps, walls, brick work etc. as directed and specifoed including dewatering if necessary ,and curing (shuttering where necessary shall be measured and paid separately) a) In Prop. 1 cement : 3 Sand : 6 Coarse agg. by volume	item173	0.7	CU.M.
174	174	Providing and laying plain/reinforced cement concrete work with coarse sand & 20 mm down graded stone aggregate including dewatering if necessary and curing complete supply of materials but excluding cost of form work and reinfircement ( form work and rein-forcement will be measured and paid separately ) Using mixture machine i) In sub-structure upto plinth level. I) Foundations, footings, columns with base tie and plinth beam, grade beam ,pile cap ,base slab, retaining wall, walls of septic tank, inspection pit and the like and other works not less than 100mm thick upto plinth level. b) M 20 or Prop 1:1.5:3	item174	3.76	CU.M.
175	175	Providing brick soling in foundation and under floor with stone/ best quality picked jhama bricks, sand packed and laid to level and in panels after preparing the surface as directed including all labour and materials and if necessary dewatering complete . a) Brick on flat soling	item175	13.8	SQ.M.
176	176	Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary and curing complete as directed in sub structure upto plinth level. a) In prop 1:4	item176	1.26	CU.M.
177	177	Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for RCC work / RB walling including straightening, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete ( upto first floor level ) b)ISI approved super ductile TMT Bar ii) Other ISI marked	item177	6.49	QNTL
178	178	Providing drain with brick work in cement mortar in prop. 1:5 with half brick thick side walls and 10 cm thick C.C. ( 1:3:6 ) base over one brick flat soling including 15mm thick cement plaster in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary earth work in excavation of foundation trenches and refilling the sites after completion of work as specified a) 300 mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm.	item178	76	RM.
179	179	FURNITURE :- ADCI TABLE Model: HT 531 Main Table Size: 1600W x 750D x 780H MM , Side Unit Size: 905W x 440D x 650H MM Make: Featherlite	item179	1	Each
180	180	AIO/AM/SI TABLE Model: V-MT 1575 Size: 1500 W x 750 D x 750ht Specification TABLE TOP- 25mm Thick Pre-Laminated Particle Board(PLPB) finished. --------------------------- Handle: All recessed. Make: Featherlite	item180	1	Each
181	181	EO / HA'S TABLE Model: V-MT 1575 Size: 1500 W x 750 D x 750ht . Specification: TABLE TOP- 25mm Thick Pre-Laminated Particle Board(PLPB) finished --------------------- Handle: All recessed. Make: Featherlite	item181	5	Each
182	182	JR ASSISTANT TABLES Model: V-MT 1275 Size: 1200 W x 750 D x 750ht Specification:TABLE TOP- 25mm Thick Pre-Laminated Particle Board(PLPB) finished ------------------------- Handle: All recessed. Make: Featherlite	item182	7	Each
183	183	CONFERENCE TABLE SIZE: 5400 x 1500 x 750 ht Specifications: Table top - 25mm thick Pre-laminated particle board finished with 2mm -------------- aluminium flip up for switch access. Make:Featherlite	item183	1	Each
184	184	STORAGE FULL HEIGHT STORAGE Model: FST: 900180 Size: 900 Wx 450D x 1800 HT Specification: The structure is made out of 18mm Thick Pre-Laminated Particle Board ------------------- necessary hardware are provided. Make:Featherlite	item184	9	Each
185	185	STORAGE Model: Versaline Storage Unit, VS 90120: Specification : The structure is made out of 18mm Thick Pre-Laminated Particle Board ----------------------- Handle: All recessed. Make:Featherlite	item185	2	Each
186	186	ADCI'S CHAIR MODEL:LIBERATE HB Base: The 640mm dia (26 inches) five pronged base ………………… ………………………………. upholstered with approved fabric Make: Featherlite	item186	1	Each
187	187	ADCI VISITOR'S CHAIR. Model: Astro VA Frame: The frame is made out of 25.4mm tube of …………………………….. Frames Fabric: Seat are duly upholstered with approved fabric Make:Featherlite	item187	6	Each
188	188	AIO/AM/SI's CHAIR Model: Opus HB A-FUR-CHR-M-01 High back revolving chair ------------------------------ Overall Ergonomic design for office use. Make:Featherlite	item188	1	Each
189	189	EO/HA/Sr. Asstt.'S CHAIR Model: Astro MB, Base: The 640mm dia (26 inches) five pronged base is made --------------------- Fabric: Seat are duly upholstered with approved fabric . Make:Featherlite	item189	5	Each
190	190	Jr. Asstt.'S CHAIR, Model: Smart MB Fixed Arms, Base: The 640mm dia (26 inches) five pronged base is made out ----------- Fabric: Seat are duly upholstered with approved fabric. Make:Featherlite	item190	4	Each
191	191	VISITOR'S CHAIR, Model: Smart VA, Legs:Powdercaoted 4 Legs ------------- Fabric: Seat are duly upholstered with approved fabric. Make:Featherlite	item191	45	Each
192	192	SOFA, Model: S 900 1S (Converse), Single Seater Sofa, Base: Stainless steel ------------------- SOFA DEPTH: : 780 mm. Make:Featherlite	item192	4	Each
193	193	CENTER TABLE, MODEL: 610-FL CENTER TABLE Rectangular Table no. each Glass top Chrome frame Size: 1200 x 600 mm Make: Featherlite	item193	1	Each
194	194	Providing Glow sign board of size 3.00 x 0.90 M	item194	1	Each
195	195	Cost of foundation stone and Inaguration Ceremonial. (estimated cost Rs. 5,00,000.00)	item195	2	Job

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Assam Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Rcc Building ( G Plus 1 ) For Office Of The Asstt Director Of Industries And Commerce Rangia Dis Kamrup, Rangia Kamrup (Rural)-Assam

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Rcc Building ( G Plus 1 ) For Office Of The Asstt Director Of Industries And Commerce Rangia Dis Kamrup, Rangia Kamrup (Rural)-Assam

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us